Abstract

OBJECTIVE:

This study aimed to test a percutaneous technique for aneurysm-sac filling by means of in situ polymerisation in an in vivo model.

DESIGN:

Aortic Customize is a new endovascular treatment concept for aortic aneurysms: a non-cross-linked liquid elastomer is injected to fill the aneurysm sac around a balloon-catheter. With this method, a compliant elastomer mould with a patent lumen is created.

MATERIAL:

The formulation used in the experiments consisted of a two-component addition-cure liquid-silicone formulation, based on vinyl-terminated polydimethylsiloxane (PDMS).

METHODS:

The concept of aneurysm-sac filling was tested in vivo in porcine experiments (n = 3).

RESULTS:

In vivo porcine experiments with the sac-filling application showed successful exclusion of the created aneurysms with patent lumens and absence of endoleaks. The aneurysms were excluded successfully in the in vivo model, injecting elastomer through a 7-French catheter, filling up the entire aneurysm sac.

CONCLUSIONS:

These in vivo experiments demonstrate that the principle of aneurysm-sac filling by means of in situ curing is feasible, excluding the aneurysm and creating a new lumen. Further long-term animal experiments must be done prior to consideration of clinical application.

Copyright 2010 European Society for Vascular Surgery. Published by Elsevier Ltd. All rights reserved.