Format

Send to:

Choose Destination
See comment in PubMed Commons below
Appl Opt. 2006 Jul 10;45(20):4927-32.

Narrowband Bragg reflectors in Ti:LiNbO3 optical waveguides.

Author information

  • 1Department of Electrical Engineering, Texas A&M University, College Station, Texas 77843, USA.

Abstract

Bragg grating reflectors etched in amorphous silicon overlay films have been integrated with Ti:LiNbO3 optical waveguides to obtain a narrow (0.05 nm) reflectance spectrum with a > 20 dB dip in the transmittance spectrum. These results were realized at a wavelength of 1542.7 nm for TE polarization on an x-cut, y-propagating substrate with gratings etched to a depth of approximately 93 nm in a 105 nm thick silicon film over a length of 12.5 mm. The reflectance in the channel waveguides is found to be strongly dependent on the depth of the etched grating. The effect of the Bragg waveguide loss factor on the transmittance and reflectance spectra is investigated by using a model for contradirectional coupling that includes an attenuation coefficient. The values for coupling constants kappa and amplitude attenuation constants alpha of samples etched for different time durations to control the grating depths are obtained from the model through the use of the depth of the dips in the transmittance spectra and the spectral widths of the reflectance peaks. It is concluded that the corrugated Si overlay film increases the insertion loss by approximately 2.7 dB, and the loss is not significantly affected by the grating depth.

PMID:
16807601
[PubMed]
PubMed Commons home

PubMed Commons

0 comments
How to join PubMed Commons

    Supplemental Content

    Full text links

    Icon for Optical Society of America
    Loading ...
    Write to the Help Desk