The purpose of this study was to analyze the behavior in water as well as the mechanical and surface properties of experimental composites designed for dental restoration. Studied materials were composed of a visible-light-cured monomer mixture as a matrix (bisphenol-alpha-glycidyl methacrylate with triethyleneglycol dimethacrylate or hydroxyethyl methacrylate) and either micrometric or nanometric hydroxyapatite (HA) particles as a reinforcing filler. The surface of the filler particles was modified by using different coupling agents (citric, hydroxysuccinic, acrylic, or methacrylic acid). The hydrolytic stability of the evaluated materials was studied through elution-in-water and water-uptake tests. Mechanical and surface properties were examined through the results of flexural, hardness, and surface roughness tests. Means and standard deviations were calculated for each variable. Analysis of variance and multiple comparison tests were performed. Materials containing bisphenol-alpha-glycidyl methacrylate:triethyleneglycol dimethacrylate and micrometric-HA coated with citrate, acrylate, or methacrylate displayed the most favorable results. Improvements should be obtained by increasing the total filler amount, and by the introduction of nanometric-HA filler into a micrometric-HA reinforced composite resin system.
Copyright 2001 John Wiley & Sons, Inc. J Biomed Mater Res 56: 297-305, 2001