Logo of gseBioMed CentralBiomed Central Web Sitesearchsubmit a manuscriptregisterthis articleGenetics, Selection, Evolution : GSEJournal Front Page
Genet Sel Evol. 2012; 44(1): 14.
Published online Jun 27, 2012. doi:  10.1186/1297-9686-44-14
PMCID: PMC3384461

Simulating a base population in honey bee for molecular genetic studies

Abstract

Background

Over the past years, reports have indicated that honey bee populations are declining and that infestation by an ecto-parasitic mite (Varroa destructor) is one of the main causes. Selective breeding of resistant bees can help to prevent losses due to the parasite, but it requires that a robust breeding program and genetic evaluation are implemented. Genomic selection has emerged as an important tool in animal breeding programs and simulation studies have shown that it yields more accurate breeding value estimates, higher genetic gain and low rates of inbreeding. Since genomic selection relies on marker data, simulations conducted on a genomic dataset are a pre-requisite before selection can be implemented. Although genomic datasets have been simulated in other species undergoing genetic evaluation, simulation of a genomic dataset specific to the honey bee is required since this species has a distinct genetic and reproductive biology. Our software program was aimed at constructing a base population by simulating a random mating honey bee population. A forward-time population simulation approach was applied since it allows modeling of genetic characteristics and reproductive behavior specific to the honey bee.

Results

Our software program yielded a genomic dataset for a base population in linkage disequilibrium. In addition, information was obtained on (1) the position of markers on each chromosome, (2) allele frequency, (3) χ2 statistics for Hardy-Weinberg equilibrium, (4) a sorted list of markers with a minor allele frequency less than or equal to the input value, (5) average r2 values of linkage disequilibrium between all simulated marker loci pair for all generations and (6) average r2 value of linkage disequilibrium in the last generation for selected markers with the highest minor allele frequency.

Conclusion

We developed a software program that takes into account the genetic and reproductive biology specific to the honey bee and that can be used to constitute a genomic dataset compatible with the simulation studies necessary to optimize breeding programs. The source code together with an instruction file is freely accessible at http://msproteomics.org/Research/Misc/honeybeepopulationsimulator.html

Background

The honey bee is an economically important species that serves as a major pollinator of wild plants and agricultural crops. Over the past years, a decline of honey bee populations has been reported [1-3] mainly caused by infestation with an ecto-parasitic mite (Varroa destructor). Selective breeding of resistant bees can help prevent losses due to the parasite, but it requires that a robust breeding program and genetic evaluation are implemented. Until now, the approach used in honey bee is a traditional breeding program based on the best linear unbiased prediction (BLUP) relying on pedigree data [4]. Recently, genomic selection strategies based on molecular marker data have emerged as a promising approach [5]. Marker-based selection has been widely tested in several species either with simulated datasets e.g. [6,7] or with real datasets e.g. [8-11] but, to date, not in honey bee. Since simulation studies require molecular genetic and pedigree datasets to ascertain selection methods, our primary aim was to develop a software program capable of producing a dataset for a base population in the honey bee and which could be used to implement marker-based selection procedures. A base population is used as a starting point for simulation studies. It is composed of individuals in a pedigree for which no ancestral information is available, and is assumed to be in linkage disequilibrium (LD). The second goal of our software program was to provide the user with the possibility to investigate the effect of parameters like mutation rate, density of markers and number of individuals on the extent of LD in a population.

Implementation

Honey bee has specific genetic and reproductive characteristics, such as a high recombination rate, haplo-diploid sex determination, arrhenotoky and polyandry, which require appropriate software for modeling. The features of our software program and the modeling of population structure, genome and evolutionary processes are described below. In order to simulate a dataset according to the requirements specific to honey bee populations, it is necessary to design a software program that will allow to input: (1) number of generations, (2) number of sire queens, (3) number of dam queens, (4) number of marker loci, (5) forward and backward mutation rates, (6) minor allele frequencies and (7) number of marker loci to be selected as SNP (single nucleotide polymorphism) on the basis of minor allele frequency. The MATLAB source code and an instruction file on how to use the software program can be found on its website [12].

Setting up of the population structure

A population can be structured according to the provided input. The input data include number of sire queens and dam queens (with a ratio of 10:1), number of generations and total number of marker loci to be simulated (assumed to be bi-allelic). In order to model the haploid drones, a sire queen is defined as representing a drone-producing colony. Two matrices with a size equal to number of individuals by number of marker loci represent the genome of diploid sire queens and dam queens, respectively. The population size is kept constant in every generation according to the Fisher-Wright population model. Furthermore, all simulated generations are non-overlapping.

Genome simulation

A diploid genome, consisting of 16 linkage groups, is simulated for sire and dam queens. The length of each chromosome is simulated according to the actual length of all honey bee chromosomes. The number of marker loci (N) to be simulated along the genome can be provided as input. In the software program, the number of marker loci to be distributed per chromosome, Ni (i = 1, 2, .....16), is based on the actual proportion of SNP loci present on each honey bee chromosome and is computed using the following formula:

Number of marker locion the ith chromosome,Ni=NRi
(1)

where Ri is equal to the actual ratio between number of SNP loci on the ith chromosome and total number of SNP loci in the honey bee genome. Positions of all the loci on all chromosomes are sampled from a uniform distribution. The number of SNP loci per chromosome and the length of all 16 chromosomes were obtained from the honey bee genome database [13,14] as shown in Table Table11.

Table 1
Summary of the simulated chromosome length, number of SNP and Ri

Evolution simulation

To simulate an evolutionary process, recombination and mutation are implemented during the process of gamete formation in every generation. Multiple mating is modeled in the parental generations. The processes are briefly described below.

Recombination

Recombination is the exchange of chromosomal segments between paternal and maternal chromosomes and is implemented as follows. The recombination probability (θ) between two adjacent loci on a chromosome is calculated from the Haldane mapping function [15], which is the most widely used mapping function. It is based on the assumption that crossovers in any given chromosomal segment follow a Poisson distribution, with no interference between crossovers. In the software program, the recombination probability is calculated using the following expression:

θ=121exp2|x|
(2)

where exp denotes the exponential function and |x| stands for the absolute value of the map distance between adjacent loci. The Haldane mapping function requires that distances are expressed in Morgan units, therefore, distances between adjacent loci are converted from base-pairs to Morgan using the reported recombination rate of 19 cM/Mb [16,17].

Mutation

Mutation is implemented in our software program to create polymorphisms. All loci in all individuals belonging to generation zero have a single allele coded as 1. We model both forward and backward mutations, allowing each locus to mutate from allele 1 to allele 2 and from allele 2 to allele 1. The required rates of forward and backward mutations can be specified in the input as mutation rates per locus per gamete per generation. The advantage of modeling a bi-directional mutation is that different values of forward and backward mutation rates can be chosen. Setting the backward mutation rate to zero will result in an infinite site model of mutation [18] where each locus can only mutate once in the entire generation and mutation will result in the formation of allele 2. The infinite site model of mutation can be useful when simulating an extremely high initial marker density with a low mutation rate and larger number of generations as shown in studies by Sorrenson and Meuwissen [6] and Calus et al. [19], where 1 million and 300 000 marker loci were simulated for a genome of size 10 M and 3 M, respectively.

Multiple mating

Figure Figure11 describes the general mating scheme followed during the simulation. Polyandry, commonly referred to as multiple mating, is a phenomenon observed in honey bee whereby a queen mates with multiple drones (average of 10 to 20 drones). To model this situation in our software program, a dam queen and a group of 10 sire queens (a sire queen represents a drone-producing colony) are assumed as mating partners. To form groups, all sire queens are randomly permuted and thereafter divided into groups consisting of 10 sire queens.

Figure 1
General mating scheme. m = total number of dam queens; since there is a 1:10 ratio between number of dams and sires, the number of sire queens is “mx10”; in every generation, all sire queens are randomly permuted and grouped; ...

A detailed mating scheme, showing how gametes from a dam queen are combined with the drones from a group of sire queens is illustrated in Figure Figure2.2. A dam queen generates a total of 11 gametes, of which 10 give rise to sire queens and one a dam queen in the next generation. Since a gamete produced by a sire queen is regarded as a drone, it is assumed to occur in multiple copies. One of the 10 sire queens of a group contributes a drone, which combines with a gamete from the dam queen to produce a new dam queen for the next generation. In addition to the drone generated for the formation of a dam queen, each of the 10 sire queens of a group produces one drone, thus a group contributes a total of 11 drones. During the formation of a sire queen, all 11 drones of a group have an equal probability to be drawn as a gamete. Since drones in a set are sampled with replacement, the resulting progenies are related as super-sibs (coefficient of relatedness = 0.75), full-sibs (coefficient of relatedness = 0.5) or half-sibs (coefficient of relatedness = 0.25).

Figure 2
Multiple mating between a dam queen and 11 drones from a group. The resulting offspring consist of one dam queen and 10 sire queens; all drones are sampled with replacement which models the phenomenon of producing multiple copies of identical gametes ...

Statistics

The software program provides statistics for allele frequency, Hardy-Weinberg equilibrium, minor allele frequency and LD, which allow inferences to be made about an evolving population. Allele frequency data is a requisite for any population; hence the software program creates an output with allele frequencies for all loci in the base population along with the output for Hardy-Weinberg equilibrium and minor allele frequency, which are the usual criteria to evaluate marker loci informativeness. Most studies based on genome-wide marker data rely on the assumption that a marker and the locus affecting the trait are in LD, therefore, in the last generation, the average LD value is calculated for selected SNP with the highest minor allele frequency. In addition, generation-wise LD values for all simulated marker loci pairs are calculated and plotted on a graph. As a measure of LD, we used r2[20,21] which was calculated as follows:

r2=D2f(A1)f(A2)f(B1)f(B2)
(3)

where D = f (A1B1)f (A2B2)  f (A1B2)f (A2B1) and f (A1B1), f (A2B2), f (A1B2), f (A2B1), f (A1), f (A2), f (B1), f (B2) are observed frequencies of haplotypes A1B1, A2B2, A1B2, A2B1 and of alleles A1, A2, B1, B2 respectively in the population.

Results and discussion

The software program developed in this study produces the following output: (1) the position of marker loci in base-pairs on each chromosome, (2) genotypes of all simulated individuals in the last generation, which can be used as a base population in further studies, (3) average r2 values of LD for all simulated marker loci pair for every simulated generation as a plot as well as a text file, (4) average r2 value of LD for the selected SNP with the highest minor allele frequency in the last generation, (5) allele frequencies for all loci in the base generation, (6) χ2 statistics for Hardy-Weinberg equilibrium for all loci in the base generation and (7) a list of marker loci with a minor allele frequency smaller than or equal to the input value.

Example

To provide an illustration, we performed a run as example with the following input parameters:

Number of generations: 2000

Number of sire and dam queens: two population sizes were simulated; the first one consisted of 500 sire and 50 dam queens and the second one of 200 sire and 20 dam queens.

Total number of marker loci: 100 000

Number of marker loci to be selected as SNP: 44 000

Forward and backward mutation rates: 0.0025

Minor allele frequency: 0.05

The values of mutation rate, recombination rate, marker density and effective population size determine both the level of LD in a population and the number of generations required to reach a certain value of LD. For the dataset example, the chosen mutation rate was set at 0.0025, a value similar to that used by Meuwissen et al. [5], allowing a high probability of polymorphic marker loci. Information on the level of recombination and on the effective population size (Ne) in honey bee was obtained from Beye et al. [17] and Estoup et al. [22], respectively.

All data and result files for this example can be found at the project home page [12]. In this paper, we only present the output graph (Figure (Figure3)3) showing the establishment of LD for the simulated dataset with 220 queens. The graph shows the average LD reached in each generation and was obtained by calculating the average of LD value between all simulated pair of marker loci across the genome, not preselected on the basis of minor allele frequency.

Figure 3
The average value of r2plotted against number of generations for the input parameter values. Simulation was performed for 2000 generations with a forward and backward mutation rate of 0.0025 for 100 000 marker loci and 220 colonies (20 dam queens and ...

In addition, we compared the expected average LD to the achieved average LD for 44 000 loci with the highest minor allele frequencies, which were chosen as SNP. The expected average LD in a population was calculated as follows [21]:

r2=5+2Nec11+26Nec+8Ne2c2
(4)

where c is the recombination fraction between adjacent loci and Ne is the effective population size. Since the total size of the simulated genome was 219 629 612 base-pairs (Table (Table1)1) and the approximate recombination rate was taken as 19 cM/Mb [16,17], the size of the simulated genome was 41.73 M. Thus, for a genome of 41.73 M, c was approximately 0.001 for 44 000 SNP. The honey bee population has a wide range of effective population sizes [22]; therefore, we simulated two scenarios, one with 220 queens and other with 550 queens, respectively. The effective population size in the honey bee was calculated using the following expression for a haplo-diploid population [23,24]:

Ne=9NfNm22Nm+Nf
(5)

where Nf is the number of queens (which is equal to the number of colonies since each colony is headed by a single queen) and Nm is the number of males. In the simulation, we assume that each queen is inseminated by 11 drones, therefore Nm = 11Nf. Thus, with 220 and 550 colonies, Ne was approximately 473 and 1184, respectively. With Ne = 473, the expected LD was 0.24 and the achieved LD was 0.23. Similarly, with Ne = 1184, the expected and achieved LD were equal to 0.14 and 0.11, respectively. These values show that our software program is able to model the honey bee population with good accuracy.

Creating a dataset for a base population is a prerequisite for any simulation study, but it can be time consuming and it requires testing of optimum parameters. In most of the available software used to simulate populations [25], base population simulation is the preliminary stage, and is done by allowing the population to evolve through a burn-in period till the population reaches equilibrium from a random or uniform initial state. In our software program, all individuals in the starting generation are assumed to be unrelated. To establish LD, random mating is performed for the required number of generations and the final generation, which is in mutation-drift equilibrium, is taken as the base population. In genomic selection studies, a base population is the common starting point from which a population evolves further according to specific study requirements. To the best of our knowledge, this is the first software program that deals with evolutionary aspects in honey bee. It aims at providing an impetus to simulation studies in honey bee. It is an important initiative and we are developing strategies to simulate other honey bee datasets that could be used to implement genomic selection and furthermore to extend the study with a real genotyping dataset obtained from the SNP assay developed for honey bee [26]. The code is written in MATLAB but can be easily adapted to the open source version Octave.

Conclusions

Our software program can construct a base population in LD by simulating a random mating honey bee population given some input population parameters. The statistics relevant to a population such as allele frequency, r2 value for LD and data for marker sorting according to minor allele frequency and Hardy-Weinberg equilibrium are provided in output files. The software program is relevant for research requiring a simulated molecular genetic honey bee dataset such as studies aiming at optimizing honey bee breeding programs.

Availability and requirements

Project name: Honey Bee Population Simulator

Project home page: http://msproteomics.org/Research/Misc/honeybeepopulationsimulator.html

Operating system(s): Platform independent

Programming language: MATLAB

Other requirements: Tested for MATLAB version 7.9.0.529 (R2009b) and higher

License: The source code is available free of charge

Any restrictions to use by non-academics: none

Abbreviations

BLUP = Best Linear Unbiased Prediction; LD = Linkage Disequilibrium; SNP = Single Nucleotide Polymorphism.

Competing interests

The authors declare that they have no competing interests.

Authors' contributions

PG wrote the manuscript and developed the software program. AS and TC participated in discussions and helped to draft the manuscript. NR and KB conceived the study, participated in discussions and helped to draft the manuscript. All authors read and approved the final manuscript.

Acknowledgements

The work was a part of the project "Marker-assisted selection of Varroa-tolerant honey bees" financially supported by the German Federal Ministry of Food, Agriculture and Consumer Protection (BMELV) [2808HS009]. We would also like to express our gratitude to Dr. K. Ehrhardt for fruitful discussions.

References

  • De la Rúa P, Jaffé R, Dall’Olio R, Mũnoz I, Serrano J. Biodiversity, conservation and current threats to European honeybees. Apidologie. 2009;40:263–284. doi: 10.1051/apido/2009027. [Cross Ref]
  • Brown MJF, Paxton RJ. The conservation of bees: a global perspective. Apidologie. 2009;40:410–416. doi: 10.1051/apido/2009019. [Cross Ref]
  • Neumann P, Carreck NL. Honey bee colony losses. J Apic Res. 2010;49:1–6. doi: 10.3896/IBRA.1.49.1.01. [Cross Ref]
  • Bienefeld K, Ehrhardt K, Reinhardt F. Genetic evaluation in the honey bee considering queen and worker effects - a BLUP-Animal Model approach. Apidologie. 2007;38:77–85. doi: 10.1051/apido:2006050. [Cross Ref]
  • Meuwissen THE, Hayes BJ, Goddard ME. Prediction of total genetic value using genome-wide dense marker maps. Genetics. 2001;157:1819–1829. [PMC free article] [PubMed]
  • Sonesson AK, Meuwissen THE. Testing strategies for genomic selection in aquaculture breeding programs. Genet Sel Evol. 2009;41:37. doi: 10.1186/1297-9686-41-37. [PMC free article] [PubMed] [Cross Ref]
  • Christensen OF, Lund MS. Genomic prediction when some animals are not genotyped. Genet Sel Evol. 2010;42:2. doi: 10.1186/1297-9686-42-2. [PMC free article] [PubMed] [Cross Ref]
  • Dekkers JCM, Hospital F. The use of molecular genetics in the improvement of agricultural populations. Nat Rev Genet. 2002;3:22–32. doi: 10.1038/nrg701. [PubMed] [Cross Ref]
  • de Roos APW, Schrooten C, Mullaart E, Calus MPL, Veerkamp RF. Breeding value estimation for fat percentage using dense markers on Bos taurus autosome 14. J Dairy Sci. 2007;90:4821–4829. doi: 10.3168/jds.2007-0158. [PubMed] [Cross Ref]
  • Legarra A, Robert-Granié C, Manfredi E, Elsen JM. Performance of genomic selection in mice. Genetics. 2008;180:611–618. doi: 10.1534/genetics.108.088575. [PMC free article] [PubMed] [Cross Ref]
  • Aguilar I, Misztal I, Johnson DL, Legarra A, Tsuruta S, Lawlor TJ. Hot topic: a unified approach to utilize phenotypic, full pedigree, and genomic information for genetic evaluation of Holstein final score. J Dairy Sci. 2010;93:743–752. doi: 10.3168/jds.2009-2730. [PubMed] [Cross Ref]
  • Honey Bee Population Simulator. http://msproteomics.org/Research/Misc/honeybeepopulationsimulator.html
  • Honey Bee Genome Project. http://www.hgsc.bcm.tmc.edu/projects/honeybee/
  • Honey Bee Genome Resources. http://www.ncbi.nlm.nih.gov/projects/genome/guide/bee/
  • Haldane JBS. The combination of linkage values and the calculation of distances between the loci of linked factors. J Genet. 1919;8:299–309.
  • The Honeybee Genome Sequencing Consortium. Insights into social insects from the genome of the honeybee Apis mellifera. Nature. 2006;443:931–949. doi: 10.1038/nature05260. [PMC free article] [PubMed] [Cross Ref]
  • Beye M, Gattermeier I, Hasselmann M, Gempe T, Schioett M, Baines JF, Schlipalius D, Mougel F, Emore C, Rueppell O, Sirviö A, Guzmán-Novoa E, Hunt G, Solignac M, Page RE. Exceptionally high levels of recombination across the honey bee genome. Genome Res. 2006;16:1339–1344. doi: 10.1101/gr.5680406. [PMC free article] [PubMed] [Cross Ref]
  • Kimura M. The number of heterozygous nucleotide sites maintained in a finite population due to steady flux of mutations. Genetics. 1969;61:893–903. [PMC free article] [PubMed]
  • Calus MPL, Meuwissen THE, de Roos APW, Veerkamp RF. Accuracy of genomic selection using different methods to define haplotypes. Genetics. 2008;178:553–561. doi: 10.1534/genetics.107.080838. [PMC free article] [PubMed] [Cross Ref]
  • Hill WG, Robertson A. Linkage disequilibrium in finite populations. Theor Appl Genet. 1968;38:226–231. doi: 10.1007/BF01245622. [PubMed] [Cross Ref]
  • Hill WG. Linkage disequilibrium among multiple neutral alleles produced by mutation in finite population. Theor Popul Biol. 1975;8:117–126. doi: 10.1016/0040-5809(75)90028-3. [PubMed] [Cross Ref]
  • Estoup A, Garnery L, Solignac M, Cornuet JM. Microsatellite variation in Honey Bee (Apis Mellifera L.) populations: hierarchical genetic structure and test of the infinite allele and stepwise mutation models. Genetics. 1995;140:679–695. [PMC free article] [PubMed]
  • Wright S. Inbreeding and homozygosis. Proc Natl Acad Sci. 1933;19:411–420. doi: 10.1073/pnas.19.4.411. [PMC free article] [PubMed] [Cross Ref]
  • Kerr WE. Multiples alleles and genetic load in bees. J Apic Res. 1967;6:61–64.
  • Peng B, Kimmel M. SimuPOP: a forward-time population genetics simulation environment. Bioinformatics. 2005;21:3686–3687. doi: 10.1093/bioinformatics/bti584. [PubMed] [Cross Ref]
  • Spötter A, Gupta P, Nürnberg G, Reinsch N, Bienefeld K. Development of a 44K SNP assay focussing on the analysis of a varroa-specific defense behavior in honey bees (Apis mellifera carnica) Mol Ecol Resour. 2012;12:323–332. doi: 10.1111/j.1755-0998.2011.03106.x. [PubMed] [Cross Ref]

Articles from Genetics, Selection, Evolution : GSE are provided here courtesy of BioMed Central
PubReader format: click here to try

Formats:

Related citations in PubMed

See reviews...See all...

Cited by other articles in PMC

Links

Recent Activity

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

See more...