• We are sorry, but NCBI web applications do not support your browser and may not function properly. More information
Logo of bmcmicrBioMed Centralsearchsubmit a manuscriptregisterthis articleBMC Microbiology
BMC Microbiol. 2011; 11: 174.
Published online Aug 2, 2011. doi:  10.1186/1471-2180-11-174
PMCID: PMC3166277

Factors influencing lysis time stochasticity in bacteriophage λ

Abstract

Background

Despite identical genotypes and seemingly uniform environments, stochastic gene expression and other dynamic intracellular processes can produce considerable phenotypic diversity within clonal microbes. One trait that provides a good model to explore the molecular basis of stochastic variation is the timing of host lysis by bacteriophage (phage).

Results

Individual lysis events of thermally-inducible λ lysogens were observed using a temperature-controlled perfusion chamber mounted on an inverted microscope. Both mean lysis time (MLT) and its associated standard deviation (SD) were estimated. Using the SD as a measure of lysis time stochasticity, we showed that lysogenic cells in controlled environments varied widely in lysis times, and that the level of lysis time stochasticity depended on allelic variation in the holin sequence, late promoter (pR') activity, and host growth rate. In general, the MLT was positively correlated with the SD. Both lower pR' activities and lower host growth rates resulted in larger SDs. Results from premature lysis, induced by adding KCN at different time points after lysogen induction, showed a negative correlation between the timing of KCN addition and lysis time stochasticity.

Conclusions

Taken together with results published by others, we conclude that a large fraction of λ lysis time stochasticity is the result of random events following the expression and diffusion of the holin protein. Consequently, factors influencing the timing of reaching critical holin concentrations in the cell membrane, such as holin production rate, strongly influence the mean lysis time and the lysis time stochasticity.

Background

Some phenotypic variation arises from randomness in cellular processes despite identical environments and genotypes [1-9]. Population heterogeneity, resulting from such molecular stochasticity, has been documented in many microbial organisms including bacteriophage (phage) λ [10-13], Escherichia coli [14-16], Bacillus subtilis [17,18] and Saccharomyces cerevisiae [19-24]. This within-population variation can have far reaching life history consequences. For example, experimentally reducing noise in the expression of ComK decreased the number of competent B. subtilis cells in one study [18]. In another study, mutants of S. cerevisiae showing greater heterogeneity in survival had higher rates of occasional-cell survival during high stress conditions than did wild-type cells [25].

Because of their simplicity and ease of manipulation, phages are excellent models to explore the life history consequences of molecular stochasticity. Many phages use a "holin-endolysin" system to compromise two physical barriers, the cell membrane and the peptidoglycan layer, in order to lyse an infected host cell [26,27]. Although there are some variations on the theme, holin usually forms a hole(s) in the inner membrane, thus either allowing soluble endolysin into the periplasmic space [28,29] or activating the membrane-tethered endolysin already translocated to the periplasm [30-32]. Endolysin then digests the peptidoglycan, causing host cell lysis.

The most extensively studied lysis system is that of phage l, which consists of four genes: S (encodes holin and antiholin), R (encodes endolysin), Rz, and Rz1 (encode an integral inner membrane protein and an outer membrane lipoprotein, respectively). All genes are co-transcribed from the late promoter pR' during the late phase of the lytic cycle [26,27,33,34]. Under typical laboratory conditions, only S and R are needed for host lysis, though both Rz and Rz1 are essential in the presence of high concentrations of divalent cations [33-35].

The lytic pathway of phage λ is commonly divided into the early, delayed early, and late phases. Transitions between stages are triggered by well-characterized molecular actions involving gene transcription and translation [36]. Consequently, the timing of when individual cells enter each phase greatly influences the length of individual lysis times. A recent study by Amir et al. [10] showed that 69% of the total lysis time variance is due to variation in the time interval between the onset of the pR' promoter and the eventual lysis (see APPENDIX A). This observation suggests that a large portion of the observed lysis time stochasticity is a de novo phenomenon, confined to the production and accumulation of holin proteins in the cell membrane, rather than a direct carryover from the various upstream stochastic events.

The formation of the λ holin hole in the membrane is hypothesized to be a multi-step process that starts with the transcription of the late mRNA and the translation of the S holin protein. The resulting holin monomers are then inserted into the cell membrane, where they dimerize, then oligomerize [37], eventually leading to the formation of higher-order holin aggregates, or rafts, in the cell membrane. At a time that is specific to the holin protein sequence, the holin rafts are transformed into a membrane lesion(s) > 300 nm across [38], which is large enough for the passage of a 500 KDa protein [28,29]. Lysis ensues after endolysin digests the peptidoglycan. Thus, by regulating endolysin's access to the peptidoglycan, holin controls the timing of lysis [26,27].

To formalize the heuristic model of holin hole formation described by Wang et al. [28], Ryan and Rutenberg [39] proposed a two-stage nucleation model, in which the production rate of the holin monomers and holin self-affinity contribute to the aggregation of holin rafts. Raft aggregation is opposed by thermal Brownian motion which tends to disintegrate rafts into their holin constituents. As the rafts grow and then exceed a certain critical size (the first stage of nucleation), the probability of a second stage nucleation (triggering to hole formation) increases (Figure (Figure1).1). According to this model, lysis time stochasticity is the inevitable outcome of each infected cell in the population following its own time course of growth in holin raft size. However, a recent study [40] using C-terminus GFP-fused λ S holin protein showed that, for most of the latent period, holin proteins are distributed uniformly in a relatively mobile state in the cell membrane. At a time that coincided with the triggering time, large immobile holin rafts suddenly appeared in the membrane. The transition from uniformly distributed holin to holin rafts occurred in less than a minute. Although it is not clear whether these large rafts correspond to the membrane holes observed by cryoelectron microscopy [38], this study nevertheless casts doubt on the previously hypothesized importance of holin raft size growth as the determining factor in lysis timing [28,39]. Rather, it is proposed that the lysis time is determined by when a critical holin concentration is reached in the cell membrane (Figure (Figure1).1). According to this model, lysis time stochasticity is mainly the result of variation in the timing of reaching the critical holin concentration in the membrane.

Figure 1
Schematic presentation of two models of holin hole formation. Holin monomers (shaded circles) are produced in the cytoplasm, and then transported to the cell membrane (a top-down view of the cell membrane thereafter) where they dimerize. A previous model ...

Typically, the lysis time of a phage is estimated using a one-step growth curve [41-43]. In the case of phage λ, however, the availability of thermally-inducible E. coli λ lysogens allows a more precise determination of the lysis time by following the decline of culture turbidity [26,44]. Direct observation of the lysis of individual λ lysogenic cells [45] confirmed that the precipitous decline of culture turbidity, commonly observed among thermally-induced λ lysogen cultures, is a reflection of the saltatory nature of individual lysis events at the microscopic level. However, it is not clear to what extent the seemingly high synchronicity of lysis is influenced by various aspects of phage biology and host growth conditions. In this study, we used a simple experimental setup to assess how lysis time stochasticity is affected by allelic variation in the S protein, late promoter pR' activity, host growth rate, and the timing of energy poison KCN addition. Our results establish the ranges and limits of lysis time stochasticity under various conditions.

Results

Using a microscope-mounted, temperature-controlled perfusion chamber, we observed and recorded individual lysis events of thermally-induced Escherichia coli l lysogens (Figure (Figure2A).2A). These observations revealed a considerable amount of variation in lysis time for the wild-type (WT) λ phage (Table (Table1;1; Figure Figure2B).2B). Although the mean lysis time for the WT λ phage was 65.1 min, lysis times for individual lysogenic cells ranged from 45.4 to 74.5 min. Given that phage progeny accumulate linearly at ~7.7 phage per minute beginning ~28 min after lysis induction [46], the ~30 min range of lysis times could result in a three-fold difference in burst size between phages that lyse early and those that lyse late. This result motivated further exploration of variation in lysis time among other λ strains.

Table 1
Effects of holin allelic sequences on the stochasticity of lysis time.
Figure 2
Samples of a lysis recording and frequency distributions of various experimental treatments. (A) Sample recordings from strain IN63. It takes about 5 sec for the upper left cell to disappear from view. (B) Sample frequency distributions of lysis times ...

Effect of allelic variation in holin sequence

It has long been known that different holin alleles show different lysis times [37,46,47]. However, it is not clear to what extent allelic differences in holin protein would affect the lysis timing of individual cells. To gain further insight, we determined the MLTs (mean lysis times) and SDs (standard deviations) of lysis time for 14 isogenic l lysogens differing in their S holin sequences (see APPENDIX B for our rationale for using SD as the measure for lysis time stochasticity). The directly observed MLTs (Table (Table1)1) were longer than those reported previously [46]. This discrepancy was mainly due to the fact that, in previous work, lysis time was defined by the time point when the turbidity of the lysogen culture began to decline, whereas in our current measurement, it was the mean of all individual lysis times observed for a particular phage strain.

Figure Figure3A3A revealed a significant positive relationship between MLT and SD (F[1,12] = 8.42, p = 0.0133). However, we did not observe a significant relationship between MLT and another commonly used measure of stochasticity, the coefficient of variation (CV, defined as SD/MLT; [15,25,48,49]) (F[1,12] = 1.50, p = 0.2445), indicating a proportional increase of the SD with the MLT. Figure Figure3A3A also reveals a relatively scattered relationship between the MLTs and the SDs (adjusted R2 = 0.363), with several instances in which strains with similar MLTs are accompanied by very different SDs. For example, the mean lysis times for IN56 and IN71 were 65.1 and 68.8 min, but the SDs were 3.2 and 7.7 min, respectively. Apparently the observed positive relationship is only a general trend, not an absolute. The scattering of the plot also suggests that different missense mutations in the holin sequence can influence MLT and SD somewhat independently.

Figure 3
Factors influencing λ lysis time stochasticity. (A) Effect of allelic variation in holin proteins on mean lysis times (MLTs) and standard deviations (SDs). (B) Effect of λ's late promoter pR' activity [50] on MLTs, SDs and CVs (coefficients ...

Effect of late promoter pR' activity

Transcription of the late genes, including the holin gene S, from the pR' promoter marks the beginning of the late stage of the λ lytic development [36]. Since the major determinant of lysis time is thought to be when a critical holin concentration is reached in the cell membrane [40], reduced promoter activity should not only lengthen the lysis time, as shown in a previous study [50], but should also increase the lysis time stochasticity [51,52].

As shown in Figure Figure3B,3B, our data showed a negative relationship between the pR' activity, and the MLTs, SDs, and CVs. However, the increase of the pR' activity had a diminishing influence on both the MLTs, as has been shown previously [50], and the associated SDs and CVs (see Table Table2).2). Interestingly, linear regressions (Figure (Figure3C)3C) showed a much tighter, positive relationship between the MLTs and the SDs (F[1,3] = 81.04, p = 0.0029; adjusted R2 = 0.952; y = -15.7 + 0.3x) and a significant positive relationship between the MLTs and CVs (F[1,3] = 14.51, p = 0.0318, result not shown in the figure). That is, for the WT S gene, every 1 minute increase in the MLT corresponds to 0.3 minute increase in lysis time stochasticity.

Table 2
Effect of late promoter activity, lysogen growth rate and KCN addition on the stochasticity of lysis time.

Effect of Host Growth Rates

In general, cells growing at a faster rate have higher concentrations of various biosynthesis machineries [53]. Since the expression of the phage holin gene is entirely dependent on the host, we hypothesized that a lower host growth rate would lead to a lower rate of holin protein synthesis, thus resulting in a longer lysis time and increased lysis time stochasticity. In the phage T4, it was shown that lysis time was negatively correlated with host growth rate [54].

We determined the MLTs and SDs for wild-type l lysogen grown in four different growth media: standard LB (lysogeny broth [55]), 20% LB, Davis minimal salts medium (DM) with 20 mM glucose, and DM with 40 mM glycerol, resulting in growth rates of 1.01 ± 0.07, 0.93 ± 0.05, 0.49 ± 0.04, and 0.35 ± 0.01 h-1 (mean ± 95% confidence limits), respectively (see Table Table2).2). As shown in Figure Figure3D,3D, lower growth rates led to increased lysis time SDs (F[1,2] = 24.50, p = 0.0385) and CVs (F[1,2] = 46.24, p = 0.0209). A similar negative relationship was also apparent for the MLTs. However, because of the case of the LB medium, in which the higher growth rate actually resulted in a slightly longer MLT, the observed negative relationship was not significant (F[1,2] = 6.44, p = 0.1265). Interestingly, neither the SDs (F[1,2] = 16.11, p = 0.0568) nor the CVs (F[1,2] = 6.04, p = 0.133) was significantly associated with the MLTs.

Effects of KCN Addition

The energy poison potassium cyanide, KCN, has long been used in phage research to trigger premature lysis [43]. Typically, after KCN addition, culture turbidity declines precipitously [44], indicating that individual lysis events are relatively synchronous. The KCN-induced premature lysis is thought to be mediated through a collapsed proton motive force (PMF) resulting from a inhibition of the bacterial respiratory chain. As has been shown with λ S holin, a 40% drop in the PMF triggers lysis [45]. Without a constant supply of ATP, the production of holin protein would also be terminated. If KCN is added soon after thermal induction of the lysogen culture, few holin proteins would have been made before the termination of holin production. Consequently, it should take a longer time for the holin proteins in the membrane to transition from a diffused state to aggregated rafts. Therefore, after the cessation of holin production by KCN addition, it may take a longer time, on average, before any lysis events are observed. On the other hand, if KCN is added late, a larger proportion of the thermally-induced lysogenic cells should have accumulated enough holin proteins in the cell membrane such that they could be triggered to form holin holes quickly. That is, the addition of KCN should prompt the rapid formation of holin holes, thus resulting in an almost immediate and synchronous lysis of most of the cells in the population. Based on the aforementioned scenarios, we expected that (1) the time delay between the time of KCN addition (tKCN) and the eventual mean lysis time (tL) (i.e., tL - tKCN) would be negatively correlated with the timing of KCN addition, and (2) tKCN would be negatively correlated with lysis time stochasticity.

Figure Figure4A4A shows a significant negative relationship between tL - tKCN and tKCN. As KCN was added later in time (i. e., closer to the normal lysis time of 65.1 min), the time delay between addition of KCN and the MLT was reduced (a quadratic fit, F[2,4] = 12.87, p = 0.0181, adjusted R2 = 0.798). In fact, when added 55 min after induction (i.e., 10 min before the normal MLT), the time delay was only 2.6 min, almost instantaneous when compared to the 2 min sampling rate of the sipper-equipped spectrophotometer method of lysis time determination [46]. Interestingly, a theoretical study of lysis time stochasticity by Ryan and Rutenberg also showed a seemingly convex relationship between tL - tKCN and tKCN [[39], their figure five].

Figure 4
Effects of tKCN (timing of KCN addition). (A) On time delay tL - tKCN. The solid curve shows the quadratic fit of y = 54.52 - 1.09x + 0.02(x - 36.57)2. Error bars indicate the associated SDs. As an example, when tKCN = 45 min, the observed tL is 50.11 ...

The effects of tKCN on lysis time SDs and CVs are shown in Figure Figure4B.4B. Again, we witnessed the expected pattern of a significant negative relationship between tKCN and the SDs (a quadratic fit, F[2,4] = 9.91, p = 0.0123, adjusted R2 = 0.748) and between tKCN and the CVs (a quadratic fit, F[2,4] = 16.03, p = 0.0282, adjusted R2 = 0.834). These results showed that the later in time KCN was added, the less variation there was in individual lysis times. In fact, the lowest SD (1.45 min) and lowest CV (2.53%) were observed when KCN was added 55 min after induction. This was a significant two-fold reduction in the SD when compared normal lysis conditions (see Table Table11 for strain IN56 with the SD = 3.24 min; Student's t = 15.45, p < 0.0001, using the standard deviation for the SD in Box 7.1 of [56]). This observation indicated that individual triggering for hole formation during the normal progression of cell lysis was relatively asynchronous when compared to the artificial method of acute triggering by KCN addition.

Similar to the effect of growth rate, a linear regression of the SDs (F[1,5] = 0.60, p = 0.4726) or CVs (F[1,5] = 0.328, p = 0.5917) against the MLTs did not yield significant result. Another interesting aspect of the relationship between tKCN and the lysis time SDs is that the SDs drop precipitously when KCN is added about 35 min after induction. This observation suggests that, approximately 35 min after thermal induction, the majority of the lysogenic cells have accumulated enough holin proteins in the cell membrane to form holes immediately if triggered.

Discussion

The current model of holin hole formation hypothesizes that λ phage lysis timing is mainly determined by when a critical concentration of holin proteins is reached in the cell membrane [40] (Figure (Figure1,1, dark arrows). According to this model, any factor that influences the holin protein production should also affect the timing of lysis. Furthermore, the realized rate of holin production in each cell should also be subjected to stochastic influences impacting the various upstream biochemical reactions, such as gene transcription and translation, that lead to holin production. As has been shown by others, the lower the average rates of the biochemical reactions, the more prominent the cell-to-cell variation is [51,52].

Manipulation of holin production rate

In our study, we manipulated the holin production rate by manipulating the λ pR' activity and the lysogen growth rate. We observed that, in general, treatments expected to result in higher holin production rates (e.g., high pR' activity or high lysogen growth rate) also resulted in shorter MLTs and smaller SDs (Figure (Figure3B3B and and3D).3D). Furthermore, it was surprising that the combined MLTs and SDs, despite being from two different experimental treatments, namely pR' activity and lysogen growth rate, showed almost identical positive correlations, even after excluding the far-flung data point with the longest MLT and largest SD (obtained with strain SYP028, see Table Table2)2) from the analysis (Figure (Figure3C).3C). This result suggests that, irrespective of how the MLT was achieved, as long as the MLTs are the same, we should expect to observe similar SDs. For the wild-type λ S holin sequence, any factor that results in 1.0 min increase in MLT would be accompanied by a concomitant 0.3 min increase in the SD. It would be interesting to conduct a similar experiment with different holin sequences to see if the rate of SD increase is sequence-specific.

Regarding the effects of host growth rate on lysis time stochasticity, it is interesting to note the following. Amir et al. [10] found that the MLTs, SDs, and CVs, following UV induction, ranged from 72 min, 9 min, and 12.5% respectively for λ lysogens alone to 99 min, 14 min, and 14.1% respectively for λ lysogens carrying pR-GFP reporter plasmid and 117 min, 19 min, and 15.8% respectively for λ lysogens carrying pR'-tR'-GFP reporter plasmid (all values are extracted from their figures six A and B). Since their λ lysogens were grown in M9 minimal salts medium plus various growth factors and 0.4% glucose at 37°C, it is similar to our Davis minimal salts medium with glucose, from which we obtained the comparable values of 70.3 min, 6.3 min, and 8.96% respectively (see Table Table2).2). It is not clear whether the difference between these two SDs is the result of different methods used for lysogen induction (thermal vs. UV induction) or different growth media, but the MLTs are virtually identical. Their result also indirectly confirmed our current result that host physiology (which is presumably somewhat perturbed in their lysogen strains carrying the medium-copy reporter plasmids) would affect the overall MLTs and SDs of lysis time.

Manipulation of holin protein sequence

Barring potential post-translational modifications due to differences in holin protein sequence (e.g., differential rate in proteolysis), isogenic λ strains expressing different holin sequences would have a similar average rate of holin accumulation in the membrane and consequently the same distribution of holin proteins among the cells across different lysogen populations. That is, at any given moment, we would expect a certain proportion of cells to accumulate a certain number of holin molecules in the membrane, irrespective of the holin sequences. The observed differences in MLTs, as the result of differences in holin sequence, can be seen as a reflection of different set-points for critical concentrations in an increasingly crowded cell membrane [40]. Presumably, a sequence with a lower set-point would not only result in a shorter MLT, but also a smaller SD as well. However, the existence of similar MLTs, but very different SDs, suggests that missense mutations in the holin sequence not only affect the set-point for spontaneous triggering, but also impact the robustness of the set-point. For example, some mutations may be relatively insensitive to the critical holin concentration, thus resulting in proportionally more cells that are triggered earlier and later than expected, hence greater lysis time stochasticity.

Effect of energy poison KCN

It is well known that addition of the energy poison, KCN, to induced lysogen cultures will accelerate the onset of lysis [44]. Our results also confirmed this observation (see Table Table2).2). However, it is not clear how this accelerated lysis would affect the lysis time stochasticity. From anecdotal observations, the addition of KCN seems to synchronize lysis, thus resulting in a precipitous decline of lysogen culture turbidity. Our study showed that the timing of KCN addition was inversely related to lysis time stochasticity (see Figure Figure4B).4B). In fact, the smallest SD (1.45 min) was achieved by adding KCN at 55 min after thermal induction (see Table Table2),2), a time where normally only about 1% of the cells have lysed. The almost synchronous lysis when KCN was added 55 min post thermal induction suggests that most cells would have already accumulated enough holin proteins in the cell membrane to form a hole.

Besides collapsing the PMF, the addition of KCN should also halt the production of holin protein, thus "fixes" the amount of holin proteins on the cell membrane at the time of addition. The progressive decline in lysis time stochasticity as KCN was added later in time (see Figure Figure4B)4B) strongly suggests that a larger supply of holin protein is a key factor in ensuring synchronous lysis. As more holin proteins are inserted into the cell membrane, the kinetics of raft formation gradually shifts from stochastic to deterministic and synchronous. In fact, there was a nearly five-fold decrease in lysis time stochasticity when the PMF was collapsed at 55 min after lysogen induction when compared to collapse at 25 min (see Table Table2).2). It is also noted that the properties of the normally triggered and the prematurely triggered holin holes are quite distinct, with the prematurely triggered holes being much smaller than the normally triggered holes [28].

Evolutionary implication of lysis time stochasticity

Both theoretical and experimental studies have demonstrated the importance of lysis timing on phage fitness [46,57-61]. However, it is not clear if lysis time stochasticity would have any impact on phage fitness. All else being equal, genotypes with reduced variances in offspring number would, in the long run, have higher fitness than genotypes that have the same mean offspring number, but larger variances [62,63]. Overall, this suggests that natural selection would tend to minimize stochasticity in phenotypes that are closely linked to Darwinian fitness. If the phage burst size is positively linked with the lysis time, as has been shown previously [46], then selection for reduced burst size stochasticity should lead to reduced lysis time stochasticity as well. Presumably, this hypothesis can be tested by competing two isogenic phage strains that have the same MLTs but very different lysis time SDs. Interestingly, inspection of Table Table11 revealed that mutations introduced into WT λ holin sequence usually result in increased stochasticity, except in one case. It is not clear if this observation implies that the WT holin sequences have already been selected for reduced stochasticity in the wild as well. Experiments with more phage holins should provide some hints in this respect.

Conclusions

Even in a seemingly uniform environment, the lysis time can vary greatly among individual λ lysogenic cells (lysis time stochasticity). The extent of stochasticity, as quantified by the standard deviation, depends on the quality (due to isogenic λ lysogens expressing different S protein alleles) and quantity (manipulated by having different pR' activities and lysogen growth rates) of the holin protein, the major determinant of lysis timing in large-genome phages. There is a general positive trend between the mean lysis time and the degree of stochasticity. However, this positive relationship is much tighter when difference in mean lysis time is due to holin quantity rather than quality. The pattern of lysis time stochasticity obtained by addition of KCN at various time points after lysogen induction showed a negative relationship between the timing of KCN addition and the level of lysis time stochasticity.

Appendix A

This section provides the rationale for partitioning lysis time variance found in the study by Amir et al. [10].

For each UV-induced λ lysogenic cell, the lysis time T can be divided into three time intervals: (1) t1, the time interval between lysogen induction and the onset of pR promoter, (2) t2, the time interval between the onset of the pR promoter and the onset of the pR' promoter, and (3) t3, the time interval between the onset of the pR' promoter and the eventual lysis. The following relationships describe the above time intervals and the empirically determined time intervals by Amir et al. [10]: t1 = tpR, t1 + t2 = tpR'-tR', t1 + t2 + t3 = tlysis, and t3 = Δt = tlysis - tpR'-tR'.

For, T = t1 + t2 + t3, the variance for the lysis time can be expressed as VAR(T) = VAR(t1) + VAR(t2) + VAR(t3) + 2COV (t1, t2) + 2COV (t2, t3) + 2COV (t1, t3). While the authors did not provide all possible combinations of covariance, it is empirically determined that COV(t1 + t2, t3) = 0, as shown in their figure seven E (i.e., no correlation between tpR'-tR' and Δt). That is, COV(t1 + t2, t3) = COV(t1, t3) + COV(t2, t3) = 0. Although not empirically demonstrated, it seems unlikely that the timing of turning on either the pR or pR' promoter would have a positive or negative effect on the assembly of lysis apparatus such that their effects would cancel each other out, resulting in the observed COV(t1, t3) + COV(t2, t3) = 0. Most likely, time intervals are mutually independent, i.e., COV(t1, t3) = COV(t2, t3) = 0.

The standard deviations ("absolute noise" in their terminology) for tpR'-tR' and tlysis can be extracted from their figure six A using data determined from cells carrying the pR'-tR'-GFP plasmid. The estimated SDs for tpR'-tR' and tlysis are ~10 min and ~18 min, respectively; therefore, VAR(tpR'-tR') = ~100 and VAR(tlysis) = ~324. The SD for tpR can be estimated by extrapolating the line connecting between lysis and pR' onset to the 20 min mean time at the x-axis (based on the result from cells carrying the pR-GFP plasmid in their figure six A). The corresponding SD for tpR is ~7 min, thus VAR(tpR) = ~49. Taken together, VAR(t1) = 49, VAR(t2) = 51 (= VAR(t1 + t2) - VAR(t1) = 100 - 49 ), and VAR(t3) = 224 (= VAR(t1 + t2 + t3) - VAR(t1 + t2) = 324 - 100). That is, VAR(t1), VAR(t2), and VAR(t3) contributed to 15%, 16%, and 69% of total lysis time variance, respectively.

Appendix B

Studies of molecular stochasticity typically use the coefficient of variation (CV) as the measurement for the degree of stochasticity [15,25,48,49]. Since CV is a composite statistic (defined as standard deviation/mean), it is sometimes difficult to discern whether an increase in the observed stochasticity (as quantified by CV) is due to decrease in mean or increase in SD. In some cases, a different metric, such as phenotypic noise strength (defined as variance/mean) [17,20], or a slight variant of it (defined as variance/squared mean) [19], has been used as well. Many times, it is not clear why a particular metric is used, except in the instance where the phenotypic noise strength is used to test against an a priori expectation of a Poisson distribution, for which variance/mean = 1.

It is understandable why the CV, or a variant, is used in certain situations. For example, if the means are drastically different from each other or a comparison is made between measurements using different units [[56], pp. 57-59.]. In our study, however, the means were not very different and the same measuring unit (i.e., min) was used. Therefore, we presented our means and SDs separately and then jointly as CVs. Except in one instance where presenting stochasticity as SD or CV makes a difference (i.e., effect of genotype on SD or CV vs. MLT), all the other results showed that SD and CV followed the same trend. Since CV can be derived from SD and mean, no information is lost by presenting them separately. Furthermore, when the stochasticity (or noise distribution) is not apparent, it may be advisable to present results as means and SDs (and if necessary, higher moments like skewness and kurtosis) separately, so that the impact of various experimental treatments on the noise distribution can be fully appreciated.

Methods

Bacterial strains

All bacteria and phage strains used in this study are listed in Table Table3.3. The copy number of λ genome was checked by PCR following the method of Powell et al. [64].

Table 3
Bacterial strains used in this study.

Experimental instrumentation

E. coli cells lysogenic for λ phage were induced and observed to lyse in a temperature-controlled perfusion chamber. The experimental apparatus consisted of a 250 mL side-arm (on bottom) medium bottle clamped to an elevated support with tubing leading to an inline heater (SH-27B, Warner Instruments, New Haven, CT) that was controlled by a dual channel heater controller (TC-344B, Warner Instruments, New Haven, CT). The growth medium, flowing at a rate of ~1 mL/min (driven by gravity) and heated by the inline heater to the desired temperature, was introduced to a 358 μL perfusion chamber (RC-21B, Warner Instruments, New Haven, CT) mounted on a heating platform (PM2, Warner Instruments, New Haven, CT) that was controlled by the same dual channel heater controller to maintain the desired temperature. The internal temperature of the perfusion chamber was independently monitored by a thermistor. Waste flowed out of the perfusion chamber, pooled in a reservoir, and was siphoned into a 2 L bottle by a vacuum source. Both the perfusion chamber and the heating platform were placed on the stage of an inverted microscope (TS100, Nikon) for observation at 400× magnification. One of the microscope's ocular lenses was replaced with a 10X MiniVID™ microscope camera (LW Scientific, Norcross, GA) to record individual lysis events onto a laptop computer at the rate of 1 frame per second. All data were collected in unit of seconds, though the results were presented in minutes.

Sample preparation and lysis time determination

Lysogens were cultured overnight in LB or minimal salts media (see below) at 30°C on a rolling drum. Stationary phase cultures were diluted 100-fold in LB or minimal salts media, then grown to A550 ~ 0.2. 200 μL of exponentially growing cells were immobilized on a 22 mm square glass coverslip that has been pretreated with 0.01% tissue-culture tested poly-L-lysine (mol. wt. 150 K - 300 K, Sigma, St. Louis, MO) at room temperature for 30 min. After assembling the perfusion chamber, the device was immediately placed on the heating platform and infused with heated medium to maintain the chamber temperature at 30°C for 30 min to stabilize the cells. To induce lysis, the chamber temperature was raised to 42°C for 15 min, and then dropped to 37°C for the duration of the observation period (i.e., until ~95% of cells are lysed). Video recording was initiated at the time when the temperature was raised to 42°C. Under these conditions, it usually takes less than 5 min for the temperature to rise from 30°C to 42°C, a transition comparable to shifting culture flasks from a 30°C to 42°C waterbath shaker. Some experiments were performed by adding KCN to the growth medium in the sidearm feeder bottle to a final concentration of 20 mM.

Videos were subsequently analyzed using Windows Media Player™ playback. The times of individual lysis events were then noted visually and recorded manually. The lysis time was defined as the time from the initiation of the first temperature shift to when the image of the cell disappeared from view. In general, it takes about a few seconds (frames) for lysing cells to fully disappear from view (Figure (Figure1A1A).

Determination of lysogen growth rate

Lysogen growth rate was manipulated by using different growth medium formulations: (i) full-strength LB (10 g tryptone, 5 g yeast extract, 10 g NaCl per L dH2O), (ii) one-fifth-strength LB (2 g tryptone, 1 g yeast extract, 10 g NaCl per L dH2O), (iii) 20 mM glucose in Davis minimal salts (7 g K2HPO4, 2 g KH2PO4, 1 g (NH4)2SO4, 0.5 g sodium citrate•2H2O, and 0.2 g MgSO4•7H2O), and (iv) 40 mM glycerol in Davis minimal salts. We assessed the growth of the lysogen strain IN56 by culturing it overnight at 30°C in each growth media. The next day, 90 μL of the overnight culture was used to inoculate 25 mL growth medium and the culture was placed in a 30°C waterbath shaker at 220 rpm. Culture growth was followed with a sipper-equipped spectrophotometer at A550. The growth rate was calculated as the slope of the linear regression of natural-logarithm transformed A550 values over time.

Statistical analysis

In most cases, data collection for a given strain or treatment spanned several days. Therefore, even for the same lysogen strain or experimental treatment the means and/or variances may be significantly different among data collected from different dates. We conducted a preliminary exploration of our data set using the software package JMP version 7.0.2, as implemented in MacOS operating system. For each lysogen strain or experimental treatment, the means and standard deviations (SDs) were extracted from the data set according to the date the data were collected and were treated as replicates. Pairwise comparisons of the means (using the Tukey-Kramer HSD test) showed that, for more than half of the cases, at least one mean was significantly different from the others. Since we were mainly interested in the variation, we subsequently converted all values into their corresponding residuals (centered by their corresponding means). We also tested the homogeneity of variance from each date replicate, using O'Brien's test, Brown-Forsythe test, Levene's test, and Bartlett's test, all implemented in JMP. Not surprisingly, more than half of the cases showed that at least one replicate variance was significantly different from the others. Although we did not have an a priori expectation of lysis time distribution, we nonetheless tested to see if the lysis time in each replicate is normally distributed or not, using the Shapiro-Wilk W test. Again, in many cases, the replicates do not show a normal distribution. Despite variability in our data set, none of our conclusions were fundamentally changed. Therefore, for the presented results, the mean and standard deviation for each lysogen strain or experimental treatment were calculated based on the following criteria: (i) if the means and variances were the same among all blocks, then all the data would be pooled together to estimate the combined means and SDs, (ii) if the means were significantly different, but the variances were the same among all blocks, then the mean would be estimated by averaging the block means while the SDs would be estimated by pooled residuals, and (iii) if the means and variances were significantly different among all blocks, then the means and SDs would be estimated by averaging block means and SDs. For details of our data set, see additional file 1.

Competing interests

The authors declare that they have no competing interests.

Authors' contributions

JJD was responsible for conducting all the relevant experiments, data analyses, and the preparation of the manuscript. INW was responsible for the supervision, data analyses, and preparation of the manuscript. Both authors read and approved the final manuscript.

Supplementary Material

Additional file 1:

Sample sizes and standard deviations. More detailed data sets for both Table Table11 and Table Table22.

Acknowledgements

The authors are grateful for insightful comments from Tom Caraco, Andrew Rutenberg, Gillian Ryan, Samuel Sheppard and several anonymous reviewers. The authors would also like to thank Yongping Shao for the initial setup of the experimental apparatus and Kuangnan Xiong for technical assistance. This work was supported by grant GM072815 from the National Institutes of Health to INW. During manuscript preparation, JJD was supported by grants from the Professional Staff Congress of the City University of New York and the National Science Foundation (Division of Environmental Biology Award #0804039 and Division of Molecular and Cellular Biosciences Award #0918199).

References

  • Avery SV. Microbial cell individuality and the underlying sources of heterogeneity. Nat Rev Microbiol. 2006;4:577–587. doi: 10.1038/nrmicro1460. [PubMed] [Cross Ref]
  • Longo D, Hasty J. Dynamics of single-cell gene expression. Mol Syst Biol. 2006;2:64. [PMC free article] [PubMed]
  • Losick R, Desplan C. Stochasticity and cell fate. Science. 2008;320:65–68. doi: 10.1126/science.1147888. [PMC free article] [PubMed] [Cross Ref]
  • Rao CV, Wolf DM, Arkin AP. Control, exploitation and tolerance of intracellular noise. Nature. 2002;420:231–237. doi: 10.1038/nature01258. [PubMed] [Cross Ref]
  • Raser JM, O'Shea EK. Noise in gene expression: origins, consequences, and control. Science. 2005;309:2010–2013. doi: 10.1126/science.1105891. [PMC free article] [PubMed] [Cross Ref]
  • Davidson CJ, Surette MG. Individuality in bacteria. Annu Rev Genet. 2008;42:253–268. doi: 10.1146/annurev.genet.42.110807.091601. [PubMed] [Cross Ref]
  • Fraser D, Kaern M. A chance at survival: gene expression noise and phenotypic diversification strategies. Mol Microbiol. 2009;71:1333–1340. doi: 10.1111/j.1365-2958.2009.06605.x. [PubMed] [Cross Ref]
  • McAdams HH, Arkin A. It's a noisy business! Genetic regulation at the nanomolar scale. Trends Genet. 1999;15:65–69. doi: 10.1016/S0168-9525(98)01659-X. [PubMed] [Cross Ref]
  • Veening JW, Smits WK, Kuipers OP. Bistability, epigenetics, and bet-hedging in bacteria. Annu Rev Microbiol. 2008;62:193–210. doi: 10.1146/annurev.micro.62.081307.163002. [PubMed] [Cross Ref]
  • Amir A, Kobiler O, Rokney A, Oppenheim AB, Stavans J. Noise in timing and precision of gene activities in a genetic cascade. Mol Syst Biol. 2007;3:71. [PMC free article] [PubMed]
  • Arkin A, Ross J, McAdams HH. Stochastic kinetic analysis of developmental pathway bifurcation in phage λ-infected Escherichia coli cells. Genetics. 1998;149:1633–1648. [PMC free article] [PubMed]
  • Pearl S, Gabay C, Kishony R, Oppenheim A, Balaban NQ. Nongenetic individuality in the host-phage interaction. PLoS Biol. 2008;6:e120. doi: 10.1371/journal.pbio.0060120. [PMC free article] [PubMed] [Cross Ref]
  • St-Pierre F, Endy D. Determination of cell fate selection during phage lambda infection. Proc Natl Acad Sci USA. 2008;105:20705–20710. doi: 10.1073/pnas.0808831105. [PMC free article] [PubMed] [Cross Ref]
  • Cai L, Friedman N, Xie XS. Stochastic protein expression in individual cells at the single molecule level. Nature. 2006;440:358–362. doi: 10.1038/nature04599. [PubMed] [Cross Ref]
  • Elowitz MB, Levine AJ, Siggia ED, Swain PS. Stochastic gene expression in a single cell. Science. 2002;297:1183–1186. doi: 10.1126/science.1070919. [PubMed] [Cross Ref]
  • Ito Y, Toyota H, Kaneko K, Yomo T. How selection affects phenotypic fluctuation. Mol Syst Biol. 2009;5:264. [PMC free article] [PubMed]
  • Ozbudak EM, Thattai M, Kurtser I, Grossman AD, van Oudenaarden A. Regulation of noise in the expression of a single gene. Nat Genet. 2002;31:69–73. doi: 10.1038/ng869. [PubMed] [Cross Ref]
  • Maamar H, Raj A, Dubnau D. Noise in gene expression determines cell fate in Bacillus subtilis. Science. 2007;317:526–529. doi: 10.1126/science.1140818. [PMC free article] [PubMed] [Cross Ref]
  • Bar-Even A, Paulsson J, Maheshri N, Carmi M, O'Shea E, Pilpel Y, Barkai N. Noise in protein expression scales with natural protein abundance. Nat Genet. 2006;38:636–643. doi: 10.1038/ng1807. [PubMed] [Cross Ref]
  • Blake WJ, M KA, Cantor CR, Collins JJ. Noise in eukaryotic gene expression. Nature. 2003;422:633–637. doi: 10.1038/nature01546. [PubMed] [Cross Ref]
  • Fraser HB, Hirsh AE, Giaever G, Kumm J, Eisen MB. Noise minimization in eukaryotic gene expression. PLoS Biol. 2004;2:e137. doi: 10.1371/journal.pbio.0020137. [PMC free article] [PubMed] [Cross Ref]
  • Acar M, Mettetal JT, van Oudenaarden A. Stochastic switching as a survival strategy in fluctuating environments. Nat Genet. 2008;40:471–475. doi: 10.1038/ng.110. [PubMed] [Cross Ref]
  • Ansel J, Bottin H, Rodriguez-Beltran C, Damon C, Nagarajan M, Fehrmann S, Francois J, Yvert G. Cell-to-cell stochastic variation in gene expression is a complex genetic trait. PLoS Genet. 2008;4:e1000049. doi: 10.1371/journal.pgen.1000049. [PMC free article] [PubMed] [Cross Ref]
  • Blake WJ, Balazsi G, Kohanski MA, Isaacs FJ, Murphy KF, Kuang Y, Cantor CR, Walt DR, Collins JJ. Phenotypic consequences of promoter-mediated transcriptional noise. Mol Cell. 2006;24:853–865. doi: 10.1016/j.molcel.2006.11.003. [PubMed] [Cross Ref]
  • Bishop AL, Rab FA, Sumner ER, Avery SV. Phenotypic heterogeneity can enhance rare-cell survival in 'stress-sensitive' yeast populations. Mol Microbiol. 2007;63:507–520. [PubMed]
  • Wang IN, Smith DL, Young R. HOLINS: The Protein Clocks of Bacteriophage Infections. Annu Rev Microbiol. 2000;54:799–825. doi: 10.1146/annurev.micro.54.1.799. [PubMed] [Cross Ref]
  • Young R, Wang IN, Roof WD. Phages will out: strategies of host cell lysis. Trends Microbiol. 2000;8:120–128. doi: 10.1016/S0966-842X(00)01705-4. [PubMed] [Cross Ref]
  • Wang IN, Deaton J, Young R. Sizing the holin lesion with an endolysin-β-galactosidase fusion. J Bacteriol. 2003;185:779–787. doi: 10.1128/JB.185.3.779-787.2003. [PMC free article] [PubMed] [Cross Ref]
  • Savva CG, Dewey JS, Deaton J, White RL, Struck DK, Holzenburg A, Young R. The holin of bacteriophage lambda forms rings with large diameter. Mol Microbiol. 2008;69:784–793. doi: 10.1111/j.1365-2958.2008.06298.x. [PubMed] [Cross Ref]
  • Park T, Struck DK, Dankenbring CA, Young R. The pinholin of lambdoid phage 21: control of lysis by membrane depolarization. J Bacteriol. 2007;189:9135–9139. doi: 10.1128/JB.00847-07. [PMC free article] [PubMed] [Cross Ref]
  • Xu M, Arulandu A, Struck DK, Swanson S, Sacchettini JC, Young R. Disulfide isomerization after membrane release of its SAR domain activates P1 lysozyme. Science. 2005;307:113–117. doi: 10.1126/science.1105143. [PubMed] [Cross Ref]
  • Xu M, Struck DK, Deaton J, Wang IN, Young R. A signal-arrest-release sequence mediates export and control of the phage P1 endolysin. Proc Natl Acad Sci USA. 2004;101:6415–6420. doi: 10.1073/pnas.0400957101. [PMC free article] [PubMed] [Cross Ref]
  • Zhang N, Young R. Complementation and characterization of the nested Rz and Rz1 reading frames in the genome of bacteriophage lambda. Mol Gen Genet. 1999;262:659–667. doi: 10.1007/s004380051128. [PubMed] [Cross Ref]
  • Berry J, Summer EJ, Struck DK, Young R. The final step in the phage infection cycle: the Rz and Rz1 lysis proteins link the inner and outer membranes. Mol Microbiol. 2008;70:341–351. doi: 10.1111/j.1365-2958.2008.06408.x. [PubMed] [Cross Ref]
  • Young R, Way J, Way S, Yin J, Syvanen M. Transposition mutagenesis of bacteriophage lambda: a new gene affecting cell lysis. J Mol Biol. 1979;132:307–322. doi: 10.1016/0022-2836(79)90262-6. [PubMed] [Cross Ref]
  • Friedman DI, Gottesman M. In: Lambda II. Hendrix RW,Roberts JW,Stahl FW,Weisberg RA, editor. Cold Spring Harbor, New York: Cold Spring Harbor Laboratory; 1983. Lytic mode of lambda development; pp. 21–51.
  • Gründling A, Bläsi U, Young R. Genetic and biochemical analysis of dimer and oligomer interactions of the lambda S holin. J Bacteriol. 2000;182:6082–6090. doi: 10.1128/JB.182.21.6082-6090.2000. [PMC free article] [PubMed] [Cross Ref]
  • Dewey JS, Savva CG, White RL, Vitha S, Holzenburg A, Young R. Micron-scale holes terminate the phage infection cycle. Proc Natl Acad Sci USA. 2010;107:2219–2223. doi: 10.1073/pnas.0914030107. [PMC free article] [PubMed] [Cross Ref]
  • Ryan GL, Rutenberg AD. Clocking out: modeling phage-induced lysis of Escherichia coli. J Bacteriol. 2007;189:4749–4755. doi: 10.1128/JB.00392-07. [PMC free article] [PubMed] [Cross Ref]
  • White R, Chiba S, Pang T, Dewey JS, Savva CG, Holzenburg A, Pogliano K, Young R. Holin triggering in real time. Proc Natl Acad Sci USA. 2010;108:798–803. [PMC free article] [PubMed]
  • Ellis EL, Delbrück M. The growth of bacteriophage. J Gen Physiol. 1939;22:365–384. doi: 10.1085/jgp.22.3.365. [PMC free article] [PubMed] [Cross Ref]
  • Delbrück M. The growth of bacteriophage and lysis of the host. J Gen Physiol. 1940;23:643–660. doi: 10.1085/jgp.23.5.643. [PMC free article] [PubMed] [Cross Ref]
  • Doermann AH. The intracellular growth of bacteriophages. I. Liberation of intracellular bacteriophage T4 by premature lysis with another phage or with cyanide. J Gen Physiol. 1952;35:645–656. doi: 10.1085/jgp.35.4.645. [PMC free article] [PubMed] [Cross Ref]
  • Young R. Bacteriophage lysis: mechanism and regulation. Microbiol Rev. 1992;56:430–481. [PMC free article] [PubMed]
  • Gründling A, Manson MD, Young R. Holins kill without warning. Proc Natl Acad Sci USA. 2001;98:9348–9352. doi: 10.1073/pnas.151247598. [PMC free article] [PubMed] [Cross Ref]
  • Wang IN. Lysis timing and bacteriophage fitness. Genetics. 2006;172:17–26. [PMC free article] [PubMed]
  • Raab R, Neal G, Garrett J, Grimaila R, Fusselman R, Young R. Mutational analysis of bacteriophage lambda lysis gene S. J Bacteriol. 1986;167:1035–1042. [PMC free article] [PubMed]
  • Swain PS, Elowitz MB, Siggia ED. Intrinsic and extrinsic contributions to stochasticity in gene expression. Proc Natl Acad Sci USA. 2002;99:12795–12800. doi: 10.1073/pnas.162041399. [PMC free article] [PubMed] [Cross Ref]
  • Raj A, Peskin CS, Tranchina D, Vargas DY, Tyagi S. Stochastic mRNA synthesis in mammalian cells. PLoS Biol. 2006;4:1707–1719. [PMC free article] [PubMed]
  • Shao Y, Wang IN. Effect of late promoter activity on bacteriophage λ fitness. Genetics. 2009;181:1467–1475. doi: 10.1534/genetics.108.098624. [PMC free article] [PubMed] [Cross Ref]
  • Gillespie DT. Exact stochastic simulation of coupled chemical reactions. J Phys Chem. 1977;81:2340–2361. doi: 10.1021/j100540a008. [Cross Ref]
  • McAdams HH, Arkin A. Stochastic mechanisms in gene expression. Proc Natl Acad Sci USA. 1997;94:814–819. doi: 10.1073/pnas.94.3.814. [PMC free article] [PubMed] [Cross Ref]
  • Bremer H, Dennis PP. In: Escherichia coli and Salmonella typhimurium Cellular and Molecular Biology. Ingraham JL,Low KB,Magasanik B,Schaechter M,Umbarger HE, editor. Vol. 2. Washington, D.C.: American Society for Microbiology; 1987. Modulation of chemical composition and other parameters of the cell by growth rate; pp. 1527–1542.
  • Hadas H, Einav M, Fishov I, Zaritsky A. Bacteriophage T4 development depends on the physiology of its host Escherichia coli. Microbiology. 1997;143:179–185. doi: 10.1099/00221287-143-1-179. [PubMed] [Cross Ref]
  • Bertani G. Lysogeny at mid-twentieth century: P1, P2, and other experimental systems. J Bacteriol. 2004;186:595–600. doi: 10.1128/JB.186.3.595-600.2004. [PMC free article] [PubMed] [Cross Ref]
  • Sokal RR, Rohlf FJ. Biometry. 3. New York, New York: W. H. Freeman and Company; 1995.
  • Abedon ST. Selection for bacteriophage latent period length by bacterial density: A theoretical examination. Microb Ecol. 1989;18:79–88. doi: 10.1007/BF02030117. [PubMed] [Cross Ref]
  • Abedon ST, Herschler TD, Stopar D. Bacteriophage latent-period evolution as a response to resource availability. Appl Environ Microbiol. 2001;67:4233–4241. doi: 10.1128/AEM.67.9.4233-4241.2001. [PMC free article] [PubMed] [Cross Ref]
  • Heineman RH, Bull JJ. Testing optimality with experimental evolution: lysis time in a bacteriophage. Evolution. 2007;61:1695–1709. doi: 10.1111/j.1558-5646.2007.00132.x. [PMC free article] [PubMed] [Cross Ref]
  • Shao Y, Wang IN. Bacteriophage adsorption rate and optimal lysis time. Genetics. 2008;180:471–482. doi: 10.1534/genetics.108.090100. [PMC free article] [PubMed] [Cross Ref]
  • Wang IN, Dykhuizen DE, Slobodkin LB. The evolution of phage lysis timing. Evol Ecol. 1996;10:545–558. doi: 10.1007/BF01237884. [Cross Ref]
  • Gillespie JH. Nautural selection for within-generation variance in offspring number. Genetics. 1974;76:601–606. [PMC free article] [PubMed]
  • Gillespie JH. Natural selection for variances in offspring numbers: a new evolutionary principle. Am Nat. 1977;111:1010–1014. doi: 10.1086/283230. [Cross Ref]
  • Powell BS, Rivas MP, Court DL, Nakamura Y, Turnbough CL Jr. Rapid confirmation of single copy lambda prophage integration by PCR. Nucleic Acids Res. 1994;22:5765–5766. doi: 10.1093/nar/22.25.5765. [PMC free article] [PubMed] [Cross Ref]

Articles from BMC Microbiology are provided here courtesy of BioMed Central
PubReader format: click here to try

Formats:

Related citations in PubMed

See reviews...See all...

Cited by other articles in PMC

See all...

Links

Recent Activity

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

See more...