Logo of plosonePLoS OneView this ArticleSubmit to PLoSGet E-mail AlertsContact UsPublic Library of Science (PLoS)
PLoS One. 2011; 6(8): e23798.
Published online Aug 26, 2011. doi:  10.1371/journal.pone.0023798
PMCID: PMC3162599

Collective Dynamics of Active Cytoskeletal Networks

Daniel J. Muller, Editor

Abstract

Self organization mechanisms are essential for the cytoskeleton to adapt to the requirements of living cells. They rely on the intricate interplay of cytoskeletal filaments, crosslinking proteins and molecular motors. Here we present an in vitro minimal model system consisting of actin filaments, fascin and myosin-II filaments exhibiting pulsatile collective dynamics and superdiffusive transport properties. Both phenomena rely on the complex competition of crosslinking molecules and motor filaments in the network. They are only observed if the relative strength of the binding of myosin-II filaments to the actin network allows exerting high enough forces to unbind actin/fascin crosslinks. This is shown by varying the binding strength of the acto-myosin bond and by combining the experiments with phenomenological simulations based on simple interaction rules.

Introduction

The cytoskeleton of eukaryotic cells is a highly flexible and adaptable scaffold that undergoes constant remodeling to meet their changing needs. With its unique static and dynamic properties it facilitates tasks as complex and diverse as cell division, cell locomotion or phagocytosis. Intracellular patterns can emerge, as has been observed in the apical constriction during Drosophila gastrulation, where the tissue rearrangement is driven by pulsed contractions of the actin myosin cytoskeleton [1], [2]. Similar self organization mechanisms are of outmost importance in many aspects of cellular development [3]. All these processes rely on the intricate interplay between three major components: actin filaments, molecular motors and crosslinking proteins. While a polymer network consisting of filaments and crosslinkers result in a viscoelastic physical gel, molecular motors exert local forces and turn it into an active gel [4]. The dynamics in these active actomyosin gels can be coordinated in time and space as has been observed for the pulsed constrictions during dorsal closure giving rise to a collective behavior in vivo [5].

A processive force exertion of the molecular motors inside a purely viscous environment would lead to ballistic motion of the cytoskeletal material, only limited by the viscous friction of the environment. Inside of a homogenous viscoelastic medium additional relaxation processes occur, which would mainly result in a slowdown of the dynamics.

Yet, the cytoskeleton is far from being homogeneous. Here, the coordinated action of molecular motors and crosslinking proteins leads to the formation and stabilization of a wide variety of structures that in turn affect the large scale dynamics of the system. It is the feedback between structure formation and dynamic properties that sets the functional properties of cytoskeletal systems and active gels in general. However, due to the lack of adequate model systems, it remains difficult to address these feedback mechanisms.

Force dissipation in the viscoelastic environment and the inherent heterogeneity should modulate the dynamics in a nontrivial way: The transport by molecular motors relies on the interaction with discrete and anisotropic filaments, which could suggest the occurrence of anomalous diffusion processes. At the same time, the force exertion inside of crosslinked cytoskeletal networks are expected to induce a force rate dependent rupturing of the crosslinking points [6] and thus the locally induced changes of the elastic environment will also affect and modulate the transport and structure formation dynamics. Thereby, it would be conceivable that the connectivity of the filamentous network enables the coordination of the transport and reorganization processes resulting in the appearance of collective modes.

To shed light on the principles underlying the physics of such active gels, to examine their microscopic dynamics and to classify the thereby resulting dynamic structures, we study a reconstituted actin network that is actively set under stress by molecular motors [7]. While crosslinking proteins are required for the mechanical stability of the actin network, molecular motors introduce an active component to the networks [8], [9], [10], [11]. The presence of only motor filaments and ATP does not suffice to induce any reorganization or structure formation in an actin solution. Only the combination of motors and crosslinking molecules can result in structure formation [12] and even can induce a macroscopic contraction of cytoskeletal in vitro networks [13], [14], [15].

Here we show that in an active and crosslinked network pulsatile collective modes and superdiffusive transport phenomena evolve, that depend critically on the interaction strength of the myosin-II motor filaments. Our recently introduced minimal approach [7] using a reconstituted actin/fascin network in presence of myosin-II filaments enables a backtracking of the pulsatile collective dynamic properties to the structure formation: The connectivity of the network is the basis for the coordinated reorganization of the cytoskeletal structure in the steady state. The dynamics are dominated by the complex competition of crosslinking molecules and motor filaments in the network. The key player is the relative strength of the binding of myosin-II filaments to the actin network: only a high binding affinity allows exerting high enough forces to unbind actin/fascin crosslinks resulting in network activity. The resulting dynamics can be described by an anomalous diffusion of the network's constituents.

Results

Active gels composed of 1 M actin filaments, 1 M fascin crosslinker and 0.1 M skeletal muscle myosin-II filaments in presence of ATP undergo drastic structural rearrangements. The dynamics within the network is characterized by a succession of persistent runs and stalling events of individual actin/fascin/myosin-II structures (fig. 1A–F and Movie S1). In general, the individual structures move independently. Yet, for short time intervals of about 30 s they can also syncronize their movements. These pulsatile collective modes are characterized by a coordinated movement in time and space of a few or even up to nearly all visible structures of the network (fig. 1G). Structures which are up to hundreds of microns apart are synchronized in their movement: during run phases their directional motion is coordinated (fig. 1C) and the active movement starts and stops almost simultaneously. This coordinated movement is not altering the steady state of the system and is not linked to a macroscopic contraction, which only occurs at much higher actin concentrations [7]. The long range coordination of the dynamic reorganization suggests the existence of a connectivity in the dynamic actin network. This connectivity is a prerequisite for the molecular motors to transport and exert forces between filaments. Thus, it is the connectivity and discrete nature of the network together with the force exertion mechanism, which enables the collective motion to occur. Introducing the velocity cross-correlation function An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e001.jpg collective movements can directly be quantified. For each time point the average of the squared correlation function An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e002.jpg reflects the level of correlation in the system. High values of An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e003.jpg relate to a highly collective movement, while low values close to zero indicate intervals lacking collective modes (fig. 1G and fig. S1). At 0.1 mM ATP, for a correlation cutoff An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e004.jpg about 9% of the frames show correlated movement (see material and methods and movie S1).

Figure 1
Structure and dynamics of actin/fascin/myosin networks.

Microscopically, stall phases can be ascribed to the presence of the crosslinking molecules while the runs are the direct consequence of the activity of the myosin-II filaments. Accordingly, the dynamics and their collective modes should be set by the motor activity. Consequently, lowering the motor activity by decreasing the ATP concentration and thus lowering the motor velocity should lead to a continuous decrease of the network dynamics. Yet, the variation of the ATP concentration results in a more complex behavior, as the competition of the motors with the crosslinking molecules comes into play. We observe four distinct regimes (fig. 2): (i) in the absence of ATP a passive actin/fascin/myosin network consisting of small, diffusing clusters is observed (fig. 2A and Movie S2). Their movement is not correlated (fig. 2E). The passive actin/fascin/myosin network structure is distinct from an actin/fascin bundle network. This can be explained by a competitive binding of fascin and myosin-II to the actin filaments. Moreover, myosin-II filaments seem to act as nucleation seeds of the actin polymerization. (ii) At low ATP concentrations (10 M, fig. 2B) the low motor activity is limiting the number of runs and the stalls of the network structures are dominating the low dynamics. Consequently, collective modes barely occur in this crosslinker dominated regime. (iii) In the intermediate regime (up to 0.1 mM, fig. 2C) the highest correlation is observed. (iv) At high ATP concentrations (fig. 2D and Movie S3) correlated motion is again rarely observed. Moreover, at high ATP concentrations the networks become disrupted and huge clusters emerge. The maximal area of these clusters typically exceeds the area of a compact disc with radius of 80 m whereas structures at lower ATP concentrations remain significantly smaller.

Figure 2
Dependence of the dynamics on the ATP concentration.

The existence of an optimal ATP-concentration for the emergence of collective modes can be explained by the acto-myosin binding strength: Increasing the ATP concentration not only results in an increase in myosin-II sliding velocity but also decreases the maximal force myosin-II filaments can exert [16], [17]. The lower affinity of ATP-myosin to actin filaments limits the overall processivity of the myosin-II filaments. Thus the forces myosin-II filaments can exert are lower at high ATP concentrations than at intermediate concentrations of ATP. As a consequence, forced unbinding is less likely at higher ATP concentrations. Accordingly, large aggregates with many crosslinkers bound cannot be disrupted while small structures with only a few crosslinking points are still ruptured and rearranged. As a consequence, material is transported from small to large and highly crosslinked structures. This is reflected in the observed cluster formation. As the material is accumulated in these clusters the connectivity between them decreases resulting in the observed low correlation. At very low ATP concentrations the maximal force exertion of myosin-II decreases again [16] consistent with the observed decrease in dynamics.

The dynamics of the individual structures in the network is best described by the mean square displacement [7], which is computed for about 1500 individual points per sample. For Brownian diffusion, the mean square displacement, An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e006.jpg, is expected to increase with time An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e007.jpg with a power law exponent An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e008.jpg while An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e009.jpg or An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e010.jpg are indicative of sub- or superdiffusion, respectively [18], [19]. In presence of ATP, a clear superdiffusive behavior of individual clusters is found: the mean square displacements increase in time with An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e011.jpg (fig. 3A). This can be traced back to the complex alternation of runs and stalls of the individual network structures. Due to similar durations of run and stall times, the m.s.d. is described by a single power law (fig. 3A). The distribution of the powerlaw exponents depends on the ATP concentration (fig. 3B): The passive state (i) is characterized by a subdiffusive behavior which can be attributed to the network hindering the diffusion. Already at low ATP concentrations (ii), the dynamics become superdiffusive. This superdiffusivity is even more pronounced at intermediate ATP concentrations (iii). However, at high ATP concentrations (iv) again a lower superdiffusivity is observed. Importantly, the width of the distribution increases at high ATP concentrations. This can be attributed to an increase of heterogeneity in the sample. These heterogeneities predominantly occur in this high ATP concentration regime. Similarly to the elimination of pulsatile collective modes, the lower superdiffusivity can be attributed to longer stalls (fig. S2) due to a decrease in forced unbinding events resulting in less activity and a larger variability.

Figure 3
Superdiffusivity in active actin networks.

The maximal velocity of individual structures in run phases of 0.6 m/s is observed for intermediate ATP concentrations while higher or lower ATP concentrations result in a decrease of the velocity in accordance with the results obtained for the pulsatile collective modes or superdiffusivity. In all regimes the velocities in run phases are an order of magnitude lower than the velocity of myosin-II filaments observed in gliding assays at similar ATP concentrations [20]. Thus, in all cases the speeds are not limited by the maximal speed of the motors, but by the presence of crosslinking bonds.

Alternatively to the variation of ATP concentration, the crossbridge strength of the myosin-II filaments can be altered independently by the ionic strength [21]. An increase of the KCl concentration up to 200 mM does not affect the myosin-II filament length [22]. We also do not observe any differences in actin/fascin network structure upon variation of the ionic strength. Yet, exceeding a critical KCl concentration of 60 mM prevents any dynamic reorganization within the active gel (fig. 4): the structure of an active actin/fascin/myosin network at more than 60 mM KCl cannot be distinguished from a passive actin/fascin network. This critical concentration has also been observed in a gliding assay, where salt concentrations higher than 60 mM do not support motility of actin filaments [23]. At this ionic strength the affinity of ATP-myosin does not allow for permanent binding of the myosin-II to the actin filaments throughout its chemomechanical cycle. Similarily, decreasing the myosin concentration to 20 nM results in a quasi-static active gel [7] demonstrating the necessity of sufficiently high motor activity to induce a highly dynamic state in the active actin network.

Figure 4
Dependence of the dynamics on the KCl concentration.

Thus, the observed network reorganization, the emergence of collective modes and the superdiffusive behavior critically depend on the strength of the myosin-actin bond: Only a maximal binding strength of the myosin-II filaments to actin at low ionic strength allows exerting high enough forces to disrupt the actin/fascin crosslinking points and to reorganize the network structure. The network reorganization and the observed superdiffusivity not only rely on the competition between active and passive crosslinks but also on the respective binding strengths and affinities.

The good accessibility of all relevant system parameters within this reconstituted approach enables us to test the identified principles in a simple phenomenological simulation that is based on probabilistic interaction rules. Fascin bundles are modelled as polar rigid rods in a quasi two dimensional geometry they are monodisperse and are not subjected to rupturing events. The latter simplification is in accordance with experimental findings where single bundles are the smallest building blocks of cluster formation [7]. The bundles are propelled and crosslinked reflecting transport and passive binding processes. Both active and passive binding processes are subjected to forced unbinding events.

The implementation of these basic processes already suffices to obtain a network dynamics strongly reminiscent to the experimental findings. Due to the concerted action of molecular motors, clusters are constantly transported and the trajectories they perform are characterized by a succession of runs and stalls (fig. 5A). During run phases the velocity of the fastest clusters does not exceed one tenth of the velocity of the motor proteins; and the larger the clusters are, the lower is their susceptibility to motor induced displacements and the less they move (fig. 5B). During stall phases clusters essentially exhibit a diffusive motion. In accordance with the experiment, runs and stalls average to a superdiffusive behavior, as can be seen in the distribution of exponents of the mean square displacement in fig. 5C. While this is in accordance with time dependent ensemble averages [7], the occurence of broad distributions directly relates to the intrinsic degree of heterogeneity in the system. Like in the experiment, the dynamics of individual clusters relies on local influencing factors like the local network connectivity, the local concentration of active crosslinks and the individual cluster size.

Figure 5
Simulation results.

The exact values of An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e021.jpg depend on the details of the actin-fascin and actin-myosin interaction. In the simulation, this is governed by the motor and crosslinker on- and off-rates. An increase in the motor off-rate An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e022.jpg lowers the crossbridge strength and corresponds to the addition of KCl in the experiment. Similar to the experiment the increase of the motor off-rate hinders the reorganization in the system and individual structures, single rods or entire clusters move less. This is reflected in a reduced exponent of the mean square displacement, which successively decreases with increasing motor off-rate (fig. 5D). If the motor activity drops below a critical value, the dynamics becomes subdiffusive. In this regime the motor proteins are not strong enough to induce any significant network reorganization and the system essentially consists of one single cluster that only shows diffusive motion. A similar behavior is found if the on-rate of the crosslinking proteins An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e023.jpg is increased. The higher the on-rate, the more the cluster dynamics is shifted to stall phases and the exponent An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e024.jpg decreases concomitantly (fig. 5D).

Importantly, the simulation cannot retrieve the pulsatile collective run and stall phases observed in the experiment, where remote structures move in a coordinated manner (fig. 1). This indicates that the experimentally observed dynamics not only depend on the identified microscopic interactions but are modulated by a weak but far reaching connectivity within the system. While the incorporation of active transport, crosslinking and forced unbinding suffices to explain the superdiffusive transport properties, the simulation cannot account for long range force percolation as the force balance is only local with a typical range of a rodlength. This consistent with the experimental findings, as a lack of connectivity observed for high ATP concentrations leads to a decline in the proportion of collective modes (fig. 2E). Variuos generalizations of the model system are conceivable. One possibility would be to add a background network, modelling the weak but far reaching connectivity in the system that governs the emergence of collective modes. Another limitation of the simulation, is the monodispersity of the bundles in the simulation.

Discussion

A minimal model system consisting of actin filaments, crosslinking molecules and myosin-II motor filaments exhibits drastic structural rearrangements that in turn affect the dynamic properties of the system. This feedback between large scale structure formation and dynamics is set by the microscopic details of the competition between myosin-II filaments and crosslinking molecules. The properties of the system are sensitively controlled by the binding affinity of the myosin-II filaments to actin-fascin structures that directly regulates the maximal force the myosin-II filaments can exert. If the exerted forces are sufficiently high to disrupt actin/fascin structures, the system is dominated by the motor activity. In this regime, a highly dynamic network is formed. The dynamics in this state show pulsatile collective modes which can be attributed to the connectivity of the polydisperse structures. The pulsatile collective modes are not only found for directly connected structures but they are propagated throughout the network. They do not lead to a macroscopic contraction but persist in a dynamic steady state.

The balance of motor to crosslinker strength alone not only sets the degree of dynamics in the network but also their coordination and range. An optimal balance of motor activity and binding strength is necessary to maintain the connectivity in the network which ensures not only the occurence of pulsatile collective modes but also a highly superdiffusive dynamics. Lowering the binding affinity of the motor heads limits the internal force exertion to the crosslinked actin filaments. Consequently, the crosslinking molecules dominate relative to the motor strength resulting in a non-collective dynamics with lower superdiffusivity and a crossover to normal diffusion in a highly heterogeneous network. This opens up the possibility of inducing large scale reorganizations within an active gel, building local contractile elements or establishing the systems' heterogeneity by solely changing the maximal force the motor proteins can exert.

Any large scale reorganization within active gels depends on the intricate interplay between structure formation, aggregation and dynamic transport, which are regulated and determined by the here studied competition between force generating and force bearing structures. For large scale reorganization of the intracellular cytoskeleton active transport of the cytoskeletal building blocks, their aggregation to higher order structure are essential for ensuing force generating capabilities. The dynamics of these processes will depend on the here studied interaction and competition between the force generating and force bearing structures. The combination of simplified in vitro model systems with simulations based on simple interaction rules opens up the perspective of addressing the governing principles of the cytoskeletal structure formation processes.

Materials and Methods

Protein purification

Myosin [24] and G-actin [25], [26] are extracted from rabbit skeletal muscle (rabbit meat was obtained from Hasenhof Weh, Moorenweis, Germany). To fluorescently label actin, actin is dialyzed against 50 mM boric acid (pH 8.0), 0.2 mM CaCl2, 0.2 mM ATP and polymerized by addition of 2 mM MgCl2 and 100 mM KCl. F-actin is incubated with Alexa Fluor 555 succinimidylester (Invitrogen) at a molar ratio of 1[ratio]1 at room temperature for 1 h and centrifuged at 100 000 g at 4°C for 2 h. Labelled F-actin is depolymerized by dialysis against G-buffer (2 mM Tris/HCl (pH 8.0), 0.2 mM CaCl2, 0.2 mM ATP, 0.2 mM DTT) at 4°C. This yields a 25% degree of labelling. Recombinant human fascin is purified from E.coli BL21-CodonPlus-RP and stored at −80°C in 2 mM Tris/HCl (pH 7.4), 150 mM KCl at 64 M [27].

Fluorescence imaging

Actin is polymerized at 1 M by adding one-tenth of the sample volume of a 10-fold concentrated polymerization buffer (100 mM imidazole, 2 mM CaCl2, 30 mM MgCl2), 0.1 M myosin-II, and 1 M fascin, 20 mM creatine phosphate and 0.1 mg/mL creatine phospho kinase (Sigma) for ATP regeneration, 3 mg/mL casein to prevent any surface interactions, ATP and KCl at indicated concentrations. In this polymerization buffer, myosin-II readily polymerizes into filaments with a mean length of 0.7 m independent of the KCl concentration as determined by transmission electron microscopy. Samples are enclosed to hermetically sealed chambers to eliminate any drift in the network [7].

All data are acquired on a Zeiss Axiovert 200 inverted microscope with either a 10× (NA 0.2) long distance objective or a 40× (NA 1.3) oil immersion objective. Images are captured at 0.84 frames/s with a charge-coupled device camera (Orca ER, Hamamatsu) attached to the microscope via a 0.4× camera mount.

Image processing

For tracing individual actin structures, images are background subtracted in ImageJ. To identify individual actin structures of the network, an intensity threshold value is applied in ImageJ to generate a binary image. Individual structures are identified as more than 10 connected bright pixels. The structures are traced over time using the IDL tracking algorithm by John C. Crocker [29] for the intensity weighted centroid positions using Matlab R2008b (The MathWorks, Inc.). To minimize tracking artefacts, the trajectories are subjected to a gliding average over 4 frames. Individual structures are traced for up to 6 min in the highly dynamic state or over 2.5 h in the passive state until they fuse with a different structures are disintegrated or move out of focus. The trajectories are divided into “runs” and “stalls”: Runs are identified as movements between two frames with velocities larger than 0.36 m/s and a change in direction smaller than 45° and the lengths of continuous runs over 2 successive frames are calculated. Run velocities are calculated as mean velocity of a single run and mean values are obtained by fitting Lorenz distributions. Mean square displacements are calculated for entire trajectories individually and the first 10% of the resulting mean square displacements are used. The power exponent An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e025.jpg is fitted logarithmically to mean square displacements longer than 5 time points. Average values of An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e026.jpg are obtained by fitting a Gaussian to the distribution of the power exponent to account for the heterogeneity of the networks. Please note, that these average values are similar but not equal to average values obtained by ensemble averaging the m.s.d.s prior to fitting as applied in [7].

To determine phases of correlated movement, the velocity cross-correlation function of moving structures An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e027.jpg is evaluated. The degree of correlation is proportional to the average of the squared correlation function An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e028.jpg (fig. S1). The proportion of time points showing collective modes is evaluated by introducing a correlation cutoff An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e029.jpg: Averaged squared correlation functions An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e030.jpg above An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e031.jpg are defined as collective modes; values below An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e032.jpg are defined to relate to an uncorrelated movement. For the data displayed in fig. 1 An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e033.jpg was set to 0.15. The variation of An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e034.jpg only affects the absoulte values while the relative values and the trend are not affected.

Simulations The experimental system consists of interconnected polar fascin bundles that are actively transported and set under stress by myosin-II filaments [7]. The microscopic processes that lead to the observed self organization, arise through the interplay of crosslinking events and active transport. More specifically, the competition between molecular motors and crosslinking proteins gives rise to the active movement, (re-)binding and forced unbinding. These microscopic interactions are the basis for numerical simulations. In a minimal approach fascin bundles are modelled as monodisperse and polar rigid rods in a quasi-two dimensional geometry. If two filaments overlap active or passive binding events occur based on probabilistic interaction rules governed by the motor and crosslinker on rates An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e035.jpg and An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e036.jpg. In a similar manner unbinding processes are calculated with the motor and crosslinker off-rates An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e037.jpg and An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e038.jpg. If two actin fascin bundles are actively crosslinked, torques and forces are exerted by the bipolar motor filament moving towards the plus ends of the bundles. The velocities that arise from these active crosslinks can be calculated based on a microscopic force balance of two interacting rods. This yields An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e039.jpg for the relative translational velocity and An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e040.jpg for the relative angular velocity of two actively coupled rods. The constants An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e041.jpg and An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e042.jpg are given by the quotient of motor stiffness and the viscosities for translational and rotational movement of a rod in solution respectively, An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e043.jpg is the motor velocity and An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e044.jpg is the timestep. The vectors An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e045.jpg are center of mass coordinates of the polar rods and An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e046.jpg denote their orientations. The details of the derivation can be found in the supplemental online material to Ref. [7]. These expressions obey the generic symmetry-relations for motor-mediated two-filament interactions derived in Ref. [28]. Both active and passive binding events are subjected to forced unbinding. In a simplified picture this is modelled by increasing the off-rate with the number of motor proteins An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e047.jpg per individual cluster according to An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e048.jpg, where An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e049.jpg is the maximum off-rate and An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e050.jpg determining the rate of change of An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e051.jpg. All lengths are measured in units of the rod length An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e052.jpg. With a rod length corresponding to An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e053.jpg m and a motor velocity of An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e054.jpg m/s, the unit of the simulation time is 1 s. If not indicated otherwise, all simulations were performed with a density An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e055.jpg, a motor on-rate An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e056.jpg, a motor off-rate An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e057.jpg, a crosslinker on-rate An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e058.jpg and a crosslinker off-rate An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e059.jpg. The timestep was adjusted to An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e060.jpg and the constants were set to An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e061.jpg and to An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e062.jpg respectively.

Supporting Information

Figure S1

Identification and quantification of correlated modes. First, the velocity field for the identified structures is calculated for each time point (A). Second the velocity cross-correlation function is evaluated for each frame. Averages of the cross-correlation function over 3 successive frames are shown in B. Correlation functions close to An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e063.jpg indicate highly correlated or collective movements whereas non-correlated movements average to correlation functions close to zero. If structures move in the opposite direction, they are anti-correlated with negative correlation functions. Therefore the squared correlation function, averaged over all distances An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e064.jpg, An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e065.jpg is a measure for the level of correlation at each point in time. C shows the time course of this averaged squared correlation function in which time points with highly correlated movements appear as peaks. To quantify the level of correlation, we introduce a global cutoff An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e066.jpg. Modes in An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e067.jpg that exceed An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e068.jpg are defined as collective or correlated modes and modes with an An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e069.jpg are not-correlated.

(TIF)

Figure S2

Dependence of the stall time distribution on the ATP concentration. Low ATP concentrations (10 M, blue circles) show longest stall times, while intermediate ATP concentrations (green, 50 M, crosses or 100 M, triangles) exhibit short stalling times. At high ATP concentrations (red, 0.5 mM, open diamonds, 1 mM, squares or 2 mM, pentagrams, respectively), the stall times increase again due to the lower forces the myosin-II filaments can exert.

(TIF)

Movie S1

Correlated dynamics of actin/fascin/myosin networks. Active actin networks exhibit dynamic reorganizations (arrows indicate the movement of individual points in the network averaged over three frames. Lengths of the arrows are 20-fold magnified). The long range reorganizations show collective phases (velocity arrows are shown in green) during which the majority of the structures move simultaneously. The collectivity in the network is measured by the average squared velocity cross correlation function An external file that holds a picture, illustration, etc.
Object name is pone.0023798.e070.jpg. Here, phases of collective movement are reflected as peaks above 0.15 (solid black line).

(MOV)

Movie S2

Passive actin/fascin/myosin networks. In absence of ATP, an actin/fascin/myosin network forms small and largely monodisperse clusters which move in a diffusive or subdiffusive manner.

(MOV)

Movie S3

Dynamics at high ATP concentrations. Active actin/fascin/myosin networks in presence of high ATP concentrations (1 mM) show dynamic reorganizations resulting in the formation of large clusters. Collective phases are not observed.

(MOV)

Acknowledgments

We thank M. Rusp, K. Vogt and G. Chmel for assistance in protein purification.

Footnotes

Competing Interests: The authors have declared that no competing interests exist.

Funding: The authors thank the DFG in the framework of the SFB 863, the German Excellence Initiative ‘International Graduate School for Science and Engineering’ and ‘Nanosystems Initiative Munich’ for financial support. V.S. acknowledges support from the Elite Network of Bavaria by the graduate programme CompInt. For the writing of the final manuscript, A.R.B. acknowledges the generous support and hospitality of the KITP through the National Science Foundation under Grant No. NSF PHY05-51164. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.

References

1. Martin AC, Kaschube M, Wieschaus EF. Pulsed contractions of an actin-myosin network drive apical constriction. Nature. 2009;457:495–9. [PMC free article] [PubMed]
2. Martin AC, Gelbart M, Fernandez-Gonzalez R, Kaschube M, Wieschaus EF. Integration of contractile forces during tissue invagination. J Cell Biol. 2010 10.1083/jcb.200910099. [PMC free article] [PubMed]
3. Karsenti E. Self-organization in cell biology: a brief history. Nat Rev Mol Cell Biol. 2008;9:255–62. [PubMed]
4. Joanny JF, Juelicher F, Kruse K, Prost J. Hydrodynamic theory for multi-component active polar gels. New J Phys. 2007;9:422.
5. Solon J, Kaya-Copur A, Colombelli J, Brunner D. Pulsed forces timed by a ratchet-like mechanism drive directed tissue movement during dorsal closure. Cell. 2009;137:1331–42. [PubMed]
6. Evans E, Ritchie K. Dynamic strength of molecular adhesion bonds. Biophys J. 1997;72:1541–55. [PMC free article] [PubMed]
7. Koehler S, Schaller V, Bausch AR. Structure formation in active networks. Nat Mater. 2011;10:462–8. [PubMed]
8. Humphrey D, Duggan C, Saha D, Smith D, Käs JA. Active fluidization of polymer networks through molecular motors. Nature. 2002;416:413–6. [PubMed]
9. Smith D, et al. Molecular motor-induced instabilities and cross linkers determine biopolymer organization. Biophys J. 2007;93:4445–52. [PMC free article] [PubMed]
10. Mizuno D, Tardin C, Schmidt CF, Mackintosh FC. Nonequilibrium mechanics of active cytoskeletal networks. Science. 2007;315:370–3. [PubMed]
11. Koenderink GH, et al. Liquids and structural glasses special feature: An active biopolymer network controlled by molecular motors. Proc Natl Acad Sci USA. 2009;106:15192–7. [PMC free article] [PubMed]
12. Backouche F, Haviv L, Groswasser D, Bernheim-Groswasser A. Active gels: dynamics of patterning and self-organization. Phys Biol. 2006;3:264–73. [PubMed]
13. Kane RE. Interconversion of structural and contractile actin gels by insertion of myosin during assembly. J Cell Biol. 1983;97:1745–52. [PMC free article] [PubMed]
14. Janson LW, Kolega J, Taylor DL. Modulation of contraction by gelation/solation in a reconstituted motile model. J Cell Biol. 1991;114:1005–15. [PMC free article] [PubMed]
15. Bendix PM, et al. A quantitative analysis of contractility in active cytoskeletal protein networks. Biophys J. 2008;94:3126–36. [PMC free article] [PubMed]
16. Cooke R, Bialek W. Contraction of glycerinated muscle fibers as a function of the atp concentration. Biophys J. 1979;28:241–58. [PMC free article] [PubMed]
17. Debold EP, Patlak JB, Warshaw DM. Slip sliding away: load-dependence of velocity generated by skeletal muscle myosin molecules in the laser trap. Biophys J. 2005;89:L34–6. [PMC free article] [PubMed]
18. Metzler R, Klafter J. The random walk's guide to anomalous diffusion: a fractional dynamics approach. Physics Reports. 2000;339:1–77.
19. Metzler R, Klafter J. Accelerating brownian motion:A fractional dynamics approach to fast diffusion. Europhys Lett. 2000;51:492–98.
20. Kron SJ, Spudich JA. Fluorescent actin filaments move on myosin fixed to a glass surface. Proc Natl Acad Sci USA. 1986;83:6272–6. [PMC free article] [PubMed]
21. Brenner B, Schoenberg M, Chalovich JM, Greene LE, Eisenberg E. Evidence for cross-bridge attachment in relaxed muscle at low ionic strength. Proc Natl Acad Sci USA. 1982;79:7288–91. [PMC free article] [PubMed]
22. Katsura I, Noda H. Studies on the formation and physical chemical properties of synthetic myosin filaments. Journal of Biochemistry. 1971;69:219–29. [PubMed]
23. Takiguchi K, Hayashi H, Kurimoto E, Higashi-Fujime S. In vitro motility of skeletal muscle myosin and its proteolytic fragments. Journal of Biochemistry. 1990;107:671–9. [PubMed]
24. Margossian SS, Lowey S. Preparation of myosin and its subfragments from rabbit skeletal muscle. Meth Enzymol. 1982;85 Pt B:55–71. [PubMed]
25. Spudich JA, Watt S. The regulation of rabbit skeletal muscle contraction. i. biochemical studies of the interaction of the tropomyosin-troponin complex with actin and the proteolytic fragments of myosin. J Biol Chem. 1971;246:4866–71. [PubMed]
26. MacLean-Fletcher S, Pollard TD. Identification of a factor in conventional muscle actin preparations which inhibits actin filament self-association. Biochem Biophys Res Commun. 1980;96:18–27. [PubMed]
27. Vignjevic D, et al. Formation of filopodia-like bundles in vitro from a dendritic network. J Cell Biol. 2003;160:951–62. [PMC free article] [PubMed]
28. Liverpool D, Marchetti CM. Instabilities of Isotropic Solutions of Active Polar Filaments. Phys Rev Lett. 2003;90:138102. [PubMed]
29. Crocker JC, Grier DG. Methods of digital video microscopy for colloidal studies. J Colloid Interface Sci. 1996;179:298–310.

Articles from PLoS ONE are provided here courtesy of Public Library of Science
PubReader format: click here to try

Formats:

Related citations in PubMed

See reviews...See all...

Cited by other articles in PMC

See all...

Links

Recent Activity

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

See more...