• We are sorry, but NCBI web applications do not support your browser and may not function properly. More information
Logo of nihpaAbout Author manuscriptsSubmit a manuscriptNIH Public Access; Author Manuscript; Accepted for publication in peer reviewed journal;
Biomaterials. Author manuscript; available in PMC Mar 1, 2012.
Published in final edited form as:
PMCID: PMC3035968
NIHMSID: NIHMS256940

Chimeric fibronectin matrix mimetic as a functional growth- and migration-promoting adhesive substrate

Abstract

Therapeutic protein engineering combines genetic, biochemical, and functional information to improve existing proteins or invent new protein technologies. Using these principles, we developed an approach to deliver extracellular matrix (ECM) fibronectin-specific signals to cells. Fibronectin matrix assembly is a cell-dependent process that converts the inactive, soluble form of fibronectin into biologically-active ECM fibrils. ECM fibronectin stimulates cell functions required for normal tissue regeneration, including cell growth, spreading, migration, and collagen reorganization. We have developed recombinant fibronectin fragments that mimic the effects of ECM fibronectin on cell function by coupling the cryptic heparin-binding fragment of fibronectin’s first type III repeat (FNIII1H) to the integrin-binding domain (FNIII8-10). GST/III1H,8-10 supports cell adhesion and spreading and stimulates cell proliferation to a greater extent than plasma fibronectin. Deletion and site-specific mutant constructs were generated to identify the active regions in GST/III1H,8-10 and reduce construct size. A chimeric construct in which the integrin-binding, RGDS loop was inserted into the analogous site in FNIII8 (GST/III1H,8RGD), supported cell adhesion and migration, and enhanced cell proliferation and collagen gel contraction. GST/III1H,8RGD was expressed in bacteria and purified from soluble lysate fractions by affinity chromatography. Fibronectin matrix assembly is normally up-regulated in response to tissue injury. Decreased levels of ECM fibronectin are associated with non-healing wounds. Engineering fibronectin matrix mimetics that bypass the need for cell-dependent fibronectin matrix assembly in chronic wounds is a novel approach to stimulating cellular activities critical for tissue repair.

Keywords: fibronectin, recombinant protein, extracellular matrix, cell proliferation, cell adhesion

1. Introduction

Fibronectin is an abundant glycoprotein that is evolutionarily conserved and broadly distributed among vertebrates [1]. Soluble fibronectin is composed of two nearly identical subunits that are joined by disulfide bonds [2]. The primary structure of each subunit is organized into three types of repeating homologous units, termed types I, II, and III. Fibronectin type III repeats are found in a number of ECM proteins and consist of two overlapping β sheets [3, 4]. Molecular modeling and atomic force microscopy studies predict that reversible unfolding of the type III repeats contributes to the remarkable elasticity of fibronectin, which may be extended up to six times its initial length without denaturation [5, 6]. In the ECM, fibronectin is organized as an extensive network of elongated, branching fibrils. The three-dimensional organization of ECM fibronectin likely arises from the ability of cells to repeatedly exert a mechanical force [7] on discrete regions of the protein [5] to facilitate the formation of fibronectin-fibronectin interactions [8]. As cells contact fibronectin fibrils, tractional forces induce additional conformational changes [9] that are necessary for both lateral growth and branching of the fibrils [10].

The polymerization of fibronectin into the ECM is a cell-dependent process that is mediated by coordinated events involving the actin cytoskeleton and integrin receptors [8, 11]. Most adherent cells, including epithelial cells, endothelial cells, fibroblasts, and smooth muscle cells, polymerize a fibrillar fibronectin matrix [1]. Recent studies have provided evidence that the interaction of cells with either the soluble or ECM form of fibronectin gives rise to distinct cellular phenotypes [1218]. ECM fibronectin stimulates cell spreading [19], growth [13, 20] and migration [21], as well as collagen deposition [22, 23] and organization [18]. Others have shown a role for fibronectin matrix assembly in the deposition of fibrinogen [24], fibrillin [25], and tenascin C [26] into the ECM. Fibronectin matrix polymerization stimulates the formation of endothelial ‘neovessels’ in collagen lattices [27]. Moreover, blocking fibronectin matrix polymerization inhibits cell growth [13, 16] and contractility [18], alters actin organization [28] and cell signaling [15], and inhibits cell migration [21]. Together, these studies indicate that fibronectin matrix polymerization plays a key role in establishing the biologically-active extracellular environment required for proper tissue function.

Fibronectin matrix assembly is rapidly up-regulated following tissue injury, while reduced fibronectin matrix deposition is associated with abnormal wound repair [29]. Altered fibronectin matrix deposition is also associated with a large number of chronic diseases including asthma, liver cirrhosis, and atheroscelerosis [2931]. Given the role of the fibronectin matrix in orchestrating ECM organization and in regulating cell and tissue responses critical for tissue repair, defective or diminished fibronectin matrix deposition by cells is likely to have profound effects on the ability of tissues to heal. Therapies that provide injured cells with synthetic fibronectin matrices have the potential to stimulate or correct defects in ECM deposition or organization and thus, have important applications to the treatment of chronic, degenerative illnesses.

In earlier studies, we localized the ECM-specific effects of fibronectin to a cryptic heparin-binding site in the first type III module of ECM fibronectin [19, 21, 32, 33]. This conformation-dependent site is not exposed in soluble fibronectin [32, 34, 35] but becomes unmasked either during fibronectin matrix assembly or when cells and tissues exert tension on polymerized fibronectin fibrils [33, 36]. In the present study, we have engineered several recombinant fibronectin constructs that incorporate the “open” conformation of FNIII1 and thus, mimic the ECM form of fibronectin. We compare the ability of ECM fibronectin mimetics to support cell adhesion, proliferation, migration, and collagen reorganization to that of full-length fibronectin and integrin-binding fibronectin fragments.

2. Materials and Methods

2.1. Reagents, antibodies, and cells

Human plasma fibronectin was isolated from Cohn’s fraction I and II [37]. Type I collagen was extracted from rat tail tendons using acetic acid and precipitated with NaCl [38]. Human fibrinogen was a gift from Dr. Patricia Simpson-Haidaris (University of Rochester, Rochester, NY). Recombinant vitronectin was expressed and purified as described [39]. GRGDSP peptides were obtained from Sigma (St. Louis, MO). FN12-8 monoclonal antibody was obtained from Takara (Madison, WI); horseradish peroxidase-conjugated goat anti-mouse antibody was from Bio-Rad (Hercules, CA). Tissue culture supplies were from Corning/Costar (Cambridge, MA). Unless otherwise indicated, chemical reagents were from J.T. Baker (Phillipsburg, NJ) or Sigma.

Mouse embryonic fibronectin–null fibroblasts (FN-null MEFs; provided by Dr. Jane Sottile, University of Rochester, Rochester, NY) were cultured on collagen I-coated dishes under fibronectin- and serum-free conditions using a 1:1 mixture of Cellgro® (Mediatech, Herndon, VA) and Aim V (Invitrogen) [13].

2.2. Recombinant protein production and purification

A schematic of the recombinant proteins used in this study is shown in Figure 1A. FNIII1H is comprised of amino acids Ile597-Thr673 (bases 1802-2032). Recombinant GST/III1H,8-10, GST/III1H, GST/III8-10, GST/III8-10,13 and GST/III1H were produced in E. Coli and purified as described [19, 32]. A fibronectin fragment in which a C-terminal fragment of Extra domain-B (EDB-C) was coupled to the integrin-binding modules, III8-10 (GST/IIIEDB-C,8-10), was produced using the sense primer: 5′-CCCAGATCTCTGAGGTGGACCCCGCTAAAC-3′ and antisense primer: 5′-CCCCCCGGGCTATGTTCGGTAATTAATGGAAATTG-3′ (SmaI site in bold). The human fibronectin cDNA construct pCEF103 was used as a template [40]. GST/III1H,8-10ΔRRK (R613T, R615T, K617A) was produced with the forward primer 5′-CCCGGTACCATCCAGTGGAATGCACCACAGCCATCTCACATTTCCAAGTACATTCTCACGTGGACACCTGCAAATTCTGTAGGC-3′. The Kpn1 site is shown in bold and the mutant codons are underlined. The reverse primer was 5′-CCCGAATTCCTATGTGCTGGTGCTGGTGGTG-3′ with the EcoR1 site in bold. GST/III1H,8-10ΔEGQ (E647D,Q649N) was produced using the following mutant sense primer: 5′-GGTATACGACGGCAACCTGATCAGCATCCAGCACTACG-3′. Mutations are underlined; a BstZ17I site is shown in bold. The antisense primer for GST/III1H,8-10ΔEGQ was the same as that used for GST/III1H,8-10 (5′-CCCCCCGGGCTATGTTCGGTAATTAATGGAAATTG-3′), which contains a Sma1 site (bold). Human full-length fibronectin cDNA pFH100 was used as a template.

Figure 1
Fibronectin fusion proteins

Recombinant fibronectins that contained deletions to type III modules within the cell binding domain were made using GST/III1H,8-10 plasmid DNA as the template. The sense primer, beginning in FNIII1, for these constructs was: 5′-CCCGGATCCATCCAGTGGAATGCACCACAG-3′. The BamH1 site is shown in bold. GST/III1H,8 was made with the antisense primer: 5′-GTCACGATCAATTCCCGGGCTATGTTTTCTGTCTTCCTCTA-3′, which contains a Sma1 site shown in bold. GST/III1H,8,10 was made with the following antisense primer that includes the 5′ end of FNIII10 and the 3′ end of FNIII8: 5′-GGTCCCTCGGAACATCAGAAACTGTTTTCTGTCTTCCTCTAAGAGG-3′. An AlwNI site is shown in bold. GST/III1H,10 was made using the antisense primer: 5′-CCAGGTCCCTCGGAACATCAGAAACTGTGCTGGTGCTGGTGG-3′, which runs from the PpuMI site in FNIII10 (bold) into the 3′ end of FNIII1-H. GST/III1H,9-10 was made by first engineering a ClaI site (bold) into FNIII1H of pGEX-2T/III1H,8-10 with the sense primer: 5′-GGTATACGAGGGCCAGCTCATATCGATCCAGCAGTACGG-3′. The BstZ17I site in FNIII1 is underlined. FNIII1H was then coupled directly to FNIII9 by deleting FNIII8 from pGEX2T/III1H,8-10 with the sense primer: 5′-CATATCGATCCAGCAGTACGGCCACCAAGAAGTGACTCGCTTTGACTTCACCACCACCAGC ACCAGCACAGGTCTTGATTCCCCAACTGG-3′. The Cla1 site, shown in bold, was used to move this fragment into pGEX-2T/III1H,8-10.

The RGD chimera, GST/III1H,8RGD, was produced using the following mutant sense primer: 5′-GTGAGTGTCTCCAGTGTCTACGGCCGTGGAGACTCGCCGGCAAGCAGCACACCTCTTAGAG GAAGACAGAAAACATAGGAATTCA-3′. The insert from FNIII10 (bases 4487–4510 in pFH100; underlined), which encodes for the GRGDSPAS sequence, was inserted between base 3946 and base 3959 (Y1402 and S1407) of FNIII8, leading to the addition of four amino acids (RGDS) to FNIII8. The EcoR1 site is shown in bold. The FNIII10 insert contains an engineered NgoMIV site as a marker. The antisense primer for GST/III1H,8RGD (5′-GGTATACGAGGGCCAGCTCATATCGATTCAGCAGTACGGCC-3′) contains a BstZ17I site shown in bold. GST/III8RGD was engineered using pGEX-2T/III1H,8RGD as a template. The sense primer used was: 5′-CGGATCCGCTGTTCCTCCTCCCACTGACCTGCG-3′, with the BamHI site shown in bold. The antisense primer for GST/III8RGD (5′-CGAATTCCTATGTTTTCTGTCTTCC-3′) contains an EcoRI site shown in bold. For all protein constructs, PCR-amplified DNA was cloned into pGEX-2T (Amersham Biosciences) and transfected into DH5α bacteria [32]. DNA was sequenced to confirm the presence of the mutations. GST-tagged fibronectin constructs were isolated on glutathione-Sepharose (Amersham Biosciences) and dialyzed extensively against PBS [34]. Proteins were filter-sterilized and purity was assessed by SDS-polyacrylamide gel electrophoresis [32] (Fig. 1B). Purified proteins were stored in aliquots at −80°C.

2.3. Cell adhesion and proliferation assays

Tissue culture plates (48- or 96-well) were coated with recombinant fibronectin proteins or full-length ECM proteins diluted in PBS at the indicated concentrations for 90 min at 37°C. Unbound protein was removed and wells were washed with PBS. For cell proliferation assays, FN-null MEFs were seeded at 2.5 × 103 cells/cm2 in Aim V/Cellgro and incubated for 4 days at 37°C, 8% CO2. For cell adhesion assays, FN-null MEFs were seeded at 1.5 × 105 cells/cm2 in Aim V/Cellgro and cells were allowed to adhere for 30 min at 37°C, 8% CO2. After incubation, cells were washed with PBS and fixed with 1% paraformaldehyde. Cells were stained with 0.5% crystal violet, solubilized in 1% sodium dodecyl sulfate (SDS), and the absorbance at 590 nm was measured with a microplate spectrophotometer (Bio-Rad) [41].

2.4. Solid-phase enzyme linked immunosorbent assay

Tissue culture plates (96-well) were incubated with recombinant fibronectin proteins or plasma fibronectin diluted in PBS at the indicated concentrations for 90 min at 37°C. Wells were washed with PBS to remove unbound protein, then blocked with 1% BSA in PBS. Bound proteins were detected using an anti-FNIII10 monoclonal antibody (FN12-8, 1 μg/ml) followed by horseradish peroxidase-conjugated goat anti-mouse secondary antibodies. Wells were washed with PBS and the assay was developed using 2,2-azino-bis(3-ethylbenzthiazolinesulfonic acid) and the absorbance at 405 nm was measured.

2.5. Cell migration assay

An in vitro wound repair assay was used to measure cell migration [21]. Tissue culture plates (35-mm) were coated with recombinant fibronectin constructs or full-length fibronectin at 200 nM in PBS for 90 min at 37°C. FN-null MEFs were seeded at 7.4 × 104 cells/cm2 in Aim V/Cellgro. Cells were allowed to adhere and spread for either 4 or 16 h to establish a confluent monolayer. A thin section of the monolayer was carefully removed with a sterile, plastic microspatula. Cells were washed twice with Aim V/Cellgro. Five non-overlapping regions of the wound were viewed immediately after wounding with an Olympus inverted microscope using a 4x objective (time = 0 h). Phase contrast images of each region were obtained using a Spot digital camera (Diagnostic Instruments, Sterling Heights, MI). Images were obtained of the five non-overlapping regions at various times after wounding. A numbered grid was marked on the bottom of the tissue culture plates prior to cell seeding to ensure that the same regions were being photographed at each time point. The average width of the initial wound was ~500 μm. Wound area measurements were obtained using ImagePro-Plus software (Media Cybernetics, Silver Spring, MD). Cell migration was calculated as original cleared area (time = 0 h) – cleared area (time = 2, 4, 6, or 8 h).

2.6. Collagen gel contraction assay

Collagen gel contraction assays were performed as described previously [18]. Neutralized collagen gels were prepared by mixing collagen type I with 1x Dulbecco’s modified Eagle’s medium (DMEM; Life Technologies), 2X concentrated DMEM, and 0.1 NaOH on ice for final concentrations of 0.8 mg/ml collagen and 1X DMEM, pH 7.2. FN-null MEFs were added to the collagen mixture to a final concentration of 2 × 105 cells/ml. An equal volume of Aim V/Cellgro was added to aliquots of the collagen mixture for ‘no cell’ controls. Recombinant fibronectin proteins or plasma fibronectin were added to the collagen/cell mixtures at various concentrations. Aliquots (0.1 ml) of the collagen/cell mixture were added to wells of tissue culture plates (96-well) precoated with 2% BSA in PBS. Gels were allowed to polymerize for 1 h at 37°C, 8% CO2. To form floating gels, DMEM (0.1 ml/well) was added and wells were scored with a pipette tip. Following a 20 h incubation at 37°C, 8% CO2, gels were removed from their wells and weighed (Model AE260, Mettler, Toledo, OH). Volumetric collagen gel contraction was calculated as the decrease in gel weight relative to the control, no-cell gel weight.

2.7. Statistical analysis

Data are presented as mean ± standard error of the mean (SEM) and represent one of at least three experiments performed in either triplicate or quadruplicate. Statistical comparisons were performed using one-way analysis of variance (ANOVA) followed by Tukey’s post-test, with GraphPad Prism Version 4 software (LaJolla, CA). Differences were considered significant for p values less than 0.05.

3. Results

3.1. Recombinant fibronectin fragments as adhesive substrates

We previously developed a recombinant fibronectin construct (GST/III1H,8-10) that mimics many of the cellular effects of ECM fibronectin, by directly coupling the cryptic, heparin-binding fragment of the first type III repeat of fibronectin to the integrin-binding domain [32]. Addition of soluble GST/III1H,8-10 to the culture media of adherent FN-null MEFs enhances cell spreading, growth, and contractility [32], increases the migration rate of small airway epithelial cells [21], and induces local arteriolar vasodilation in vivo [33]. To develop fibronectin matrix mimetics as functional ligands for adhesive biomaterials, studies were conducted to characterize the proliferative response of FN-null MEFs cells to immobilized GST/III1H,8-10. The use of FN-null MEFs in the current study allows us to characterize cell behavior in response to the recombinant fibronectin proteins in the absence of endogenous full-length fibronectin and to identify specific effects of individual domains and amino acid sequences of fibronectin on cell function. Cells were seeded at low density onto tissue culture plates coated with various recombinant fibronectin fragments and cell number was determined after 4 days. The extent of cell proliferation on GST/III1H,8-10-coated substrates was compared to that observed in response to substrates coated with the following ligands: (i) an integrin-binding fragment lacking FNIII1H (GST/III8-10), (ii) a construct in which the carboxyl-terminal heparin-binding domain of fibronectin was coupled to FNIII8-10 (GST/III8-10,13), and (iii) plasma fibronectin. At 24 hours after seeding, cells adherent to the fusion protein substrates were well-spread and displayed morphologies similar to that observed with cells adherent to plasma fibronectin (Fig. 2A). Cells proliferated over the 4 day period on all substrates tested and formed a near-confluent monolayer on substrates coated with GST/III1H,8-10 (Fig. 2A). Relative cell number on Day 4 was quantified as a function of protein coating concentration. Cell number on surfaces pre-coated with either 200 nM or 400 nM GST/III1H,8-10 was significantly greater than that observed on surfaces pre-coated with either plasma fibronectin or the integrin-binding fragment, GST/III8-10 (Fig. 2B). Average cell numbers obtained from surfaces pre-coated with GST/III1H,8-10 at 200 nM were 1.32 ± 0.08 (n = 5) and 1.49 ± 0.05 (n = 15) -fold greater than those obtained on surfaces coated with the same molar concentration of plasma fibronectin or GST/III8-10, respectively. The increase in cell number observed on GST/III1H,8-10-coated surfaces required FNIII1H, as cell number on GST/III8-10,13-coated surfaces was similar to GST/III8-10-coated surfaces (Fig. 2B).

Figure 2
GST/III1H,8-10 exhibits greater growth-promoting activity than fibronectin

To compare ligand densities of the substrates, ELISAs were performed on tissue culture plates coated with increasing concentrations of protein. At protein coating concentrations less than 200 nM, differences in the relative amount of protein bound to the tissue culture plastic were observed, with GST/III8-10 and plasma fibronectin binding more efficiently than either GST/III1H,8-10 or GST/III8-10,13 (Fig. 3A). For all fusion proteins tested, ligand surface density reached saturation at a concentration of 200 nM. No differences in ligand density were observed among the various recombinant fusion proteins at coating concentrations of 200 nM and 400 nM (Fig. 3A). The ligand density of plates coated with plasma fibronectin at 400 nM was slightly greater than that observed with the recombinant proteins (Fig. 3A). Together, these data indicate that the increase in cell number observed on substrates coated with GST/III1H,8-10 (Fig. 2B) was not due to differences in the coating density of the proteins.

Figure 3
Analysis of protein surface adsorption and cell adhesion

To quantify cell attachment to the various proteins, adhesion assays were performed 30 min after seeding cells at high density onto tissue culture plates pre-coated with increasing concentrations of protein. No differences in cell number were detected among the various groups at coating concentrations greater than 50 nM (Fig. 3B), indicating that the differences in cell number observed after 96 h were not due to differences in initial cell adhesion. As expected, cells did not adhere to wells coated with GST alone (Fig. 3B). Taken together, these data indicate that surfaces coated with GST/III1H,8-10 support cell adhesion and spreading and promote cell proliferation to a greater extent than surfaces coated with either plasma fibronectin or fragments with only integrin-binding activity.

3.2. Role of FNIII1H in proliferation

To further evaluate the role of FNIII1H in the proliferative response to GST/III1H,8-10, a fusion protein was produced in which the analogous C-terminal region of the ED-B module of fibronectin was substituted for FNIII1H (GST/IIIEDB-C,8-10). FN-null MEFs were seeded onto surfaces coated with 200 nM GST/III1H,8-10, GST/IIIEDB-C,8-10, GST/III8-10, or GST/III1H and cell number was determined after 96 h. Similar to results shown in Fig. 2B, surfaces coated with GST/III1H,8-10 produced a significant increase in cell number versus surfaces coated with either GST/III8-10 or GST/IIIEDB-C,8-10 (Fig. 4A). No difference in initial cell adhesion to surfaces coated with GST/III1H,8-10, GST/III8-10, or GST/IIIEDB-C,8-10 were observed (Fig. 4B). Surfaces coated with GST/III1H alone did not support either cell adhesion (Fig. 4B) or proliferation (Fig. 4A).

Figure 4
FNIII1H is essential for the enhanced growth response

We previously localized the growth-promoting site in soluble GST/III1H,8-10 to the heparin-binding sequence, Arg613-Trp614-Arg615-Pro616-Lys617, in FNIII1 [19]. To further localize the growth-stimulating site in FNIII1H, a construct was produced in which only the charged amino acid sequences within the R613WRPK sequence were mutated to non-charged amino acids (R613T, R615T, K617A; GST/III1H,8-10ΔRRK). An additional control fusion protein was produced in which a separate, highly conserved sequence in FNIII1H, E647G648Q649, was mutated (E647D, Q649N; GST/III1H,8-10ΔEGQ). FN-null MEFs were seeded onto surfaces coated with 200 nM of the various fusion proteins and cell number was determined after 96 h. Cell number on surfaces coated with GST/III1H,8-10ΔRRK was less than that observed on surfaces coated with GST/III1H,8-10, and was similar to that observed on GST/III8-10,13-coated surfaces (Fig. 4C). Cell number on GST/III1H,8-10ΔEGQ was not different than that observed on GST/III1H,8-10 (Fig. 4C), providing additional evidence that the growth-promoting activity of FNIII1 is specific to Arg613, Arg615, Lys617and that differences in cell number were not due to non-specific structural changes in the mutated protein. No differences in initial cell adhesion were observed among the groups (Fig. 4D). Taken together, these results indicate that the Arg613_Arg615_Lys617 sequence in FNIII1H mediates the enhanced growth response to GST/III1H,8-10, but that in the absence of FNIII8-10, FNIII1H is unable to support cell adhesion.

3.3. Role of integrin-binding modules in proliferation

FNIII8, FNIII9, and FNIII10 form the primary integrin-binding region of fibronectin, regulating cell adhesion and cell surface receptor specificity [11]. FNIII10 contains the integrin-binding, RGD sequence [42], whereas FNIII9 contains a sequence, termed the synergy site, which promotes binding to α5β1 integrins [43]. Thus far, our data indicate that the integrin-binding domain, FNIII8-10, is necessary for adhesion and growth in response to GST/III1H,8-10 (Fig. 4). To determine whether all three integrin-binding modules are necessary for the proliferative response to GST/III1H,8-10, a series of fusion proteins were produced in which one or two modules within the integrin-binding region were deleted. The modules deleted and the constructs produced were: (i) FNIII9 (GST/III1H,8,10), (ii) FNIII8 (GST/III1H,9-10), (iii) FNIII8 and FNIII9 (GST/III1H,10), and (iv) FNIII9 and FNIII10 (GST/III1H,8). FN-null MEFs were seeded onto surfaces coated with the various fusion proteins and cell number was determined on Day 4. Deleting FNIII9 from GST/III1H,8-10 did not lead to a difference in cell number compared to the original matrix mimetic (GST/III1H,8,10 versus GST/III1H,8-10; Fig. 5A). In contrast, deleting FNIII8 from GST/III1H,8-10 resulted in a reduction in cell number on Day 4 (GST/III1H,9-10 and GST/III1H,10 versus GST/III1H,8-10; Fig. 5A). Cell adhesion to surfaces coated with GST/III1H,8,10, GST/III1H,9-10 or GST/III1H,10 was similar to that observed on GST/III1H,8-10-coated surfaces (Fig. 5B), indicating that the differences in cell number observed on Day 4 were not due to differences in initial cell attachment. Cells did not adhere to the construct lacking FNIII10 (GST/III1H,8; Fig. 5B), indicating that FNIII8 cannot support cell adhesion in the absence of FNIII10. Taken together, these data indicate that GST/III1H,8,10 supports cell adhesion and promotes cell growth to a similar extent as the original construct, GST/III1H,8-10. In addition, FNIII8 and FNIII10, but not FNIII9, are required for the full proliferative response to the fibronectin matrix mimetics.

Figure 5
FNIII8 and FNIII10 are required for cell growth responses

3.4. Development of RGD-chimeras

The cell attachment activity of fibronectin can be duplicated by peptides containing the highly conserved, integrin-binding Arg-Gly-Asp (RGD) sequence [42]. To further refine GST/III1H,8,10 as a fibronectin matrix mimetic, we engineered fusion proteins in which FNIII10 was deleted and instead, the adhesive RGDS sequence was inserted into FNIII8. To do so, we took advantage of the fact that the RGDS sequence in FNIII10 is located in a unique loop connecting β-strands F and G [44], and inserted the FNIII10 sequence, Arg-Gly-Asp-Ser-Pro-Ala-Ser (GRGDSPAS) into the analogous site in FNIII8. Two fusion proteins were produced: (i) GST/III1H,8RGD and (ii) GST/III8RGD. Cell adhesion assays were conducted to compare cell attachment activities of the RGD chimeras to the original construct, GST/III1H,8-10. Cell adhesion to surfaces coated with GST/III1H,8RGD was similar to that observed on GST/III1H,8-10-coated surfaces at all protein coating concentrations (Fig. 6A). Cells did not adhere to GST/III1H lacking the RGD sequence (Fig. 6A). These data indicate that the adhesive activity of FNIII10 can be duplicated by inserting the RGDS-loop into FNIII8.

Figure 6
Chimeric matrix mimetics support cell adhesion and growth

To assess the RGD-containing chimeras as growth-promoting adhesive substrates, FN-null MEFs were seeded onto wells coated with 200 nM of the various fusion proteins and cell number was determined after 96 h. Surfaces coated with GST/III1H,8RGD supported a similar level of cell growth as did surfaces coated with the original mimetic, GST/III1H,8-10 (Fig. 6B), and was greater than that observed with cells adherent to surfaces coated with RGD peptides alone (Fig. 6B). Of note, after 4 days, cells were no longer adherent to wells coated with GRGDSP peptides (Fig. 6B).

Dose-response studies indicate that the growth-promoting activity of GST/III1H,8RGD was nearly identical to that of GST/III1H,8-10 at various protein coating concentrations (Fig. 7A). Removal of FNIII1H from GST/III1H,8RGD (GST/III8RGD) resulted in significantly lower cell number on Day 4 (Fig. 7A), providing further evidence that the heparin-binding fragment of FNIII1 is required for the enhanced cell growth response. No differences in initial cell adhesion were observed on surfaces coated with GST/III8RGD, GST/III1H,8-10 and GST/III1H,8RGD (Fig. 7B). Furthermore, a comparison of the proliferative activity of the fibronectin matrix mimetics to that of other intact ECM ligands revealed that surfaces coated with GST/III1H,8RGD promoted cell growth to a similar extent as vitronectin-coated surfaces, and to a greater extent than that observed for fibrinogen- or gelatin-coated surfaces (Fig. 8). Taken together, these data indicate that by inserting the RGD loop into FNIII8, both FNIII9 and FNIII10 can be removed from the initial matrix mimetic without loss of cell adhesion and growth-promoting activity.

Figure 7
Role of FNIII1H in the proliferative response to GST/III1H,8RGD
Figure 8
Proliferative response to fibronectin matrix mimetics versus other ECM proteins

3.5. Matrix mimetics and cell migration

We next assessed the ability of the recombinant fibronectin constructs to support cell migration using an in vitro assay of wound repair. FN-null MEFs were seeded at high densities onto surfaces coated with 200 nM of the various fusion proteins and allowed to form confluent monolayers. A region of the monolayer was then removed and migration of cells into the denuded space was quantified. Surfaces coated with either the original matrix mimetic (GST/III1H,8-10) or the integrin-binding fragment of fibronectin (GST/III8-10) promoted cell migration into the denuded area to a greater extent than surfaces coated with intact, plasma fibronectin (Fig. 9A). Substituting the heparin-binding module, FNIII13, for FNIII1H decreased the rate of cell migration (GST/III1H,8-10 versus GST/III8-10,13; Fig. 9A), resulting in a rate of migration similar to that of plasma fibronectin-coated surfaces (GST/III8-10,13 versus FN; Fig. 9A).

Figure 9
Fibronectin matrix mimetics support cell migration

Similar to results obtained in the growth assays (Fig. 5A), removal of FNIII9 from the original matrix mimetic did not reduce the rate of cell migration, which was similar to that of the integrin-binding fragment, GST/III8-10 (GST/III1H,8,10 versus GST/III8-10, Fig. 9B). The rate of cell migration on surfaces coated with the growth-promoting, chimeric construct, GST/III1H,8RGD, was similar to that of plasma fibronectin (Fig. 9B). Removing FNIII8 from GST/III1H,8,10 decreased the rate of cell migration (GST/III1H,10 versus GST/III1H,8,10; Fig. 9C), indicating a possible role for FNIII8 in promoting higher rates of cell migration. These data indicate that as adhesive substrates, the recombinant fibronectin matrix mimetics equal or exceed the ability of plasma fibronectin to promote cell migration.

3.6. Matrix mimetics and collagen reorganization

Collagen gel contraction assays are utilized as in vitro models of collagen matrix reorganization during wound repair [45]. Our previous studies showed that fibronectin matrix polymerization stimulates collagen gel contraction [18] and that this activity is mimicked by the original matrix mimetic, GST/III1H,8-10 [32]. To assess the ability of the new fibronectin matrix mimetics to stimulate collagen gel contraction, FN-null MEFs were embedded in collagen gels and the extent of contraction after 20 h was determined. As shown previously [32], addition of plasma fibronectin or the original matrix mimetic (GST/III1H,8-10) to FN-null MEFs embedded in floating collagen gels stimulated collagen gel contraction (Fig. 10). Addition of either GST/III1H,8,10 or GST/III1H,8RGD to cell-embedded collagen gels stimulated collagen gel contraction to a similar extent as that observed in response to the original matrix mimetic, GST/III1H,8-10 (Fig. 10). The extent of collagen gel contraction in response to GST/III1H,8,10 and GST/III1H,8RGD was significantly greater than that observed in response to the control protein, GST (Fig. 10).

Figure 10
Fibronectin matrix mimetics stimulate collagen gel contraction

4. Discussion

We have developed several recombinant fibronectin proteins that couple the “open” conformation of FNIII1 with integrin-binding sequences in order to mimic the effects of the ECM form of fibronectin on cell growth and migration. We compared the bioactivity of the fibronectin matrix mimetics to full-length, plasma fibronectin and to integrin-binding fragments and peptides. Our studies show that a chimeric fibronectin fragment composed of FNIII1H and FNIII8, with the RGDS loop inserted into FNIII8, supports cell adhesion and migration, stimulates collagen gel reorganization, and displays enhanced proliferative activity over integrin-binding fibronectin fragments and other full-length ECM proteins. We localized the growth-promoting activity in FNIII1H to amino acids Arg613, Arg615, and Lys617, and present new evidence that FNIII8 has cell growth- and migration-promoting properties.

Surfaces presenting the RGD-loop in FNIII8 exhibited identical adhesive activities compared to the original matrix mimetic (GST/III1H,8-10; Fig. 6A), which was comparable to that observed with integrin-binding fragments (Fig. 3B). Deleting FNIII9 from the original matrix mimetic did not decrease the proliferation response of cells (Fig. 5A) and was not required for cell migration (Fig. 9B), indicating that binding of the PHSRN sequence in FNIII9 to α5β1 integrins [43, 46] does not contribute to the observed activities. Surfaces coated with the chimeric RGD-construct produced higher levels of cell growth over surfaces coated with linear GRGDSP peptides (Fig. 6B), suggesting that the structural framework of the FNIII module provides support for the RGD loop to allow for higher affinity interactions with integrin receptors [47]. The growth-promoting activity of the chimeric fibronectin matrix mimetic, GST/III1H,8RGD, was comparable to that of the ECM protein, vitronectin, and was greater than that observed for other full-length ECM substrates including fibrinogen and gelatin (Fig. 8). Thus, tethering or incorporating chimeric fibronectin matrix mimetics into biomaterials could provide robust proliferative activity to tissue-engineered scaffolds and medical devices.

The bioactivities of the fibronectin fragments tested were not identical. Surfaces coated with either GST/III1H,8-10 or GST/III1H,8,10 induced high-growth and high-migration responses; GST/III1H,8RGD-coated surfaces provided high-growth and moderate-migration activities; GST/III8-10 induced low-growth but high-migration activities. Hence, engineering interfaces with different fibronectin matrix mimetics and fragments may represent a strategy to spatially pattern different cellular responses. In contrast to results obtained in the growth studies, a large decrease in cell migration rate occurred when FNIII10 was removed and replaced by the RGD loop (compare Fig. 6B with Fig. 9B), suggesting that an auxiliary site in FNIII10 [47] may contribute to enhanced cell migration, but not to enhanced cell growth. On the other hand, deletion of FNIII8 from GST/III1H,8-10 reduced both growth (Fig. 5A) and migration (Fig. 9C). Previous studies have identified a region within the amino-terminus of FNIII8 that is involved in cell adhesion [48]. Taken together, the results suggest that at least two additional sites within the cell-binding domain of fibronectin, one in FNIII10 and one in FNIII8, contribute to integrin-mediated cellular responses.

Proteolysis of the first type III repeat of fibronectin at residue Ile597 removes both the A and B β strands and results in a carboxyl-terminal fragment that binds to heparin [49]. Our previous studies localized the growth-promoting activity of GST/III1H,8-10 to the heparin-binding sequence, K611_R615WR_K619. Here, we demonstrate that FNIII1H is also required for the enhanced growth response to surfaces coated with GST/III1H,8-10 and further, we pinpoint the growth-enhancing sequence in FNIII1 to R613, R615, and K617. The cell surface receptor that binds to FNIII1H is currently unknown. Our previous work suggests that FNIII1 interacts with cells via heparan sulfate proteoglycans [32]. Aortic smooth muscle cells adhere to surfaces coated with micromolar concentrations of a similar FNIII1 fragment, III1-C, via a heparin-dependent mechanism that involves α5β1 integrins [50]. Together, these studies suggest that FNIII1H may bind either directly or indirectly to α5β1 integrins via heparan sulfate proteoglycans to elicit cellular responses. In support of this, we have shown that FNIII1H must be directly coupled to FNIII8-10 to stimulate cell growth, as individual fragments added simultaneously to cells do not have growth-promoting effects [32]. Similarly, the proliferative response to surfaces coated with a mixture of FNIII1H and FNIII8-10 fragments was not different from that observed with GST/III8-10-coated surfaces (data not shown).

Fibronectin type III repeats are found in ~2% of all human proteins and show a high degree of structural similarity [51]. The anti-parallel β-sheets of FNIII repeats are composed of three (A, B, and E) and four (C, D, F, and G) β strands that overlap to form a hydrophobic core [3, 4], imparting a high degree of stability to the protein’s structure [52]. The six loops formed at the poles between β strands (termed AB, BC, etc.) are highly variable and can withstand extensive modification without loss of stability [53, 54]. This inherent stability likely facilitated the insertion of the RGDS sequence into the FG loop of FNIII8. The stability of fibronectin type III repeats has also allowed for the development of FNIII-domains as scaffolds for the display of binding elements [55], while an engineered FNIII scaffold is currently in Phase II trials as an anti-angiogenesis agent [51]. Both FNIII1 and FNIII8 lack cysteine residues and post-translation modifications [2], which facilitates production in bacteria. For our studies, GST/III1H,8RGD was generated with a cleavable GST-tag that allows for rapid purification via glutathione chromatography; we obtained yields of ~ 4 mg of purified GST/III1H,8RGD per liter of bacterial culture. The molecular mass of the chimeric matrix mimetic, excluding the GST-tag, is ~19 kDa. In contrast, the molecular mass of a single, soluble fibronectin molecule is ~500 kDa. The small size of the fibronectin matrix mimetic decreases potential immunogenicity, provides increased structure and stability over peptides, and reduces the number of binding sites for other receptors.

5. Conclusion

We have developed a small, chimeric fibronectin matrix mimetic by inserting the integrin-binding RGDS sequence into the FG loop of FNIII8 and then coupling FNIII8RGD to the heparin-binding fragment of FNIII1. Surfaces passively coated with GST/III1H,8RGD support cell adhesion and migration, induce collagen matrix contraction, and display enhanced proliferative activity over either integrin-binding fibronectin fragments or full-length fibronectin. These results provide proof-of-principle for the development of chimeric fibronectin type III repeats as novel adhesive ligands for synthetic biomaterials that support cell migration and stimulate high rates of cell proliferation.

Acknowledgments

This work was supported by grants GM081513 and EB008996 from the National Institutes of Health. The authors thank Katherine Wojciechowski for excellent technical assistance.

The abbreviations used are

ECM
extracellular matrix
FNIII
fibronectin type III repeat
FN-null MEFs
fibronectin-null mouse embryonic fibroblasts
GST
glutathione-S-transferase

Footnotes

Publisher's Disclaimer: This is a PDF file of an unedited manuscript that has been accepted for publication. As a service to our customers we are providing this early version of the manuscript. The manuscript will undergo copyediting, typesetting, and review of the resulting proof before it is published in its final citable form. Please note that during the production process errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal pertain.

References

1. Hynes RO, Yamada KM. Fibronectins: Multifunctional modular glycoproteins. J Cell Biol. 1982;95:369–377. [PMC free article] [PubMed]
2. Petersen TE, Thogersen HC, Skorstengaard K, Vibe-Pedersen K, Sahl P, Sottrup-Jensen L, et al. Partial primary structure of bovine plasma fibronectin: three types of internal homology. Proc Natl Acad Sci USA. 1983;80:137–141. [PMC free article] [PubMed]
3. Bork P, Doolittle RF. Proposed acquisition of an animal protein domain by bacteria. Proc Natl Acad Sci U S A. 1992;89:8990–8994. [PMC free article] [PubMed]
4. Leahy DJ, Hendrickson WA, Ankhil I, Erickson HP. Structure of a fibronectin type III domain from tenascin phased by MAD analysis of the selenomethionyl protein. Science. 1992;258:987–991. [PubMed]
5. Erickson HP. Reversible unfolding of fibronectin type III and immunoglobulin domains provides the structural basis for stretch and elasticity of titin and fibronectin. Proc Natl Acad Sci. 1994;91:10114–10118. [PMC free article] [PubMed]
6. Oberhauser AF, Badilla-Fernandez C, Carrion-Vazquez M, Fernandez JM. The mechanical hierarchies of fibronectin observed with single-molecule AFM. J Mol Biol. 2002;319:433–447. [PubMed]
7. Balaban NQ, Schwarz US, Riveline D, Goichberg P, Tzur G, Sabanay I, et al. Force and focal adhesion assembly: a close relationship studied using elastic micropatterned substrates. Nat Cell Biol. 2001;3:466–472. [PubMed]
8. Mao Y, Schwarzbauer JE. Fibronectin fibrillogenesis, a cell-mediated matrix assembly process. Matrix Biol. 2005;24:389–399. [PubMed]
9. Baneyx G, Baugh L, Vogel V. Coexisting conformations of fibronectin in cell culture imaged using fluorescence resonance energy transfer. Proc Natl Acad Sci U S A. 2001;98:14464–14468. [PMC free article] [PubMed]
10. Bultmann H, Santas AJ, Peters DMP. Fibronectin fibrillogenesis involves the heparin II binding domain of fibronectin. J Biol Chem. 1998;273:2601–2609. [PubMed]
11. Magnusson M, Mosher DF. Fibronectin: structure, assembly, and cardiovascular implications. Arterio Thromb Vascular Biol. 1998;18:1363–1370. [PubMed]
12. Morla A, Zhang Z, Ruoslahti E. Superfibronectin is a functionally distinct form of fibronectin. Nature. 1994;367:193–196. [PubMed]
13. Sottile J, Hocking DC, Swiatek PJ. Fibronectin matrix assembly enhances adhesion-dependent cell growth. J Cell Sci. 1998;111:2933–2943. [PubMed]
14. Sechler JL, Schwarzbauer JE. Control of cell cycle progression by fibronectin matrix architecture. J Biol Chem. 1998;273:25533–25536. [PubMed]
15. Bourdoulous S, Orend G, MacKenna DA, Pasqualini R, Ruoslahti E. Fibronectin matrix regulates activation of RHO and CDC42 GTPases and cell cycle progression. J Cell Biol. 1998;143:267–276. [PMC free article] [PubMed]
16. Mercurius KO, Morla AO. Inhibition of vascular smooth muscle growth by inhibition of fibronectin matrix assembly. Circ Res. 1998;82:548–556. [PubMed]
17. Sechler JL, Schwarzbauer JE. Coordinated regulation of fibronectin fibril assembly and actin stress fiber formation. Cell Adhesion Commun. 1997;4:413–424. [PubMed]
18. Hocking DC, Sottile J, Langenbach KJ. Stimulation of integrin-mediated cell contractility by fibronectin polymerization. J Biol Chem. 2000;275:10673–10682. [PubMed]
19. Gui L, Wojciechowski K, Gildner CD, Nedelkovska H, Hocking DC. Identification of the heparin-binding determinants within fibronectin repeat III1: role in cell spreading and growth. J Biol Chem. 2006;281:34816–34825. [PubMed]
20. Sottile J, Hocking DC, Langenbach KJ. Fibronectin matrix assembly stimulates cell growth by RGD-dependent and -independent mechanisms. J Cell Sci. 2000;113:4287–4299. [PubMed]
21. Hocking DC, Chang CH. Fibronectin polymerization regulates small airway epithelial cell migration. Am J Physiol Lung Cell Mol Physiol. 2003;285:L169–L179. [PubMed]
22. Sottile J, Hocking DC. Fibronectin polymerization regulates the composition and stability of extracellular matrix fibrils and cell-matrix adhesions. Mol Biol Cell. 2002;13:3546–3559. [PMC free article] [PubMed]
23. Velling T, Risteli J, Wennerberg K, Mosher DF, Johansson S. Polymerization of type I and III collagens is dependent on fibronectin and enhanced by integrins alpha 11 beta 1 and alpha 2 beta 1. J Biol Chem. 2002;277:37377–37381. [PubMed]
24. Pereira M, Rybarczyk BJ, Odrljin TM, Hocking DC, Sottile J, Simpson-Haidaris PJ. The incorporation of fibrinogen into extracellular matrix is dependent on active assembly of a fibronectin matrix. J Cell Sci. 2002;115:609–617. [PubMed]
25. Sabatier L, Chen D, Fagotto-Kaufmann C, Hubmacher D, McKee MD, Annis DS, et al. Fibrillin assembly requires fibronectin. Mol Biol Cell. 2009;20:846–858. [PMC free article] [PubMed]
26. Chung CY, Zardi L, Erickson HP. Binding of tenascin-C to soluble fibronectin and matrix fibrils. J Biol Chem. 1995;270:29012–29017. [PubMed]
27. Zhou X, Rowe RG, Hiraoka N, George JP, Wirtz D, Mosher DF, et al. Fibronectin fibrillogenesis regulates three-dimensional neovessel formation. Genes Dev. 2008;22:1231–1243. [PMC free article] [PubMed]
28. Hocking DC, Sottile JS, Reho T, Fassler R, McKeown-Longo PJ. Inhibition of fibronectin matrix assembly by the heparin-binding domain of vitronectin. J Biol Chem. 1999;274:27257–27264. [PubMed]
29. Hynes RO. Fibronectins. New York: Springer-Verlag; 1990.
30. Roberts CR. Is asthma a fibrotic disease? Chest. 1995;107:111S–117S. [PubMed]
31. Stenman S, von Smitten K, Vaheri A. Fibronectin and atherosclerosis. Acta Medica Scandinavia (Supplement) 1980;642:165–170. [PubMed]
32. Hocking DC, Kowalski K. A cryptic fragment from fibronectin’s III-1 module localizes to lipid rafts and stimulates cell growth and contractility. J Cell Biol. 2002;158:175–184. [PMC free article] [PubMed]
33. Hocking DC, Titus PA, Sumagin R, Sarelius IH. Extracellular matrix fibronectin mechanically couples skeletal muscle contraction with local vasodilation. Circ Res. 2008;102:372–379. [PubMed]
34. Hocking DC, Sottile J, McKeown-Longo PJ. Fibronectin’s III-1 module contains a conformation-dependent binding site for the amino-terminal region of fibronectin. J Biol Chem. 1994;269:19183–19191. [PubMed]
35. Briknarova K, Akerman ME, Hoyt DW, Ruoslahti E, Ely KR. Anastellin, an FN3 fragment with fibronectin polymerization activity, resembles amyloid fibril precursors. J Mol Biol. 2003;332:205–215. [PubMed]
36. Zhong C, Chrzanowska-Wodnicka M, Brown J, Shaub A, Belkin AM, Burridge K. Rho-mediated contractility exposes a cryptic site in fibronectin and induces fibronectin matrix assembly. J Cell Biol. 1998;141:539–551. [PMC free article] [PubMed]
37. Miekka SI, Ingham KC, Menache D. Rapid methods for isolation of human plasma fibronectin. Thromb Res. 1982;27:1–14. [PubMed]
38. Windsor LJ, Havemose-Poulson A, Yamada S, Lyons JG, Birkedal-Hansen B, Stetler-Stevenson WG, et al. Matrix metalloproteinases. New York, NY: Wiley & Sons, Inc; 2002. pp. 10.8.6–10.8.7.
39. Wojciechowski K, Chang CH, Hocking DC. Expression, production, and characterization of full-length vitronectin in Escherichia coli. Protein Expr Purif. 2004;36:131–138. [PubMed]
40. Dufour S, Gutman A, Bois F, Lamb N, Thiery JP, Kornblihtt AR. Generation of full-length cDNA recombinant vectors for the transient expression of human fibronectin in mammalian cell lines. Exp Cell Res. 1991;193:331–338. [PubMed]
41. Hocking DC, Sottile J, McKeown-Longo PJ. Activation of distinct α5β1-mediated signaling pathways by fibronectin’s cell adhesion and matrix assembly domains. J Cell Biol. 1998;141:241–253. [PMC free article] [PubMed]
42. Pierschbacher M, Ruoslahti E. Variants of the cell recognition site of fibronectin that retain attachment-promoting activity. Proc Natl Acad Sci USA. 1984;81:5985–5988. [PMC free article] [PubMed]
43. Aota S, Nomizu M, Yamada KM. The short amino acid sequence Pro-His-Ser-Arg-Asn in human fibronectin enhances cell-adhesive function. J Biol Chem. 1994;269:24756–24761. [PubMed]
44. Main AL, Harvey TS, Baron M, Boyd J, Campbell ID. The three-dimensional structure of the tenth type III module of fibronectin: an insight into RGD-mediated interactions. Cell. 1992;71:671–678. [PubMed]
45. Grinnell F, Lamke C. Reorganization of hydrated collagen lattices by human skin fibroblasts. J Cell Sci. 1984;66:51–63. [PubMed]
46. Garcia AJ, Schwarzbauer JE, Boettiger D. Distinct activation states of alpha5 beta1 integrin show differential binding to RGD and synergy domains of fibronectin. Biochemistry. 2002;41:9063–9069. [PubMed]
47. Ruoslahti E. RGD and other recognition sequences for integrins. Annu Rev Cell Dev Biol. 1996;12:697–715. [PubMed]
48. Aota S, Nagai T, Yamada KM. Characterization of regions of fibronectin besides the arginine-glycine-aspartic acid sequence required for adhesive function of the cell-binding domain using site-directed mutagenesis. J Biol Chem. 1991;266:15938–15943. [PubMed]
49. Litvinovich SV, Novokhatny VV, Brew SA, Ingham KC. Reversible unfolding of an isolated heparin and DNA binding fragment, the first type III module from fibronectin. Biochim Biophys Acta. 1992;1119:57–62. [PubMed]
50. Mercurius KO, Morla AO. Cell adhesion and signaling on the fibronectin 1st type III repeat; requisite roles for cell surface proteoglycans and integrins. BMC Cell Biol. 2001;2:18. [PMC free article] [PubMed]
51. Bloom L, Calabro V. FN3: a new protein scaffold reaches the clinic. Drug Discov Today. 2009;14:949–955. [PubMed]
52. Litvinovich SV, Ingham KC. Interactions between type III domains in the 110 kDa cell-binding fragment of fibronectin. J Mol Biol. 1995;248:611–626. [PubMed]
53. Siggers K, Soto C, Palmer AG., 3rd Conformational dynamics in loop swap mutants of homologous fibronectin type III domains. Biophys J. 2007;93:2447–2456. [PMC free article] [PubMed]
54. Billings KS, Best RB, Rutherford TJ, Clarke J. Crosstalk between the protein surface and hydrophobic core in a core-swapped fibronectin type III domain. J Mol Biol. 2008;375:560–571. [PMC free article] [PubMed]
55. Koide A, Bailey CW, Huang X, Koide S. The fibronectin type III domain as a scaffold for novel binding proteins. J Mol Biol. 1998;284:1141–1151. [PubMed]
PubReader format: click here to try

Formats:

Related citations in PubMed

See reviews...See all...

Cited by other articles in PMC

See all...

Links

Recent Activity

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

See more...