Logo of bmcgenoBioMed Centralsearchsubmit a manuscriptregisterthis articleBMC Genomics
BMC Genomics. 2011; 12: 4.
Published online Jan 4, 2011. doi:  10.1186/1471-2164-12-4
PMCID: PMC3023751

Construction and application for QTL analysis of a Restriction Site Associated DNA (RAD) linkage map in barley

Abstract

Background

Linkage maps are an integral resource for dissection of complex genetic traits in plant and animal species. Canonical map construction follows a well-established workflow: an initial discovery phase where genetic markers are mined from a small pool of individuals, followed by genotyping of selected mapping populations using sets of marker panels. A newly developed sequence-based marker technology, Restriction site Associated DNA (RAD), enables synchronous single nucleotide polymorphism (SNP) marker discovery and genotyping using massively parallel sequencing. The objective of this research was to assess the utility of RAD markers for linkage map construction, employing barley as a model system. Using the published high density EST-based SNP map in the Oregon Wolfe Barley (OWB) mapping population as a reference, we created a RAD map using a limited set of prior markers to establish linakge group identity, integrated the RAD and prior data, and used both maps for detection of quantitative trait loci (QTL).

Results

Using the RAD protocol in tandem with the Illumina sequence by synthesis platform, a total of 530 SNP markers were identified from initial scans of the OWB parental inbred lines - the "dominant" and "recessive" marker stocks - and scored in a 93 member doubled haploid (DH) mapping population. RAD sequence data from the structured population was converted into allele genotypes from which a genetic map was constructed. The assembled RAD-only map consists of 445 markers with an average interval length of 5 cM, while an integrated map includes 463 RAD loci and 2383 prior markers. Sequenced RAD markers are distributed across all seven chromosomes, with polymorphic loci emanating from both coding and noncoding regions in the Hordeum genome. Total map lengths are comparable and the order of common markers is identical in both maps. The same large-effect QTL for reproductive fitness traits were detected with both maps and the majority of these QTL were coincident with a dwarfing gene (ZEO) and the VRS1 gene, which determines the two-row and six-row germplasm groups of barley.

Conclusions

We demonstrate how sequenced RAD markers can be leveraged to produce high quality linkage maps for detection of single gene loci and QTLs. By combining SNP discovery and genotyping into parallel sequencing events, RAD markers should be a useful molecular breeding tool for a range of crop species. Expected improvements in cost and throughput of second and third-generation sequencing technologies will enable more powerful applications of the sequenced RAD marker system, including improvements in de novo genome assembly, development of ultra-high density genetic maps and association mapping.

Background

Plant breeders and geneticists have benefited from the availability of tools for the rapid and cost-effective development of molecular marker-based linkage maps. As predicted by Tanksley et al. [1], linkage maps have proven to be useful for discovering, dissecting and manipulating the genes that determine simple and complex traits in crop plants. Barley (Hordeum vulgare) is a model for plant breeding and genetics because it is diploid (2n = 2x = 14) and has a long history of genetics research. Over the past decade, increasingly dense maps of the barley genome have been constructed using multiple populations and many types of molecular markers [2]. Most recently, Szűcs et al. [3] reported an integrated 2383-locus linkage map developed in the Oregon Wolfe Barley (OWB) mapping population based on representative early generation markers (e.g. morphological loci, RFLPs, and SSRs) and single nucleotide polymorphisms (SNPs).

SNP markers have become increasingly important tools for molecular genetic analysis, as single base-pair changes are the most abundant small-scale genetic variation present between related sequences of DNA [4]. To date, most SNP development efforts in larger, more complex genomes such as barley have focused on "complexity reduction" techniques that aim to sequence a fraction of the genome, such as that represented in EST collections. Once a panel of markers is established from initial SNP discovery, samples from a selected population are then genotyped using oligo-extension or array-based platforms [5]. Both these strategies were used for construction of the current barley SNP-based maps [3,6,7].

The emergence of massively-parallel, next-generation sequencing (NGS) platforms capable of producing millions of short (50-100 bp) DNA sequence reads has reduced the costs of DNA sequencing and offers the tantalizing possibility of making direct, genotyping-by-sequencing (GBS) practical (Reviewed in [8]). Recently, Huang and colleagues [9] have elegantly demonstrated how genotyping using NGS data can facilitate the rapid development of linkage maps in domesticated rice, Oryza sativa. Despite the attractiveness of this approach and availability of next-generation sequencing platforms, at present, GBS methods retain significant limitations. First, current protocols for synthesis of DNA fragment libraries compatible with high-throughput sequencing platforms are laborious, costly and would be impractical for production efforts involving hundreds of samples [10]. Second, sequence-based genotyping is restricted to those species with available, high-quality, pseudomolecule-sized genome assemblies [9]. While many key economic and scientifically meritorious species will undoubtedly be sequenced as a direct result of the ongoing revolution in NGS technologies, what is required are marker platforms that can provide GBS independent of the status of an assembled genome.

Restriction-site Associated DNA (RAD) markers detect genetic variation adjacent to restriction enzyme cleavage sites across a target genome [11]. The first iteration of RAD markers facilitated cloning of mutants isolated from genetic screens in classic model systems [12,13]. More recent efforts have focused on adapting the RAD technique for use in NGS platforms, specifically the Illumina sequencing-by-synthesis method, to enable individual sequence based genotyping of samples [14]. The sequenced RAD marker system enjoys two favourable characteristics for high-throughput GBS. As previously mentioned, the RAD method uses restriction enzymes as a complexity reduction strategy to reduce the sequenced portion of the genome anywhere from 0.01% to 10% [15]. Furthermore, RAD protocols facilitate the creation of highly multiplexed NGS sequencing formulations containing many tens of samples in a single library, thereby reducing library preparation costs [14]. While previously published RAD studies have explored NGS of limited numbers of individuals or bulked genotyping of pooled populations, the objective of this research was to determine the feasibility of constructing a RAD marker genetic map in barley. We used the OWB population as a mapping resource in order to directly compare RAD and EST-based SNP maps and to assess the quality and utility of a linkage map built with the two types of data.

Results & Discussion

Genome Analyzer sequence results, SNP Discovery and DH Genotyping

A total of 2,010,583 36-bp sequence reads were obtained for the OWB dominant and recessive inbred genetic stocks (parents of the OWB mapping population), while 27,704,592 sequence reads were obtained for the 93 member DH mapping population (Additional file 1: Table S1). Illumina sequences from the OWB parental lines were first used for identification of SNPs. Putative alleles were mined from the sequence data using several custom PerlScripts and filtering procedures. First, raw 36-bp Illumina sequence reads were partitioned into discrete files using a 5' multiplex identifier (MID) corresponding to each OWB sample and the restriction enzyme site SbfI (TGCAGG). Segregated data from each line was then collapsed into putative RAD sequence clusters comprised of a minimum of eight (8×) redundant sequence reads per locus. Sequences not attaining the 8× sequence coverage threshold were excluded from further analysis, as were putative high-copy RAD sequences where the number of sequence occurrences in each cluster was greater than 500 (500×). Homologous RAD clusters from the dominant and recessive lines were then compared using a custom k-mer matching algorithm permitting exact sequence matches (monomorphic loci), single mismatch (one SNP per read) and two nucleotide mismatches (two SNPs per read) per 28 bp sequence. An initial panel of 530 SNPs with fixed genotypes in both parents were identified using these criteria and alleles for each marker were assigned to their respective parental donor (Additional file 2: Table S2).

The putative 530 SNP marker panel was then used to score RAD sequences obtained from each of the DH individuals. As alleles are fixed within each member of the doubled haploid OWB population, we posited sequence genotypes could be accurately determined at low sequence coverage (<5×) [16]. To further minimize genotyping miscalls due to possible sequencing errors, a minimum of two independent sequence reads were required over any locus to assign any SNP genotype. Putative genotypes developed for individual samples were converted into JoinMap 4 [17] compatible format using custom PerlScript. Loci lacking sufficient sequence coverage or with conflicting genotype data were coded as missing data.

Linkage map

We used the following criteria to assess the quality of the RAD markers for linkage map construction. First, with the RAD-only map we considered the (i) total number of loci detected, (ii) the percentage of polymorphic loci, (iii) the number of missing allele calls for polymorphic loci, (iv) the percentage of codominant loci, (v) segregation distortion, (vi) the number of significant singletons (vii) linkage map length, and (viii) the number, location, interaction and effect of significant QTL. For purposes of comparison, we used the map reported by Szűcs et al. [3]. Subsequently, we added the RAD data to the 2383 locus map and assessed criteria v - vii, above. For criteria viii, however, we used a skeleton map, as described in the Methods. First, we will present results in terms of criteria i - vii; the QTL results will be presented separately.

Of approximately 10,000 RAD sequence clusters interrogated, 530 loci (5.3%) were classified as codominant markers where two distinct alleles were explicitly observed between the OWB parents. A number of dominant-style markers, which are sequences present in one parent but not the other, were also observed within the data but were not used for map construction as dominant markers have reduced genotyping quality. Of the codominant RAD marker class, 67 (13%) were excluded from further analysis due to missing data (≥ 15% missing data points). This left 463 (4.6% of the total) RAD loci, plus the nine morphological markers, for map construction. Twenty-seven RAD markers remained unlinked at LOD 5.0 and the remaining 436 formed seven linkage groups, together with the nine morphological markers. Based on visual assessment of locus orders, there were 22 loci showing apparent double crossover events. Of these, 23 singletons data points were re-coded as missing data for 20 loci where these occurred, except for two loci where distances between flanking markers were large enough to expect recombination. The final map is composed of 436 RAD and nine morphological markers. The total length of the RAD map is 1260 cM. Excluding co-segregating markers, the average marker density is 5 cM (Additional file 3: Figure S1). Significant segregation distortion was observed on chromosomes 2H, 3H, 6H, and 7H (Figure (Figure1).1). On chromosomes 2H and 3H the segregation distortion was in favor of the OWB recessive parent allele and on chromosomes 6H and 7H it was in favor of the OWB dominant parent allele. The lengths (in Haldane cM) for each linkage group are shown in Table Table11.

Table 1
Summary of chromosome length in three linkage maps.
Figure 1
Segregation distortion on chromosome 2H linkage maps in the Oregon Wolfe Barley mapping population. The results of mapping with two different data sets are shown in A) the OWB-2383 map + 463 RAD loci, B) the 436 RAD and morphological marker loci and C) ...

For construction of the RAD + 2383 locus map, the same 463 RADs selected initially for the RAD-only map were added to the 2383-locus data set reported by Szűcs et al. [3]. The 23 singletons were replaced by missing values. The combined map therefore consists of 2846 loci and has a total length of 1286 cM (Table (Table1).1). Marker orders for the non-RAD markers are consistent between the 2383 and 2846-locus maps. Seventy-eight percent (359) of the RAD markers co-segregate with one or more of the previous markers. There were examples of gap-filling: for example, FGX_OWB00091, mapped to a 17 cM gap on chromosome 7H in the Szűcs et al. [3] and incorporation of this marker reduced the distance between the two flanking markers to 10 cM. Segregation distortion was observed at the same positions as in the RAD-only map (Figure (Figure1).1). The lengths (in Haldane cM) for each linkage group are shown in Table Table1.1. The same lines identified as identical with the RAD-only data (see Methods, Plant material) were confirmed as identical using the 2383 data points reported by Szűcs et al. [3].

Although a significant number of RAD loci were eliminated based on lack of polymorphism and missing sequence data, the genome scan uncovered over 400 high quality loci that were available for map construction. By way of comparison, there are 722 DArT loci on the Szűcs et al. OWB map [3], out of the 1,500 loci that were genotyped. The RAD loci are codominant whereas DArTs are dominant markers [18]. In the case of dominant markers, missing data due to error vs. allele absence cannot be distinguished, and this leads to a higher frequency of apparent singletons in map construction. The high quality of the RAD data is further confirmed by the comparable linkage map lengths for the RAD only, RAD + prior marker, and Szűcs et al. OWB map [3](Table ](Table1).1). Segregation distortion was observed in all maps at the equivalent positions confirming that this was due to non-random distribution of alleles to haploid progeny and not to scoring errors. The pronounced segregation distortion on 2H is attributable to the ZEO locus, with selection against the "dwarfing" alleles of the dominant parent.

The presence of duplicate sets of lines in the OWB population provides an additional test for data quality. The members of each set were not identified as identical in previous iterations of the map (e.g. Costa et al. [19]) due to differences at loci that have been progressively removed from the data set based on quality control criteria. The lines within each subset are identical for the Illumina SNPs and all other loci included in the Szűcs et al. OWB map [3]. That the lines within each set are also identical for all RADs confirms the repeatability of the RAD genotyping assay and that the lines are identical. The most likely explanation for the presence of these identical sets of lines in the population is that multiple haploids were inadvertently advanced from callus regenerated from a single embryo. Removal of the sets of identical lines reduces the mapping population size from 93 to 82. There are no differences in locus order between the n = 93 and n = 82 maps and map lengths are comparable [20].

EST and genome mapping of RAD sequence markers

The RAD technique develops sequence from regions adjacent to restriction endonuclease digestion sites in a target genome [14]. To establish if sequence-based RAD markers from the OWB genetic map would anchor to existing Hordeum genomic resources, we used the short-read aligner Bowtie to map RAD sequences onto a barley gene index [21,22]. Using this database, we successfully identified unique alignment positions for 51 of 436 sequenced RAD loci (11.0%). An additional 22 RAD loci (4.7%) mapped to multiple positions in the gene index. A list of summary alignments for all RAD markers in this database can be found in additional file 4: Table S4. Although the gene index contains approximately 54 Mb of putative coding sequence distributed across 80,723 tentative assemblies, this database spans only a small fraction (~0.1%) of the 5.0 Gb barley haploid genome. As Ty3 and Copia retrotransposon families are believed to inhabit a large portion of the barley genome, we postulated some percentage of RAD sequences might originate from repetitive-class sequences [23]. However, several attempts to align the 463 RAD sequence loci to the 1.3 Mb TIGR Hordeum repeat database under a variety of thresholds did not reveal any successful alignments. A larger percentage of RAD sequences could be positioned on candidate genes than would expected by random sampling, suggesting that RAD markers are significantly enriched in the gene space. The absence of any alignments to known repetitive sequences also hints that RAD markers are clustered within recombinatorially active regions of the genome.

Comparative Genome Analysis

To examine if assembled grass genomes would serve to anchor other RAD markers, we aligned polymorphic sequences to the 430 Mb Oryza sativa and 300 Mb Brachypodium distachyon genomes using a modified CIP/CALC method [24-26]. Bowtie alignment results using relaxed parameters indicate that only 16 and 24 of the 463 OWB RAD sequences mapped to either the rice or Brachypodium chromosome assemblies, respectively. Despite the small number of orthologous RAD sequences and the short Illumina read of 28 bp, alignments of RAD markers ordered by the genetic map against the finished Brachypodium genome (Figure (Figure22 and additional file 5: Figure S5) agree with macro-scale syntenic relationships established by previous efforts [25]. Although this study has relatively few sequence loci available for comparison, our findings suggest that a denser RAD marker scan, using a more frequently cutting restriction enzyme would interrogate more genome sequence and interrogate more sequence for comparative analyses.

Figure 2
Macro-scale syntenic relationships between barley and Brachypodium revealed with sequenced RAD markers. RAD sequences anchored by linkage analysis are distributed across the seven Hordeum linkage groups. Alignments to orthologous sequence loci in Brachypodium ...

Overall, we were able to assign 74 of 463 RAD sequence loci (15.9%) to at least one of the three sequence references, leaving the genomic origin of the remaining barley RAD tags (389 loci, 84.1%) unknown. We postulate the large numbers of RAD sequences placed on the OWB linkage without homology or orthology to known sequences are a result of two factors. First, the lack of a contiguous barley genome, which would allow us to explicitly determine the location of all RAD sequences, restricts our analysis to the small fraction of the haploid genome that has been sequenced. Second, despite established syntenic relationships between the Oryza, Hordeum and Brachypodium genomes, the inefficient mapping of barley sequenced RAD markers across species is likely a result of the majority of RAD loci emanating from areas of the barley genome which have significantly diverged at the nucleotide level since the speciation of the Poaceae [27,28].

A cohesive explanation for the results observed in the genetic map and comparative genome analysis is that the majority of RAD loci are linked with, but lie outside gene sequences. In this study, although only 11.0% of RAD sequences align to known barley genes, we report 78% of RAD markers show co-segregation with unigene-EST SNP markers from the Szűcs, et al. OWB map [3]. The observed association of RAD markers with known genic-SNPs indicates they are genetically linked, suggesting some physical proximity, though the distances may be on the order of megabases. Additionally, the relative paucity of RAD markers that align to barley genes or other plant genomes indicates that only a small fraction of RAD markers originate from within coding or other conserved sequences. RAD marker development efforts from other grass species for which there is a reference genome show similar distributions of markers across coding and intergenic space [29]. When a complete barley genome sequence is available, the sequence identity and location of RAD loci will become clear. In the interim, the current availability of all barley RAD sequences is an advantage over DArTs, where only limited sequence data are publicly available.

QTL mapping

One of the principal applications of linkage maps to crop improvement has been QTL mapping in bi-parental crosses [2]. A principal problem with many QTL mapping efforts is the limited size of the mapping population [30-33]. Recognizing that the small size of the OWB population (n = 93 and n = 82 when removing identical lines) will lead to biased estimates of QTL significance, effect, and interaction [34-37], we nonetheless proceeded with a QTL analysis of the eight traits, due to the high heritabilities (Table (Table22 and Table Table3)3) and our interest in addressing two issues. The OWB population is a widely-used resource for genetic analysis and instruction: reporting the relationships of QTLs with the morphological and phenological characters segregating in the population will further develop this community resource. The RAD markers added to the map reported by Szűcs et al. [3] represent very high quality and novel data and we were interested in determining if their addition would fill gaps in the previous map and thus allow for higher resolution QTL detection.

Table 2
Summary of QTL based on a skeleton map derived from the 2846 loci data set.
Table 3
Summary of QTL based on RAD-only map constructed with 436 RAD and nine morphological loci.

As shown in Table Table2,2, a total of 26 QTLs were found using the higher density map, with a range of one to five QTL for each individual trait. Twenty-six QTLs were also detected with the RAD-only map with a range of two to five QTL for each trait (Table (Table3).3). Twenty-three QTLs were significant and detected in both maps. Of the three QTL that were significant in the full map, but not the RAD-only map, all showed a trend in the RAD-only map but did not reach the LOD threshold. Three QTL significant in the RAD-only map but not in the full map showed a trend in the full map but did not reach the LOD threshold. Therefore, RADs alone, or in combination with other markers, are suitable for QTL mapping. This supports the quality of the RAD data, since a key issue for QTL detection is marker quality, given adequate genome coverage [37].

The following results highlight findings from the higher density skeleton map (Table (Table2),2), based on the assumption that by providing the most thorough coverage it optimizes QTL estimates. However, the same large-effect QTL were detected with the RAD-only map (Table (Table3).3). As shown in Table Table2,2, eleven of the twenty-six QTL were associated with four genes: ZEO-1, VRS-1, VRN-H1 and VRN-H2, and the largest effect QTL for all traits were associated with ZEO-1and/or VRS-1. The favorable alleles for height, spike length, grain number and grain yield came from the OWB recessive parent (normal height, long spike, and six-row) at ZEO-1. The OWB recessive parent also contributed favorable alleles for floret and grain number at VRS-1. At this locus, the OWB dominant parent (dwarf height, short spike, and two-row) contributed favorable alleles for spike number and hundred grain weight. Although VRS-1 and ZEO-1 were both coincident with yield component QTL, only ZEO-1 had a significant effect on grain yield. This is probably due to yield component compensation associated with VRS-1 and negative pleiotropic effects of the ZEO-1 dwarf allele. This extreme dwarfing allele will not be as immediately useful to agriculture as the Rth-B1 and Rht-D1 genes of wheat [38]. Interestingly, QTLs for final leaf number were coincident with VRN-H1 and VRN-H2. These two genes interact epistatically to determine vernalization sensitivity [39]. The OWB dominant and recessive parents, respectively, have dominant (winter) and spring (recessive) alleles at VRN-H2 allele. Therefore, it is of interest that the OWB dominant allele at VRN-H2 is associated with higher final leaf number, even though there is no binding site in Vrn-H1 for the repressor encoded by VRN-H2 since both parents have the same recessive (spring) allele at VRN-H1 [40]. The higher final leaf number QTL allele coincident with VRN-H1 may be a consequence of regulation of other regions in VRN-H1 besides VRN-H2. There were epistatic QTL interactions for spike length, and grain number but these effects were very small in comparison to the main effects. The QTL we report for the OWB population can be aligned with QTL for other traits assessed in other germplasm via the GrainGenes QTL summary http://wheat.pw.usda.gov/ggpages/maps/OWB/.

Conclusions

In this study we showed that sequenced RAD markers were sufficient to generate a high quality linkage map comparable to current OWB SNP-based maps. The success of linkage map construction supports the reliability of the sequenced RAD markers based on the following criteria i) a small number of singletons ii) consistency with non-RAD marker order iii) segregation distortion between maps in equivalent positions iv) comparable genome coverage and v) comparable map lengths. Construction of this linkage map could serve as a bridge to allow identification of loci associated with traits of interest, thus facilitating gene discovery and manipulation. The consistency of QTL results between RAD and RAD + prior marker maps confirms that sequenced RAD markers will be useful for developing genetic maps and QTL tagging. Therefore, sequenced RAD markers can contribute to the enrichment of molecular marker resources and have useful applications in molecular breeding.

Ongoing optimization of the RAD marker system will foster more sophisticated analysis in future studies. Selection of nucleases that generate more markers will allow higher density linkage maps to be constructed, while improvements in sequencing chemistries and fragment preparation protocols will permit longer read lengths for comparative genome analysis. Additionally, sequenced RAD markers arrayed in genetic maps would be of significant benefit as a scaffold framework for placement of shotgun sequence reads and de novo genome assembly refinement.

Methods

Plant material

The mapping population consists of 93 doubled haploid (DH) lines. The DH lines were produced from the F1 of the cross of the Wolfe recessive and dominant marker stocks using the Hordeum bulbosum method [19]. In the course of this research we determined that nine sets of DH lines had identical genotypes. Specifically, the following sets of lines are identical: set1 = DH 1,4,27,62; set2 = DH 16,71; set3 = DH 5,18; set4 = DH 31,58; set5 = 35,50; set6 = DH 15, 47 set7 = DH 61, 88; set8 = DH 22,70; set9 = DH 80,77. Retention of one genotype per set (DH 4, 16, 18, 31, 35, 47, 61, 70 and 77) reduces the population size to 82. This report describes mapping and QTL analysis using the OWB population of 82 lines. In order to ascertain the bias introduced by duplicate lines (an unintended consequence of the DH production process), all analyses were also conducted with a population size of n = 93 [20]. Genomic DNA was extracted from young leaf tissue of a single plant representing each DH line, and each of the parents, using DNeasy plant maxi kits (QIAGEN Inc. California, USA).

RAD protocols

OWB genomic DNA from the selected mapping population was digested with the restriction endonuclease SbfI and processed into RAD libraries similarly to the method of Baird et al. [14]. Briefly, P0 (parental genotypes) and DH (progeny) genomic DNA (~300 ng; from each sample) was digested for 60 min at 37°C in a 50 μL reaction with 20 units (U) of SbfI (New England Biolabs [NEB]). Samples were heat-inactivated for 20 min at 65°C. 2.0 μL of 100 nM P1 Adapter(s), a modified Solexa© adapter (2006 Illumina, Inc., all rights reserved). SbfI P1 adapters each contained a unique multiplex sequence index (barcode) which is read during the first four nucleotides of the Illumina sequence read. 100 P1 nM adaptor were added to each sample along with 1 μL of 10 mM rATP (Promega), 1 μL 10× NEB Buffer 4, 1.0 μL (1000 U) T4 DNA Ligase (high concentration, Enzymatics, Inc), 5 μL H2O and incubated at room temperature (RT) for 20 min. Samples were again heat-inactivated for 20 min at 65°C, pooled and randomly sheared with a Bioruptor (Diagenode) to an average size of 500 bp. Samples were then run out on a 1.5% agarose (Sigma), 0.5× TBE gel and DNA 300 bp to 700 bp was isolated using a MinElute Gel Extraction Kit (Qiagen). End blunting enzymes (Enzymatics, Inc) were then used to polish the ends of the DNA. Samples were then purified using a Minelute column (Qiagen) and 15 U of Klenow exo- (Enzymatics) was used to add adenine (Fermentas) overhangs on the 3' end of the DNA at 37°C. After subsequent purification, 1 μL of 10 μM P2 adapter, a divergent modified Solexa© adapter (2006 Illumina, Inc., all rights reserved), was ligated to the obtained DNA fragments at 18°C. Samples were again purified and eluted in 50 μL. The eluate was quantified using a Qubit fluorimeter and 20 ng of this product was used in a PCR amplification with 20 μL Phusion Master Mix (NEB), 5 μL of 10 μM modified Solexa© Amplification primer mix (2006 Illumina, Inc., all rights reserved) and up to 100 μL H2O. Phusion PCR settings followed product guidelines (NEB) for a total of 18 cycles. Samples were gel purified, excising DNA 300-650 bp, and diluted to 1 nM.

To promote SNP identification in low-copy, gene-rich regions of the barley genome, a species with ~90% retroelement content, selection of a restriction enzyme that does not fragment repetitive-class DNA is desirable. Previous studies have documented epigenetic modification of CpG, CpNpG and CpNpN nucleotides with 5-methylcytosine (5 mC) in retroelement-dense regions of many plant genomes, including triticale [41-43]. Methylation-sensitive type II restriction endonucleases, which do not cleave 5 mC-modified DNA, can be used to specifically sample the hypomethylated genomic fraction and are commonly used in other restriction-enzyme based genetic marker systems [44]. We selected the restriction enzyme SbfI, (5'CCTGCA/GG'3) with a recognition site containing two CpNpG trinucelotide repeats for RAD sequencing of the barley genome.

Illumina Sequencing

The constructed OWB libraries were run on an Illumina Genome Analyzer II at the University of Oregon High Throughput Sequencing Facility. Illumina/Solexa protocols were followed for single read (1 × 36 bp) sequencing chemistry. A total of 20.4 M Illumina reads were obtained from sequencing of the population. Sequences are available at the Sequence Read Archive http://www.ncbi.nlm.nih.gov/Traces/sra/, at accession SRA020593.

Sequence Analysis and SNP Discovery and Genotyping

Internal Floragenex sequence tools and custom PerlScripts were used for processing of raw Illumina/Solexa data. Data from multiple Illumina/Solexa sequence channels was segregated by the appropriate four nucleotide multiplex identifier (MID) assigned to each sample. All reads were trimmed to 28 nucleotides from the 3' end of genomic sequence to avoid using bases with a high Illumina sequence error rate.

Sequence Alignment and Comparative Genomics

The short-read alignment program Bowtie [21] was used for mapping of polymorphic barley RAD sequence loci (Additional file 4: Table S4) to the comprehensive Hordeum gene index (HvGI v10.2) database from the Dana-Farber Cancer Institute [22]. Both tentative consensus (TC) and singleton expressed sequence tags (ESTs) were used in analysis. Briefly, sequences corresponding to all 530 polymorphic RAD loci were aligned against the HvGI assembly. Two criteria were imposed for sequence mapping. First, a maximum of three nucleotide mismatches and no gaps between the RAD sequence and reference were permitted for any alignment. Second, each sequence had to anchor to a single unique position to be scored. For macro-scale syntenic mapping of barley RAD sequences to other grass genomes, we extended the CIP/CALP (Conserved Identity Percentage/Conserved Alignment Percentage) method previously used in Triticale comparative analysis [26]. 30 bp RAD sequences ordered by the linkage map were aligned against the Oryza sativa and Brachypodium distachion chromosome assemblies using relaxed Bowtie alignment parameters. Bowtie is able to tolerate up to three nucleotide mismatches between query and reference, translating to minimum values of 90% and 90% respectively for CIP and CALP.

Linkage mapping

Two linkage maps were constructed. The first map was built with only the RAD data and data for nine morphological markers (Table (Table4).4). The morphological marker data were reported by Szűcs et al. [3] and were included because they provide anchors for equating linkage groups with six of the seven barley chromosomes. A second map was built using RAD data and all 2383 data points reported by Szűcs et al. [3]. Each linkage map was constructed using JoinMap 4 [17]. Linkage groups were identified using minimum LOD values of 5. The Monte Carlo Maximum Likelihood (ML) mapping algorithm was used to determine the orders of markers within each linkage group. Map distances were calculated using the Haldane's mapping function. Maps were drawn using MapChart v2.2 [45]. Data used for linkage map construction are available at Oregon Wolfe Barley Data and GrainGenes Tools http://wheat.pw.usda.gov/ggpages/maps/OWB/.

Table 4
Anchor markers for RAD-only map construction.

Phenotyping

In order to assess the utility of the RAD and RAD + SNP map for quantitative trait locus (QTL) detection, data on phenological and reproductive fitness phenotypes were obtained for the 93 DH lines and the two parents. Individual plants were grown in 13.5 cm pots at the Oregon State University greenhouses (Corvallis, Oregon USA). Supplemental light was used to maintain a 16 h light/24 h photoperiod. Temperatures were maintained at a constant 18 ± 2°C day and night temperature. Each DH and parental line was replicated twice. Eight traits were measured on each plant. The trait abbreviations and definitions are as follows: (1) Final leaf number (FLN) was recorded as the total number of leaves on the main stem of each plant; (2) Plant height (PH) was measured as the distance (in cm) from the soil surface to the tip of the tallest inflorescence (spike), exclusive of awns, if present; (3) Spike number (SN) was the actual count of the total number of fertile spike on each plant. Three stems with fertile spikes were selected at random from each plant for determining the following traits, and the individual values were averaged: (4) Spike length (SL) was measured as the length (in cm) from the first rachis internode to the top of the final fully formed floret, exclusive of awn; (5) Floret number (FS) was the count of the number of florets (fertile and sterile) per spike; (6) Grain number (GN) was the count of the number of seed-containing florets per spike; (8) Hundred grain weight (HGW) was the weight (in g) of 100 grains. Grain yield per plant (GY) was estimated by the function GY = SN*GN*HGW. Phenotype data are available at Oregon Wolfe Barley Data and GrainGenes Tools http://wheat.pw.usda.gov/ggpages/maps/OWB/.

QTL analysis

QTL analyses were performed for each of the nine traits using the RAD-only and RAD + 2383 locus maps as follows: For the RAD-only map, all data included in the linkage map were used. For the RAD + 2383 locus map, a skeleton map was developed using a single marker (selected at random) for an average marker density of 2 cM and a total of 624 markers. The QTL analyses were conducted with QTL Cartographer Version 2.5 [46] using Composite Interval Mapping (CIM) [47]. Up to seven cofactors for CIM were chosen, using a forward-selection backward-elimination stepwise regression procedure with a significance threshold of 0.1. The walk speed was set to 1 cM, and the scan window to 50 cM beyond the markers flanking the interval tested. Experiment-wise significance (α = 0.05) likelihood ratio test (LR) thresholds for QTL identification were determined with 1,000 permutations, and expressed as LOD (LOD = 0.217 LR). Epistatic interactions between QTL were evaluated with the Multiple Interval Mapping (MIM) [48] method implemented in Windows QTL Cartographer using Bayesian Information Criteria (BIC-M0). Broad-sense heritability values were estimated using the following formula:

H2=σG2σG2+σe2r

where σG2 represent the genetic variance, σe2 the residual variance and r the number of replicates per genotype.

List of abbreviations

DArT: Diversity Array Technology; DH: Doubled haploid; EST: Expressed Sequence Tag; GBS: Genotyping by-sequencing; LOD: Logarithm of odds; OWB; Oregon Wolfe Barley; QTL: Quantitative Trait Locus; RAD: Restriction site Associated DNA; SNP: Single Nucleotide Polymorphism;

Competing interests

RWN is an employee of, and EJ a shareholder in, Floragenex - an organization which offers commercial RAD sequencing services. This organization is not financing the manuscript.

Authors' contributions

EAJ handled raw sequence analysis and developed PerlScripts for barley sequence genotyping. RWN drafted portions of the manuscript and performed alignments and comparative genomic analysis of the short read data. PMH drafted portions of the manuscript. AC-M drafted portions of the manuscript and performed linkage and QTL mapping analyses. CY performed linkage and QTL analyses, and assembled the final draft. LC, AC, TF assisted in generating data and provided insightful suggestions for analysis and interpretation. All authors have read and approved the final version of this manuscript.

Supplementary Material

Additional file 1:

Table S1: Oregon Wolf Barley DH Sequencing Summary. The aggregate sequence reads obtained for both parents and each member of the OWB mapping population are provided. Sequencing coverage for each sample is also calculated based on the formula (Number of SbfI genome sequences from Barley genome/raw sequences obtained). Clustering of RAD data from multiple individuals indicates there are approximately 10,000 SbfI sequences in the typical Hordeum genome.

Additional file 2:

Table S2: Oregon Wolf Barley DH RAD Marker Sequences. The sequence data for each RAD marker positioned on the genetic map is provided in this spreadsheet.

Additional file 3:

Figure S1: Linkage map of Oregon Wolfe Barley population based on RAD markers.

Additional file 4:

Table S4: Oregon Wolf Barley RAD EST/Genome Alignments. Bowtie alignments of OWB RAD markers to three sequence databases are provided: The Hordeum gene index (HvGI v10.2) from the Dana-Farber Cancer Institute, the MSU Rice Genome Annotation Project Release 6.0 (January 30, 2009) and the 8× Brachypodium Genome Assembly from brachypodium.org. The table columns detail, from left to right: the OWB marker name, sequence alignment orientation, the name (either EST/contig/chromosome identifier) and position (in bp) of the sequence alignment within the reference assembly, the sequence of the RAD marker and any variations observed between query (RAD marker) and reference. Variations are reported as: position in read, reference allele and query allele.

Additional file 5:

Table S5: Syntenic Oregon Wolf Barley/Brachypodium RAD Marker Sequences. Bowtie alignments of OWB RAD markers to the 8× Brachypodium Genome Assembly from brachypodium.org are shown. OWB RAD markers have been ordered by linkage group and map position. The corresponding alignment positions for each marker on the Bd21 assembly are shown in columns at right, with chromosome, alignment position, sequence and observed sequence variation between Brachypodium and OWB RAD markers.

Acknowledgements

The authors wish to thank Jason Boone, Tressa Atwood and Jenna Gribbin for their insights and critical review of this manuscript.

References

  • Tanksley SD, Ganal MW, Prince JP, de-Vicente MC, Bonierbale MW, Broun P, Fulton TM, Giovannoni JJ, Grandillo S, Martin GB, Messeguer R, Miller JC, Miller L, Paterson AH, Pineda O, Roder MS, Wing RA, Wu W, Young ND. High density molecular linkage maps of the tomato and potato genomes. Genetics. 1992;132(4):1141–1160. [PMC free article] [PubMed]
  • Barley Boulevard: A Shortcut to Barley Information in GrainGenes and Elsewhere. http://wheat.pw.usda.gov/GG2/Barley/
  • Szűcs P, Blake VC, Bhat PR, Chao S, Close TJ, Cuesta-Marcos A, Muehlbauer GJ, Ramsay LV, Waugh R, Hayes PM. An integrated resource for barley linkage map and malting quality QTL alignment. The Plant Genome. 2009;2:134–140.
  • Suh Y, Vijg J. SNP discovery in associating genetic variation with human disease phenotypes. Mutation Research-Fundamental and Molecular Mechanisms of Mutagenesis. 2005;573(1-2):41–53. doi: 10.1016/j.mrfmmm.2005.01.005. [PubMed] [Cross Ref]
  • Fan JB, Chee MS, Gunderson KL. Highly parallel genomic assays. Nature Reviews Genetics. 2006;7(8):632–644. doi: 10.1038/nrg1901. [PubMed] [Cross Ref]
  • Sato K, Nankaku N, Takeda K. A high-density transcript linkage map of barley derived from a single population. Heredity. 2009;103(2):110–117. doi: 10.1038/hdy.2009.57. [PubMed] [Cross Ref]
  • Close TJ, Bhat PR, Lonardi S, Wu Y, Rostoks N, Ramsay L, Druka A, Stein N, Svensson JT, Wanamaker S, Bozdag S, Roose ML, Moscou MJ, Chao S, Varshney RK, Szűcs P, Sato K, Hayes PM, Matthews DE, Kleinhofs A, Muehlbauer GJ, DeYoung J, Marshall DF, Madishetty K, Fenton RD, Condamine P, Graner A, Waugh R. Development and implementation of high throughput SNP genotyping in barley. BMC Genomics. 2009;10:582. doi: 10.1186/1471-2164-10-582. [PMC free article] [PubMed] [Cross Ref]
  • Metzker L. Sequencing technologies - the next generation. Nat Rev Genet. 2010;1(11):31–46. doi: 10.1038/nrg2626. [PubMed] [Cross Ref]
  • Huang X, Feng Q, Qian Q, Zhao Q, Wang L, Wang A, Guan J, Fan D, Weng Q, Huang T, Dong G, Sang T, Han B. High-throughput genotyping by whole-genome resequencing. Genome Research. 2009;19(6):1068–1076. doi: 10.1101/gr.089516.108. [PMC free article] [PubMed] [Cross Ref]
  • Bentley DR, Balasubramanian S, Swerdlow HP, Smith GP, Milton J, Brown CG, Hall KP, Evers DJ, Barnes CL, Bignell HR, Boutell JM, Bry-ant J, Carter RJ, Keira Cheetham R, Cox AJ, Ellis DJ, Flatbush MR, Gormley NA, Humphray SJ, Irving LJ, Karbelashvili MS, Kirk SM, Li H, Liu X, Maisinger KS, Murray LJ, Obradovic B, Ost T, Parkinson ML, Pratt MR. et al. Accurate whole human genome sequencing using reversible terminator chemistry. Nature. 2008;456(7218):53–59. doi: 10.1038/nature07517. [PMC free article] [PubMed] [Cross Ref]
  • Miller MR, Dunham JP, Amores A, Cresko WA, Johnson EA. Rapid and cost-effective polymorphism identification and genotyping using restriction site associated DNA (RAD) markers. Genome Research. 2007;17(2):240–248. doi: 10.1101/gr.5681207. [PMC free article] [PubMed] [Cross Ref]
  • Miller MR, Atwood TS, Eames BF, Eberhart JK, Yan YL, Postlethwait JH, Johnson EA. RAD marker microarrays enable rapid mapping of zebrafish mutations. Genome Biology. 2007;8(6) doi: 10.1186/gb-2007-8-6-r105. [PMC free article] [PubMed] [Cross Ref]
  • Lewis ZA, Shiver AL, Stiffler N, Miner MR, Johnson EA, Selker EU. High-density detection of restriction-site-associated DNA markers for rapid mapping of mutated loci in neurospora. Genetics. 2007;177:1163–1171. doi: 10.1534/genetics.107.078147. [PMC free article] [PubMed] [Cross Ref]
  • Baird NA, Etter PD, Atwood TS, Currey MC, Shiver AL, Lewis ZA, Selker EU, Cresko WA, Johnson EA. Rapid SNP Discovery and Genetic Mapping Using Sequenced RAD Markers. Plos One. 2008;3(10) doi: 10.1371/journal.pone.0003376. [PMC free article] [PubMed] [Cross Ref]
  • Ganal MW, Altmann T, Roder MS. SNP identification in crop plants. Curr Opin Plant Biol. 2009;12(2):211–217. doi: 10.1016/j.pbi.2008.12.009. [PubMed] [Cross Ref]
  • Lander E, Waterman M. Genomic mapping by fingerprinting random clones: A mathematical analysis. Genomics. 1988;2:231–239. doi: 10.1016/0888-7543(88)90007-9. [PubMed] [Cross Ref]
  • Van Ooijen JW. JoinMap 4, Software for the calculation of genetic linkage maps in experimental populations. Kyazma BV: Wageningen, Netherlands. 2006.
  • Wenzl P, Carling J, Kudrna D, Jaccoud D, Huttner E, Kleinhofs A, Kilian A. Diversity Arrays Technology (DArT) for whole-genome profiling of barley. Proceedings of the National Academy of Sciences of the United States of America. 2004;101(26):9915–9920. doi: 10.1073/pnas.0401076101. [PMC free article] [PubMed] [Cross Ref]
  • Costa JM, Corey A, Hayes PM, Jobet C, Kleinhofs A, Kopsich-Obusch A, Kramer SF, Kudrna D, Li M, Riera-Lizarazu O, Sato K, Szűcs P, Toojinda T, Vales MI, Wolfe RI. Molecular mapping of the Oregon Wolfe Barley: a phenotypically polymorphic doubled-haploid population. Theoretical and Applied Genetics. 2001;103(2-3):415–424. doi: 10.1007/s001220100622. [Cross Ref]
  • Oregon Wolfe Barley Data and Grain Genes Tools: Population Size. http://wheat.pw.usda.gov/ggpages/maps/OWB/
  • Langmead B, Trapnell C, Pop M, Salzberg SL. Ultrafast and memory-efficient alignment of short DNA sequences to the human genome. Genome Biology. 2009;10(3) doi: 10.1186/gb-2009-10-3-r25. [PMC free article] [PubMed] [Cross Ref]
  • Quackenbush J, Cho J, Lee D, Liang F, Holt I, Karamycheva S, Parvizi B, Pertea G, Sultana R, White J. The TIGR Gene Indices: analysis of gene transcript sequences in highly sampled eukaryotic species. Nucleic Acids Research. 2001;29(1):159–164. doi: 10.1093/nar/29.1.159. [PMC free article] [PubMed] [Cross Ref]
  • Ouyang S, Buell CR. The TIGR Plant Repeat Databases: a collective resource for the identification of repetitive sequences in plants. Nucleic Acids Research. 2004;32:D360–D363. doi: 10.1093/nar/gkh099. [PMC free article] [PubMed] [Cross Ref]
  • Yu J, Hu S, Wang J, Wong GK, Li S, Liu B, Deng Y, Dai L, Zhou Y, Zhang X, Cao M, Liu J, Sun J, Tang J, Chen Y, Huang X, Lin W, Ye C, Tong W, Cong L, Geng J, Han Y, Li L, Li W, Hu G, Li J, Liu Z, Qi Q, Li T, Wang X. et al. A draft sequence of the rice genome (Oryza sativa L. ssp indica) Science. 2002;296(5565):79–92. doi: 10.1126/science.1068037. [PubMed] [Cross Ref]
  • The International Brachypodium Initiative. Genome sequencing and analysis of the model grass Brachypodium distachyon. Nature. 2010;463:763–768. doi: 10.1038/nature08747. [PubMed] [Cross Ref]
  • Salse J, Chagué V, Bolot S, Magdelenat G, Huneau C, Pont C, Belcram H, Couloux A, Gardais S, Evrard A, Segurens B, Charles M, Ravel C, Samain S, Charmet G, Boudet N, Chalhoub B. New insights into the origin of the B genome of hexaploid wheat: Evolutionary relationships at the SPA genomic region with the S genome of the diploid relative Aegilops speltoides. BMC Genomics. 2008;25:9–555. [PMC free article] [PubMed]
  • Bennetzen JL, Freeling M. The unified grass genome: Synergy in synteny. Genome Research. 1997;7(4):301–306. [PubMed]
  • Gale MD, Devos KM. Comparative genetics in the grasses. Proceedings of the National Academy of Sciences of the United States of America. 1998;95(5):1971–1974. doi: 10.1073/pnas.95.5.1971. [PMC free article] [PubMed] [Cross Ref]
  • Nipper RW, Atwood TS, Boone JQ, Gribbin JM, Johnson EA. SNP Discovert in Zea Mays using Sequenced Restriction-site Associated DNA Markers. Acta Hort (ISHS) 2009;859:129–133. http://www.actahort.org/books/859/859_15.htm
  • Vales MI, Schon CC, Capettini F, Chen XM, Corey AE, Mather DE, Mundt CC, Richardson KL, Sandoval-Islas JS, Utz HF, Hayes PM. Effect of population size on the estimation of QTL: a test using resistance to barley stripe rust. Theoretical and Applied Genetics. 2005;111(7):1260–1270. doi: 10.1007/s00122-005-0043-y. [PubMed] [Cross Ref]
  • Li XM, Quigg RJ, Zhou J, Xu SZ, Masinde G, Mohan S, Baylink DJ. A critical evaluation of the effect of population size and phenotypic measurement on QTL detection and localization using a large F2 murine mapping population. Genetics and Molecular Biology. 2006;29(1):166–173. doi: 10.1590/S1415-47572006000100030. [Cross Ref]
  • Keurentjes JJB, Bentsink L, Alonso-Blanco C, Hanhart CJ, Vries HBD, Effgen S, Vreugdenhil D, Koornneef M. Development of a near-isogenic line population of Arabidopsis thaliana and comparison of mapping power with a recombinant inbred line population. Genetics. 2007;175(2):891–905. doi: 10.1534/genetics.106.066423. [PMC free article] [PubMed] [Cross Ref]
  • Zhao HH, Fernando RL, Dekkers JCM. Power and precision of alternate methods for linkage disequilibrium mapping of quantitative trait loci. Genetics. 2007;175(4):1975–1986. doi: 10.1534/genetics.106.066480. [PMC free article] [PubMed] [Cross Ref]
  • Melchinger AE, Utz HF, Schon CC. Quantitative trait loci (QTL) mapping using different testers and independent population samples in maize reveals low power of QTL detection and large bias in estimates of QTL effects. Genetics. 1998;149(1):383–403. [PMC free article] [PubMed]
  • Utz HF, Melchinger AE, Schon CC. Bias and sampling error of the estimated proportion of genotypic variance explained by quantitative trait loci determined from experimental data in maize using cross validation and validation with independent samples. Genetics. 2000;154(4):1839–1849. [PMC free article] [PubMed]
  • Schon CC, Utz HF, Groh S, Truberg B, Openshaw S, Melchinger AE. Quantitative trait locus mapping based on resampling in a vast maize testcross experiment and its relevance to quantitative genetics for complex traits. Genetics. 2004;167(1):485–498. doi: 10.1534/genetics.167.1.485. [PMC free article] [PubMed] [Cross Ref]
  • Arbelbide M, Yu J, Bernardo R. Power of mixed-model QTL mapping from phenotypic, pedigree and marker data in self-pollinated crops. Theoretical and Applied Genetics. 2006;112(5):876–884. doi: 10.1007/s00122-005-0189-7. [PubMed] [Cross Ref]
  • Peng J, Richards DE, Hartley NM, Murphy GP, Devos KM, Flintham JE, Beales J, Fish LJ, Worland AJ, Pelica F, Sudhakar D, Christou P, Snape JW, Gale MD, Harberd NP. 'Green Revolution' genes encode mutant gibberellin response modulators. Nature. 1999;400(6741):256–261. doi: 10.1038/22307. [PubMed] [Cross Ref]
  • Von Zitzewitz J, Szűcs P, Dubcovsky J, Yan LL, Francia E, Pecchioni N, Casas A, Chen THH, Hayes PM, Skinner JS. Molecular and structural characterization of barley vernalization genes. Plant Molecular Biology. 2005;59(3):449–467. doi: 10.1007/s11103-005-0351-2. [PubMed] [Cross Ref]
  • Szűcs P, Skinner JS, Karsai I, Cuesta-Marcos A, Haggard KG, Corey AE, Chen THH, Hayes PM. Validation of the VRN-H2/VRN-H1 epistatic model in barley reveals that intron length variation in VRN-H1 may account for a continuum of vernalization sensitivity. Molecular Genetics and Genomics. 2007;277(3):249–261. [PubMed]
  • Palmer LE, Rabinowicz PD, O'Shaughnessy AL, Balija VS, Nascimento LU, Dike S, de la Bastide M, Martienssen RA, McCombie WR. Maize genome sequencing by methylation filtrations. Science. 2003;302(5653):2115–2117. doi: 10.1126/science.1091265. [PubMed] [Cross Ref]
  • Rabinowicz PD, Citek R, Budiman MA, Nunberg A, Bedell JA, Lakey N, O'Shaughnessy AL, Nascimento LU, McCombie WR, Martienssen RA. Differential methylation of genes and repeats in land plants. Genome Research. 2005;15(10):1431–1440. doi: 10.1101/gr.4100405. [PMC free article] [PubMed] [Cross Ref]
  • Ma XF, Gustafson JP. Timing and rate of genome variation in triticale following allopolyploidization. Genome. 2006;49(8):950–958. doi: 10.1139/G06-078. [PubMed] [Cross Ref]
  • ReynaLopez GE, Simpson J, RuizHerrera J. Differences in DNA methylation patterns are detectable during the dimorphic transition of fungi by amplification of restriction polymorphisms. Molecular & General Genetics. 1997;253(6):703–710. [PubMed]
  • Voorrips RE. MapChart: Software for the graphical presentation of linkage maps and QTLs. Journal of Heredity. 2002;93(1):77–78. doi: 10.1093/jhered/93.1.77. [PubMed] [Cross Ref]
  • Wang S, Basten CJ, Gaffney P, Zeng ZB. Windows QTL Cartographer 2.5 user manual. Bioinformatics Research Center, North Carolina State Univ., Raleigh; 2005. http://www.kyazma.nl/docs/JM4manual.pdf (verified 30 December 2009)
  • Zeng ZB. Precision mapping of quantitative trait loci. Genetics. 1994;136:1457–1468. [PMC free article] [PubMed]
  • Kao CH, Zeng ZB, Teasdale RD. Multiple interval mapping for quantitative trait loci. Genetics. 1999;152:1203–1216. [PMC free article] [PubMed]
  • Komatsuda T, Pourkheirandish M, He C, Azhaguvel O, Kanamori H, Perovic D, Stein N, Graner A, Wicker T, Tagiri A, Lundqvist U, Fujimura T, Matsuoka M, Matsumoto T, Yano M. Six-rowed barley originated from a mutation in a homeodomain-leucine zipper I-class homeobox gene. Proceedings of the National Academy of Sciences of the United States of America. 2007;104:1424–1429. doi: 10.1073/pnas.0608580104. [PMC free article] [PubMed] [Cross Ref]
  • Patron NJ, Smith AM, Fahy BF, Hylton CM, Naldrett MJ, Rossnagel BG, Denyer K. The altered pattern of amylose accumulation in the endosperm of low-amylose barley cultivars is attributable to a single mutant allele of granule-bound starch synthase I with a deletion in the 5 '-non-coding region. Plant Physiology. 2002;130(1):190–198. doi: 10.1104/pp.005454. [PMC free article] [PubMed] [Cross Ref]
  • Taketa S, Amino S, Tsujino Y, Sato T, Saisho D, Kakeda K, Nomura M, Suzuki T, Matsumoto T, Sato K, Kanamori H, Kawasaki S, Takeda K. Barley grain with adhering hulls is controlled by an ERF family transcription factor gene regulating a lipid biosynthesis pathway. Proceedings of the National Academy of Sciences of the United States of America. 2008;105(10):4062–4067. doi: 10.1073/pnas.0711034105. [PMC free article] [PubMed] [Cross Ref]

Articles from BMC Genomics are provided here courtesy of BioMed Central
PubReader format: click here to try

Formats:

Related citations in PubMed

See reviews...See all...

Cited by other articles in PMC

See all...

Links

Recent Activity

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

See more...