Logo of bmcmicrBioMed Centralsearchsubmit a manuscriptregisterthis articleBMC Microbiology
BMC Microbiol. 2010; 10: 279.
Published online 2010 Nov 9. doi:  10.1186/1471-2180-10-279
PMCID: PMC2993698

A rapid and simple method for constructing stable mutants of Acinetobacter baumannii



Acinetobacter baumannii is a multidrug-resistant bacterium responsible for nosocomial infections in hospitals worldwide. Study of mutant phenotypes is fundamental for understanding gene function. The methodologies developed to inactivate A. baumannii genes are complicated and time-consuming; sometimes result in unstable mutants, and do not enable construction of double (or more) gene knockout mutant strains of A. baumannii.


We describe here a rapid and simple method of obtaining A. baumannii mutants by gene replacement via double crossover recombination, by use of a PCR product that carries an antibiotic resistance cassette flanked by regions homologous to the target locus. To demonstrate the reproducibility of the approach, we produced mutants of three different chromosomal genes (omp33, oxyR, and soxR) by this method. In addition, we disrupted one of these genes (omp33) by integration of a plasmid into the chromosome by single crossover recombination, the most widely used method of obtaining A. baumannii mutants. Comparison of the different techniques revealed absolute stability when the gene was replaced by a double recombination event, whereas up to 40% of the population reverted to wild-type when the plasmid was disrupting the target gene after 10 passages in broth without selective pressure. Moreover, we demonstrate that the combination of both gene disruption and gene replacement techniques is an easy and useful procedure for obtaining double gene knockout mutants in A. baumannii.


This study provides a rapid and simple method of obtaining stable mutants of A. baumannii free of foreign plasmidic DNA, which does not require cloning steps, and enables construction of multiple gene knockout mutants.


Acinetobacter baumannii is a Gram-negative coccobacillus that is increasingly recognized as a major pathogen causing nosocomial infections worldwide, particularly in patients admitted to intensive care units [1,2]. A. baumannii can cause pneumonia, wound infections, urinary tract infections, bacteremia and meningitis [3,4]. Its clinical significance, especially in recent years, has increased because of the ability of the bacterium to acquire resistance determinants, making it one of the microorganisms threatening the current antibiotic era [5].

The availability of the genome sequences of several strains of A. baumannii opens up new perspectives in the study of this bacterial species [6-9]. The artificial introduction of mutations, by molecular techniques, is a useful way of advancing our understanding of the genetics of A. baumannii. The method most commonly used to generate A. baumannii mutants involves integration of a plasmid into the chromosome by single crossover recombination. This method requires an internal fragment homologous to the target gene cloned into a suicide vector carrying resistance cassettes [10], which is a major limitation for systematic construction of mutants in post-genomic studies of A. baumannii. The possibility that a second crossover event will return the mutant to a wild-type phenotype is another important inconvenience. The gene replacement method is a useful way of overcoming these limitations.

Gene replacement typically involves transformation of a non-replicating plasmid containing a deleted or modified gene, followed by low-frequency integration of a plasmid into the chromosome and selection for resolution events to identify gene replacement candidates. In fact, in A. baumannii, the plasmids pSSK10, pEX100T, and pJQ200 are valuable tools for constructing mutants by this methodology [11-13]. However, these gene replacement methodologies require several subcloning steps and phenotypic screenings. As a means of circumventing these complicated approaches, we have developed a rapid and simple method of inactivating of chromosomal genes that does not require cloning steps. Moreover, the mutants grow directly on agar plates containing appropriate antibiotics and are confirmed by a simple PCR assay.

Integration of a linear piece of foreign DNA requires two recombination events, whereby the original genetic material is replaced by the recombinant DNA [14]. The methodology used in the present study is based on electroporation of a recipient A. baumannii strain with a linear PCR fragment carrying an antibiotic resistance cassette flanked by regions homologous to the target locus. This method was used successfully to inactivate three chromosomal loci in A. baumannii (omp33, oxyR, and soxR). Moreover, the stability of the mutant, gene expression, and the efficiency of gene disruption and gene replacement methods were compared. Finally, the combination of both techniques was found to be an easy and useful method of obtaining double knockout mutants of A. baumannii.


Replacement of the A. baumannii omp33 gene

A PCR product containing a kanamycin resistance cassette flanked by 500 bp of the regions surrounding the omp33 gene (Figure (Figure1a,1a, Table Table1)1) was introduced into the A. baumannii ATCC 17978 strain by electroporation. After selection on kanamycin-containing plates, the A. baumannii Δomp33::Km mutant was obtained. The frequency of generation of mutants by gene replacement was approximately 10-7. The PCR tests with locus-specific primers revealed that 2 of 15 clones obtained had replaced the wild-type gene by the kanamycin cassette (Figure (Figure1b).1b). In addition, allelic replacement in mutant clones was further confirmed by sequencing the PCR products obtained (data not shown).

Figure 1
omp33 replacement. (a) Schematic representation of the linear DNA constructed for the omp33 gene replacement, which was completely deleted. The oligonucleotides used (small arrows) are listed in Table 2. (b) Screening of omp33 A. baumannii mutants generated ...
Table 1
Genes of A. baumannii strain ATCC 17978 inactivated in the present study.

Disruption of the A. baumannii omp33 gene

The gene disruption method was also used to inactivate the omp33 gene. Gene disruption was carried out by cloning a 387-pb internal fragment of the omp33 gene into the pCR-BluntII-TOPO, to obtain the pTOPO33int plasmid (Figure (Figure2a).2a). After transformation of the recombinant plasmid into the A. baumannii ATCC 17978 strain and selection on kanamycin-containing plates, the A. baumannii omp33::TOPO mutant was obtained. The frequency of generation of mutants by gene disruption was approximately 10-5. PCR tests with locus-specific primers revealed that all the clones analyzed (10 of approximately 100) contained fragments of the expected size (Figure (Figure2b).2b). In addition, gene disruption in mutant clones was further confirmed by sequencing the PCR products obtained (data not shown).

Figure 2
omp33 disruption. (a) Schematic representation of the strategy used to construct the omp33 mutant by gene disruption (omp33::TOPO). The oligonucleotides used (small arrows) are listed in Table 2. The boxes indicated by A and A' represent the original ...

Stable maintenance of plasmid insertion into the chromosome requires drugselection

Gene knockout stability was tested by culturing both the Δomp33::Km and omp33::TOPO A. baumannii mutants under nonselective conditions (in the absence of antibiotics). Cultures of the mutant strains were initially grown in LB and at passages 1, 5, and 10, the cultures were dilution plated to obtain individual colonies, with replicate platings of 100 colonies for each strain on LB and LB supplemented with kanamycin. The frequency of loss of kanamycin resistance in each passage after growth in non-selective conditions was 1% (first), 9% (fifth), and 37% (tenth) for the gene disrupted omp33::TOPO mutant. By contrast, the gene-replaced Δomp33::Km mutant was stable since no reversions were detected in any passage. As expected, when the same experiment was carried out in the presence of selective pressure, both mutants remained stable (all colonies analyzed were resistant to kanamycin).


Taking advantage of the fact that the Omp33 protein has been identified in the proteome of A. baumannii ATCC 17978 strain by 2-DE and MALDITOF/TOF [15], we observed the absence of the Omp33 protein by 2-DE analysis of the Δomp33::Km mutant (Figure (Figure3a).3a). In order to complement the mutant phenotype, we constructed and tested the expression plasmid pET-RA. The wild-type omp33 gene without its promoter region was cloned into this expression plasmid. This construction was then introduced into the Δomp33::Km mutant strain by electroporation. The cell surface-associated proteins of the wild-type strain and the Δomp33::Km mutant strain complemented with the pET-RA-OMP33 plasmid were extracted and analyzed by 2DE. The Omp33 protein was detected in the mutant complemented with the Omp33 ORF under the control of the β-lactamase CTX-M14 gene promoter of the pET-RA plasmid (Figure (Figure3a3a).

Figure 3
Omp33 detection. (a) 2-DE gels showing A. baumannii proteins from the wild-type strain (ATCC 17978), Δomp33::Km mutant, and Δomp33::Km mutant complemented with pET-RA-OMP33 plasmid (+33). The black circles indicate the Omp33 protein. (b) ...

Omp33 detection

Western blot analysis was performed for further confirmation of the absence of Omp33 in the A. baumannii mutants. For this purpose, cell surface-associated proteins of wild-type strain, omp33 mutants, and pET-RA-OMP33-complemented mutants were extracted and subjected to Omp33 Western blot analysis (Figure (Figure3b).3b). The Omp33 protein was not detected in the cell surface-associated proteins of the mutants. As expected, the Omp33 protein was detected in the cell surface-associated proteins of both Δomp33::Km and omp33::TOPO mutants containing the pET-RAOMP33 vector.

Reproducibility of the gene replacement method

To ensure reproducibility of the gene replacement method, we produced the gene replacements of oxyR and soxR (Table (Table1).1). The same gene replacement method used to produce the Δomp33::Km mutant was also used to construct the ΔoxyR::Km and ΔsoxR::Km mutants (Figure (Figure4),4), with the primers listed in Table Table2.2. The PCR tests with locus-specific primers revealed that 2 of the 7 clones obtained for the oxyR gene, and all clones (3) obtained for the soxR gene had replaced the wild-type gene with the kanamycin resistance cassette (Figure (Figure4).4). In addition, allelic replacement in mutant clones was further confirmed by sequencing the PCR products obtained (data not shown). Transcriptional analyses demonstrated the lack of both oxyR and soxR gene expression in the ΔoxyR::Km and ΔsoxR::Km mutants, respectively (Figure (Figure55).

Figure 4
oxyR and soxR replacement. (a) Schematic representation of the linear DNA constructed for the oxyR gene replacement. The oligonucleotides used (small arrows) are listed in Table 2. (b) Screening of oxyR A. baumannii mutants generated by gene replacement. ...
Table 2
Oligonucleotides used in the present study
Figure 5
Transcriptional analysis. RT-PCR analysis of RNA extracted from the wild-type, ΔoxyR::Km, ΔsoxR::Km, ΔoxyR::Km-omp33::TOPO, and ΔsoxR::Km-omp33::TOPO strains showing the lack of oxyR and soxR transcription in the corresponding ...

Construction of double knockout mutants

With the purpose of generating double knockout mutants, the recombinant plasmid pTOPO33int was transformed into both ΔoxyR::Km and ΔsoxR::Km mutants. After selection on zeocin- and kanamycin-containing plates, the ΔoxyR::Km-omp33::TOPO and ΔsoxR::Km-omp33::TOPO A. baumannii double knockout mutants were obtained. PCR tests with locus-specific primers revealed that both mutants had fragments of the expected size (data not shown). In addition, gene disruption in mutant clones was further confirmed by sequencing the PCR products obtained, by transcriptional analyses to detect the oxyR and soxR genes (Figure (Figure5),5), and by Western blot analyses to detect the omp33 gene (data not shown).


Allelic mutation experiments enable investigation of the functions of many unknown genes identified during the sequencing of entire genomes. A number of methods can be used to inactivate bacterial chromosomal genes. As mentioned above, disruption of the A. baumannii chromosome can be achieved by integration of a plasmid into the chromosome by single crossover recombination [10]. For this purpose, an internal fragment that is homologous to the target gene must be cloned into a non-replicating plasmid carrying at least one antibiotic resistance cassette. However, the stability of this type of mutant must be taken into account, because if the gene-disrupted mutant cells are grown in a medium lacking antibiotic pressure, the integrated sequence could be removed, and the disrupted gene could revert to the original wild-type [16]. We tested this possibility, and found that this is indeed the case, as also found in similar studies with E. coli [16]. Therefore, one limitation of the method is that the resulting mutants should always be maintained in an appropriate medium containing selective antibiotics. Another disadvantage of the method is that further manipulations of the mutant strain are restricted, because the same vector cannot be used (because undesired recombination events would be highly likely), thus making it impossible to construct multiple gene knockout mutants.

The gene replacement method has recently been used to generate stable A. baumannii mutants [11-13]. This method is based on integration of a plasmid containing the inactivated gene of interest into the bacterial chromosome by single crossover recombination, followed by resolution (or excision) of the integrated DNA by a second recombination event, resulting in replacement of the original wild-type gene by the inactivated gene. The key step in this procedure, in A. baumannii, is counter-selection (widely used with Gram-negative bacteria) by the detection of sucrose sensitivity in the presence of the Bacillus subtilis sacB gene coding for levansucrase [17]. This method of counter-selection has been found to be useful for several other environmental bacteria [11,12,18]. Plasmids pSSK10, pEX100T, and pJQ200 have been successfully used to obtain A. baumannii mutants by this method [11-13]. However, most bacteria subjected to homologous recombination, even under negative selection for the sacB gene, are wild-type and it is not possible to isolate the desired mutant directly [19-21]. Another disadvantage of this method is that integration of the DNA may not always provide the desired replacement, since foreign DNA with low or no sequence homology would rely on illegitimate recombination events, as previously reported for Acinetobacter and other species [14,16]. In addition, all of these gene replacement methodologies are time-consuming, and require several steps involving subcloning into a suicide delivery vector followed by electroporation into E. coli and subsequent transfer into A. baumannii by electroporation or conjugation. To avoid such situations, we propose a method based on the electroporation of A. baumannii electrocompetent cells with linear DNA, a PCR product including an antibiotic resistance cassette flanked by regions homologous to the target locus. However, as expected, we noted an important disadvantage of the replacement method (which requires two recombination events), with respect to the gene disruption method (which only requires one recombination event), i.e. the low efficiency with regard to obtaining mutants (10-7 vs. 10-5). In addition, we observed more illegitimate recombination events with the new method than with the gene disruption technique, since several colonies acquired the resistance antibiotic cassette (confirmed by PCR), although the wild-type target gene was not replaced (Figures (Figures1,1, ,2,2, and and4).4). Nevertheless, the new method is a useful genetic tool for systematic generation of knockouts. Moreover, to our knowledge, there are no previous reports of double knockout mutant strains of A. baumannii. However, we demonstrate that the combination of both gene disruption and gene replacement techniques is an easy and useful procedure for obtaining double gene-knockout mutants in A. baumannii.

Taking into account the results presented here, it intuitively appears that the gene replacement method would be successful with any strain of A. baumannii, including clinical strains, with the only limitation being the use of an appropriate antibiotic resistance marker. Although the kanamycin resistance cassette cannot be used in clinical strains (all the clinical strains of A. baumannii taken from our collection were kanamycin resistant: data not shown), use of another antibiotic resistance marker such as rifampicin (for which a low level of resistance has been demonstrated in approximately 50% of multidrug-resistant A. baumannii clinical isolates in Spain [22,23]), would be appropriate for generating mutants by gene replacement in these problematic strains.


We report mutagenesis of three A. baumannii genes by use of a simple and rapid method. The method offers advantages such as no cloning steps, stability even in the absence of selective pressure, and the possibility of constructing multiple gene knockout mutants. The method may therefore facilitate the understanding of the genetics of A. baumannii. Although not tested, it is also possible that this novel method may also work with other pathogenic bacteria, in which genetic manipulation techniques are generally less well established than for E. coli and other bacterial species. Finally, the gene disruption method is recommended when only one A. baumannii gene must be inactivated, and when it is possible to maintain selective pressure, since it is the fastest and most efficient method of producing A. baumannii mutants described so far.


Bacterial strains, plasmids, and growth conditions

Bacterial strains and plasmids used in this study are listed in Table Table3.3. The E. coli and A. baumannii strains were grown in Luria Bertani (LB) medium [24]. When necessary, kanamycin (50 μg/ml), rifampicin (50 μg/ml), and zeocin (20 μg/ml for E. coli and 200 μg/ml for A. baumannii) were added to the growth media. All cultures were incubated at 37°C, 180 rpm. The frequency of generation of mutants was calculated as the number of mutants obtained, divided by the total CFU.

Table 3
Bacterial strains and plasmids used in the present study

DNA manipulations

Genomic and plasmid isolation were performed with a Wizard Genomic DNA Purification Kit (Promega) and Wizard Plus SV Minipreps DNA Purification System (Promega), respectively. Restriction enzymes and DNA-modifying enzymes were purchased from Promega and used according to the manufacturer's recommendations. Standard PCR amplifications were performed with BioTaq DNA polymerase (Bioline). When necessary, high fidelity and blunt-ended PCR products were amplified with Expand High Fidelity (Roche) and Accuzyme (Bioline) DNA polymerases, respectively. All oligonucleotides (Sigma) used in the study are listed in Table Table2.2. PCR products were purified with the High Pure PCR Product Purification Kit (Roche). When high concentrations of purified PCR products were required, a MinElute PCR Purification Kit (Qiagen) was used. All the recombinant plasmids obtained in the study, and the PCR products indicated, were sequenced by the Macrogen sequencing service (Seoul, Korea).


All strains were made electrocompetent as follows. Bacterial overnight cultures were grown in LB broth and subcultured at a dilution of 1:20 in 100 ml of fresh LB medium. Cultures were grown at an OD600 of 0.8 and then incubated on ice for 10 min. Cells were pelleted by centrifugation and then washed 3 times with 10% (v/v) glycerol and finally resuspended in 500 μl of 10% (v/v) glycerol. An aliquot of 100 μl of the cell suspension was mixed with the recombinant DNA (up to 20 μl). The mixture was placed in a pre-chilled sterile electroporation cuvette (1 mm electrode gap, Bio-Rad) and immediately pulsed by use of a Bio-Rad Gene Pulser (1.8 kV, 200 W, and 25 μF). The mixture was incubated at 37°C for 1 h with 1 ml of LB broth. Cells were spread on LB agar containing the appropriate antibiotics and incubated at 37°C.

Knockout construction by gene replacement

The upstream and downstream regions (approximately 0.5 kbp each) of the target gene were amplified from genomic DNA of A. baumannii ATCC 17978 strain using primer pairs upFW + upintRV and dwintFW + dwRV (Figure (Figure6),6), respectively. The kanamycin cassette was amplified using primers Kmup and Kmdw (Table (Table2)2) and the pCR-BluntII-TOPO vector (Invitrogen) as a template. The upintRV and dwintFW primers (Figure (Figure6)6) contained, at their 5' ends, an extension of approximately 20 nucleotides homologous to the Kmup and Kmdw primers, respectively. The three PCR products obtained in the first step were mixed at equimolar concentrations and subjected to a nested overlap-extension PCR with FWnest and RVnest primers (Figure (Figure6)6) to generate a kanamycin resistance cassette flanked by both the upstream and the downstream gene homologous regions. The nested overlap-extension PCR was carried out with an Expand High Fidelity Taq DNA polymerase (Roche), according to the manufacturer's recommendations; the conditions used were as follows: 94°C for 15 s, 40°C for 1 min, 72°C for 2 min (10 cycles); 94°C for 15 s, 55°C for 1 min, 72°C for 3 min (20 cycles), and a final extension at 68°C for 10 min. Electroporation of the A. baumannii ATCC 17978 strain was performed with approximately 5 μg of the purified PCR product containing the inactivated gene. Cells were then plated on LB agar containing kanamycin for selection of mutants whose wild-type genes were replaced by allelic exchange via double crossover recombination. Gene replacement in candidate clones was verified by PCR with upFW and dwRV primers (Figure (Figure6).6). Allelic replacement in candidate clones was further confirmed by sequencing the mutant region in the resulting mutants.

Figure 6
Gene replacement. (a) Schematic representation of the strategy used to construct mutants by gene replacement. Small, red and shaded arrows represent the primers, the target gene, and the kanamycin (Km) resistance cassette, respectively. The three PCR ...

Knockout construction by gene disruption

Plasmid insertion in the omp33 gene (Table (Table1)1) was carried out as previously described [10], with slight modifications. Briefly, kanamycin- and zeocin-resistant plasmid pCR-BluntII-TOPO, unable to replicate in A. baumannii, was used as a suicide vector. An internal fragment (387 bp) of the omp33 gene was amplified by PCR with 33intUP and 33intDW primers (Table (Table2)2) and genomic DNA from A. baumannii ATCC 17978 as a template. The PCR product was cloned into the pCR-BluntII-TOPO vector and electroporated in E. coli to yield the pTOPO33int plasmid (Table (Table3).3). Recombinant plasmid (0.1 μg) was then introduced in the kanamycin- and zeocin-susceptible A. baumannii ATCC 17978 strain by electroporation. Mutants were selected on kanamycin-containing plates. Inactivation of the omp33 gene by insertion of the plasmid via single crossover recombination was confirmed by sequencing the amplified PCR products with the SP6 + 33extUP and T7 + 33extDW primer pairs (Table (Table22).

Construction of pET-RA plasmid for gene expression in A. baumannii

In order to complement mutant phenotypes, the pET-RA plasmid [Genbank: HM219006] was constructed, and carried a rifampicin resistance cassette, a gene coding for a green fluorescent protein (GFP), and the A. baumannii replication origin, which is a plasmid origin of replication (Figure (Figure7).7). The pET-RA vector was used to express promoterless genes under control of the CTX-M14 β-lactamase gene promoter, previously cloned upstream of the GFP gene (Figure (Figure7).7). For pET-RA construction, the pMW82 vector [Genbank: EF363313] was amplified by PCR, excluding the coding region of the ampicillin resistance cassette. The rifampicin resistance cassette was then amplified from the pAT-RA vector [Genbank: HM219005] and introduced into the pMW82 vector. The CTXM-14 promoter was cloned into the pMW82 vector BamHI site. The Acinetobacter replication origin was amplified from the pAT-RA vector and cloned into the HindIII site of the pMW82 vector. As a result, the pET-RA vector containing the CTXM-14 promoter was obtained and used for cloning and expression of genes in the XbaI-NcoI restriction sites.

Figure 7
pET-RA construction. Schematic representation of the construction of the pET-RA plasmid. The GenBank accession numbers of the plasmids are indicated in parenthesis. Rif, rifampicin; Amp, ampicillin; GFP, green fluorescent protein.

Complementation of omp33 mutants

In order to complement the A. baumannii omp33 mutants, the omp33 ORF was amplified with the ATG33XbaI and STOP33NcoI primers (Table (Table2)2) from the A. baumannii ATCC 17978 strain genome and cloned into the XbaI-NcoI restriction sites of the pET-RA vector under the control of the β-lactamase CXT-M-14 gene promoter yielding the pET-RA-OMP33 plasmid (Table (Table3).3). Acinetobacter baumannii omp33 mutants were transformed with the recombinant pETRA-OMP33 plasmid. Transformants were selected on rifampicin- and kanamycin-containing plates and confirmed by PCR with the pETRAFW and pETRARV primers (Table (Table22).

Mutant stability assays

The bacterial cultures were grown in 5 ml of LB broth without kanamycin and incubated at 37°C. Every day, during 10 consecutive days, 100 μl of each culture was diluted in 5 ml of fresh medium and incubated for 24 h. The same experiment was also carried out, for each strain, with medium containing kanamycin. On days 1, 5, and 10, all cultures were diluted 106-fold and dilutions (0.1 ml) were plated on non-selective plates. From these plates, 100 colonies were each transferred to non-selective and selective plates to determine the frequency of revertants, on the basis of the percentage of kanamycin-susceptible colonies.

RNA methods

Bacterial cultures were grown overnight in LB broth supplemented with the appropriate antibiotics at 37°C. RNA isolation was performed with the RNAeasy Plant Mini Kit (Qiagen). The total RNA extraction was subjected to DNaseI (Invitrogen) treatment, following the manufacturer's instructions. In order to evaluate transcription of the genes of interest, an RT-PCR was performed with the First Strand cDNA Transcriptor Synthesis Kit (Roche) and the gyrB as housekeeping gene. Both the first strand synthesis and the PCR amplification were carried out with the specific primers listed in Table Table2.2. Finally, RT-PCR products were visualized in a 1% agarose gel.

Protein analysis

Extraction of A. baumannii cell surface-associated proteins and two-dimensional gel electrophoresis (2-DE) were performed as described elsewhere [15]. Proteins were quantified by the Bradford assay, as previously described [25]. Forty μg of protein from each sample was loaded onto a sodium dodecyl sulphate-polyacrylamide gel (12%) in a minigel apparatus (Bio-Rad) and transferred to a Polyvinylidene Fluoride (PVDF) membrane (Roche). To ensure transfer of proteins from the gel, the membrane was stained with Ponceau red. The membrane was then washed, blocked with 5% (wt/vol) blocking agent (non-fat skimmed milk), and incubated with a primary antibody against Omp33 obtained from mouse (INIBIC, A Coruña). Proteins were visualized by incubation with horseradish peroxidase-conjugated secondary antibody, followed by enhanced chemiluminescence ECL Plus (Amersham Pharmacia Biotech) and detected with the LAS3000 chemiluminescence detector (Fujifilm).

Authors' contributions

JA and MP conceived the design of the study, carried out several experimental procedures, and drafted the manuscript. BG and SR participated in the mutant construction and complementation. CR and JR carried out the protein analysis. PR carried out the construction of pET-RA plasmid. GB participated in the design and coordination of the study and helped to draft the manuscript. All authors read and approved the final manuscript.

Acknowledgements and Funding

The present study was supported by grants from SERGAS (PS08/24 and PS07/90) and INCITE 08CSA064916PR from the Xunta de Galicia, by the Spanish Network for Research in Infectious Diseases RD06/0008/0025, and by grants PI081613 and PS09/00687 from the Instituto de Salud Carlos III (Madrid).

J. Aranda is in receipt of a Sara Borrell post-doctoral grant from the Instituto de Salud Carlos III (Madrid). M. Poza and B. Gómez are in receipt of Isidro Parga Pondal postdoctoral grants from the Xunta de Galicia. S. Rumbo and C. Rumbo are in receipt of pre-doctoral grants from the Instituto de Salud Carlos III (Madrid).


  • Munoz-Price LS, Weinstein RA. Acinetobacter infection. N Engl J Med. 2008;358(12):1271–1281. doi: 10.1056/NEJMra070741. [PubMed] [Cross Ref]
  • Peleg AY, Seifert H, Paterson DL. Acinetobacter baumannii: emergence of a successful pathogen. Clin Microbiol Rev. 2008;21(3):538–582. doi: 10.1128/CMR.00058-07. [PMC free article] [PubMed] [Cross Ref]
  • Naiemi NA, Duim B, Savelkoul PH, Spanjaard L, de Jonge E, Bart A, Vandenbroucke-Grauls CM, de Jong MD. Widespread transfer of resistance genes between bacterial species in an intensive care unit: implications for hospital epidemiology. J Clin Microbiol. 2005;43(9):4862–4864. doi: 10.1128/JCM.43.9.4862-4864.2005. [PMC free article] [PubMed] [Cross Ref]
  • Fournier PE, Richet H. The epidemiology and control of Acinetobacter baumannii in health care facilities. Clin Infect Dis. 2006;42(5):692–699. doi: 10.1086/500202. [PubMed] [Cross Ref]
  • Coyne S, Guigon G, Courvalin P, Perichon B. Screening and quantification of the expression of antibiotic resistance genes in Acinetobacter baumannii with a microarray. Antimicrob Agents Chemother. 2010;54(1):333–340. doi: 10.1128/AAC.01037-09. [PMC free article] [PubMed] [Cross Ref]
  • Smith MG, Gianoulis TA, Pukatzki S, Mekalanos JJ, Ornston LN, Gerstein M, Snyder M. New insights into Acinetobacter baumannii pathogenesis revealed by high-density pyrosequencing and transposon mutagenesis. Genes Dev. 2007;21(5):601–614. doi: 10.1101/gad.1510307. [PMC free article] [PubMed] [Cross Ref]
  • Adams MD, Goglin K, Molyneaux N, Hujer KM, Lavender H, Jamison JJ, MacDonald IJ, Martin KM, Russo T, Campagnari AA. et al. Comparative genome sequence analysis of multidrug-resistant Acinetobacter baumannii. J Bacteriol. 2008;190(24):8053–8064. doi: 10.1128/JB.00834-08. [PMC free article] [PubMed] [Cross Ref]
  • Vallenet D, Nordmann P, Barbe V, Poirel L, Mangenot S, Bataille E, Dossat C, Gas S, Kreimeyer A, Lenoble P. et al. Comparative analysis of Acinetobacters: three genomes for three lifestyles. PLoS One. 2008;3(3):e1805. doi: 10.1371/journal.pone.0001805. [PMC free article] [PubMed] [Cross Ref]
  • Fournier PE, Vallenet D, Barbe V, Audic S, Ogata H, Poirel L, Richet H, Robert C, Mangenot S, Abergel C. et al. Comparative genomics of multidrug resistance in Acinetobacter baumannii. PLoS Genet. 2006;2(1):e7. doi: 10.1371/journal.pgen.0020007. [PMC free article] [PubMed] [Cross Ref]
  • Heritier C, Poirel L, Lambert T, Nordmann P. Contribution of acquired carbapenem-hydrolyzing oxacillinases to carbapenem resistance in Acinetobacter baumannii. Antimicrob Agents Chemother. 2005;49(8):3198–3202. doi: 10.1128/AAC.49.8.3198-3202.2005. [PMC free article] [PubMed] [Cross Ref]
  • Choi AH, Slamti L, Avci FY, Pier GB, Maira-Litran T. The pgaABCD locus of Acinetobacter baumannii encodes the production of poly-beta-1-6-N-acetylglucosamine, which is critical for biofilm formation. J Bacteriol. 2009;191(19):5953–5963. doi: 10.1128/JB.00647-09. [PMC free article] [PubMed] [Cross Ref]
  • Roca I, Marti S, Espinal P, Martinez P, Gibert I, Vila J. CraA, a major facilitator superfamily efflux pump associated with chloramphenicol resistance in Acinetobacter baumannii. Antimicrob Agents Chemother. 2009;53(9):4013–4014. doi: 10.1128/AAC.00584-09. [PMC free article] [PubMed] [Cross Ref]
  • Camarena L, Bruno V, Euskirchen G, Poggio S, Snyder M. Molecular mechanisms of ethanol-induced pathogenesis revealed by RNA-sequencing. PLoS Pathog. p. e1000834. [PMC free article] [PubMed] [Cross Ref]
  • de Vries J, Wackernagel W. Integration of foreign DNA during natural transformation of Acinetobacter sp. by homology-facilitated illegitimate recombination. Proc Natl Acad Sci USA. 2002;99(4):2094–2099. doi: 10.1073/pnas.042263399. [PMC free article] [PubMed] [Cross Ref]
  • Soares NC, Cabral MP, Parreira JR, Gayoso C, Barba MJ, Bou G. 2-DE analysis indicates that Acinetobacter baumannii displays a robust and versatile metabolism. Proteome Sci. 2009;7:37. doi: 10.1186/1477-5956-7-37. [PMC free article] [PubMed] [Cross Ref]
  • Kato C, Ohmiya R, Mizuno T. A rapid method for disrupting genes in the Escherichia coli genome. Biosci Biotechnol Biochem. 1998;62(9):1826–1829. doi: 10.1271/bbb.62.1826. [PubMed] [Cross Ref]
  • Reyrat JM, Pelicic V, Gicquel B, Rappuoli R. Counterselectable markers: untapped tools for bacterial genetics and pathogenesis. Infect Immun. 1998;b66(9):4011–4017. [PMC free article] [PubMed]
  • Steyert SR, Pineiro SA. Development of a novel genetic system to create markerless deletion mutants of Bdellovibrio bacteriovorus. Appl Environ Microbiol. 2007;73(15):4717–4724. doi: 10.1128/AEM.00640-07. [PMC free article] [PubMed] [Cross Ref]
  • Geng SZ, Jiao XA, Pan ZM, Chen XJ, Zhang XM, Chen X. An improved method to knock out the asd gene of Salmonella enterica serovar Pullorum. J Biomed Biotechnol. 2009;2009:646380. [PMC free article] [PubMed]
  • Edwards RA, Keller LH, Schifferli DM. Improved allelic exchange vectors and their use to analyze 987P fimbria gene expression. Gene. 1998;207(2):149–157. doi: 10.1016/S0378-1119(97)00619-7. [PubMed] [Cross Ref]
  • Ried JL, Collmer A. An nptI-sacB-sacR cartridge for constructing directed, unmarked mutations in gram-negative bacteria by marker exchange-eviction mutagenesis. Gene. 1987;57(2-3):239–246. doi: 10.1016/0378-1119(87)90127-2. [PubMed] [Cross Ref]
  • Saballs M, Pujol M, Tubau F, Pena C, Montero A, Dominguez MA, Gudiol F, Ariza J. Rifampicin/imipenem combination in the treatment of carbapenem-resistant Acinetobacter baumannii infections. J Antimicrob Chemother. 2006;58(3):697–700. doi: 10.1093/jac/dkl274. [PubMed] [Cross Ref]
  • Fernandez-Cuenca F, Pascual A, Ribera A, Vila J, Bou G, Cisneros JM, Rodriguez-Bano J, Pachon J, Martinez-Martinez L. [Clonal diversity and antimicrobial susceptibility of Acinetobacter baumannii isolated in Spain. A nationwide multicenter study: GEIH-Ab project (2000)] Enferm Infecc Microbiol Clin. 2004;22(5):267–271. doi: 10.1157/13059819. [PubMed] [Cross Ref]
  • Miller JH. Cold Spring Harbor. Laboratory Press, Cold Spring Harbor, NY; 1992. A short course in bacterial genetics.
  • Bradford MM. A rapid and sensitive method for the quantitation of microgram quantities of protein utilizing the principle of protein-dye binding. Anal Biochem. 1976;72:248–254. doi: 10.1016/0003-2697(76)90527-3. [PubMed] [Cross Ref]

Articles from BMC Microbiology are provided here courtesy of BioMed Central
PubReader format: click here to try


Save items

Related citations in PubMed

See reviews...See all...

Cited by other articles in PMC

See all...


  • Compound
    PubChem chemical compound records that cite the current articles. These references are taken from those provided on submitted PubChem chemical substance records. Multiple substance records may contribute to the PubChem compound record.
  • MedGen
    Related information in MedGen
  • Nucleotide
    Primary database (GenBank) nucleotide records reported in the current articles as well as Reference Sequences (RefSeqs) that include the articles as references.
  • Protein
    Protein translation features of primary database (GenBank) nucleotide records reported in the current articles as well as Reference Sequences (RefSeqs) that include the articles as references.
  • PubMed
    PubMed citations for these articles
  • Substance
    PubChem chemical substance records that cite the current articles. These references are taken from those provided on submitted PubChem chemical substance records.

Recent Activity

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

See more...