Logo of bmcgenoBioMed Centralsearchsubmit a manuscriptregisterthis articleBMC Genomics
BMC Genomics. 2009; 10: 347.
Published online Aug 1, 2009. doi:  10.1186/1471-2164-10-347
PMCID: PMC2907694

Comparison of next generation sequencing technologies for transcriptome characterization

Abstract

Background

We have developed a simulation approach to help determine the optimal mixture of sequencing methods for most complete and cost effective transcriptome sequencing. We compared simulation results for traditional capillary sequencing with "Next Generation" (NG) ultra high-throughput technologies. The simulation model was parameterized using mappings of 130,000 cDNA sequence reads to the Arabidopsis genome (NCBI Accession SRA008180.19). We also generated 454-GS20 sequences and de novo assemblies for the basal eudicot California poppy (Eschscholzia californica) and the magnoliid avocado (Persea americana) using a variety of methods for cDNA synthesis.

Results

The Arabidopsis reads tagged more than 15,000 genes, including new splice variants and extended UTR regions. Of the total 134,791 reads (13.8 MB), 119,518 (88.7%) mapped exactly to known exons, while 1,117 (0.8%) mapped to introns, 11,524 (8.6%) spanned annotated intron/exon boundaries, and 3,066 (2.3%) extended beyond the end of annotated UTRs. Sequence-based inference of relative gene expression levels correlated significantly with microarray data. As expected, NG sequencing of normalized libraries tagged more genes than non-normalized libraries, although non-normalized libraries yielded more full-length cDNA sequences. The Arabidopsis data were used to simulate additional rounds of NG and traditional EST sequencing, and various combinations of each. Our simulations suggest a combination of FLX and Solexa sequencing for optimal transcriptome coverage at modest cost. We have also developed ESTcalc http://fgp.huck.psu.edu/NG_Sims/ngsim.pl, an online webtool, which allows users to explore the results of this study by specifying individualized costs and sequencing characteristics.

Conclusion

NG sequencing technologies are a highly flexible set of platforms that can be scaled to suit different project goals. In terms of sequence coverage alone, the NG sequencing is a dramatic advance over capillary-based sequencing, but NG sequencing also presents significant challenges in assembly and sequence accuracy due to short read lengths, method-specific sequencing errors, and the absence of physical clones. These problems may be overcome by hybrid sequencing strategies using a mixture of sequencing methodologies, by new assemblers, and by sequencing more deeply. Sequencing and microarray outcomes from multiple experiments suggest that our simulator will be useful for guiding NG transcriptome sequencing projects in a wide range of organisms.

Background

Sequencing technology has made great advances over the last 30 years since the development of chain-terminating inhibitor-based technologies [1]. Traditional sequencing approaches require cloning of DNA fragments into bacterial vectors for amplification and sequencing of individual templates using vector-based primers. This approach was adapted for cDNA libraries [2] and, with the advent of capillary sequencing, became suitable for high-throughput sequencing of large samples of transcripts, termed Expressed Sequence Tags (ESTs). ESTs have become an invaluable resource for gene discovery, genome annotation, alternative splicing, SNP discovery, molecular markers for population analysis, and expression analysis in animal, plant, and microbial species [3]. Other approaches for analyzing transcriptomes include serial analysis of gene expression (SAGE) [4], massively parallel signature sequencing (MPSS) [5], and microarrays [6,7]. These approaches, which involve the sequencing or hybridizing of small concatamers of cDNA derived from mRNA by reverse transcription, have been used successfully in analyzing the expression of genomes (transcriptomes) at a very large scale, usually from species with a sequenced genome or an existing and extensive EST data set. Although several alternatives have been described since the emergence of EST sequencing projects, none has yet totally supplanted the use of bacterial vectors and Sanger sequencing.

In 2005, two new sequencing technologies were introduced both based on sequencing by synthesis, which promised to replace or enhance traditional sequencing methods. The 454 system http://www.454.com, using pyrosequencing technology [8], and the Solexa system http://www.illumina.com, which detects fluorescence signals [9]. Both execute millions of sequencing reactions in parallel, producing data at ultrahigh rates [10]. Although read lengths are much shorter with these new methods than with capillary sequencing (averaging 100–230 bp and 300–400 bp for 454FLX and 454Titanium, respectively, and 35 to up to 76 b for Illumina Solexa platforms), respectively, both platforms generate sufficient data to completely re-sequence bacterial genomes in a single run [8,11-13]. In the past year, Applied Biosystems has introduced their SOLiD sequencer http://www3.appliedbiosystems.com, another short-read 20–35 bp platform, with read lengths anticipated to be 50 bp in the upcoming SOLiD3 release. The three platforms offer a variety of experimental approaches for characterizing a transcriptome, including single-end and paired-end cDNA sequencing, tag profiling (3' end sequencing especially appropriate to estimating expression level), methylation assays, small RNA sequencing, sample tagging ("barcoding") to permit small subsample identification, and splice variant analyses. Several challenges face investigators hoping to use these methods, including the relatively large cost of most NG experiments and intense demands for data storage and analysis on the scale required for NG datasets, and rapidly evolving technologies. Initial studies reported success with 454 sequencing of chloroplast genomes [14,15], small RNAs [16-19], and transcriptomes of organisms with [20-22] or without [23] extensive genomic sequence information.

These Next Generation (NG) sequencing methods promise a cost-effective means of either deeply sampling or fully sequencing an organism's transcriptome, with even small experiments tagging a very large number of expressed genes. However, prior transcriptome sequencing studies have been largely exploratory, only hinting at the potential for NG transcriptome sequencing at different scales. There is a great need for quantitative studies and analysis tools that help investigators optimally design NG sequencing experiments to address specific goals.

A complete solution to this problem would involve realistic models for each technology, accounting for the cost of library generation and data collection, the characteristics of cDNA libraries, transcript abundance distributions, read length distributions, and the error rates in sequence generation and assembly. The present study focuses on the first four of these issues to provide estimates of theoretical coverage of complex transcriptomes with varying scales and types of DNA sequencing experiments. In earlier publications [24,25], we developed a robust simulation approach to model traditional capillary transcriptome sequencing, which incorporates distributions of the relative start site of cDNA sequences as a function of cDNA length, the read length distribution, and the transcript abundance distribution. We have now adapted this simulation approach to model the specific characteristics of NG sequencing. The results from this study should help researchers working with these new and exciting technologies.

The present study has several goals. First, we report empirical comparisons of 454 pyrosequencing and capillary-based transcriptome sequencing from the model plant, Arabidopsis thaliana, and two non-model plant species, the basal eudicot Eschscholzia californica (California poppy) and the magnoliid Persea americana (avocado). We use these results to examine the effects of library preparation procedures, specifically, normalized versus non-normalized and random versus oligo-dT primed libraries. We then introduce a simulation approach, based on the GS20 sequencing results, to predict the outcome of additional GS20 transcriptome sequencing experiments while accounting for critical features in cDNA library construction. We then use the GS20 simulation results to extrapolate results for 454FLX and Solexa platforms, in order to estimate technology-specific sequencing characteristics. Finally, we report on simulated experiments aimed at characterizing the optimal mixture of methods for most complete and cost-effective transcriptome sequencing with one or more sequencing technologies.

Results

Next Generation Transcriptome sequencing of Arabidopsis floral tissue

A half plate of GS20 sequencing from an Arabidopsis random-primed cDNA library generated 134,791 reads totalling 13.8 MB with an average length of 102.2 bp. The reads were assembled into 82,281 unigenes, which included 8,188 contigs with an average length of 147 bp and 74,093 singleton reads (Table (Table1).1). We mapped 122,344 (90.8%) reads to the TAIR 7 Arabidopsis genome annotation (Table (Table22 and see Methods). Of the total mapped reads, 88.7% were located within 15,539 genic regions and 2.1% were located in intergenic regions. Within the genic regions, 119,518 (88.7%) reads mapped exactly to known exons, while 1,117 (0.8%) and 11,524 (8.6%) reads mapped to introns and intron/exon boundaries, respectively. Also, 3,066 (2.3%) of the reads included in the genic regions extended current boundaries of known genes while 302 reads combined two annotated genes or marked areas of the genome with overlapping genes. There were 12,447 (6.7%) reads that did not have a significant BLASTn match to any location within the genome. There were 1,085 genes that had more than 20 reads per locus, and the 10 most highly expressed genes (Table (Table3),3), included two subunits of the photosynthetic protein RuBisCo, as well as TASTY, TGG1, and PDF1. These "top ten" transcripts had read counts ranging from 190 to 586 reads with the RuBisCO small subunit 1A being most highly represented. At this shallow sequencing depth, 2 non-overlapping contigs, with lengths of 357 and 240 bp, mapped to the RuBisCO small subunit 1A gene.

Table 1
Sequencing statistics of analyzed libraries.
Table 2
Arabidopsis 454 reads mapped to the annotated genome.
Table 3
Top 10 most frequently detected unigenes in 454 cDNA libraries of Arabidopsis, Eschscholzia, and Persea.

Despite low overall transcriptome coverage, one-half plate of Arabidopsis GS20 sequence data returned 27 fully sequenced cDNAs, as well as 292, 628, and 1008 genes at 90%, 80%, and 70% coverage, respectively. These results demonstrate that nominal amounts of 454 sequencing can generate complete or nearly complete sequences for an appreciable number of genes, especially those that are small and highly expressed. Another very promising result is the improved annotation of genes for both model and non-model species. For example, although the Arabidopsis genome has been largely sequenced since 2000 [26], the half plate of GS20 extended the untranslated regions (UTRs) of roughly 3,066 genes and mapped new transcript boundaries of 8,662 genic regions. These regions are possibly new splice variants of previously annotated genes. Finally, 2,826 transcripts were mapped to 2,096 unique intergenic regions. These transcripts might represent un-annotated protein-coding genes or non-coding RNA sequences that have not previously been sampled in traditional cDNA libaries.

Transcriptome sequencing of Eschscholzia californica using oligo-dT and random-primed libraries

Two full plates (over 559,000 total reads) of GS20 sequencing was performed on the emerging model basal eudicot, Eschscholzia californica [27,28], including one plate from a 454 library of oligo-dT primed cDNA and one plate from a 454 library of random hexamer-primed cDNA. The library of oligo-dT primed cDNA generated 251,716 reads totalling 24.9 MB with an average length of 98.9 bp. The reads assembled into 83,270 unigenes, including 18,339 contigs with an average length of 148.5 bp and 64,931 singletons (Table (Table1).1). The library of random-primed cDNA generated 307,836 reads totalling 30.2 MB with an average length of 98.2 bp. The reads assembled into 75,273 unigenes, including 14,242 contigs with an average length of 146.9 bp and 61,031 singleton reads (Table (Table1).1). Finally, we assembled both plates, which resulted in 120,585 unigenes, including 30,603 contigs with an average length of 157.0 bp and 89,892 singleton reads (Table (Table11).

As expected, the most obvious difference between the oligo-dT and random-primed cDNA sequences was the representation of rRNA genes. Additional rounds of mRNA purification, however, could have reduced the level of rRNA "contamination". We also examined the relative start positions of the reads from each library by mapping the reads to the proteome of Arabidopsis (Figure (Figure1A).1A). The relative start positions are defined as the start position of the best Arabidopsis HSP divided by the length of the best protein match. As expected, the oligo-dT library had a greater 3' bias than the random primed library. The unigenes from both libraries mapped to 6,498 unique Arabidopsis genes, with 4,066 of the transcripts found in both. The level of redundancy observed between these two plates (just 62.6%) suggests that many more genes would be discovered with additional sequencing.

Figure 1
Distributions of relative start sites and number of reads per gene. A. Start site distributions of 454 sequences for each species in this study including random, oligo-dT, and normalized oligo-dT libraries. Sequencing start sites are calculated as the ...

Transcriptome sequencing in a normalized library of Persea americana

One plate of GS20 sequencing was performed on a normalized library for Persea americana, an emerging model for the magnoliids [29]. The plate generated 298,055 reads totalling 29.8 MB with an average length of 100.1 bp. We then trimmed the adaptors used in the normalization step, which reduced the total number of reads to 269,057 with an average sequence length of 85.9 bp. Trimming the adaptors reduced the total amount of sequence by more than 6 MB, bringing the total to 23.1 MB. The reads assembled into 234,185 unigenes, including 22,303 contigs with an average length of 107.3 bp and 211,882 singleton reads (Table (Table11).

To determine the success of the normalization step, we plotted the relative frequency of the number of reads per gene, using Arabidopsis as a reference (Figure (Figure1B).1B). Compared to the other library methods used in this study, the normalized Persea library (solid blue line) contained the largest number of genes with fewer than five reads per gene and the fewest number of genes with more than 5 reads per gene. The gene with the highest number of mapped reads was a protein phosphatase with 37 reads. In contrast, the most highly represented genes in the poppy non-normalized libraries had over 1000 reads mapping to specific Arabidopsis genes. Hence, the normalization step was successful. Note that the Persea library, constructed using the Trimmer-Direct Kit (Evrogen) with amplification of full-length cDNAs (Clontech's SMART technology), also has the least amount of 3' bias in read start positions (Figure (Figure1A1A).

Correlation of observed Arabidopsis transcript frequencies with microarray data

Of the 21,707 genes included on the Arabidopsis Affymetrix (AFFY) microarray, 13,790 had at least one read mapped to its cDNA sequence. For these genes, we used AFFY microarray expression values generated from inflorescence tissue in the same A. thaliana ecotype [30] to compare with the number of 454 reads for each gene. The comparison revealed that 1,907 genes that were detected above normalized expression level 50 with the AFFY chip were not detected in the 454 sequences, while 1,375 genes were detected in 454 reads, but were below expression level 50 with AFFY data (a common cutoff for reliable detection with the AFFY system). An additional 1,717 genes detected by 454 reads were not included as probes on the AFFY gene chip. A moderate correlation was observed between microarray expression values and number of 454 reads (Figure (Figure22 with r = 0.67, r2 = 0.444, p < 0.0001).

Figure 2
Correlation of gene expression with number of transcripts. Linear Regression comparing number of 454 reads with Affymetrix (AFFY) gene chip expression values for Arabidopsis young inflorescence. Each symbol represents a single gene, with many genes having ...

Next Generation transcriptome simulation study

A primary goal of large-scale transcriptome sequencing is to identify and obtain full-length sequences of all of the expressed genes in an organism or tissue. A researcher will typically begin with RNAs isolated from a tissue of interest or a collection of tissues from the entire organism. The researcher may use tissue from a particular developmental stage or assay gene expression under a range of experimental conditions (e.g., light/temperature/water/nutrient stress, gene knock out). Each of the new NG technologies (e.g., 454-GS20/FLX, Solexa) produces data with characteristics that can be evaluated and compared to each other and traditional capillary sequencing.

In order to predict the expected outcomes of varied amounts of sequencing effort using a blend of technologies, we developed a predictive model based on the simulation engine of ESTstat [24,25]. Inputs to the model include four distribution profiles that reflect information about the cDNA library or sequencing technology: 1) the transcript abundance profile, a transcriptome-specific frequency distribution of the number of tags of different genes in the entire transcriptome, 2) the distribution of cDNA lengths 3) the distribution of sequencing start sites, and 4) the distribution of read lengths after removal of vector and low quality data. The first three of these reflect library specific features, while the fourth is mostly dependent upon the sequencing technology. The ESTstat simulation model has been tested under a variety of situations and found to robustly predict the outcomes of future sequencing experiments. Although ESTstat can estimate and correct assembly errors in silico without reference to a known genome sequence, we were able to map each read to its known location on the Arabidopsis genome to assess and correct assembly error.

We used the results from our GS20 sequencing to simulate different levels of sequencing coverage for each of the NG and capillary technologies. For each technology, we considered both non-normalized and perfectly normalized libraries, in which the expression level of every gene is made identical. Actual normalization experiments should therefore fall somewhere between non-normalized and perfectly normalized, depending on the normalization method, RNA quality, and success of the normalization procedure (see Materials and Methods for more detail). We used the following parameters to help evaluate the different sequencing platforms: transcriptome coverage, percentage of all expressed genes that were tagged, percentage of singletons, number of unigenes, mean unigene length, and the percentage of all expressed genes that were sequenced completely (i.e. 100% covered; Figures 3A, 3B, 3C, 3D, 3E, and and3F3F).

Figure 3
Simulation results for different Next Generation sequencing technologies. Simulation results illustrating predicted outcomes for different transcriptome sequencing technologies with a complex library expressing ca. 18,000 genes. Left column illustrates ...

Transcriptome coverage (Figure (Figure3A)3A) is a direct indicator of the sequencing depth and breadth of sequence data relative to the sample transcriptome. We define the transcriptome coverage as the total non-redundant number of bases from sampled genes that are included in at least one EST, divided by the sum of cDNA lengths for all expressed genes (including both detected and undetected genes in the transcriptome). In this study, the 15,276 detected genes and randomly sampled 3,007 undetected genes (estimated using ESTstat, see Materials and Methods) sum to 18,283 genes, with an expected total cDNA length of 29.8 MB. The transcriptome coverage, as a function of the total number of sequenced bases (MB), differs only slightly for all technologies. However, when the amount of sequence is low (1–500 MB), the transcriptome coverage is greater in the normalized libraries (dashed lines) compared to the non-normalized libraries (solid lines) for each technology. Theoretically, perfect normalization will equalize the level of expression for all genes, without any other impact on library quality, and thus will increase the coverage of genes that are randomly sampled. Using the distributions of cDNA length, read length, and sequencing start sites obtained in these experiments, we estimate that traditional 5' capillary sequencing of a non-normalized library will cover approximately 14%, 52%, and 82% of the transcriptome with 6.25, 50, and 200 MB of sequencing, respectively. For a normalized library, the percentage increases to 18%, 69%, and 95% with the same amounts of sequence. The same pattern was observed for the NG technologies but with higher levels of transcriptome coverage. For example, the GS20 technology is estimated to cover 15%, 54%, and 88% of the transcriptome for a non-normalized library and 18.2%, 72%, and 98% of the transcriptome for a normalized library at 6.25, 50, and 200 MB of sequencing. The lower coverage of capillary-based EST sequencing given the same number of sequenced bases is attributed to biases implicit in the cDNA cloning process. The FLX is estimated to cover 15%, 54%, and 88% for the non-normalized library and 18%, 72%, 98% for a normalized library at the same intervals. Finally, the Solexa platform is estimated to cover 55% and 87% for the non-normalized library and 75% and 98% for the normalized library for 50 and 200 MB, respectively. Given that one plate of sequence data from the Solexa platform is estimated at 1,000 MB, we chose 50 MB (1/20 of a plate) as the first interval to be simulated, and we excluded all intervals less than 50 MB.

Transcriptome coverage differs substantially among the various technologies at the same cost. However, the cost used in this analysis refers only to the actual sequencing costs and not the pre-processing costs such as library preparation and normalization. The Solexa platform rapidly approaches 100% coverage primarily because the cost of sequencing is substantially smaller per MB (simulations for Solexa were based on $4000/plate at 1,000 MB/plate). Solexa is followed by GS20, FLX, and conventional EST sequences. It is estimated that traditional capillary sequencing would reach 100% transcriptome coverage at more than 200 MB and at a cost of over $200,000. While Solexa sequencing is the most economical technology for deep coverage of transcriptomes, de novo assembly of short Solexa sequences for non-model species remains an unresolved challenge.

A second indicator of the depth of transcriptome sequencing is the percentage of genes tagged (Figure (Figure3B).3B). A gene is considered tagged if it has been sampled with at least one read. The percentage of genes tagged increases with both amount of sequencing and price. For a non-normalized traditional library, we estimate that 27%, 75%, and 96% of the genes will be tagged in our sample transcriptome with 6.25, 50, and 200 MB of sequencing. For a normalized library, the percentage increases to 39%, 98%, and 100% with the same amounts of sequence. As expected, this percentage increases when the sequencing is done with any of the NG technologies. The cost of gene tagging also differs substantially among the various sequencing technologies. The Solexa platform tags essentially 100% of the expressed genes with less than one plate of sequence ($4000). Solexa is followed by GS20, FLX, and conventional EST sequences. Capillary sequencing would approach 100% genes tagged at more than 200 MB and over $200,000.

The number of unigenes (Figure (Figure3C)3C) – including singletons and contigs – has typically been used to estimate the number of transcribed genes in a tissue. With small amounts of sequencing, the number of unigenes is similar to the number of sequences, but with more sequencing multiple reads are observed for each gene (increasing redundancy), and the rate of discovery for new genes falls off. At a particular point in the sequencing process (peaks in Figure Figure3C),3C), the number of unigenes will begin to decrease as disconnected reads coalesce into contigs covering entire genes, and eventually the unigene number approaches the number of genes expressed in the library. The rate at which multiple reads for a gene coalesce into a single contig is a function of read length. With the capillary technology, each read is large compared to the NG reads. With a non-normalized library similar to the model library, we will reach the peak unigene number at more than 200 MB of sequencing. With a normalized library, we reach the peak at approximately 100 MB and decrease gradually with an additional 100 MB of sequence. However, we still do not reach the estimated 18,000 genes expressed in the Arabidopsis floral library. For the FLX technology, the maximum number of unigenes occurs at roughly 100 MB and 50 MB for the non-normalized and normalized libraries, respectively. However, because the FLX sequences are two to three times shorter than the traditional sequences, the peak is reached with roughly double the number of unigenes (38,000 and 46,000, respectively). For the GS20 platform, the peaks occur at nearly the same levels (approximately 100 MB) as the FLX platform, but since these reads are half as long as FLX reads, the GS20 produces more than twice the number of unigenes (92,000 and 115,000) for both library types. The Solexa platform produces many more unigenes at all levels of sequencing and the peak occurs at approximately 200 MB for both library types (1.3 and 1.7 million reads).

The mean unigene length (Figure (Figure3D)3D) is an important statistic if the goal of the transcriptome sequences is to perform multi-gene phylogenetic or molecular evolutionary analyses. In this case, researchers would like full-length sequences for many expressed genes, not just small fragments of expressed genes. In the Arabidopsis genome, the average transcript length is approximately 1,500 bp (1,436 for all transcripts and 1,628 bp for only the transcripts predicted to be expressed in this library). Therefore, a researcher would like to sequence enough of a library to produce contiguous sequences with average lengths of all genes in the library. We calculated the unigene length in two different ways. First, we used the mean length of all unigenes, although this estimate lowers the mean length for the shorter sequences in the NG technologies. Second, we calculated the mean length of only the longest unigenes for each gene (Figure (Figure3D).3D). All NG technology and library type combinations require greater depth of sequencing to reach the same level as its traditional counterpart. When we examine the mean unigene length in relation to price, the traditional sequencing produces the longest unigenes until approximately $5,000 worth of sequencing. This is approximately 4–5 MB of capillary sequencing and 6,000–8,000 reads. At this point, the NG technologies begin to generate enough sequences to assemble longer unigenes at a lower cost.

The percentage of singleton reads (Figure (Figure3E)3E) reflects sequencing depth and the likelihood that a given read will assemble to form a contig with other reads. A singleton is defined as a single read that does not contain enough overlap in length to be combined with other reads from the same transcribed gene. The percentage of singletons is also inversely proportional to the levels of redundancy in the library. Therefore, additional sequencing usually reduces the percentage of singletons. This is the case for capillary sequencing, where the percentages of singletons are 73%, 40%, and 16% for non-normalized and 81%, 23%, and 4% for normalized libraries at the 6.25, 50, and 200 MB levels, respectively. For the GS20, these values change to 76%, 48%, and 25% for non-normalized libraries and 80%, 34%, and 7% for normalized libraries at the same levels. For the FLX, the percentage of singletons changes to 74%, 44%, and 22% for non-normalized and to 78%, 29%, and 5% for normalized libraries at the same levels. Finally, for Solexa, the percentage of singletons is predicted to be around 68%, 47%, and 25% for non-normalized and 67%, 32%, and 7% for normalized libraries at the 50, 200, and 1000 MB sequence intervals, respectively.

The final parameter used to evaluate and compare the technologies is the percentage of genes with 100% coverage (Figure (Figure3F).3F). As with mean unigene length, gene coverage can be calculated using all of the unigenes per gene, or by using only the longest unigene. The smaller reads from the NG technologies might cover all the regions within a gene. However, many of the reads for a gene will not have sufficient overlap to assemble into a contiguous sequence. Although we calculated both estimates, we use the percentage of gene coverage based on the longest unigene for comparisons to other platforms. In relation to amount of sequencing (MB), the capillary, GS20, and FLX technologies have similar percentages. The Solexa platform requires more data (MB of sequencing) to fully sequence a similar number of genes. For example, the FLX generates unigenes that completely cover roughly 18% and 58% of the total genes with 200 MB and 1000 MB of sequence data. The same amounts of Solexa sequencing would fully sequence 4% and 25% of the genes. However, the FLX experiment would cost approximately $18,000 and $90,000, whereas the Solexa data could be generated for roughly $800 and $4,000. Finally, with capillary sequencing, 200 MB would need to be sequenced at $250K to fully cover 25% of the genes.

Combinations of traditional and NG sequencing

Analyses of genome sequencing projects suggest that optimal genome assemblies can be obtained through a combination of traditional and NG technologies [11]. In order to investigate the combination of these new technologies for transcriptome sequencing, we examined the addition of NG sequences to traditional capillary sequences (Figures 3A, 3B, and and3C)3C) and the combinations of NG sequences alone (Figures 3D, 3E, and and3F).3F). All of the indicators from the previous section dramatically improved with the addition of small amounts of NG sequences. Among the various combinations of technologies, there is little difference in most of the indicators used in the previous section. For example, the percentage of genes tagged approaches 100% with very small amounts of NG sequences. Therefore, to evaluate the various combinations of technologies, we compared three of the statistics described above: mean unigene length, transcriptome coverage, and percent of genes 100% covered.

The addition of NG sequences to traditional capillary sequences increased each of these three indicators at most sequence increments (Figures 4A, 4B, and and4C).4C). Only the addition of one plate of Solexa and all GS20 plate increments decreased the mean unigene length (Figure (Figure4A).4A). The addition of four plates of FLX increased the mean unigene length to 1327 and 1380 bp with 3.25 and 50 MB and of traditional sequences, respectively. At these same increments, transcriptome coverage would increase from 94% to 95% (Figure (Figure4B),4B), while the percent of genes 100% covered would increase from 33% to 38% (Figure (Figure4C).4C). The addition of this amount of FLX would increase the total cost of sequencing from $40K to $102,000. However, sequencing only four plates of FLX, assuming perfect assembly, could in theory generate 1323-bp unigenes at under $40,000, with approximately 94% transcriptome coverage and covering 37% of the genes 100% covered. Adding four plates of Solexa to four plates of FLX would generate 1466 bp unigenes at just over $50,000 (Figure (Figure4D).4D). This amount of sequencing would cover 100% of the transcriptome (Figure (Figure4E)4E) and fully sequence 84% of the genes (Figure (Figure4F).4F). Under these conditions, the primary advantage of including Sanger sequences would be the improvement of assembly through the inclusion of long individual reads, and simplification of downstream experiments with physical clones.

Figure 4
Simulation results for combinations of Next Generation sequencing technologies. Illustrating predicted outcomes from combined sequencing technologies with a complex library expressing ca. 18,000 genes. A-C) Combinations include 3.125, 12.5, or 50 MB 5' ...

ESTcalc: A simulation calculator for NG transcriptome sequencing experiments http://fgp.huck.psu.edu/NG_Sims/ngsim.pl

With sequencing technologies rapidly advancing, researchers will wish to predict the cost and potential outcomes of diverse transcriptome sequencing projects under a wide range of initial assumptions. We have constructed ESTcalc, an online webtool, which allows users to explore the results of this study by specifying individualized costs and sequencing characteristics. Users can choose a single sequencing method (5' Sanger sequencing, GS20, GSFLX, or Solexa), perfectly normalized or non-normalized libraries, and varied amounts of sequencing and read lengths to predict many of the same parameters used in this study. User-defined costs can include both fixed (e.g., cost of obtaining libraries) and per unit sequencing costs, with default costs the same as used in our study. ESTcalc will extrapolate from the closest treatments examined in our simulation study, and give outcomes such as the project cost, predicted number of unigenes, unigene length, transcriptome coverage, and related statistics presented earlier in this study. Combinations of sequencing strategies, such as normalized plus non-normalized libraries, or combinations of different technologies, can also be examined under the same range of combinations used in our study. Additional combinations, including parameter sets for SOLiD sequencing, will be added to ESTcalc as they are obtained in ongoing data analyses.

Discussion

Next Generation transcriptome sequencing

Next Generation sequencing has great potential for accurate transcriptome characterization because of the large amount of data obtained at considerably lower costs compared to traditional methods. Although the cost of traditional sequencing (over $1000/MB) has continued to decrease over the last decade, the lower cost of NG sequencing ($250/MB for GS20, $90/MB for FLX, and $5/MB for Solexa) will dramatically improve transcriptome sequencing in future research. The overall yield and value of NG sequencing is evident in the amount of sequence data obtained in each run. We identified a large number of uniquely tagged gene sequences in each of our three cDNA libraries (Arabidopsis, poppy, and Persea). With only a small amount of sequencing (one-half plate on the GS20) in Arabidopsis, we tagged more than 15,000 genes and completely or nearly completely sequenced several hundred of the highly expressed genes. Even with a very modest amount of data by NG sequencing standards, many of these sequences extended the annotated untranslated regions (UTRs) and redefined intron/exon boundaries, including evidence of alternative splicing. We also identified more than 2,000 transcripts that were not previously annotated in the Arabidopsis genome. These may define new genes or transcribed non-coding regions such as miRNA or other small RNA. In any event, these results illustrate the utility of NG transcriptome sequencing for genome annotation.

Our data were limited to Arabidopsis inflorescence, and there are likely to be differences in experimental outcomes using different organisms and tissue. To assess the similarity of the Arabidopsis inflorescence transcriptome with other transcriptomes, we considered the distribution of intensities of the perfect match probes from several Affymetrix experiments involving various tissues and organisms. We examined data from Arabidopsis inflorescence, leaf, and root on ATH1 arrays [30], human skeletal muscle [31] on the hgu95av2 array, Caenorhabditis elegans (whole worm) [32] on the C. elegans array, Drosophila melanogaster (whole fly) [33], and Saccharomyces cerevisiae (yeast) on ammonium sulfite nitrogen source [34]. Small differences are observed in the expression profiles, consistent with some samples having different proportions of genes expressed more or less highly, but overall, the distribution of expression intensities is very similar for all of the samples (Figure (Figure5A).5A). These differences among samples are on the same scale, and sometimes smaller than, the variations seen among replicate samples from Arabidopsis inflorescence. Because the tissue-specific expression profile is the one method-independent input to the simulation model, we can expect similar predictions for transcriptomes from different sources.

Figure 5
Probe expression distributions and relative uniqueness of varying x-mer sizes. A. Probe expression distribution for different tissues of Arabidopsis and various other species, as indicated. Data shown are the smoothed histograms of the log2 (perfect match ...

NG sequencing simulation studies and comparisons of platforms

Simulation studies help researchers predict outcomes of expensive or time consuming experiments that cannot be readily performed in the near term. For transcriptome sequencing, simulation studies have allowed researchers to conduct in silico experiments of systems that would be costly and time-consuming to do in the lab. We have developed a simulation approach to understand the advantages of each of the NG technologies in comparison with traditional capillary sequencing. Although all technologies eventually converge at similar points with regard to unigene length, transcriptome coverage, and percentage of genes fully sequenced (1,444 bp, 18,283 genes, and 100% for Arabidopsis), the NG technologies offer huge advances, most notably in the amount of sequence generated at considerably lower costs. Even though small NG experiments will tag a very large fraction of the transcriptome, it will commonly be in the form of thousands of disconnected fragments of genes, with relatively few full-length cDNAs. Thus, NG technologies are very effective for tagging sequences from fully sequenced species. However, researchers sequencing transcripts from novel species with few genomic resources or from species that are evolutionarily distant from a sequenced model organism might face several challenges when evaluating the data. The problems might become amplified with 25–30 bp reads generated by the Solexa system or other short-read platforms. The benefits of normalization are most evident in traditional sequencing, although some benefits, which include longer unigenes, are apparent in the NG technologies. However, the cost of normalization, and the potential for loss of closely related genes from the dataset, might outweigh the potential benefits.

Although NG sequencing does outperform traditional sequencing in many areas, the problems in assembly cannot be underestimated. Solexa and SOLiD sequences, currently less than 40 bp, will pose problems in assembly of unigenes, especially for short segments of genes that may be present in several genes. For example, only 81.7% of 15-mers are unique in the Populus transcriptome (PTR, Figure Figure5B).5B). This leaves nearly 7 million 15-mers not unique to the Populus transcriptome, including 43,069 15-mers that are present in at least 10 different genes (results not shown). Until methods are developed to deal with this large fraction of sequence fragments that might lead to mis-assembled unigenes, researchers will not be able to use the Solexa or SOLiD technologies alone for transcriptome sequencing in non-model species. Research into genome assembly strategies with these short sequences with and without a reference genome is currently under investigation [35-37] and will hopefully become part of transcriptome assembly. The addition of Solexa sequences to longer NG sequences or traditional capillary sequences should help assemble larger unigenes. These longer sequences will have a much higher confidence in their uniqueness. The combination of technologies for transcriptome sequencing is analogous to genome shotgun sequencing which uses varying sizes of clones.

In order to evaluate the robustness of our simulator to both different organisms and tissues, we compared our simulated results against the poppy and avocado transcriptomes generated for this study and against two recently published 454 transcriptomes [22,23]. Vera et al. (2007) performed de novo assembly of 454-transcriptome sequences in the butterfly Melitaea cinxia. The RNAs were isolated from a genetically diverse pool of larvae, pupae, and adults. The authors sequenced two plates of GS20, and after trimming and cleaning, there were 518,079 reads (approximately 50 MB) with an average length of 110 bp. The reads assembled into 108,297 unigenes that included 59,945 singleton reads (55.4% singletons). The mean unigene length of 149 bp is the summation of 197 bp for all contigs plus the 110 bp average for the singleton reads. From our simulation results, we would predict roughly 91,000 unigenes, 48% singletons, and an average unigene length of 177 bp. Weber et. al sequenced 2 GS20 plates of cDNA derived from aboveground tissues of 8-day old light-grown Arabidopsis seedlings. The reads tagged an estimated 17,499 cDNAs, which is nearly identical to what our simulations would predict for that amount of GS20 data. For poppy, each of the observed assembly characteristics (Table (Table1)1) are very close to the predicted values for this amount of GS20 sequence. For example, the average unigene numbers for each of the poppy libraries are 83,370 and 75,273, which are very close to the estimated 76,000 unigenes from the simulation. For avocado, the observed number of unigenes and percent singletons (234,000 and 90%) is considerably larger than predicted for a normalized library sequenced to this depth. We do not know if this unexpected large number of unigenes in avocado is due to a larger underlying transcriptome size, sequence error causing false misassembly [25], or some other unknown factor. For each of these comparisons, we applied the distributions of read lengths, sequence start sites, and transcript abundance frequencies previously observed from Arabidopsis. Therefore, although we have not actually fine-tuned these specific outcomes with the true (and unknown) transcript distribution profiles for each of species and tissue, the observed outcomes are very close to the model predictions. This is particularly true when considering the above uncertainties associated with de novo assembly, differences in tissue sources, and technical variation that may be expected from run to run.

Analysis of gene expression by NG sequencing

NG sequencing is potentially a direct and cost-effective way to obtain genome scale expression information from organisms that lack a genome sequence and comprehensive microarray platform. Digital expression data obtained by direct sequencing is not dependent on gene models, comprehensive genome data, or understanding of alternative splice forms. The half plate of GS20 sequencing in Arabidopsis showed a moderate correlation (r = 0.67, r2 = 0.444, p < 0.0001) between the number of reads and microarray expression values generated from the same tissue and ecotype. Solexa and SOLiD have the potential to increase this correlation, since with millions of sequence reads per experiment, they will ultimately have a large dynamic range similar to traditional microarray experiments. Correct mapping to specific genes may be problematic for short Solexa or SOLiD reads (Figure (Figure5B),5B), when no genome sequence is available. Enriching for 3' UTRs, however, should improve assignment accuracy and increase efficiency of massively parallel sequencing for assessing gene expression levels [38,39]. In research on an organism without a sequenced genome, the value-added expression evidence could be very important in the early stages of developing its transcriptome, an advantage for GS20 or FLX NG technologies. Even in organisms that have comprehensive microarrays, the probe designs are usually dependent on and built with information from early genome assemblies. For example, the current Arabidopsis Affymetrix ATh1 array [40,41] contains probes for approximately 22,000 genes, approximately 5000–6000 genes fewer than the current annotation.

NG sequencing can be scaled to suit different project goals

NG sequencing technologies are a highly flexible set of platforms that can be used alone or in combination to best suit the research at hand. Small-scale experiments (e.g., 1/16 – 1 plate) provide a wealth of information including the tagging of many or most expressed genes, microsatellite markers, full-length sequencing of highly expressed genes, and modest expression level information. Since there can be multiple lanes in NG plates (up to 16), and multiple bar-coded libraries can be sequenced on a single plate, researchers might fully sequence a small number of highly expressed genes with very little cost or time investment. Low-copy, highly expressed genes might be quite useful for phylogenetic analysis or markers for population level studies. Even small-scale experiments will tag a large fraction of genes in a transcriptome. These tags can be used for building microarray probes [23] and enhancing microarray design. Small studies might sequence the highly expressed genes from many different tissues in the same sequencing runs without the need for bar-coding. Small experiments might also be sufficient to provide rich information for genome annotations in pre-draft and early draft forms. For example, a single run plate will tag nearly every transcribed gene and help identify UTR and intron/exon boundaries. However, experiments on this scale sample only a small fraction of the actual transcriptome and the assembly is often in many small pieces. Moderate transcriptome studies (e.g., 2–5 plates) have the potential to sequence more than 50% of the transcriptome. They will provide small annotation datasets, identify new genes in an organism, further extend genic regions, and help with alternative splicing, especially in sequenced genomes. With deeper sequencing (e.g. 6–20 plates), researchers attain a level of transcriptome that has never been possible before due to the higher cost of earlier technologies. Not only will these studies sequence more than 90% of the transcriptome, the coverage per gene will approach traditional sequencing. This should allow researchers to use these genes to identify pathways, determine tissue-specific expression for lowly expressed genes, and will be critical for genome annotation.

Conclusion

NG technologies are revolutionizing EST sequencing and applications that revolve around gene expression. Another important consideration in NG transcriptome sequencing is the efficiency and flexibility in library construction. NG library construction costs less, takes less time, and does not produce physical clones that must be stored. If the goal is sequencing full-length genes, non-normalized libraries will yield a larger number of full-length sequences in small sequencing experiments compared to normalized libraries. As sequencing quantities increase, this relationship reverses, and normalized libraries will capture more full-length cDNA sequences. There is also a trade-off in the cost of normalization versus the cost of sequencing. We have shown the feasibility of using a simulation approach to quantitatively evaluate the different platforms and the various combinations of platforms. Currently, the low per-base cost of Solexa sequencing suggests that it may be the most efficient method of transcriptome characterization for sequenced genomes (e.g. Figure Figure3),3), but in the absence of a reference genome, the problem of de novo assembly of the short Solexa reads has not yet been resolved. Under these circumstances, a blend of Solexa and GS-FLX sequencing may be optimal (Figure (Figure44).

This is the first simulation study to address some of the technology-specific characteristics found in several NG sequencing technologies. Our approach focuses on the critical questions of data production and coverage, which differ dramatically between methods and experimental scales. By extrapolating the results of the GS20 simulations, we are able to predict outcomes with various NG methods and combinations. ESTcalc allows a variety of assumptions to be explored that will be relevant to different experimental designs with current and future transcriptome sequencing technologies. Although ESTcalc and the underlying simulations do not currently incorporate explicit models of sequencing and assembly errors, the results provide a null hypothesis of predicted outcomes with theoretically perfect sequence data and no assembly error. Deviations from these values in real transcriptome datasets and assemblies will reflect the magnitude of these errors and potential contamination of transcriptome libraries with genomic DNA. These factors will tend to inflate the number of singleton reads relative to the predicted numbers without such errors; their evaluation will aid in sequence cleaning and assembly experiments. A next step will be to develop realistic models of error in sequencing and assembly, and to provide tools to allow any sets of assumptions about read length and cost to be examined. Future studies should be able to build upon this first simulation study, while accounting for additional issues in transcriptome sequencing and assembly experiments.

Methods

RNA preparation

Arabidopsis thaliana (cv: Landsberg) plants used in this study were grown in a culture chamber at 23 temp and 40% humidity with 18 hours light/6 hours dark. RNA isolation from Arabidopsis plants was performed with the RNA Aqueous-Midi kit (Ambion, Inc; catalog: #1911) following the manufacturer's recommendations with modifications as previously reported [27]. California poppy total RNA was prepared from pre-meiotic flower buds using TRIzol reagent (Invitrogen) according to the manufacturer's recommendations. Stages of flower development were defined as described previously [42]. RNA quality and quantity were checked using a Bioanalyzer (Agilent, inc). Persea americana pre-meiotic flower buds (Stages 6–7), in which all floral organs are present but stamens and carpels are immature [43], were collected from a tree cultivated on the Gainesville campus of the University of Florida (Kim 1135; voucher deposited at FLAS). Total RNA was isolated using a combination of the CTAB DNA extraction protocol [44] and the RNeasy Plant Mini kit (Qiagen) as previously described for basal angiosperms [45]. RNA integrity was verified with a Bioanalyzer (Agilent Inc.).

mRNA purification and 454 library construction for Arabidopsis thaliana and Eschscholzia californica

Messenger RNA was extracted from total RNA using Poly(A)Purist™ mRNA Purification Kit (Ambion, Inc., catalog # 1916) according to the manufacturer's recommendation. mRNA quality was checked with a Bioanalyzer (Agilent, Inc). cDNAs were prepared using the ZAP-cDNA® Synthesis Kit (Stratagene) according to manufacturer's instructions, except that 2 micrograms of mRNA was used rather than the recommended 5 ug. For Arabidopsis, two cDNAs were prepared, the first by oligo-dT priming and the second using the random hexamer primers provided in the kit. For California poppy, only random hexamer priming was used to prepare ds cDNA. 454 libraries were constructed from the cDNAs and sequenced using the approach described by [8]. One half plate, one, and two plates were sequenced from Arabidopsis, Persea, and California poppy, respectively, using the 454-G20 sequencer according to manufacturers protocols (Roche, Inc).

Normalized cDNA library construction in Persea americana

Messenger RNA was isolated from 250 ug total RNA using the Poly(A)Purist™ mRNA Purification Kit (Ambion, Inc., catalog # 1916) according to the manufacturer's protocol. Approximately 1 ug high quality mRNA, verified through Bioanalyzer as above, was used to construct a normalized cDNA library using the Trimmer-Direct Kit (Evrogen), which combines a modification of SMART cDNA preparation [46] with DSN-normalization technology [47]. Specifically, first strand cDNA was reverse transcribed using a 3' adapter (CDS-3M; Evrogen) that anneals to poly(A) RNA tails and a second adaptor, BD SMART™ Oligo IV (Clontech), that anneals to the 5' dC tails created by MMLV reverse transcriptase, and serves as an extended template for the first strand synthesis. Double-stranded cDNA was synthesized and simultaneously amplified with the BD SMART™ 5' PCR Primer (Clontech) that anneals to both adaptors through 13 PCR cycles of 95°C for 7 sec; 66°C for 30 sec; 72°C for 6 min on a BioRad thermocycler. Approximately 1.2 ug of double stranded cDNA was purified with the Wizard PCR Purification Kit (Promega) followed by ethanol precipitation, and normalized according to the Trimmer-Direct protocol. Normalized cDNA was subjected to two rounds of single primer PCR amplifications exploiting the complementarity of the cDNA ends (primer sites) to suppress short fragment amplification [48] and enrich the cDNA pool with full length transcripts. The first PCR amplification was conducted for 18 cycles of 95°C for 7 sec; 65°C for 20 sec; 72°C for 6 min. First amplification products with efficient normalization were diluted 10-fold and subjected to 12 PCR cycles of 95°C for 7 sec; 64°C for 20 sec; 72°C for 4 min. Approximately 20 ug of normalized amplified cDNA were thus obtained.

Sequence analysis

All of the sff files have been deposited into the Short Read Archive at NCBI with the accession SRA008180.19. 454 reads for all species were assembled using the 454 Newbler Assembler [8]. Using the program seqclean http://compbio.dfci.harvard.edu/tgi/software/, we vector trimmed and quality trimmed both the original read files and the contig files generated by the Newbler assembler. We parsed the 454 ReadStatus.txt file to determine the singleton reads, which did not assemble with any other reads. For each library, we used then the contig and singleton files to generate a unigene file. Finally, we calculated the number of sequences, the mean length of all sequences, and the total MB for each of the 4 file types (read, contig, singleton, and unigene). We also performed an additional assembly step using cap3 with 95% identity and 30 bp overlap (default for all other parameters).

Genome mappings for Arabidopsis were determined using the best BLASTn [49] match of each individual read versus the TAIR7 genome annotation. We wrote Perl scripts to parse the TAIR xml files containing chromosome locations for all genes in the current annotation. We assigned the following categories to each read: Exon, intron, intron/exon, extended UTR, overlapping genes, intergenic, or no hit. All reads mapping to known gene locations were also mapped to the TAIR cDNA dataset. We calculated the start and stop positions for all reads on each cDNA and determined the reads/gene distribution based on all Arabidopsis genes tagged.

In order to evaluate the sequences from the three libraries without a sequenced genome, we used BLASTx and BLASTn searches against the TAIR protein and cDNA datasets, respectively. We parsed the BLAST output to determine the location and e-value to the best Arabidopsis gene. For each best hit, we also determined the length of the protein and/or cDNA, as well as the annotation of the gene. We used the length of the read, the start and stop locations on the gene, and the length of the best hit to calculate each Arabidopsis gene's percent coverage. Gene coverage is defined as the number of bases or amino acids covered by at least 1 read divided by the length of the gene. We estimated the gene coverage using both relaxed and strict definitions. For the relaxed definition, we considered all reads or contigs mapped to a gene, thus allowing for a non-contiguous definition of the gene's coverage. In the strict case, we only considered the longest unigene or read mapped to an individual gene. Please see Additional file 1 for detailed blast results of each dataset used in this study.

Simulation studies

Using a half plate of GS20 sequences, we developed an approach to simulate additional rounds of sequencing in silico as follows. We mapped 118,485 reads to 15,276 genes in the TAIR cDNA dataset using the similarity search program BLASTn. We selected the best high scoring pair (HSP) for each read and its corresponding cDNA. Since there are multiple versions of loci for 3,156 genes, we used the version for each gene with the largest number of reads mapped to its sequence. Using this approach, we created the following distributions: Read length, read count, and cDNA start site distributions. The read length distribution is comprised of all read lengths sampled. The read count distribution contains the number of reads mapped to each gene. For example, the distribution contained 3149, 2238, and 1672 genes with 1, 2, and 3 reads/gene respectively. The most highly expressed gene (AT1G67090, see Table Table3)3) had 586 reads, or about 0.5% of total reads.

We then estimated 3,007 zero class genes by providing the reads/gene profile to the program ESTstat [25]. Zero class genes are defined as genes that have not been sampled (sequenced) but are presumed to be present in the library, but typically expressed at low levels. Failure to account for these genes would bias many of the simulation estimates. We then randomly sampled the zero class genes from the remaining genes not originally sampled. The addition of the zero class genes to the 15,276 transcribed genes totalled 18,283 genes. For the simulation, we used the number of reads per gene distribution to randomly select reads from particular genes based on the number of times they were sequenced. For example, genes that were sequenced only once had a much lower chance of being selected for a plate of simulated reads than genes represented by hundreds or thousands of reads. Finally, we collected all the start sites for each read against its corresponding cDNA to generate a start site distribution. Based on previous work [24,25], we assumed that start sites are dependent on gene length. Based on the quartiles of the Arabidopsis cDNA lengths, we grouped the start sites into four groups: 1) 1–1000 bp, 2) 1001–1500 bp, 3) 1501–2000 bp, and 4) greater than 2000 bp. Using the gene length, we created relative start site distributions dependent on gene length.

The four libraries used in this study were all sequenced using a GS20 machine. In order to compare the GS20 technology to other NG technologies, we also simulated FLX, Solexa, and traditional capillary sequences. For FLX, we used all of the same distributions for the GS20 simulation, except the read length distribution. Since the average read length in our GS20 runs was approximately 100 bp, and the FLX has been reported to generate 250 bp reads, we multiplied the read length of each randomly chosen read by 2.5 for the FLX simulations. In the Solexa simulations, we used a random start site distribution with a 25 bp read length average. We used the same gene expression distribution as the GS20 for all technologies.

To simulate traditional capillary sequences, we downloaded 48,130 ESTs from four different Arabidopsis libraries: flower buds, green siliques, roots, and above ground organs 2–6 week old. We partitioned the ESTs into two groups, 5' and 3' based on the annotations located in the fasta header. We then randomly selected 5,000 ESTs from both groups, mapped the transcripts to the Arabidopsis cDNA dataset using BLASTn, and generated start site distribution based on cDNA length. We used a 750 bp read length, except when the randomly chosen gene or the length of the gene minus the randomly chosen start site was less than 750 bp. In these cases, we used the gene length or the distance from the start site to the end of the gene as the read length.

In order to compare all technologies, we used conservative estimates (as of late 2008, not including variable costs of library or sample preparation) of the amount (MB) and price ($) of sequencing with each technology. For GS20, an average plate costs $6000/plate and the plate generates 25 MB of data ($240/MB). Since NG machines can be partitioned into smaller segments, we simulated 1/16, 1/8, 1/4, 1/2, 1, 2, 4, and 10 plates for all three technologies. For the GS20, this came to 1.56, 3.12, 6.25, 12.5, 25, 50, 100, 250, and 500 MB increments. For FLX, the cost was calculated using $9000/plate and 100 MB of data ($90/MB), with 6.25, 12.5, 25, 50, 100, 400, 1000, and 2000 MB increments. For Solexa, we used $4000/plate and 1 GB of data ($4/MB) with 50, 100, 200, 500, 1000, 2000, 4000, 10000, and 20000 MB increments. Finally, we converted the cost of traditional capillary sequencing, which is normally calculated per EST (read), by using the conventional $1/EST with 750 bp length ($1330/MB). This included 1.56, 3.12, 6.25, 12.5, 25, 50, 100, and 200 MB increments.

To examine the effects of normalization in next generation transcriptome sequencing, we simulated normalized sequencing for each of the above technologies. We assumed perfect normalization, and changed the gene expression distribution to be equal for all genes. Therefore, of the 18,261 genes estimated to be in the library, each gene has the exact same probability of being chosen as every other gene in the dataset. Although normalization can be technically difficult and requires more labor to generate, we excluded these costs and assumed that there were no additional library costs with normalization sequencing.

To compare the expected simulation results for each technology and combinations of technologies, we calculated the following parameters: percent transcriptome, the number of genes tagged, the total number of unigenes (contigs plus singletons), the mean length of the longest unigene per gene, and the number of genes covered by reads of at least 90% of the length of the gene and in only one unigene. Please see Additional file 2 for detailed simulation results used in this study.

Authors' contributions

PKW carried out the data analysis and simulation study. ASC, AB, HL, LL, LT, YH generated the data for all GS20 experiments, including the tissue extraction, library construction and optimization at Penn State (SCS, JEC, and CWD labs) and at University of Florida (DES and PSS lab, and the ICBR lab under the direction of William Farmerie). PKW, JLM, HM, JEC, SCS, DES, PSS, NA, CWD conceived of the study, and participated in its design. PKW, JLM, ASC, AB, DES, PSS, NA, CWD coordinated and helped to draft the manuscript. PKW, EW, CWD designed and developed ESTcalc. All authors read and approved the final manuscript.

Supplementary Material

Additional file 1:

Unigene blast results. This file contains the detailed blast results of all unigenes. There are 5 worksheets that contain the blast information for each of the GS20 unigene builds, Arabidopsis ('ath'), Eschscholzia ('eca – random', 'eca – oligo-dT', and 'eca – combined'), and Persea ('pam – normalized'). Each worksheet has the following columns: unigene name (query), query unigene length (qlen), number of reads (reads), coverage of best blast result (cov), the database of the best hit (db), the best hit gene name (hit), the length of the hit (hlen), the evalue, bit score, and description of the best hit (desc). See materials and methods for description of the different similarity searches used in these analyses.

Additional file 2:

Detailed simulation summary report. This file contains the detailed simulation results used to generate many of the figures in this article. Simulation results illustrating predicted outcomes for different transcriptome sequencing technologies and combinations of sequencing technologies with a complex library expressing ca. 18,000 genes. The first six fields (tech1, mb1, tech2, mb2, tech3, mb3) contain the technology or combinations of technologies for each simulation along with the amount (mb) of sequencing. For each simulated run, we calculated 16 different parameters: price – the estimated price (per MB) using the following prices for each technology EST5 ($1330), GS20 ($240), GSFLX ($90), and SOL ($4); len -percent of transcriptome sequenced with at least one read and not necessarily in one contiguous sequence; reads – the number of reads in the simulation, sin – percent of reads that are singleton sequences; uni – number of unigenes obtained; puni – number of unigenes divided by the number of estimated genes as a percentage, ulen – mean unigene length (bp)' lulen – mean unigene length (bp) using only the longest unigene per gene; genes – the estimated number of genes tagged; pgenes – the estimated number of genes tagged as a percentage; c90 – the number of genes with more than 90% coverage; c90s – the number of genes with more than 90% coverage and in one contiguous sequence (s = strict); p90s – the percentage of estimated genes with 90% coverage and in 1 contiguous sequence; c100 – the number of genes with 100% coverage; c100s – the number of genes with 100% coverage and in one contiguous sequence (s = strict); p100s – the percentage of estimated genes with 100% coverage and in one contiguous sequence.

Acknowledgements

We thank the Huck Institutes of the Life Sciences and the Eberly College of Penn State for supporting the cost of 454 sequencing of Arabidopsis and poppy, Richard Meisel for valuable discussion of Drosophila transcriptomes, and Tony Omeis and the Biology Department Greenhouses (PSU) for cultivating the poppy plants. We would also like to thank Webb Miller, Jiping Wang, and Bruce Lindsay for ideas on transcript assembly and simulation strategies. This research was supported in part by NSF Plant Genome Awards DBI-0115684 (The Floral Genome Project) and DEB 0638595 (The Ancestral Angiosperm Genome Project).

References

  • Sanger F, Nicklen S, Coulson AR. DNA sequencing with chain-terminating inhibitors. Proc Natl Acad Sci USA. 1977;74(12):5463–5467. doi: 10.1073/pnas.74.12.5463. [PMC free article] [PubMed] [Cross Ref]
  • Adams MD, Kelley JM, Gocayne JD, Dubnick M, Polymeropoulos MH, Xiao H, Merril CR, Wu A, Olde B, Moreno RF. et al. Complementary DNA sequencing: expressed sequence tags and human genome project. Science. 1991;252(5013):1651–1656. doi: 10.1126/science.2047873. [PubMed] [Cross Ref]
  • Bouck A, Vision T. The molecular ecologist's guide to expressed sequence tags. Mol Ecol. 2007;16(5):907–924. doi: 10.1111/j.1365-294X.2006.03195.x. [PubMed] [Cross Ref]
  • Velculescu VE, Zhang L, Vogelstein B, Kinzler KW. Serial analysis of gene expression. Science. 1995;270(5235):484–487. doi: 10.1126/science.270.5235.484. [PubMed] [Cross Ref]
  • Brenner S, Johnson M, Bridgham J, Golda G, Lloyd DH, Johnson D, Luo S, McCurdy S, Foy M, Ewan M. et al. Gene expression analysis by massively parallel signature sequencing (MPSS) on microbead arrays. Nat Biotechnol. 2000;18(6):630–634. doi: 10.1038/76469. [PubMed] [Cross Ref]
  • Kulesh DA, Clive DR, Zarlenga DS, Greene JJ. Identification of interferon-modulated proliferation-related cDNA sequences. Proc Natl Acad Sci USA. 1987;84(23):8453–8457. doi: 10.1073/pnas.84.23.8453. [PMC free article] [PubMed] [Cross Ref]
  • Schena M, Shalon D, Davis RW, Brown PO. Quantitative monitoring of gene expression patterns with a complementary DNA microarray. Science. 1995;270(5235):467–470. doi: 10.1126/science.270.5235.467. [PubMed] [Cross Ref]
  • Margulies M, Egholm M, Altman WE, Attiya S, Bader JS, Bemben LA, Berka J, Braverman MS, Chen YJ, Chen Z. et al. Genome sequencing in microfabricated high-density picolitre reactors. Nature. 2005;437(7057):376–380. [PMC free article] [PubMed]
  • Porreca GJ, Zhang K, Li JB, Xie B, Austin D, Vassallo SL, LeProust EM, Peck BJ, Emig CJ, Dahl F. et al. Multiplex amplification of large sets of human exons. Nat Methods. 2007;4(11):931–936. doi: 10.1038/nmeth1110. [PubMed] [Cross Ref]
  • Bentley DR. Whole-genome re-sequencing. Curr Opin Genet Dev. 2006;16(6):545–552. doi: 10.1016/j.gde.2006.10.009. [PubMed] [Cross Ref]
  • Goldberg SM, Johnson J, Busam D, Feldblyum T, Ferriera S, Friedman R, Halpern A, Khouri H, Kravitz SA, Lauro FM. et al. A Sanger/pyrosequencing hybrid approach for the generation of high-quality draft assemblies of marine microbial genomes. Proc Natl Acad Sci USA. 2006;103(30):11240–11245. doi: 10.1073/pnas.0604351103. [PMC free article] [PubMed] [Cross Ref]
  • Poinar HN, Schwarz C, Qi J, Shapiro B, Macphee RD, Buigues B, Tikhonov A, Huson DH, Tomsho LP, Auch A. et al. Metagenomics to paleogenomics: large-scale sequencing of mammoth DNA. Science. 2006;311(5759):392–394. doi: 10.1126/science.1123360. [PubMed] [Cross Ref]
  • Shendure J, Porreca GJ, Reppas NB, Lin X, McCutcheon JP, Rosenbaum AM, Wang MD, Zhang K, Mitra RD, Church GM. Accurate multiplex polony sequencing of an evolved bacterial genome. Science. 2005;309(5741):1728–1732. doi: 10.1126/science.1117389. [PubMed] [Cross Ref]
  • Cai Z, Penaflor C, Kuehl JV, Leebens-Mack J, Carlson JE, dePamphilis CW, Boore JL, Jansen RK. Complete plastid genome sequences of Drimys, Liriodendron, and Piper: implications for the phylogenetic relationships of magnoliids. BMC Evol Biol. 2006;6:77. doi: 10.1186/1471-2148-6-77. [PMC free article] [PubMed] [Cross Ref]
  • Moore MJ, Dhingra A, Soltis PS, Shaw R, Farmerie WG, Folta KM, Soltis DE. Rapid and accurate pyrosequencing of angiosperm plastid genomes. BMC Plant Biol. 2006;6:17. doi: 10.1186/1471-2229-6-17. [PMC free article] [PubMed] [Cross Ref]
  • Barakat A, Wall K, Leebens-Mack J, Wang YJ, Carlson JE, Depamphilis CW. Large-scale identification of microRNAs from a basal eudicot (Eschscholzia californica) and conservation in flowering plants. Plant J. 2007;51(6):991–1003. doi: 10.1111/j.1365-313X.2007.03197.x. [PubMed] [Cross Ref]
  • Barakat A, Wall PK, Diloreto S, Depamphilis CW, Carlson JE. Conservation and divergence of microRNAs in Populus. BMC Genomics. 2007;8:481. doi: 10.1186/1471-2164-8-481. [PMC free article] [PubMed] [Cross Ref]
  • Lu C, Kulkarni K, Souret FF, MuthuValliappan R, Tej SS, Poethig RS, Henderson IR, Jacobsen SE, Wang W, Green PJ. et al. MicroRNAs and other small RNAs enriched in the Arabidopsis RNA-dependent RNA polymerase-2 mutant. Genome Res. 2006;16(10):1276–1288. doi: 10.1101/gr.5530106. [PMC free article] [PubMed] [Cross Ref]
  • Lu C, Meyers BC, Green PJ. Construction of small RNA cDNA libraries for deep sequencing. Methods. 2007;43(2):110–117. doi: 10.1016/j.ymeth.2007.05.002. [PubMed] [Cross Ref]
  • Bainbridge MN, Warren RL, Hirst M, Romanuik T, Zeng T, Go A, Delaney A, Griffith M, Hickenbotham M, Magrini V. et al. Analysis of the prostate cancer cell line LNCaP transcriptome using a sequencing-by-synthesis approach. BMC Genomics. 2006;7:246. doi: 10.1186/1471-2164-7-246. [PMC free article] [PubMed] [Cross Ref]
  • Cheung F, Haas BJ, Goldberg SM, May GD, Xiao Y, Town CD. Sequencing Medicago truncatula expressed sequenced tags using 454 Life Sciences technology. BMC Genomics. 2006;7:272. doi: 10.1186/1471-2164-7-272. [PMC free article] [PubMed] [Cross Ref]
  • Weber AP, Weber KL, Carr K, Wilkerson C, Ohlrogge JB. Sampling the Arabidopsis transcriptome with massively parallel pyrosequencing. Plant Physiol. 2007;144(1):32–42. doi: 10.1104/pp.107.096677. [PMC free article] [PubMed] [Cross Ref]
  • Vera JC, Wheat CW, Fescemyer HW, Frilander MJ, Crawford DL, Hanski I, Marden JH. Rapid transcriptome characterization for anon-model organism using 454 pyrosequencing. Mol. Ecology. 2007;17(7):1636–47. doi: 10.1111/j.1365-294X.2008.03666.x. [PubMed] [Cross Ref]
  • Wang JP, Lindsay BG, Cui L, Wall PK, Marion J, Zhang J, dePamphilis CW. Gene capture prediction and overlap estimation in EST sequencing from one or multiple libraries. BMC Bioinformatics. 2005;6:300. doi: 10.1186/1471-2105-6-300. [PMC free article] [PubMed] [Cross Ref]
  • Wang JP, Lindsay BG, Leebens-Mack J, Cui L, Wall K, Miller WC, dePamphilis CW. EST clustering error evaluation and correction. Bioinformatics. 2004;20(17):2973–2984. doi: 10.1093/bioinformatics/bth342. [PubMed] [Cross Ref]
  • Arabidopsis Genome Initiative. Analysis of the genome sequence of the flowering plant Arabidopsis thaliana. Nature. 2000;408(6814):796–815. doi: 10.1038/35048692. [PubMed] [Cross Ref]
  • Carlson JE, Leebens-Mack JH, Wall PK, Zahn LM, Mueller LA, Landherr LL, Hu Y, Ilut DC, Arrington JM, Choirean S. et al. EST database for early flower development in California poppy (Eschscholzia californica Cham., Papaveraceae) tags over 6,000 genes from a basal eudicot. Plant Mol Biol. 2006;62(3):351–369. doi: 10.1007/s11103-006-9025-y. [PubMed] [Cross Ref]
  • Wege S, Scholz A, Gleissberg S, Becker A. Highly efficient virus-induced gene silencing (VIGS) in California poppy (Eschscholzia californica): an evaluation of VIGS as a strategy to obtain functional data from non-model plants. Annals of Bot. 2007;100(3):641–649. doi: 10.1093/aob/mcm118. [PMC free article] [PubMed] [Cross Ref]
  • Chanderbali AS, Albert V, Ashworth V, Clegg MT, E LR, Soltis DE, Soltis PS. Persea americana (avocado): bringing ancient flowers to fruit in the genomics era. Bioessays. 2008;30(4):386–96. doi: 10.1002/bies.20721. [PubMed] [Cross Ref]
  • Zhang X, Feng B, Zhang Q, Zhang D, Altman N, Ma H. Genome-wide expression profiling and identification of gene activities during early flower development in Arabidopsis. Plant Mol Biol. 2005;58(3):401–419. doi: 10.1007/s11103-005-5434-6. [PubMed] [Cross Ref]
  • Haslett JN, Sanoudou D, Kho AT, Bennett RR, Greenberg SA, Kohane IS, Beggs AH, Kunkel LM. Gene expression comparison of biopsies from Duchenne muscular dystrophy (DMD) and normal skeletal muscle. Proc Natl Acad Sci USA. 2002;99(23):15000–15005. doi: 10.1073/pnas.192571199. [PMC free article] [PubMed] [Cross Ref]
  • O'Rourke D, Baban D, Demidova M, Mott R, Hodgkin J. Genomic clusters, putative pathogen recognition molecules, and antimicrobial genes are induced by infection of C. elegans with M. nematophilum. Genome Res. 2006;16(8):1005–1016. doi: 10.1101/gr.50823006. [PMC free article] [PubMed] [Cross Ref]
  • Wang J, Kean L, Yang J, Allan AK, Davies SA, Herzyk P, Dow JA. Function-informed transcriptome analysis of Drosophila renal tubule. Genome Biol. 2004;5(9):R69. doi: 10.1186/gb-2004-5-9-r69. [PMC free article] [PubMed] [Cross Ref]
  • Usaite R, Patil KR, Grotkjaer T, Nielsen J, Regenberg B. Global transcriptional and physiological responses of Saccharomyces cerevisiae to ammonium, L-alanine, or L-glutamine limitation. Appl Environ Microbiol. 2006;72(9):6194–6203. doi: 10.1128/AEM.00548-06. [PMC free article] [PubMed] [Cross Ref]
  • Dohm JC, Lottaz C, Borodina T, Himmelbauer H. SHARCGS, a fast and highly accurate short-read assembly algorithm for de novo genomic sequencing. Genome Res. 2007;17(11):1697–1706. doi: 10.1101/gr.6435207. [PMC free article] [PubMed] [Cross Ref]
  • Jeck WR, Reinhardt JA, Baltrus DA, Hickenbotham MT, Magrini V, Mardis ER, Dangl JL, Jones CD. Extending assembly of short DNA sequences to handle error. Bioinformatics. 2007;23(21):2942–2944. doi: 10.1093/bioinformatics/btm451. [PubMed] [Cross Ref]
  • Warren RL, Sutton GG, Jones SJ, Holt RA. Assembling millions of short DNA sequences using SSAKE. Bioinformatics. 2007;23(4):500–501. doi: 10.1093/bioinformatics/btl629. [PubMed] [Cross Ref]
  • Eveland AL, McCarty DR, Koch KE. Transcript Profiling by 3'UTR Sequencing Resolves Expression of Gene Families. Plant Physiol. 2008;146(1):32–44. doi: 10.1104/pp.107.108597. [PMC free article] [PubMed] [Cross Ref]
  • Torres TT, Metta M, Ottenwalder B, Schlotterer C. Gene expression profiling by massively parallel sequencing. Genome Res. 2008;18(1):172–7. doi: 10.1101/gr.6984908. [PMC free article] [PubMed] [Cross Ref]
  • Hennig L, Menges M, Murray JA, Gruissem W. Arabidopsis transcript profiling on Affymetrix GeneChip arrays. Plant Mol Biol. 2003;53(4):457–465. doi: 10.1023/B:PLAN.0000019069.23317.97. [PubMed] [Cross Ref]
  • Redman JC, Haas BJ, Tanimoto G, Town CD. Development and evaluation of an Arabidopsis whole genome Affymetrix probe array. Plant J. 2004;38(3):545–561. doi: 10.1111/j.1365-313X.2004.02061.x. [PubMed] [Cross Ref]
  • Baker CC, Sieber P, Wellmer F, Meyerowitz EM. The early extra petals1 mutant uncovers a role for microRNA miR164c in regulating petal number in Arabidopsis. Curr Biol. 2005;15(4):303–315. doi: 10.1016/j.cub.2005.02.017. [PubMed] [Cross Ref]
  • Buzgo M, Chanderbali AS, Kim S, Zheng Z, Oppenheimer DG, Soltis PS, Soltis DE. Floral developmental morphology of Persea americana (Avocado, Lauraceae): The oddities of male organ identity. Int J Plant Sci. 2007;168(3):261–284. doi: 10.1086/510297. [Cross Ref]
  • Doyle JJ, Doyle J. A rapid DNA isolation from small amount of fresh leaf tissue. Phytochemical Bull. 1987;19:11–15.
  • Kim S, Yoo M-J, Albert VA, Farris JS, Soltis PS, Soltis DE. Phylogeny and diversification of B-function MADS-box genes in angiosperms: Evolutionary and functional implications of a 260-million-year-old duplication. Amer J Bot. 2004;91(12):2102–2118. doi: 10.3732/ajb.91.12.2102. [PubMed] [Cross Ref]
  • Zhu YY, Machleder EM, Chenchik A, Li R, Siebert PD. Reverse transcriptase template switching: a SMART approach for full-length cDNA library construction. Biotechniques. 2001;30(4):892–897. [PubMed]
  • Zhulidov PA, Bogdanova EA, Shcheglov AS, Vagner LL, Khaspekov GL, Kozhemyako VB, Matz MV, Meleshkevitch E, Moroz LL, Lukyanov SA. et al. Simple cDNA normalization using kamchatka crab duplex-specific nuclease. Nucleic Acids Res. 2004;32(3):e37. doi: 10.1093/nar/gnh031. [PMC free article] [PubMed] [Cross Ref]
  • Lukyanov KA, Launer GA, Tarabykin VS, Zaraisky AG, Lukyanov SA. Inverted terminal repeats permit the average length of amplified DNA fragments to be regulated during preparation of cDNA libraries by polymerase chain reaction. Anal Biochem. 1995;229(2):198–202. doi: 10.1006/abio.1995.1402. [PubMed] [Cross Ref]
  • Altschul SF, Gish W, Miller W, Myers EW, Lipman DJ. Basic local alignment search tool. J Mol Biol. 1990;215(3):403–410. [PubMed]

Articles from BMC Genomics are provided here courtesy of BioMed Central
PubReader format: click here to try

Formats:

Related citations in PubMed

See reviews...See all...

Cited by other articles in PMC

See all...

Links

Recent Activity

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

See more...