• We are sorry, but NCBI web applications do not support your browser and may not function properly. More information
Logo of nanoreslettspringer open web sitethis articlemanuscript submissionregistrationjournal front pagespringer open web site
Nanoscale Res Lett. 2010; 5(8): 1289–1294.
Published online May 22, 2010. doi:  10.1007/s11671-010-9640-z
PMCID: PMC2897046

Synthesis, Magnetic Anisotropy and Optical Properties of Preferred Oriented Zinc Ferrite Nanowire Arrays

Abstract

Preferred oriented ZnFe2O4 nanowire arrays with an average diameter of 16 nm were fabricated by post-annealing of ZnFe2 nanowires within anodic aluminum oxide templates in atmosphere. Selected area electron diffraction and X-ray diffraction exhibit that the nanowires are in cubic spinel-type structure with a [110] preferred crystallite orientation. Magnetic measurement indicates that the as-prepared ZnFe2O4 nanowire arrays reveal uniaxial magnetic anisotropy, and the easy magnetization direction is parallel to the axis of nanowire. The optical properties show the ZnFe2O4 nanowire arrays give out 370–520 nm blue-violet light, and their UV absorption edge is around 700 nm. The estimated values of direct and indirect band gaps for the nanowires are 2.23 and 1.73 eV, respectively.

Keywords: ZnFe2O4, Nanowire arrays, Preferred oriented, Magnetic anisotropy, Optical properties

Introduction

As an important member of ferrite family, nanometer-sized spinel ZnFe2O4 has received growing interest from the fundamental and experimental point of view because of its potential application in gas sensors with high sensitivity and low-energy consumption [1-4]. Besides, the nanometer-sized ZnFe2O4 is considered as a promising semiconductor photocatalyst for various photochemical processes, such as photoelectric conversion and photochemical hydrogen production from water, owing to its ability to absorb visible light, high efficiency, low cost, and excellently photochemical stability [5-7]. Meanwhile, the nanometer-sized ZnFe2O4 shows unusual magnetic properties compared to the bulk form [8], such as high Curie temperature and large magnetization at room temperature (RT) have been observed in ZnFe2O4 nanoparticles and films [9-12]. The issue has been extensively researched and ascribed to the dominant role of oxygen vacancies [13], surface effects [14], as well as cation random distribution of magnetic Fe3+ ions and diamagnetic Zn2+ ions among the interstitial octahedral (B) and tetrahedral (A) sites [15].

One-dimensional nanostructures can provide versatile building blocks for fabricating functional nanoscale electronic, optoelectronic, biomedical devices, magnetic and optical properties based on the bottom-up paradigm [16-20]. Recently, arrays of Ru, Pt, and PtRu nanowires and nanotubes were prepared by electrodeposition through the porous structure of an anodic aluminum oxide (AAO) membrane [21]. Iron-based 1D nanostructures have been successfully prepared using an electrospinning technique and varying the pyrolysis atmospheres [22]. Besides,1D magnetic MFe2O4 (M = Co, Ni and Mn) nanomaterials also have been fabricated owing to their unique application in mesoscopic physics and nanoscale devices excellent properties [23-25]. For zinc ferrite, Liu et al. fabricated ZnFe2O4 nanowires exhibiting unusual magnetic behavior by the thermal decomposition of the precursors inside silica host SBA-15 template [26]. By using a facile sol–gel AAO template method, Zhang and Liu et al. got highly ordered ZnFe2O4 nanotube arrays, which displayed low-energy consumption and high sensitivity to organics as gas sensor materials and exhibited unusual photovoltaic behavior [7,27]. However, all these 1D ZnFe2O4 nanostructures have no orientation, where Kim et al. demonstrated that ordered ZnO microrod arrays with the preferred orientation of [0001] direction showing a strong free-exciton emission at 3.23 eV and a weak deep level emission at 2.2 eV reveals the high optical quality than that of the ZnO nanowire arrays with no orientation [28,29].

Recently, Zhang and Zhu et al. demonstrated that the properties of 1D nanostructures depend strongly not only on the ordered arrangement but also on the crystal orientation as well [30,31]. In our previous, the ordered CoFe2O4 nanowire arrays with preferred crystal orientation were prepared by using the template synthesis in conjunction with electrochemical deposition [32]. Here, ordered ZnFe2O4 nanowire arrays with preferred crystal orientation of [110] direction were prepared by spatial confinement oxidation of preferred [110] crystal orientation ZnFe2 alloy nanowires in AAO templates. The magnetic and optical properties of ZnFe2O4 nanowire arrays were studied.

Experiment

AAO was used as the template to synthesize ZnFe2O4 nanowire arrays. The AAO templates were prepared through two anodizing steps as our report previously [33]. Briefly, high purity (99.999%) aluminum foil was polished in the mixed solution of ethanol and choric acid (HClO4) in the constant current of 1.5 A for 5 min. The two-step anodization process was carried out in constant voltage mode to improve the arrangement of the ordered nanopore arrays. In the first step of the anodization, aluminum foil was anodized in 0.3 M H2SO4 aqueous solution under the constant voltage of 13 V at 0°C for 0.5 h resulting in the textured surface, and then the formed anodic alumina layer was removed in the mixed solution of 0.4 M phosphoric acid and 0.2 M chromic acid at 60°C. Subsequently, the foil was re-anodized for 4 h using the same parameters in the first step. The electrolyte contained FeSO4·7H2O (22 g/l), ZnSO4·7H2O (10 g/l), H3BO3 (10 g/l) with the pH value of 3.2. The alternating current electrodeposition was conducted at 200 Hz and 13 V for the duration of 5 min. The compositions in the ZnFe alloy nanowires were analyzed by energy dispersive X-ray spectroscopy (EDS) and inductively coupled plasma-atomic emission spectrometer (IRIS, ER/S). The results indicate the atom ratio of Fe:Zn is about 2. Because of the confinement of the nanopore size, after heat treating the well orientation ZnFe2 alloy nanowire arrays in tube furnace at 460°C for 21 h in atmosphere, the arrays of ZnFe2O4 nanowires inside the AAO templates with preferred crystallite orientation were obtained.

The morphologies of the nanowires were obtained by using the scanning electron microscope (SEM, Hitachi S-4800) and transmission electron microscopy (TEM, JEM-2010), where the nanowires were separated from the AAO templates by dissolving the aluminium oxide templates in the mixed solution of 0.2 M H2CrO4 and 0.4 M H3PO4. The selected area electron diffraction (SAED) and X-ray diffraction (XRD, X’ Pert PRO PHILIPS with Cu Kα radiation) were employed to study the structure of the nanowires. The measurements of magnetic properties were made using Quantum Design MPMS magnetometer based on superconducting quantum interference device (SQUID) and vibrating sample magnetometer (VSM, Lakeshore 7304). Micro photoluminescence (PL) measurement was carried out at room temperature (RT) using a He-Cd laser with the wavelength of 325 nm and output power of 15 W as the excitation source. Light absorption property was measured using a UV–vis spectrophotometer (JASCO, UV-550).

Results and Discussion

Figure Figure1a1a shows the cross-sectional SEM image of ZnFe2O4 nanowires within AAO template. It is found that the nanowire arrays are ordered in AAO templates, and the average diameter is about 16 nm with the aspect ratio of 125. The EDS spectrum of the sample is shown in the inset of Fig. Fig.1a,1a, which reveals that the atom ratio of Zn: Fe is 32.3:67.7 (about 1:2), the same as the result of ICP. Shown in Fig. Fig.1b1b is the TEM image of ZnFe2O4 nanowires, which has a diameter consistent with the result of SEM. Figure Figure1c1c shows the high resolution TEM image of the corresponding ZnFe2O4 nanowires. The lattice fringe between the two adjacent planes is about 0.30 nm apart, which is equal to the lattice fringes of the standard ZnFe2O4, growing along the [220] direction. The SAED pattern taken from the nanowires is shown in Fig. Fig.1d,1d, consisting of five obvious rings, which are corresponding to (220), (311), (400), (511), and (440) planes of polycrystalline ZnFe2O4 with a cubic spinel-type lattice structure [34].

Figure 1
a planar view SEM image of ZnFe2O4 nanowires within AAO templates and corresponding EDS result is shown in the inset b TEM image c HRTEM image and d SAED pattern of ZnFe2O4 nanowires

XRD patterns of the ZnFe2 and ZnFe2O4 nanowire arrays within AAO templates are shown in Fig. Fig.2a,2a, ,2b,2b, respectively. Besides the smooth amorphous broad peak which comes from the AAO template, there is a sharp peak in XRD pattern of ZnFe2 nanowire arrays implying that orientation of [110] is perfect preferred. Similarly, the diffraction peaks of ZnFe2O4 nanowire arrays shown in Fig. Fig.2b2b can be indexed as (220), (311), and (440) of spinel-type lattice structure, and the [220] texture is along the axis of the ZnFe2O4 nanowire arrays. XRD pattern of the ZnFe2O4 powders is shown in the inset of Fig. Fig.1b1b for comparison.

Figure 2
a XRD patterns of ZnFe2 and b ZnFe2O4 nanowire arrays within AAO templates. The inset in Fig. Fig.2b2b is the XRD patten of ZnFe2O4 powders for comparison. c Schematic illustration of the crystal growth process for ZnFe2O4 nanowire arrays

The schematic of the possible formation process of preferred oriented ZnFe2O4 nanowire arrays is shown in Fig. Fig.2c.2c. The process could be described as: ZnFe2 + 2O2 → ZnFe2O4. The XRD result shows that the ZnFe2 alloy nanowires have the preferred [110] crystal orientation along the axis of nanowires, which combined with the minor holes of AAO templates playing an important role to make the growth of ZnFe2O4 nanowire arrays largely guide along the nanowire axis direction when heat treated. To sum up, there are two main conditions that make the nanowire arrays prefer crystal orientation: the one is the well orientation of original metal crystal, and the other is the spatial confinement of the minor hole.

The magnetic hysteresis loops recorded at 300 and 80 K using SQUID for ZnFe2O4 nanowire arrays within AAO templates are shown in Fig. Fig.3,3, where // and [perpendicular] represent that the applied field H is parallel and perpendicular to the major nanowire axis, respectively. The slope of the linier contribution in the saturation region has been subtracted. It can be seen that the magnetic hysteresis loops in parallel and perpendicular directions at both 300 and 80 K are separating, indicating the existence of magnetic anisotropy for preferred oriented ZnFe2O4 nanowire arrays, and magnetic easy axis is directed along the wire axis. Nearly, zero coercive forces are observed at 300 K both in the parallel and in the perpendicular direction (Hc// = 5 Oe and Hc[perpendicular] = 3 Oe). The magnetic hysteresis loops measured at 80 K indicate the coercivity (Hc) and squareness ratio (M/Ms) are about 290 Oe (Hc//), 125 Oe (Hc[perpendicular]), 0.21 (M/Ms//), and 0.08 (M/Ms[perpendicular]), respectively, where the magnified view of the magnetic hysteresis loops is shown in right bottom insets in Fig. Fig.3a3a and and3b,3b, respectively. The magnetic hysteresis loops of ZnFe2 nanowire arrays within AAO templates recorded at RT by VSM are shown in left top inset of Fig. Fig.3a3a for compared.

Figure 3
Magnetic hysteresis loops of the ZnFe2O4 nanowires within AAO measured with the applied field parallel and perpendicular to the axis of the nanowires at (a) 300 K and (b) 80 K by SQUID. The magnified view of the magnetic hysteresis loops is shown in ...

As we known, bulk Zn-ferrite belongs to the normal spinel structure with paramagnetic properties at RT and long range antiferromagnetic order below 10 K [35]. However, nanocrystalline zinc ferrite is of great interest due to its unique magnetic properties that differ substantially from its bulk counterpart [10]. The occupancy of Fe3+ ions on both A- and B-sites leads to strong negative superexchange interaction between Fe3+ ions with large magnetization values. In our experiment, when ZnFe2 alloy nanowires were post-oxidation annealed, defects and the disorder of cation redistribution on A- and B- sites may occur, which can induce the magnetization for ZnFe2O4 nanowire arrays in our case.

For the spinel ferrite, the easy axis of magnetization is [100], and the hard one is [111]. The axis [110] is between them having the angle (θ) of 45° with the [100] and [111] directions, respectively. The total anisotropy is determined by the magnetostatic energy and the magnetocrystalline anisotropy energy. As the nanowires are oriented in polycrystals with high aspect ratio of 125, the easy magnetization direction determined by magnetostatic energy is along the axis of the nanowires. It can be seen from Fig. Fig.4,4, the anger of α is not fixed but changed from 0° to 360° in xy plane. So we presumed that the distribution of [100] may be like a conical axis shown in Fig. Fig.4.4. When the applied field H is parallel to the nanowire axis ([110] direction), the magnetic moment components in xy plane cancel out each other, while the magnetic moment components in [110] direction are summed up. Owing to the high aspect ratio of the nanowires, it is concluded from earlier analyses that the easy magnetization axis of the nanowires is along the axis direction.

Figure 4
Schematic illustration of easy magnetization axis and distribution of [100] direction for preferred oriented ZnFe2O4 nanowire arrays

We further perform the PL spectroscopy to explore the optical properties of the ZnFe2O4 nanowires. Figure Figure55 illustrates the RT PL spectra of ZnFe2O4 nanowire arrays within AAO templates. The broadband visible emission band is observed in the entire PL spectrum, which can be fitted by two main emission bands: one is in the blue light region, and the other is in the violet light one. The blue emission around 468 nm can be assigned to intrinsic defects, particularly interstitial zinc defects [36]. And the same violet emission around 412 nm was also observed in excessive 50% Fe doped ZnO nanostructure where this luminescence was considered to be significantly contributed by the ZnFe2O4 phase [37], which is corresponding to our result. At the same time, the image captured by camera indicates that the sample gives out blue-violet light, which is corresponding to the PL spectrum result. ZnFe2O4 has been known to have the strong absorption in the UV–vis range [38-40]. As shown in Fig. Fig.6,6, the ZnFe2O4 nanowire arrays have the strong band edge absorption in the wavelength region of ≤700 nm. The optical band gap Eg can be estimated from absorption coefficient (α) using the Tauc relation

equation image
Figure 5
PL spectra of ZnFe2O4 nanowire arrays within AAO templates measured at RT, and the image captured by camera indicates that the sample gives out blue-violet light is shown in the inset
Figure 6
a The UV–vis absorption spectra b plots of An external file that holds a picture, illustration, etc.
Object name is 1556-276X-5-1289-i5.gif and (c) An external file that holds a picture, illustration, etc.
Object name is 1556-276X-5-1289-i6.gif vs An external file that holds a picture, illustration, etc.
Object name is 1556-276X-5-1289-i7.gif for ZnFe2O4 nanowire arrays

where A is a constant that depends on the transition probability, An external file that holds a picture, illustration, etc.
Object name is 1556-276X-5-1289-i2.gif is the energy of incident photon, and q is an index that characterizes the optical absorption process [41]. It is well known that direct and indirect band gap energy for the semiconductor nanostructures can be obtained from the intersection of linear fits of An external file that holds a picture, illustration, etc.
Object name is 1556-276X-5-1289-i3.gif versus An external file that holds a picture, illustration, etc.
Object name is 1556-276X-5-1289-i4.gif plots for q = 1/2 and 2 on the x-axis. Here, the estimated values of the direct and indirect band gaps are about 2.23 and 1.73 eV for preferred oriented ZnFe2O4 nanowire arrays, respectively (shown in Fig. Fig.6b6b and and6c).6c). Improved optical properties of the ZnFe2O4 nanomaterials are expected, and these aspects need further investigation.

Conclusion

In summary, arrays of ZnFe2O4 nanowires with diameters of about 16 nm were successfully fabricated by electrodeposition of Zn2+ and Fe2+ into AAO templates and post-oxidation annealing in atmosphere. The results of XRD and HRTEM exhibit that the nanowires have the bcc structure with [110] as the texture direction along the nanowire axis. The preferred orientation and shape anisotropy of the nanowire arrays makes the ZnFe2O4 nanowire arrays to exhibit the uniaxial magnetic anisotropy with the easy magnetization direction along the nanowire axes. The optical properties show ZnFe2O4 nanowire arrays give out blue-violet light, and the optical band gap Eg is estimated from absorption coefficient. Further investigation into magnetic and optical properties of the ZnFe2O4 nanomaterials is in progress.

Acknowledgments

This work is supported by National Science Fund for Distinguished Young Scholars (Grant No. 50925103), The Keygrant Project of Chinese Ministry of Education (Grant No. 309027) and The Fundamental Research Funds for the Central Universities (Grant No. Lzujbky-2009-162).

Open Access

This article is distributed under the terms of the Creative Commons Attribution Noncommercial License which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.

References

  • Gopal RCV, Manorama SV, Rao VJ. J. 2000. p. 775. [Cross Ref]
  • Jiao Z, Wu MH, Gu JZ, Qin Z. IEEE Sens. 2003. p. 435. COI number [1:CAS:528:DC%2BD3sXnslKntLs%3D] [Cross Ref]
  • Niu XS, Du WP, Du WM. Sens. Actuators B. 2004. p. 405. [Cross Ref]
  • Chu XF, Liu XQ, Meng GY. Sens. Actuators B. 2000. p. 64. [Cross Ref]
  • Liu GG, Zhang XZ, Xu YJ, Niu XS, Zheng LQ, Ding XJ. Chemosphere. 2004. p. 1287. COI number [1:CAS:528:DC%2BD2cXjtFans7s%3D] [PubMed] [Cross Ref]
  • Sultan M, Singh R. J. 2009. p. 07A512. [Cross Ref]
  • Liu FF, Li XY, Zhao QD, Hou Y, Quan X, Chen GH. Acta Mater. 2009. p. 2684. COI number [1:CAS:528:DC%2BD1MXltVWkt7s%3D] [Cross Ref]
  • Sepelak V, Zatroch M, Tkacova K, Petrovic P, Wibmann S, Becker KD. Mater. 1997. p. 226.
  • Ehrhardt H, Campbel SJ, Hofmann M. Scripta Mater. 2003. p. 1141. COI number [1:CAS:528:DC%2BD3sXhtlGrt7w%3D] [Cross Ref]
  • Philip J, Gnanaprakash G, Panneerselvam G, Antony MP, Jayakumar T, Raj B. J. 2007. p. 054305. Bibcode number [2007JAP...102e4305P] [Cross Ref]
  • Bohra M, Prasad S, Kumar N, Misra DS, Sahoo SC, Venkataramani N, Krishnan R. Appl. 2006. p. 262506. Bibcode number [2006ApPhL..88z2506B] [Cross Ref]
  • Xu XJ, Zhou LH, Zhai QG, Lu CZ. J. 2007. p. 1959. COI number [1:CAS:528:DC%2BD2sXmvF2rt7c%3D] [Cross Ref]
  • Oliver SA, Harris VG, Hamdeh HH, Ho JC. Appl. 2000. p. 2761. COI number [1:CAS:528:DC%2BD3cXivFCmtrs%3D]; Bibcode number [2000ApPhL..76.2761O] [Cross Ref]
  • Jeyadevan B, Tohji K, Nakatsuka K. J. 1994. p. 6325. COI number [1:CAS:528:DyaK2MXit1Cis78%3D]; Bibcode number [1994JAP....76.6325J] [Cross Ref]
  • Upadhyay C, Verma HC, Sathe V, Pimpale AV. J. 2007. p. 271. COI number [1:CAS:528:DC%2BD2sXjtVeht7c%3D]; Bibcode number [2007JMMM..312..271U] [Cross Ref]
  • Huang Y, Duan XF, Wei QQ, Lieber CM. Science. 2001. p. 630. Bibcode number [2001Sci...291..630H] [PubMed] [Cross Ref]
  • Gudiksen MS, Lauhon LJ, Wang JF, Smith DC, Lieber CM. Nature. 2002. p. 617. COI number [1:CAS:528:DC%2BD38XhsVCjsL4%3D]; Bibcode number [2002Natur.415..617G] [PubMed] [Cross Ref]
  • Mieszawska AJ, Jalilian R, Sumanasekera GU, Zamborini FP. Small. 2007. p. 722. COI number [1:CAS:528:DC%2BD2sXls1Wqtb8%3D] [PubMed] [Cross Ref]
  • Han XF, Shamaila S, Sharif R, Chen JY, Liu HR, Liu DP. Adv. 2009. p. 1.
  • Greene LE, Law M, Goldberger J, Kim F, Johnson JC, Zhang YF, Saykally RJ, Yang PD. Angew. 2003. p. 3031. COI number [1:CAS:528:DC%2BD3sXlslGksbw%3D] [PubMed] [Cross Ref]
  • Ponrouch A, Garbarino S, Pronovost S, Taberna PL, Simon P, Guay D. J. 2010. p. K59. COI number [1:CAS:528:DC%2BC3cXhs1Kku7c%3D] [Cross Ref]
  • Eid C, Brioude A, Salles V, Plenet JC, Asmar R, Monteil Y, Khoury R, Khoury A, Miele P. Nanotechnology. 2010. p. 125701. Bibcode number [2010Nanot..21l5701E] [PubMed] [Cross Ref]
  • Wang ZL, Liu XJ, Lv MF, Chai P, Liu Y, Zhou XF, Meng J. J. Phys. Chem. C. 2008. p. 15171. COI number [1:CAS:528:DC%2BD1cXhtVeit7vE] [Cross Ref]
  • Chu XF, Jiang DL, Zheng CM. Sens. 2007. p. 793. [Cross Ref]
  • Hou XY, Feng J, Xu XD, Zhang ML. J. 2010. p. 258. COI number [1:CAS:528:DC%2BC3cXhtFarsb8%3D] [Cross Ref]
  • Liu SX, Yue K, Jiao K, Zhou Y, He HY. Mater Lett. 2006. p. 154. COI number [1:CAS:528:DC%2BD2MXhtFOmsL3N] [Cross Ref]
  • Zhang GY, Li CS, Cheng FY. Sens. Actuators B. 2007. p. 403. [Cross Ref]
  • Kim YJ, Lee CH, Hong YJ, Yi G, Kim SS, Cheong H. Appl. 2006. p. 163128. Bibcode number [2006ApPhL..89p3128K] [Cross Ref]
  • Yao BD, Chan YF, Wang N. Appl. 2002. p. 22. Bibcode number [2002ApPhL..81...22L] [Cross Ref]
  • Zhang J, Jones GA, Shen TH, Donnelly SE, Li GH. J. 2007. p. 054310. Bibcode number [2007JAP...101e4310Z] [Cross Ref]
  • Zhu YG, Dou XC, Huang XH, Li L, Li GH. J. Phys. Chem. B. 2006. p. 26189. COI number [1:CAS:528:DC%2BD28Xht1ClurvL] [PubMed] [Cross Ref]
  • Xu Y, Xue DS, Gao DQ, Fu JL, Fan XL, Guo DW, Gao B, Sui WB. Electrochim. Acta. 2009. p. 5684. COI number [1:CAS:528:DC%2BD1MXnslKgsbc%3D] [Cross Ref]
  • Gao DQ, Xue DS, Xu Y, Yan ZJ, Zhang ZH. Electrochim. Acta. 2009. p. 2392. COI number [1:CAS:528:DC%2BD1MXhvFajtLc%3D] [Cross Ref]
  • Yao CW, Zeng QS, Goya GF, Torres T, Liu JF, Wu HP, Ge MY, Zeng YW, Wang YW, Jiang JZ. J. Phys. Chem. C. 2007. p. 12274. COI number [1:CAS:528:DC%2BD2sXotlOjtLY%3D] [Cross Ref]
  • Hamed HH, Ho JC, Oliver SA, Willey RJ, Olivieri G, Busca G. J. 1997. p. 1851. Bibcode number [1997JAP....81.1851H] [Cross Ref]
  • Srivastava AK, Deepa M, Bahadur N, Goyat MS. Mater. 2009. p. 194. COI number [1:CAS:528:DC%2BD1MXktlymtA%3D%3D] [Cross Ref]
  • Chen AJ, Wu XM, Sha ZD, Zhuge LJ, Meng YD. J. 2006. p. 4762. COI number [1:CAS:528:DC%2BD28XhtlSjtLbO]; Bibcode number [2006JPhD...39.4762C] [Cross Ref]
  • Yuan ZH, You W, Jia JH, Zhang LD. Chin. 1998. p. 535. COI number [1:CAS:528:DyaK1cXlvFCgtrg%3D]; Bibcode number [1998ChPhL..15..535Y] [Cross Ref]
  • Wu Z, Okuya M, Kaneko S. Thin Solid Films. 2001. p. 109. COI number [1:CAS:528:DC%2BD3MXhvVWqtrc%3D]; Bibcode number [2001TSF...385..109W] [Cross Ref]
  • Marquez E, Malo JR, Villares P, Garay RJ, Ewen PJS, Owen AE. J. 1992. p. 535. COI number [1:CAS:528:DyaK38XhvVelsLk%3D]; Bibcode number [1992JPhD...25..535M] [Cross Ref]
  • Qasrawi AF. Cryst. 2005. p. 610. COI number [1:CAS:528:DC%2BD2MXlsV2jtb4%3D] [Cross Ref]

Articles from Nanoscale Research Letters are provided here courtesy of Springer
PubReader format: click here to try

Formats:

Related citations in PubMed

See reviews...See all...

Links

  • MedGen
    MedGen
    Related information in MedGen
  • PubMed
    PubMed
    PubMed citations for these articles

Recent Activity

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

See more...