• We are sorry, but NCBI web applications do not support your browser and may not function properly. More information
Logo of nanoreslettspringer open web sitethis articlemanuscript submissionregistrationjournal front pagespringer open web site
Nanoscale Res Lett. 2009; 4(8): 937–941.
Published online May 22, 2009. doi:  10.1007/s11671-009-9339-1
PMCID: PMC2893695

Synthesis and Spectral Studies of CdTe–Dendrimer Conjugates

Abstract

In order to couple high cellular uptake and target specificity of dendrimer molecule with excellent optical properties of semiconductor nanoparticles, the interaction of cysteine-capped CdTe quantum dots with dendrimer was investigated through spectroscopic techniques. NH2-terminated dendrimer molecule quenched the photoluminescence of CdTe quantum dots. The binding constants and binding capacity were calculated, and the nature of binding was found to be noncovalent. Significant decrease in luminescence intensity of CdTe quantum dots owing to noncovalent binding with dendrimer limits further utilization of these nanoassemblies. Hence, an attempt is made, for the first time, to synthesize stable, highly luminescent, covalently linked CdTe–Dendrimer conjugate in aqueous medium using glutaric dialdehyde (G) linker. Conjugate has been characterized through Fourier transform infrared spectroscopy and transmission electron microscopy. In this strategy, photoluminescence quantum efficiency of CdTe quantum dots with narrow emission bandwidths remained unaffected after formation of the conjugate.

Keywords: Quantum dots, Dendrimer, Conjugate, Infrared spectroscopy, Luminescence

Introduction

Rapid advances in nanotechnology and nanoscience have spurred interests in developing a variety of nanostructured materials. In this context, semiconductor nanoparticles (also known as quantum dots) are the most promising ones due to their high photochemical stability and size-tunable photoluminescence [1]. Quantum dots (QDs), in particular, have potential applications in optoelectronics, biosensing and biolabelling, etc. [2,3] Recently, integration of these QDs with biological macromolecules greatly expands the impact of optical imaging, sensing and also of therapeutic strategies [4,5]. The binding of different categories of molecules to QDs has been studied by optical methods to elucidate binding mechanism, because the surface of nanoparticles (NPs) affects the electronic states, which, in turn, influence the photoluminescence (PL) emission of QDs [6]. In our earlier reports, the binding of amino acids, DNA bases, biological relevant metal ions, enzyme and peroxynitrite (PN), a powerful biological oxidant with semiconductor QDs was investigated, and a quantitative correlation was established therein [7-11]. However, the binding of dendrimer with QDs is of special interest as immobilization of semiconductor nanocrystal onto dendrimer has great implication in the field of material science in view of amalgamation of excellent luminescent properties of semiconductors with varied functionalities of dendrimer molecules. PAMAM Dendrimers are synthetic spherical macromolecules with a well-defined surface, comprising a core, branching sites and a large number of terminal groups [12]. The biomimetic properties and low cytotoxicity of dendrimer molecules make them potentially useful for many biological applications such as gene transfection, diagnostics, drug delivery as well as nanoscale building blocks [13,14]. The molecules are small enough to pass into the cell membrane and can be used to deliver substances such as drugs, genetic materials or chemical markers right into the cells [15]. Thus, CdTe–Dendrimer conjugates can act as new luminescent multi-functional nanostructured materials. To achieve binding specificity and targeting ability, QDs can be linked to monoclonal antibodies, peptides, oligonucleotides, small inhibitor or hydrophilic segment (such as polyethylene glycol [PEG]). It is expected that the self-assembly of the dendrimer molecules onto NPs provide a route to modifying the NPs for targeted imaging of cancer cells [16]. In general, assembly process of NPs largely relies on noncovalent interactions. However, the drawback is the inherent instability of these conjugates under varied environmental parameters, such as low pH, higher temperature, ionic strength, etc. Thus, an alternative pragmatic approach to preparing QD assemblies is interfacing through covalent binding [8,17,18]. This method of functionalizing QDs is simple and can avoid complicated synthesis and characterization of the intermediate products of QDs, when reactions are performed on the QD surfaces. A number of reports have been published in which biological molecules have been attached onto the surface of QDs. However, optimization of conjugation process is a prerequisite for the use of QDs in biomedical applications.

In the present work, the interactions between CdTe QDs and dendrimers of different generations have been studied fluorimetrically. The binding constantsKSVandKband binding stoichiometry of the complex (n) have been determined. Significant differences on the values of binding constants for dendrimers of different generation suggest that generation has strong influence upon the interaction between CdTe QDs and dendrimer. We, further, demonstrate a simple method of the preparation of CdTe–Dendrimer conjugates through covalent binding using Glutaric dialdehyde (G) linker and describe their optical properties. Semiconductor–dendrimer conjugate, thus synthesized, represents a hybrid material in which fluorescence of semiconductors convolutes with the biomimetic properties of dendrimer, which is ideally suited for various biomedical applications such as fluorescence imaging and probing of biological systems.

Experimental

Materials

L-Cysteine hydrochlorides and cadmium nitrate tetrahydrate were purchased from Merck, Germany. The starburst dendrimers (PAMAM) of generation 2.0, 4.0, 5.0 (NH2terminated) and glutaraldehyde were obtained from Sigma Aldrich, Germany. Telluric acid (H2TeO4, 2H2O) and sodium borohydrate (NaBH4) were purchased from BDH.

Synthesis of CdTe Quantum Dots and CdTe–Dendrimer Conjugate

CdTe QDs were synthesized following our method as reported earlier [19,20]. An aqueous solution of Cd2+ ion (4.68 × 10−2 M) and L-cysteine (11.70 × 10−2 M) was prepared, and pH was adjusted to 11.2–11.8 (using Jenway 3345 ion meter). Then, NaHTe solution was added under nitrogen atmosphere. The resultant solution was refluxed at 100 °C. The as-prepared CdTe QD solutions were further diluted 10 times, and concentrations were so chosen that absorbance was kept <0.1 to avoid self-absorbance effects. The aqueous solution of 3.47 × 10−7 M PAMAM dendrimer of Generation 2, 4 or 5 was prepared, and few microlitres (10–50 μL) of these solutions were added to the different sets of 3 mL solution of CdTe QDs. In a typical synthesis of CdTe–Dendrimer conjugate, 3 mL aqueous solution of CdTe NPs (5 × 10−6 M) was mixed with 50 μL of glutaraldehyde (10% in water) and 1 mL dendrimer (7.0 × 10−6 M). The solution was allowed to react at room temperature for 24 h and dialyzed against the phosphate buffer.

Structural Characterization

UV-Vis absorption and photoluminescence (PL) spectra of nanoparticles solution were recorded on Shimadzu UV-1601PC and Perkin Elmer LS-55 luminescence spectrometer respectively. Size distribution of CdTe QDs was determined by dynamic light scattering spectrophotometer (Model DLS—nanoZS, Zetasizer, Nanoseries, Malvern Instruments). Samples were filtered several times through a 0.22-μm Millipore membrane filter prior to recording measurements. The Fourier transform infrared spectroscopy (FTIR) spectra were recorded with Perkin Elmer, Spectrum GX equipment using KBr pellet with a resolution of 2 cm−1. Transmission electron microscopy (TEM) was carried out on JEOL-2010 with acceleration voltage of 200 kV. A drop of as-prepared solution of CdTe–Dendrimer conjugate was placed on a carbon-coated copper grid of 300 meshes and dried before putting it on to the TEM sample chamber.

Results and Discussion

The as-synthesized CdTe QDs were stable and highly luminescent [19]. The FWHM (full-width at half maximum) of the PL spectrum is 36 nm, which suggests narrow size distribution. The average size of CdTe QDs was found to be 3.2 nm as determined from TEM images, which is in good agreement with the size (3.0 nm) determined from the correlation of particle size and optical band gap. Further, average size and size distribution of CdTe QDs obtained from UV spectra and TEM image were also supported by DLS histogram (dav = 3.4 nm with narrow size distribution).

The interaction of dendrimer with these QDs was followed by fluorescence spectroscopy. The fluorescence intensity of QDs was quenched, and the plot of F0/F against dendrimer concentration is linear (Fig. (Fig.1),1), which follows Stern-Volmer relation (Eq. 1),

equation image
(1)
Figure 1
Stern-Volmer plots for the PL quenching of CdTe QDs, (Here,F0andFare the PL intensities of the respective CdTe QDs in absence and presence of dendrimer, respectively)Insetdouble-logarithmic plot of the quenching of CdTe using Tedesco’s method

where F0 and F are the fluorescence intensities QDs in the absence and in the presence of quencher, KSV the Stern-Volmer constant. Additionally, binding constant (Kb) and binding capacity (n) were evaluated following the method of Tedesco et al. [21] (Eq. 2),

equation image
(2)

where F is the intensity of QDs saturated with the quencher. The binding constant Kb is obtained by plotting log (F0F)/(FF) versus log [Dendrimer]. A typical plot is shown in the inset of Fig. Fig.1.1. The slope of the plot gives the number of equivalent binding sites or binding capacity (n). The value of log [Dendrimer] at log (F0F)/(FF) = 0 equals to logarithm of dissociate constant (Kdiss), and the reciprocal of Kdiss is the binding constant (Kb). Both Stern-Volmer constants and binding constants were found to increase with increasing dendrimer generation (Table (Table1).1). With increasing dendrimer generation from 2 to 5, the quenching constant (KSV) increased by factor 20. The number of surface amine groups increases linearly with increasing dendrimer generation, and this results in increased interaction of QDs with the higher generation dendrimer. Similar studies, based on the formalism presented here, have been successfully used to evaluate the binding properties of nanoparticles to the biological macromolecules [21,22]. To establish nature of quenching, the effects of ionic strength as well as solvent polarity (solvents of different dielectric constants) on the quenching of QDs by dendrimer have been studied. Solvents of different dielectric constants were prepared by mixing methanol (ε = 33.0) and water (ε = 80.1) in different proportions. If electrostatic binding or charge transfer process is involved in the interaction, the quenching constant should be adversely affected by decreasing the polarity of the solvent [23]. Hence, quenching of CdTe QDs by dendrimer has been studied by changing the composition of the solvent. With decrease in the polarity of mixed solvent, the Stern-Volmer quenching constants decreased sharply (Table (Table2).2). The observed trend indicates that charge transfer might have occurred between CdTe QDs and dendrimer at the excited state, since there was no change in ground-state absorption spectrum of CdTe QDs in the presence of dendrimer. Greater the polarity of the solvent, more stable will be the product; hence, more quenching was observed in aqueous solution. In the solvent of reduced polarity (methanol), the charge transfer process gets hampered showing lesser quenching. Thus, it can be inferred that quenching is caused by the electrostatic interaction between CdTe QDs and dendrimer.

Table 1
Binding constants and binding capacity of dendrimer with CdTe QDs
Table 2
Effect of solvent polarity on Stern-Volmer (Ksv) constant

Hence, efforts have been made to bind the dendrimer molecules with QDsviacovalent bond. Here, the formation of CdTe–Dendrimer conjugate is followed through FTIR measurements. Figure Figure2illustrates2illustrates the FTIR spectra of CdTe, pure PAMAM dendrimer, and CdTe–Dendrimer conjugates. It appears that the band between 1,720 and 1,740 cm−1due to carbonyl groups of the glutaraldehyde disappeared during conjugation. This suggests that QDs are covalently attached to the dendrimer through the Schiff base linkages formed between carbonyl groups of glutaraldehyde with surface amino (NH2) groups of dendrimer as well as amino groups of the cysteine-capped CdTe QDs (Scheme (Scheme1).1). It is also observed that the band at 3,278 cm−1corresponding to the stretching mode of surface amine group (NH2) of dendrimer is present in the CdTe–Dendrimer conjugate. This suggests that a fraction of surface amine groups of dendrimer is used for coupling with QDs, and the rest remained unaffected during conjugation. Further, amide I and amides II bands at 1,634 and 1,556 cm−1are also invariant after binding of CdTe with dendrimer molecules. This observation confirms that this method of conjugation has enabled to produce covalently bonded, stable, highly fluorescent CdTe–dendrimer conjugate, keeping surface functionality of dendrimer available for biological applications, like sensing, labelling, drug delivery, etc.

Figure 2
FTIR spectra of CdTe, dendrimer and CdTe-dendrimer conjugate

Scheme 1

An external file that holds a picture, illustration, etc.
Object name is 1556-276X-4-937-i3.jpg

The synthetic route used to prepare the QDs-dendrimer conjugate

Figure Figure3illustrates3illustrates a typical TEM image of CdTe–Dendrimer conjugate. The size of the particles was about 3.6 nm. This shows a pattern of association of few particles, which is possibly due to conjugation of QDs with dendrimers which is not observed in case of CdTe QDs alone (Inset of Fig. Fig.3).3). Some particles agglomerated also due to dipolar interaction between dendrimers in aqueous medium.

Figure 3
TEM image of CdTe-dendrimer conjugate.Inseta typical TEM image of Cystein capped CdTe QDs

The luminescence spectrum of CdTe–Dendrimer conjugate showed a characteristic band-edge emission peak of CdTe QDs (centered at 580 nm), a 15-nm red shift from the pure QDs whose peak intensity was maximum at 565 nm (Fig. (Fig.4).4). The growth of NPs due to the reaction with linker molecule (G) may be responsible for spectral shift. This demonstrates that the frequency of the excitonic emission in QD–Dendrimer conjugate is lower than that of pure quantum dots. The quantum yield of QDs remained unaltered on conjugation with dendrimer. However, in comparison with organic dyes such as rhodamine [24], the QD-dendrimer system displays an emission spectrum that is nearly symmetric and of much narrower peak width, which is ideal for medical imaging diagnosis.

Figure 4
The normalized luminescence spectra of CdTe QDs before (dash dot line) and after conjugation with dendrimer (solid line)

Conclusions

In summary, binding constants (KsvandKb) and binding capacity (n) of dendrimer to CdTe QDs have been determined fluorimetrically on the basis of noncovalent interaction. Further, dendrimer molecules are attached to the QDs through covalent binding using Glutaraldehyde. The successful assembly of QDs and dendrimer with desired functionality has significant implications in material research and demands most extensive inquiries into the luminescent electronic and chemical properties of these unique building blocks as they are incorporated into new and functional nanostuctured materials. This approach may also be applicable for conjugation with other semiconductor nanoparticles. The combination of the spectroscopic characteristics of the nanocrytal with biomolecular function of dendrimer molecule can potentially make high impact on current biomedical technologies and possibly in nanoelectronics, microphotonics and related fields.

Acknowledgment

Transmission electron microscopy was carried out at Electron Microscopy Facility in Saha Institute of Nuclear Physics, Kolkata.

References

  • Gaponik N, Talapin DV, Rogach AL, Hoppe K, Shevchenko EV, Konowski A, Eychmüller A, Weller H, Phys J. Chem. 2002. p. 7177. COI number [1:CAS:528:DC%2BD38Xks1egsrg%3D]
  • Michalet X, Pinaud FF, Bentolila LA, Tsay JM, Doose S, Li JJ, Sundaresan G, Wu AM, Gambhir SS, Weiss S. Science. 2005. p. 538. COI number [1:CAS:528:DC%2BD2MXmslOhtw%3D%3D]; Bibcode number [2005Sci...307..538M] [PMC free article] [PubMed] [Cross Ref]
  • Costa-Fernández JM, Pereiro R, Sanz-Medel A. Trends. 2006. p. 207. [Cross Ref]
  • R. Baron, B. Wilner, I. Wilner, Chem. Commun. (Camb) 323 (2007) doi:10.1039/b610721b.
  • Goldman ER, Medintz IL, Whitley JL, Hayhurst A, Clapp AR, Uyeda HT, Deshchamps JR, Lassman ME, Mattoussi H. J. 2005. p. 6744. COI number [1:CAS:528:DC%2BD2MXjtFartLY%3D] [PubMed] [Cross Ref]
  • Moore DE, Patel K. Langmuir. 2001. p. 2541. COI number [1:CAS:528:DC%2BD3MXhvV2nu7g%3D] [Cross Ref]
  • A. Priyam, A. Chatterjee, S.K. Das, A. Saha, Chem. Commun. (Camb) 4122 (2005) doi:10.1039/b505960g. [PubMed]
  • Chatterjee A, Priyam A, Bhattacharya SC, Saha A. J. 2007. p. 764. [Cross Ref]
  • S. Ghosh, A. Priyam, S.C. Bhattacharya, A. Saha J. Fluoresc. (2009) doi:10.1007/s10895-009-0468-9. [PubMed]
  • Priyam A, Bhattacharya SC, Saha A. Phys. 2009. p. 520. COI number [1:CAS:528:DC%2BD1cXhsFCjsLvJ] [PubMed] [Cross Ref]
  • Priyam A, Chatterjee A, Bhattacharya SC, Saha A. Photochem. 2009. p. 362. COI number [1:CAS:528:DC%2BD1MXisV2kuro%3D] [PubMed] [Cross Ref]
  • Tomalia DA, Nayor A, Goddard WI. Angew. 1990. p. 138. [Cross Ref]
  • Christine D, Uchegbu IF, Scha¨tzlein AG. Adv. 2005. p. 2177. [PubMed] [Cross Ref]
  • Gillies ER, Réchet JMJ. Drug. 2005. p. 35. COI number [1:CAS:528:DC%2BD2MXoslSqug%3D%3D] [PubMed] [Cross Ref]
  • R. Shukla, T.P. Thomas, J.Peters, A. Kotlyar, A. Myc, J.R. Baker Chem. Commun. (Camb) 5739 (2005). doi:10.1039/b507350b. [PubMed]
  • Shi X, Thomas TP, Myc LA, Kotlar A, Baker JR. Phys. 2007. p. 5712. COI number [1:CAS:528:DC%2BD2sXht1Sgsr%2FJ] [PubMed] [Cross Ref]
  • Mamedova NN, Kotov NA, Rogach AL, Studer J. Nano. 2001. p. 281. COI number [1:CAS:528:DC%2BD3MXjsVOktbo%3D]; Bibcode number [2001NanoL...1..281M] [Cross Ref]
  • Guo Y, Shi D, Lian J, Dong Z, Wang W, Cho H, Liu G, Wang L, Ewing RC. Nanotechnology. 2008. p. 175102. Bibcode number [2008Nanot..19q5102G] [PubMed] [Cross Ref]
  • Priyam A, Chatterjee A, Bhattacharya SC, Saha A. J. 2007. p. 416. COI number [1:CAS:528:DC%2BD2sXlsFeqtrc%3D]; Bibcode number [2007JCrGr.304..416P] [Cross Ref]
  • Priyam A, Ghosh S, Bhattacharya SC, Saha A. J. 2009. p. 195. COI number [1:CAS:528:DC%2BD1MXjsVCmtb4%3D] [PubMed] [Cross Ref]
  • Tedesco AC, Oliveira DM. J. 2003. p. 6704. COI number [1:CAS:528:DC%2BD3sXjslSns70%3D]; Bibcode number [2003JAP....93.6704T] [Cross Ref]
  • Pan B, Gao F, He R, Cui D, Zhang Y. J. 2006. p. 151. COI number [1:CAS:528:DC%2BD28Xisl2rtb4%3D] [PubMed] [Cross Ref]
  • Dimitrijevic NM, Poluektov OG, Saponjic ZV, Rajh T. J. 2006. p. 25392. COI number [1:CAS:528:DC%2BD28XhtFSit7bN] [PubMed] [Cross Ref]
  • Chan WC, Maxwell DJ, Gao X, Bailey RE, Han M, Nie S. Curr. 2002. p. 40. COI number [1:CAS:528:DC%2BD38XhtF2itr0%3D] [PubMed] [Cross Ref]

Articles from Nanoscale Research Letters are provided here courtesy of Springer

Formats:

Related citations in PubMed

See reviews...See all...

Links

Recent Activity

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

See more...