• We are sorry, but NCBI web applications do not support your browser and may not function properly. More information
Logo of bmcprocBioMed Centralsearchsubmit a manuscriptregisterthis articleBMC Proceedings
BMC Proc. 2010; 4(Suppl 1): S12.
Published online Mar 31, 2010.
PMCID: PMC2857843

Bayesian multi-QTL mapping for growth curve parameters



Identification of QTL affecting a phenotype which is measured multiple times on the same experimental unit is not a trivial task because the repeated measures are not independent and in most cases show a trend in time. A complicating factor is that in most cases the mean increases non-linear with time as well as the variance. A two- step approach was used to analyze a simulated data set containing 1000 individuals with 5 measurements each. First the measurements were summarized in latent variables and subsequently a genome wide analysis was performed of these latent variables to identify segregating QTL using a Bayesian algorithm.


For each individual a logistic growth curve was fitted and three latent variables: asymptote (ASYM), inflection point (XMID) and scaling factor (SCAL) were estimated per individual. Applying an 'animal' model showed heritabilities of approximately 48% for ASYM and SCAL while the heritability for XMID was approximately 24%. The genome wide scan revealed four QTLs affecting ASYM, one QTL affecting XMID and four QTLs affecting SCAL. The size of the QTL differed. QTL with a larger effect could be more precisely located compared to QTL with small effect. The locations of the QTLs for separate parameters were very close in some cases and probably caused the genetic correlation observed between ASYM and XMID and SCAL respectively. None of the QTL appeared on chromosome five.


Repeated observations on individuals were affected by at least nine QTLs. For most QTL a precise location could be determined. The QTL for the inflection point (XMID) was difficult to pinpoint and might actually exist of two closely linked QTL on chromosome one.


Identification of QTL affecting a phenotype which is measured multiple times on the same experimental unit is not a trivial task because the repeated measures are not independent and in most cases show a trend in time. A complicating factor is that in most cases the mean increases non-linear with time as well as the variance, e.g. growth or yield. Another example is behavior, where a questionnaire involving many items is used to describe the phenotype, e.g. aggression. Also in this case multiple measurements have to be combined in order to detect QTL affecting such a trait. Mapping the genetic architecture of such a dynamic complex trait is called functional mapping and was reviewed by Wu and Lin [1]. Yang and Xu [2] applied functional mapping using a Bayesian shrinkage analyses with Legendre polynomials, which has the advantage that it will fit any trend in time but can be harder to interpret biologically.

Although simultaneous estimation of aggregate parameters and QTL affecting them in a hierarchical model would be best it will be difficult to implement it especially if genome wide marker data has to be analyzed. Therefore a two-step approach was used: first the repeated observations were summarized in latent variables and subsequently a genome wide analysis was performed using these latent variables as phenotypes.

The objective of this study was to identify segregating QTL affecting a simulated phenotype that was repeatedly measured on each individual, using a Bayesian algorithm.


In a 2 generation pedigree 5 males were combined with 20 females and produced 100 full sib families of 20 members each. Fifty percent of the families were repeatedly phenotyped for a yield trait. The five measurements were taken on day 1, 132, 265, 397 and 530. A full description of the dataset can be found at the website of XIIIth QTLmas workshop (http://www.qtlmas2009.wur.nl/UK/Dataset/).

Latent variable analysis

A logistic growth function was fitted to five measurements obtained on each of the 1000 individuals that were phenotyped using R [3]. A curve for each individual was fitted and the parameters were stored using the following model

Yij = (asym + asi) / (1 + exp( (t - (xmid + xmi)) / (scal + sci)) + eij

Where Yij is the phenotype of individual i on day t. An estimate was obtained for the asymptote, the time of inflection and the scaling factor. Asym, xmid and scal describe the overall mean curve for this population. Asi (ASYM), xmi (XMID) and sci (SCAL) describe the deviations of the overall curve for each individual.

Asreml [4] was used to determine the heritability of these latent variables (ASYM, XMID and SCAL) using a model including the overall mean and random 'animal' and residual effects which were assumed to be normally distributed i.e. u ~ N(0,Aσa2) and e ~ N(0,Iσe2).

QTL identification

QTL identification was done using a Bayesian Variable Selection Method (BVSM) [5]. The following model was fitted to each of the parameters of the growth curve separately:

param = μ + Σk σkX k άk + Zu + e


param is ASYM, XMID or SCAL for each individual and where terms Σk σkX k άk fit marker association effects, where άk is a vector with the allele substitution effects, with άk ~N(0, I) and σk is a scaling factor that shrinks allele effects and models the variance explained by the marker. The scaling factors are conditionally estimated as simple Normally distributed regressions, and can be interpreted as a standard deviation (hence the symbol σ). Zu fits polygenic background effects with u~N(0,Aσu2) with A the numerator relationship matrix between individuals derived from pedigree records. The error vector is e~N(0,Iσe2).

In the BVSM the shrinkage of allele effects, through the scaling factors σk, is done in a dualistic manner by applying a mixture distribution on the scaling factors that heavily shrinks the effects for most of the markers, effectively removing most of the markers from the model. Only a small part of the marker effects are less severely shrunken, identifying the markers with important associations. This prior mixture distribution is a mixture of a Normal and a Truncated Normal distribution:

equation image

where the first distribution is referred to as the "null" distribution that models the majority of markers with (virtually) no effect using π0 =0.70 and setting σg02 very small. Here σg02 was set to 0.01*(variance of the trait)/( π 0*(number of markers)), so that the markers in this group will jointly explain no more than 1% of variance in the trait. The second distribution models the markers with important effects. For this second distribution a truncated Normal is used so that the signs of the estimated allele effects will be identifiable, and the parameter σg12 is estimated from the data, using a flat prior. In this case with relative few markers π 0/ π 1 was set at 0.7/0.3. For the mixture prior, the model estimates a "mixture indicator" which for each marker indicates whether it was estimated to belong to the first distribution or the second distribution. The first distribution is indicated by 0 and the second one with 1, so that, after averaging in the MCMC, a value ranging from 0 to 1 which is a posterior probability for each marker to have a large effect (i.e. the probability to belong to the second distribution) and can be used for model selection [5].

Using a simultaneous fit of all markers as in the BVSM can cause the signal of a QTL to be spread over multiple markers, i.e. several markers may get a moderate posterior probability for association, but none of the markers may have a very high posterior probability. Although this properly indicates the uncertainty about a QTL position, the evidence for presence of a QTL in the region may still be high, i.e. a group of markers (but no individual marker) may have a high joint posterior probability for association. In order to retrieve the evidence for association of groups of markers two approaches were used: (1) haplotypes in a group of markers were recoded into "alleles" of a pseudo marker and these new pseudo markers were analyzed; and (2) a post- marker-analysis (PMA) was performed on the patterns of mixture indicators generated in the Markov chain by grouping marker signals in windows. Both methods are capable of identifying haplotypes or marker windows which have a high probability of having a signal, although each underlying single marker may only show a moderate signal. In the second approach, the primary joint Gibbs samples for the mixture indicators were used, which take account of the switches for adjacent markers being on or off, to derive the joint probability for having a signal in a window. If the mixture indicators show that more than one SNP within a window (of maximal 9 SNPs) has a high probability of being in the model, this is counted to determine the probability of multiple QTLs.

Applied MCMC techniques:

All samplers are single site Gibbs samplers. The particular parameterization with scaling factors was chosen so that scaling factors σk can be sampled as "regressions" from Normal distributions and with Normal prior distributions. A speeded-up version for models with the mixture prior was implemented in which marker effects are only updated with 20% probability if the marker is "not associated" (comes from the first mixture). Markers which are "associated" are always updated, and markers neighbouring ("associated" markers are updated with probability 0.8d where d is the ordinal distance to the associated marker, up to d=7, after which the update probability falls back to the default 20%.

Identification of associated markers

As indicated above, the posterior probability for a marker to come from the second mixture distribution can be used for model selection. We used two approaches to determine a cut-off on these posterior probabilities for the selection of significant associations, denoting the estimated posterior probability by An external file that holds a picture, illustration, etc.
Object name is 1753-6561-4-S1-S12-i4.gif and the prior probabilities used in the model by π0 and π1.

1. Analogous to the computation and use of the Bayes factor between two models we used here a "parameter-wise Bayes Factor" (pwBF) as the odds ration between posterior and prior probabilities for an individual marker:

equation image

Using guidelines by Kass and Raftery [6] to judge Bayes Factors, a value above 3.2 is "substantial", a value above 10 is "strong", and a value above 100 is "decisive".

2. Based on Conlon et al. [5] for a group of markers the sum of An external file that holds a picture, illustration, etc.
Object name is 1753-6561-4-S1-S12-i3.gif probabilities can also be used to indicate the false discovery rate (FDR): An external file that holds a picture, illustration, etc.
Object name is 1753-6561-4-S1-S12-i3.gif is the probability of erring when selecting a marker with posterior probability An external file that holds a picture, illustration, etc.
Object name is 1753-6561-4-S1-S12-i4.gif as true. Hence when the top m markers are selected, the FDR in this group is An external file that holds a picture, illustration, etc.
Object name is 1753-6561-4-S1-S12-i5.gif.


In Table Table11 the mean and phenotypic variance for the 3 latent variables: ASYM, XMID and SCAL (i.e. the parameters of the logistic growth curve) are given as well as their genetic parameters that were estimated using the standard animal model with ASreml. Heritabilities were around 48% for ASYM and SCAL while the heritability for XMID was approximately 24%. ASYM was genetically positively correlated with XMID and SCAL while the later two were not correlated. The genetic correlation could be due pleiotropic QTLs or to QTLs in close linkage disequilibrium. The assumption of a logistic growth curve underlying the data could be incorrect which could cause a spurious phenotypic correlation among the parameters but would less likely affect a genetic correlation.

Table 1
Mean, phenotypic variance and genetic parameters for the latent variables based on 5 observations per individual (n=1000). Heritabilities are on the diagonal and genetic correlations are below the diagonal (standard errors in brackets).

Table Table22 shows for each of the latent variables (ASYM, XMID and SCAL) the loci where markers picked up a significant amount of the variance indicating the presence of QTLs. Separate analyses were run for single SNPs as well as for haplotypes containing 2 SNPs.

Table 2
Loci associated with latent variables: asymptote (ASYM), inflection point (XMID) and scaling factor (SCAL) using haplotypes consisting of 1 and 2 SNPs.

In Figure Figure11 a graphical overview is given of the position of the QTLs with a high Bayes factor (pwBF). Four QTLs affected ASYM and the two most prominent ones (equally important) were found on chromosome 1 and 2 (positions 0.04447 and 1.0359-1.0516) while a QTL, half as important, was found at the end of chromosome two (position 1.8834). A small QTL affecting ASYM was detected on chromosome 4 (position 3.7168). For XMID a single QTL was detected on chromosome one (position 0.04153). For SCAL four QTLs were detected. Two large ones on chromosome 1 and 2 (position 0.9137 and 1.4852 respectively). Two smaller QTL were detected on chromosome four (position 30411-30827 and 3.8701). The positions of QTL for ASYM and XMID on chromosome one were near. Co- segregation of alleles for the two QTL probably cause the genetic correlation observed. Co-segregation of QTL-alleles for ASYM and SCAL on chromosome two and four might explain the genetic correlation between the two parameters. Table Table33 shows the region which were 'switched on' in a large number of the MCMC- samples. This analysis was based on analysis involving single SNPs. The results are very consistent with the previous analysis; however it indicates that the position of the QTL with a larger effect was more precise for ASYM and SCAL. The probability of more than one QTL in a region also increased when the size of the QTL was smaller. For XMID the position of the QTL was less clear according to the PMA- analysis and it also indicated a second QTL on the same chromosome. It could indicate that at least two QTL for XMID were segregating and due to co-segregation of positive/negative alleles for the two QTLs the positions remained obscure. Based on the results in Table Table33 the two QTLs positions were between 0.3401 and 0.4831.

Figure 1
Bayes Factor (pwBF = posterior odds/ prior odds) for SNP association with each of the latent variables: ASYM, XMID and SCAL.
Table 3
Post-marker-analysis (PMA) results: region where a significant signal was observed for each of the three latent variables: asymptote (ASYM), inflection point (XMID) and scaling factor (SCAL). Region size indicates the number of SNPs in a window.

For ASYM the pwBF indicated two QTLs on position 1.0359 and 1.0516. From Table Table3,3, however, it is clear that there is only one QTL in that region, i.e. the probability of more than one QTL is close to zero. The reverse is true for ASYM on position 1.8834 where the window-analysis showed a probability of 0.18 of having more than one QTL indicating that there might be 2 very close QTLs affecting ASYM. On chromosome 5 no QTL was detected for any of the latent variables.


The direct analysis of repeated measurements would not be a simple task because repeated observations will have strong correlations in time and typically show an increasing variance. An indirect approach as used here, which analyzes latent parameters of growth curves, is a much cleaner approach, obtaining variables that are less correlated, have constant variance, and possibly are also biologically more meaningful. For such an analysis of latent variables we used here a two step procedure, first defining latent variables and subsequent marker analyses of these variables, which is most likely not optimal. We envision that in the future they can be combined in a single analysis especially in a Bayesian context because it allows for hierarchical modeling as was shown by Yang and Xu [2]. In a single model the latent parameters can be modeled as well as the marker effect affecting these latent parameters. However, our software does not (yet) allow for this type of model. No test was applied to determine if QTL were pleiotropic or just in close LD. However, the software used to simulate the data set had not been used to generate such data sets (Coster, personal communication).

The Bayesian approach was found useful for multi-QTL mapping and obtains a good resolution, with suggestions for multiple closely linked QTLs. Simulation studies have also shown that the main advantage of this Bayesian approach is in the accuracy of QTL location (Sahana et al. in preparation). A multi-variate multi-QTL approach as applied by Meuwissen and Goddard [7] was not considered because this approach models variance-covariance matrices with multivariate Wishart distributions, which gives problematic convergence for the analysis of multiple highly correlated traits, such as the repeated weight measures in this study.

The Bayesian approach when run on single SNPs has the property that a QTL signal can be spread over multiple SNPs, thus masking possible important effects. This signal diffusion can be caused by uncertainty about the location of a QTL with a small effect, but also the signal of a 'large' QTL can get spread out over a group of strongly co-linear SNPs. The use of either haplotypes, or a post-marker-analysis that aggregates signals in windows appears a good approach to retrieve again clear QTL signals. The windowing approach has the advantage that only a single analysis needs to be made which can be post-analyzed with various window-settings. In these windows also the probability of having more than 1 signal can be computed which is lost when using haplotypes. The QTL for ASYM on position 1.8834 a loss of signal was observed, where the windowing approach indicated the possibility of 2 QTLs. Two closely positioned QTLs with effects in repulsion might explain this effect.

In Table Table4,4, the size of the QTL and the true location, which were provided by the organizers after the workshop, are given in the first two columns. Six QTL were simulated for each parameter of the logistic growth curve which was used to simulate the phenotypes. The latter 5 columns contain the estimated location and their significance levels based on our analysis for each of the 18 QTL. In some QTL regions more than one SNP was identified in our analysis, these are also shown in Table Table4.4. All QTL for ASYM and SCAL were actually found using the Bayesian algorithm, but for ASYM and SCAL two QTL did not meet our significance threshold of 0.05 for FDR. The five smaller QTL for XMID were not identified because there was virtually no information in the data to identify them as was shown during the workshop.

Table 4
Comparison of true and estimated location of all simulated QTL and their significance.


Repeated observations on individuals were affected by at least nine QTLs. For most QTL a precise location could be determined. The QTL for the inflection point (XMID) was difficult to pinpoint and might actually exist of two (or more) closely linked and segregating QTL on chromosome one.

Competing interests

The authors declare that they have no competing interests.

Authors' contributions

HH and LJ conceived the project. LJ developed the software (iBay). HH analyzed the data and together they wrote the paper.


This article has been published as part of BMC Proceedings Volume 4 Supplement 1, 2009: Proceedings of 13th European workshop on QTL mapping and marker assisted selection.

The full contents of the supplement are available online at http://www.biomedcentral.com/1753-6561/4?issue=S1.


  • Wu RL, Lin M. Opinion - Functional mapping - how to map and study the genetic architecture of dynamic complex traits. Nature Reviews Genetics. 2006;7:229–237. doi: 10.1038/nrg1804. [PubMed] [Cross Ref]
  • Yang RQ, Xu SZ. Bayesian shrinkage analysis of quantitative trait loci for dynamic traits. Genetics. 2007;176:1169–1185. doi: 10.1534/genetics.106.064279. [PMC free article] [PubMed] [Cross Ref]
  • R Development Core Team. R. A language and environment for statistical Computing. R Foundation for statistical computing, Vienna. 2007.
  • Gilmour AR, Gogel BJ, Cullis BR, Thompson R. ASReml user guide. Release 2.0 2006.
  • George EI, Mcculloch RE. Variable Selection Via Gibbs Sampling. Journal of the American Statistical Association. 1993;88:881–889. doi: 10.2307/2290777. [Cross Ref]
  • Kass RE, Raftery AE. Bayes Factors. Journal of the American Statistical Association. 1995;90:773–795. doi: 10.2307/2291091. [Cross Ref]
  • Meuwissen TH, Goddard ME. Mapping multiple QTL using linkage disequilibrium and linkage analysis information and multitrait data. Genet Sel Evol. 2004;36:261–279. doi: 10.1186/1297-9686-36-3-261. [PMC free article] [PubMed] [Cross Ref]

Articles from BMC Proceedings are provided here courtesy of BioMed Central


Related citations in PubMed

See reviews...See all...

Cited by other articles in PMC

See all...


  • PubMed
    PubMed citations for these articles

Recent Activity

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

See more...