• We are sorry, but NCBI web applications do not support your browser and may not function properly. More information
Logo of bmcgenoBioMed Centralsearchsubmit a manuscriptregisterthis articleBMC Genomics
BMC Genomics. 2010; 11: 21.
Published online Jan 11, 2010. doi:  10.1186/1471-2164-11-21
PMCID: PMC2827409

Effort required to finish shotgun-generated genome sequences differs significantly among vertebrates

Abstract

Background

The approaches for shotgun-based sequencing of vertebrate genomes are now well-established, and have resulted in the generation of numerous draft whole-genome sequence assemblies. In contrast, the process of refining those assemblies to improve contiguity and increase accuracy (known as 'sequence finishing') remains tedious, labor-intensive, and expensive. As a result, the vast majority of vertebrate genome sequences generated to date remain at a draft stage.

Results

To date, our genome sequencing efforts have focused on comparative studies of targeted genomic regions, requiring sequence finishing of large blocks of orthologous sequence (average size 0.5-2 Mb) from various subsets of 75 vertebrates. This experience has provided a unique opportunity to compare the relative effort required to finish shotgun-generated genome sequence assemblies from different species, which we report here. Importantly, we found that the sequence assemblies generated for the same orthologous regions from various vertebrates show substantial variation with respect to misassemblies and, in particular, the frequency and characteristics of sequence gaps. As a consequence, the work required to finish different species' sequences varied greatly. Application of the same standardized methods for finishing provided a novel opportunity to "assay" characteristics of genome sequences among many vertebrate species. It is important to note that many of the problems we have encountered during sequence finishing reflect unique architectural features of a particular vertebrate's genome, which in some cases may have important functional and/or evolutionary implications. Finally, based on our analyses, we have been able to improve our procedures to overcome some of these problems and to increase the overall efficiency of the sequence-finishing process, although significant challenges still remain.

Conclusion

Our findings have important implications for the eventual finishing of the draft whole-genome sequences that have now been generated for a large number of vertebrates.

Background

Currently, the standard and most efficient approach for the de novo generation of sequence from complex genomes (e.g., those of vertebrates) is 'shotgun sequencing' [1,2], although new technologies are emerging. In the initial 'shotgun' phase, large numbers of overlapping sequence reads are obtained at random from a large-insert clone or a whole genome, yielding highly redundant sequence data that typically represent the vast majority of the starting DNA. In the second 'finishing' (or refinement) phase, the resulting draft sequence assemblies are analyzed and refined, often with additional sequence data generated to improve continuity and accuracy. Through considerable effort, the sequence can be refined to near perfection--something sought by the Human Genome Project in generating a finished sequence of the human genome [3,4]. However, the generation of such high-quality genomic sequence requires extensive sequence-finishing efforts, which involve a low-throughput, craftsman-like process carried out by highly-skilled personnel performing both customized computational and experimental procedures. Alternatively, genomic sequence assemblies can be partially refined to less rigorous quality standards at a fraction of the cost and effort, with the resulting sequences still being extremely valuable for numerous applications, including comparative analyses [5-7]. Anecdotal experiences to date in sequencing vertebrate genomes have clearly revealed that each species' genome presents its own characteristic set of challenges. Meanwhile, draft (but not finished) whole-genome sequences have now been generated for a large number of mammalian and other vertebrate species [8,9], without clear plans for finishing these genome sequences.

The NISC Comparative Sequencing Program [10] has been extensively involved in inter-species sequence comparisons. Specifically, we have generated sequence data from many vertebrates in parallel, focusing our studies on targeted genomic regions (as opposed entire genomes). This work has involved isolating, mapping, and sequencing orthologous bacterial artificial chromosome (BAC) clones from the same well-defined 0.5-2 Mb regions [6,11] of multiple vertebrate genomes and systematically comparing the resulting sequences [6,7,12-20]. Our collective efforts to date have resulted in the generation of sequence for over 11,000 BACs isolated from 75 vertebrate species. The largest fraction of these data was produced as part of the ENCODE project [21].

In generating these BAC sequences, we have paid considerable attention to the sequence-finishing process. We routinely refine all BAC-derived sequence assemblies to produce 'comparative-grade' finished sequence [5], the quality specifications of which were specifically designed for inter-species sequence comparisons. Comparative-grade finished sequence is produced by establishing the order and orientation of sequence contigs greater than 2 kb in size, and then independently verifying the resulting sequence contig map by auxiliary data. Our studies have shown that the quality of comparative-grade finished sequence is very high, with residual gaps and errors mostly residing within repetitive sequences [5]. To date, a subset of our sequenced BACs (>925) have also been finished to the near-perfect standards established for sequencing the human genome [4], which we refer to as 'human-grade' finished sequence.

Our efforts in sequencing the same orthologous genomic regions in many different species and in producing two 'grades' of finished sequence for a large subset of BACs provided us a unique opportunity to examine results from application of the same standardized process to a variety of genome sequences. Here, we report a series of studies that reveal substantial differences in the effort required to finish shotgun-generated genome sequences from different vertebrates, reflecting significant architectural differences between orthologous regions of these vertebrate genomes.

Results

Sequence data sets

The nature of our comparative genome mapping and sequencing program [6,11] has required us to routinely sequence the DNA from many vertebrates. Our data and the anecdotal experiences of others have consistently suggested marked differences among species with respect to the effort required to refine (i.e., finish) shotgun-generated sequence assemblies, even for the same orthologous genomic region. To investigate these differences in a more systematic fashion, we generated and analyzed two comparable sequence data sets.

The first data set (Table (Table1)1) consists of the human-grade finished sequences generated for 541 BACs from 38 vertebrates, with all sequences orthologous to a 1.9-Mb genomic region (in human) encompassing the cystic fibrosis transmembrane conductance regulator gene (CFTR); this genomic segment corresponds to ENCODE pilot project region ENm001 [22,23]. The number of sequenced BACs and the total amount of sequence in the ENm001-derived multiple-BAC sequence assembly generated for each vertebrate are provided in Table Table1.1. A species' sequence was included in this data set if PipMaker-derived alignments [24] of that species' BAC sequences together covered at least 75% of the human ENm001 reference sequence. Importantly, comparative-grade finished sequence was also available for all 541 sequenced BACs in this first data set.

Table 1
Human-grade finished BAC sequences from ENm001.

The second data set consists of the comparative-grade finished sequences generated for 2,031 BACs from 21 vertebrate species (Table (Table2),2), with each sequence orthologous to one of 14 ENCODE pilot project regions (Table (Table3).3). The number of sequenced BACs and the total amount of sequence in the individual BAC clone sequences generated for each species (Table (Table2)2) or ENCODE region (Table (Table3)3) are listed. To be included in this data set, more than 75% of each of the ENCODE pilot project regions (Table (Table3)3) needed to be covered by PipMaker-derived alignments of comparative-grade finished sequence from that species (Table (Table2).2). Most of the BAC sequences in this second data set have not been refined to human-grade finished sequence. Because of insufficient sequence coverage, BAC sequences were not included in this second data set from three other ENCODE pilot project regions (ENr231, ENr232, and ENr333) that have unusual characteristics and were thus analyzed for illustrative purposes (e.g., see below); in these cases, the number of sequenced BACs (and total Mb of individual BAC clone sequences) for ENr231, EN232, and ENr333 were 64 (10.3 Mb), 51 (8.0 Mb), and 62 (10.0 Mb), respectively.

Table 2
Comparative-grade finished BAC sequences listed by species.
Table 3
Comparative-grade finished BAC sequences listed by ENCODE region.

Misassembled sequence

In shotgun sequencing, once a sufficient number of sequence reads are collected based on the size of the starting template (e.g., a BAC), the sequence is assembled computationally (such as with the program Phrap [25,26]). Even though the assembly program is operated under conditions we have optimized for our BAC sequences, occasionally an incorrect alignment occurs with closely related but distinct reads, resulting in a misassembled and incorrect consensus sequence. Misassemblies can result from various causes, such as the presence of multiple copies of closely-related repetitive sequences that inappropriately collapse onto one or a few regions. Often, misassemblies incorrectly portray non-adjacent segments as being contiguous. Such problems require manual correction, otherwise the sequence would be of marginal utility (e.g., for accurately identifying genes or characterizing the long-range organization of a genomic region). With the aid of sequence-editing programs, an experienced technician systematically reviews and sorts the misassembled reads, eventually correcting problems and allowing a valid consensus sequence to emerge. However, this manual intervention can be one of the most labor-intensive and costly components of the sequence-finishing process. Details of our sequence-finishing process are provided in the Supplementary Materials associated with Blakesley et al. [5].

We have consistently found that certain genomic regions are more prone to sequence misassemblies than others, regardless of the species being studied. For example, considerable effort was required to resolve misassembled sequences for more than 20% of all BACs from ENCODE pilot project regions ENr231 and ENr333; for the other ENCODE regions, less than 5% of the BACs needed such attention. Similarly, certain species stand out as being more prone to sequence misassemblies, regardless of the genomic region being sequenced. For example, baboon BAC sequences typically contain an unusually high frequency of long (2- to 43- kb) inverted and tandem repeats of >90% identity that greatly confound standard sequence-assembly routines. As another example, assembled hedgehog sequences often contained non-contiguous segments that had been incorrectly joined by Phrap. In these cases, more extensive manual effort was required to untangle the misassemblies.

We investigated alternative sequence-assembly programs to Phrap that provide 'read-pair awareness' as a means of reducing the amount of manual correction of the initial sequence assembly required. Of the many programs evaluated, rPhrap (Geospiza) [27] and Autosort (NFH, unpublished) showed the greatest promise. We thus tested these two sequence-assembly programs by having them assemble the sequence reads generated from 102 BACs that had previously been found to be associated with Phrap-induced sequence misassemblies. Improved sequence assemblies were generated for 68 of these BACs (with complete resolution for 29 BACs and reduction of minor misassemblies for 39 BACs). Direct comparison of the performance of each program revealed that one generally showed more improvement than the other for any particular BAC, but Autosort overall yielded improved assemblies for twice as many BACs as rPhrap. While these findings represent a positive development, it is important to note that these alternative sequence-assembly programs are actually less effective than Phrap for assembling average BAC sequences, due primarily to a great increase in the number of contigs and occasional generation of new misassemblies.

We also tested whether improved sequence assemblies could be generated by separately altering certain Phrap parameters. The shotgun sequence reads for ten of the above BACs were assembled using four different sets of Phrap parameters; each resulting assembly was then analyzed for features we have found to serve as a measure of the manual effort required for sequence finishing (specifically, the total number of contigs, misjoined sequences, uncaptured gaps, contigs which can be manually joined, and groups of reads to remove from contigs). Compared to the assemblies generated with our optimized Phrap parameters, those generated using the 'repeat stringency' set at 99 or 'shatter greedy' were inferior with respect to the above measures, and would have required substantial additional effort to complete the finishing process. Assemblies generated using 'revise greedy' or a 'forcelevel' of 3 (instead of 0) were found to be similar to our standard optimized Phrap assemblies. Based on analyses such as this, we have adopted a routine in which shotgun sequence reads are first assembled with Phrap using our optimized parameters; if problematic misassemblies are noted, the reads are then reassembled with rPhrap and separately with Autosort. The best of the three assemblies is then selected as a better starting point for further refinement, including manual resolution of more complex misassemblies.

Frequency of gaps

When inspecting a sequence assembly, one of the first features to assess is whether the consensus sequence is in a single piece or multiple pieces (i.e., contigs). An assembly consisting of more than one contig indicates that the sequencing procedure failed to generate sufficient sequence reads from the DNA residing between contigs (i.e., gaps). The number of sequence gaps is a first indicator of the amount of effort that will be required to finish an assembled sequence. Early in any sequence-finishing process, each contig must be manually inspected, looking for internal regions of low quality or inappropriately joined segments. As might be anticipated, contig ends typically contain poor-quality sequence, either due to individual sequence reads extending well beyond the average quality length or due to chimeric reads. The amount of effort required to manually inspect and refine contig ends is directly proportional to their number (each gap is associated with two flanking contig ends).

The impact of contig number is most pronounced during the steps involved in establishing contig order and orientation, a key part of the finishing process. One approach involves comparing in silico- and laboratory-generated restriction enzyme digestion-based fingerprints of a BAC. When the assembled sequence is distributed among numerous contigs, in silico-deduced restriction fragments become artificially broken, making it is nearly impossible to derive an accurate restriction enzyme digestion-based fingerprint from the many combinatorial possibilities. A second approach for ordering and orienting contigs involves aligning each contig to an orthologous reference sequence. Once again, interpreting the alignments of multiple small contigs in an assembled sequence is far more difficult than just a few large contigs (especially for sequences from species more distantly related to the reference sequence).

For these reasons, the number of gaps in an assembled sequence is a critical parameter for the sequence-finishing process. We analyzed the first data set for the presence of gaps in the comparative-grade finished sequence of the 541 BACs. Specifically, for each of the 38 species listed in Table Table1,1, we aligned the comparative-grade finished sequence of each BAC to the corresponding human-grade finished sequence for that species using the program Cross Match [28]. The resulting alignments were manually examined and corrected when contigs in the comparative-grade finished sequence had an ambiguous endpoint and/or order in the alignment. From the final alignments, we then catalogued the location, size, and sequence composition of all gaps in the comparative-grade finished sequence; further, the number of shotgun-library subclones spanning each gap (as detected by establishing the locations of all sequence reads in the human-grade finished sequence) was also determined. Across the 73.2 Mb of total sequence in the first data set (Table (Table1),1), we identified 1,528 gaps, corresponding to roughly 23 gaps per Mb. Notably, we found an identical frequency of gaps in an earlier study that involved analyzing the comparative-grade finished sequence of 116 vertebrate BACs [5]. Those 1,528 gaps together account for 1.1 Mb (or 1.5%) of the total sequence, and range in size from 1 bp to greater than 15 kb, with a median size of 250 bp; roughly a third (506) of the gaps are 500 bp or larger.

Examination of the simple aggregate statistics above fails to reveal the striking differences between individual species with respect to gaps in their assembled genome sequences. For example, the amount of sequence residing within gaps varied more than 15-fold among species (Figure (Figure1A).1A). For species like black lemur, tetraodon, and guinea pig, gap sizes are relatively small (~ 4 kb per Mb), whereas the gaps in shrew and platypus sequence correspond to an average of 36 and 58 kb per Mb, respectively. In the case of gap frequency, variation is less pronounced, i.e., less than fourfold for all but three of the 38 species; in fact, gap frequency ranged from 17 to 23 per Mb for over half of the species, near the overall median value of 20 gaps per Mb (Figure (Figure1B).1B). At the extremes for gap frequency are: (1) at the low end, black lemur and galago, with an average of 4 and 10 gaps per Mb, respectively; and (2) at the high end, platypus and torafugu, with an average of 42 and 48 gaps per Mb, respectively. A third characteristic, median gap size (Figure (Figure1C),1C), varies dramatically--from 67 bp for tetraodon to 523 bp for horseshoe bat; platypus is again at the high end, with a median gap size of 477 bp.

Figure 1
Gaps in comparative-grade finished BAC sequences from ENm001. The human- and comparative-grade finished sequences of the 541 BACs summarized in Table 1 were compared, and the gaps detected in the comparative-grade finished sequence were analyzed. Indicated ...

An overall comparison of frequency and size of sequence gaps indicates that some species' sequences (e.g., guinea pig and galago) have below average values; the finishing of these sequences is therefore more straightforward. Chicken sequences are intermediate, with a high frequency of relatively small gaps. Finally, at the extreme of difficulty are platypus sequences, which have substantially more gaps of larger size (compared to the overall averages).

Characteristics of sequences in gaps

The characteristics of the sequence within and immediately adjacent to a gap greatly influence the difficulty associated with filling that gap during sequence finishing. We thus examined the GC and repeat content of the sequence residing within gaps in the first data set, comparing those values to the overall averages for the total sequence generated for each species. The results for the 19 species with the greatest differences between gap sequence and total sequence are shown in Figure Figure22.

Figure 2
Characteristics of gaps in comparative-grade finished BAC sequences from ENm001. Sequences within the gaps (blue bars) summarized in Figure 1 were analyzed with respect to GC (A) and simple repeat (B) content; similar analyses were performed for the entire ...

For many species, the GC content of the gap sequence is only marginally different from the GC content of the total sequence (Figure (Figure2A).2A). For some species where large differences are noted (e.g., guinea pig, marmoset, and chicken), we have not found human-grade sequence finishing to be particularly difficult; the application of standard finishing strategies involving alternate sequencing reaction chemistry (e.g., 80:20 BigDye:dGTP BigDye or dGTP BigDye supplemented with SeqRxA) generally permits the generation of the missing sequence with minimal effort. However, this is not the case for other species. For example, the gaps in dog sequence average 57% GC content, considerably higher than the 40% GC content of the total sequence. One particular dog BAC sequence [GenBank:AC090445] contains a stretch of 2,100 bp with a GC content of 83%; an embedded gap of ~ 250 bp (85% GC content overall) was refractory to most routine gap-filling efforts and ultimately required an extraordinary finishing effort to close. Several other dog BAC sequences contain at least one gap that presented similar challenges during finishing. Interestingly, such high GC-content regions in dog sequence gaps often reside near CpG islands.

Previously, we found that sequence within gaps is disproportionately more repetitive than non-gap sequence; specifically, total repetitive sequences identified by the program RepeatMasker [29] account for roughly 50% of gap bases in comparative-grade finished sequence, while the subset of simple repeat sequences (predominantly homopolymer, as well as di-, tri, and tetranucleotide repeats) account for 3.7% of gap bases [5]. Further, it is well-established that these simple repeat sequences present major challenges during sequence finishing (e.g., determining the exact length of a dinucleotide repeat). We thus compared the simple repeat content of gap sequences for the species in the first data set (Figure (Figure2B).2B). In aggregate for all species, 2% of the total sequence corresponds to simple repeats, whereas 10% of the sequence in captured gaps corresponds to simple repeats. Thus, simple repeats are generally enriched within captured gaps. The considerable variability seen among species with respect to this enrichment (Figure (Figure2B)2B) is even more dramatic. At the extreme, dog has an unusually high amount of simple repeats in its gap sequence (28%); by comparison, in 26 of 37 other species, this value is less than 10%. Table Table44 details the repeat content within all the sequences of our first data set (taken as a whole) as well as that in captured and uncaptured gaps. In addition to again noting the significant enrichment of simple repeats within captured gaps, these data reveal that long interspersed repeats (LINES) are significantly enriched in uncaptured gaps.

Table 4
Repeat content of total sequences and gap sequences.

Captured versus uncaptured gaps

An early step in sequence finishing involves ordering and orienting contigs within the initial sequence assembly. This process extensively utilizes information about the paired forward- and reverse-primed sequence reads generated from each plasmid template during the shotgun phase. Two contig ends are considered adjacent to each other if two or more sequence reads in one contig connect to their plasmid 'mates' in the other contig; in such cases, the intervening gap is considered 'captured' by the spanning subclones. Furthermore, the calculated minimum distance between read pairs should not greatly exceed the average insert size of the subclone library. Sequence gaps not spanned by at least two appropriately spaced sequence read-pairs are deemed 'uncaptured' and add no spatial information to the sequence contig map. An assembly containing several uncaptured gaps can thus be quite challenging to finish, with other data required to deduce contig order and orientation; substantial additional effort is frequently involved during the finishing process, particularly in cases where the auxiliary data are weak or limited. Furthermore, generating the sequence of regions within captured gaps (e.g., during human-grade sequence finishing) is most readily achieved by sequencing the spanning plasmid subclones; in contrast, generating the sequence of regions within uncaptured gaps requires sequencing alternative templates (e.g., PCR products or purified BAC DNA), which is more costly and labor-intensive.

We analyzed the comparative-grade finished sequence generated for the 2,031 BACs in the second data set for the presence of captured and uncaptured gaps. In aggregate, these sequences contain roughly 30 gaps per Mb, with approximately two-thirds of these gaps being captured. This result is generally expected for shotgun sequence assemblies with at least eightfold sequence redundancy. However, the characteristics of the sequence gaps vary among genomic regions and among species (Figure (Figure3).3). For example, the average total number of gaps within the sequences generated for these 14 ENCODE pilot project regions ranges from 20 per Mb (ENr213) to 43 per Mb (ENm003), while the fraction of uncaptured gaps varies from 26% (ENm010) to 50% (ENr312) (Figure (Figure3A).3A). None of these are among the worst genomic regions with respect to gaps that we have encountered; the sequences generated for ENCODE pilot project regions ENr231, ENr232, and ENr333 (included in Figure Figure3A3A for comparison purposes, but not actually part of the second data set) contain more gaps per Mb (56, 68, and 48, respectively) than any of the other analyzed regions. Similar differences can be seen among the sequences from 21 species in the second data set, with the average total number of gaps ranging from 19 per Mb (galago) to 58 per Mb (platypus), while the fraction of uncaptured gaps varies from 21% (hedgehog) to 50% (elephant and tenrec) (Figure (Figure3B3B).

Figure 3
Gaps in comparative-grade finished BAC sequences from multiple genomic regions. The comparative-grade finished sequences of the 2,031 BACs summarized in Tables 2 and 3 were analyzed for the presence of uncaptured (orange bar) and captured (blue bar) gaps ...

The effort required for establishing the order and orientation of sequence contigs--a key part of the sequence-finishing process--directly relates to the number of uncaptured gaps in the sequence assembly. While total gaps per Mb is an important metric to monitor, in practice, it is the presence of two or more uncaptured gaps in a given BAC sequence assembly that presents a significant challenge during sequence finishing. Within the second data set, the fraction of BAC sequence assemblies containing two or more uncaptured gaps ranged from 16% (ENr213) to 47% (ENm003) among the different ENCODE pilot project regions and 12% (vervet) to 60% (platypus) among the different species. BAC sequences from ENCODE regions ENm003, ENm005, ENr111, ENr211 and ENr312 (as well as ENr333 and ENr231) have routinely required extra finishing effort, mostly because over 40% of the sequence assemblies contained two or more uncaptured gaps. Meanwhile, in the case of vervet and squirrel BACs, nearly all sequence assemblies contained fully ordered and oriented contigs, since few of these BAC sequences had two or more uncaptured gaps. In contrast, platypus BAC sequence assemblies had an average of over eight gaps per BAC, with more than 44% of those gaps being uncaptured; this characteristic (in addition to other features of platypus sequence mentioned above) has made the finishing of platypus sequence more challenging than that of any other species' sequence encountered to date.

Strategies for reducing sequence gaps

In recent years, we have implemented various steps to reduce the number of gaps in our BAC sequence assemblies. For example, in the case of sequence assemblies containing two or more uncaptured gaps, we often will construct fosmid shotgun libraries from the starting BAC DNA, and then generate a modest number (e.g., 96) of sequence read-pairs from fosmid insert-ends. The resulting fosmid clones often capture the DNA residing in previously uncaptured gaps, thereby helping to order and orient the sequence contigs. While effective, such a fosmid-based approach is labor-intensive and expensive; it also introduces delays in finishing a BAC sequence because of the manual nature of fosmid-library construction and subclone-DNA purification. Of note, this approach has not been particularly successful for some species (e.g., platypus). In these cases, the sequence assemblies frequently contain too many contigs that cannot be unequivocally ordered even with fosmid-derived read-pairs (in part because the fosmid insert is too large, with the resulting insert-end reads simply skipping over many contigs and gaps). As an alternative, we found that generating read pairs with a 10- kb insert plasmid library was more productive.

Another approach that we have implemented involves the use of an alternate bacterial host strain for constructing the initial shotgun plasmid library. We reasoned that uncaptured gaps might reflect regions of foreign DNA that are 'poisonous' to the bacterial host, with subclones propagating such DNA in high copy-number plasmids either failing to grow or growing poorly [30-32]. Thus, a host that constrained plasmid copy number might reduce any bacterial growth inhibition, yielding a more uniform distribution of sequence reads across the starting template.

To test this idea, we selected three previously generated BAC sequences (produced using our standard bacterial host: E. coli DH10B tonA). Aliquots of the ligation reactions, which earlier produced the initial shotgun libraries, were used to separately transform competent cells of copy-control E. coli strain EPI400 (Epicentre Biotechnologies); BAC sequencing was then performed per our usual routine, after which we compared assemblies from sequence reads obtained with each host strain. Representative results from those comparisons are shown in Figure Figure44 for a portion (~ 20 to 60 kb) of each of the three BACs. Note the greater uniformity in sequence-read redundancy obtained with the copy-control host strain and the elimination of gaps in two of the BAC sequences.

Figure 4
Variation in the redundancy of sequence reads generated using shotgun libraries prepared with standard and copy-control E. coli strains. A shotgun-subclone library was prepared from each of three BACs [GenBank: ...

Based on these initial findings, we performed a similar study with eight additional BACs. Using our standard host strain, the sequence assembly of each of these clones had ≥ 5 uncaptured gaps (Table (Table5).5). An additional two BACs [GenBank:AC190000 and GenBank:AC188356] (see Table Table5)5) were included as controls, with their sequence assemblies having 2 and 0 uncaptured gaps, respectively. In most cases, the sequence assemblies generated using the copy-control host cells contained a greatly reduced total number of gaps (especially uncaptured gaps; see Table Table5).5). In several cases, the total number of uncaptured gaps was reduced to <2, thereby eliminating the challenge of ordering and orienting sequence contigs. Interestingly, a significant reduction in the number of gaps per BAC is associated with decreased variation in sequence-read redundancy; we now use this correlation to predict whether a particular BAC sequence assembly with many gaps would benefit from the extra effort of preparing a supplementary shotgun library with copy-control competent cells.

Table 5
BAC sequence assemblies generated using standard versus copy-control bacterial host cells.

Several points should be made about using such copy-control host strains for shotgun-library construction. First, because there is some reduction in the yields of purified plasmid DNA (and, therefore, sequencing success rates and read lengths) associated with the use of EPI400 cells, we only utilize copy-control host strains in special cases. For example, for species (e.g., platypus) whose initial sequence assemblies regularly have large numbers of gaps, we now routinely use copy-control EPI400 cells during the initial shotgun phase; for other species, these cells are used only after the BAC sequence assembly is reviewed and deemed to require such an approach {with the key determinant being a large variation in sequence-read redundancy (as seen in Figure Figure4)4) rather than simply the total number of uncaptured gaps}. Finally, implementing the use of a copy-control host strain is straightforward in a high-throughput sequencing pipeline, making it a convenient and practical option on an as-needed basis. In practice, competent cells derived from the copy-control host strain are simply transformed by the original ligation reaction, eliminating the need to construct an entirely new library in an alternate cloning vector.

Utilization of 'next-generation' sequencing technologies

Recently, several 'next-generation' DNA sequencing technologies have become commercially available [33-35]. These involve the use of completely different methods for generating shotgun-sequence data, with the resulting sequence reads being considerably shorter than those generated by Sanger-based chemistries (but at a fraction of the per-base cost). We investigated whether data produced with one of these new technologies without cloning bias might complement our standard Sanger-based shotgun sequence reads in a fashion that reduced the problems encountered during sequence finishing.

We selected 12 BACs for this study: 10 whose sequence was previously found to be problematic at the sequence-finishing stage and 2 whose sequence was straightforward to finish (these BACs were derived from 8 different species and 7 different genomic regions). The purified DNA from each BAC was sheared and then ligated with a unique 'indexing' linker. All 12 samples were then mixed together, and the resulting pool then used to make a single shotgun sequencing library using the Genome Analyzer instrument (Illumina) [33]. The resulting paired sequence reads (each being 35 bases in length) were sorted by BAC using the respective indices, with each set of reads then assembled using Velvet [36]; the resulting sequence contigs for each BAC were then assembled with the original Sanger-based shotgun reads using Phrap. Preliminary results showed that the Velvet-derived sequence assemblies differed among the 12 BACs; for example, contig 'N50' size varied from 0.2 to 7 kb, with the 'largest contig' per BAC ranging from 2.8 to 24 kb. Of the contig sequences (totalling 2.35 Mb) that aligned to the Sanger-derived consensus sequences, there were few, if any, mismatches; thus, the quality of the Genome Analyzer-derived assembled sequence was extremely high.

Combining the Sanger- and Genome Analyzer-derived shotgun sequence data simplified some of the sequence-finishing process, but did not solve the most vexing finishing problems. For example, in some cases, the use of Velvet-assembled contigs helped to extend sequence from contig ends, provided complementary strand data, and resolved miscellaneous ambiguities (thereby eliminating the need to generate additional sequence reads during the finishing process). In fact, adding Genome Analyzer-derived data to the Sanger-derived assemblies reduced the total number of contigs for the 10 problematic BACs; for five BACs, a few of the uncaptured gaps were closed. However, new problems sometimes arose with the addition of Velvet-assembled contigs; for example, in several instances, new misassemblies formed where none existed in the Sanger-derived assembly. Most disappointing was the fact that many troublesome gaps in the Sanger-derived assemblies, which had been extremely problematic (and expensive) to close during human-grade sequence finishing, remained unchanged following the incorporation of Velvet-assembled contigs. Although some small contigs were found to partially fill these gaps, much of the missing sequence had no matching Genome Analyzer-derived sequence. These results point out the biases and limitations of both sequencing methods that utilize DNA polymerase.

Discussion and conclusions

The refinement of sequence assemblies generated from shotgun reads (i.e., sequence finishing) is a multi-step procedure that is influenced by various features of the starting template. Some of these features can present major problems during the sequence-finishing process; the most common being gaps (missing sequence) of various types and characteristics, and sequence misassemblies. Here, we present some representative findings based on our experience in finishing in a standardized fashion the sequence of over 11,000 BACs from 75 different vertebrate species. This unique data resource allows for a rigorous assessment of the requirements for finishing sequence of diverse origins; the current study reveals substantial differences in the effort needed to finish the sequence from different genomic regions and, in particular, from different species.

While our experience provides the opportunity to generate quantitative summaries about the comparative grade-finished assemblies of shotgun sequence from various sources (e.g., Figures Figures1,1, ,22 and and3),3), it also allows general qualitative conclusions to be drawn. For example, we have found that assembled shotgun sequence from: (1) rabbit and platypus sequences contain a higher than average number of SINEs and LINEs in and around regions associated with gaps, making the design of unique PCR primers for capturing the missing DNA impossible; (2) owl monkey, colobus monkey and tenrec sequence assemblies are often associated with regions of up to 2 kb that are biased with respect to the strand from which the shotgun reads were derived; (3) shrew and platypus are associated with a high frequency of large, uncaptured gaps; (4) dog and shrew are associated with gaps whose underlying sequence has a high GC content; and (5) baboon is associated with frequent misassemblies. Especially troublesome was the finding that hedgehog BACs are often associated with large deletions (50-100 kb) that occur during culturing of the clones prior to DNA extraction. In addition to the conclusions derived from analyzing the data sets reported here, we have gained considerable experience finishing sequences from other vertebrates. Based on this experience, we have found that: (1) little brown bat sequence assemblies are associated with numerous problematic dinucleotide repeats and a high frequency of uncaptured gaps whose underlying sequence has a high GC content; (2) opossum sequences are associated with large stretches of dinucleotide repeats at contig ends, often causing non-contiguous sequences to be incorrectly joined during assembly; and (3) echidna assemblies are associated with a high frequency of large, uncaptured gaps and with numerous problematic dinucleotide repeats. Interestingly, such features of the assembled sequence actually point to characteristic differences in genomic architecture among species.

The insights gained from examining the underlying causes of sequence-finishing problems have allowed us to develop approaches to improve the finishing process, in some cases through proactive steps implemented in a species-specific fashion. For example, changing the host strain used for propagating shotgun subclones can improve the representation of certain sequences and reduce problems associated with sequence gaps. The use of different assembly programs can in some cases help to reduce the frequency and severity of misassembled sequences. Finally, relevant to recent technological advances, supplementing Sanger-derived shotgun reads with sequence data generated with a 'next-generation' DNA sequencing platform (e.g., an Illumina Genome Analyzer) can recover some of the sequence that is otherwise missing in initial assemblies. We are investigating further alternative approaches for employing these new platforms in generating sequence data that are more complete, reducing the effort required for finishing (unpublished data).

However, our experience also confirms the continued labor-intensive nature of sequence finishing and the absence of any 'magic bullet' that resolves all major sequence-finishing problems. Some of the most challenging sequences to finish are from species for which a draft genome sequence has already been generated and currently sits at a draft stage, such as for dog [37] and platypus [38]. In fact, draft whole-genome sequences of various levels of completion have been generated for most of the more than 30 species studied here [8,9]. Our findings may provide important insights that will aid future efforts to refine those draft sequence assemblies. If high-quality finished sequences are eventually to be produced for all of these vertebrate genomes, then continued vigilance about understanding the general and species-specific challenges associated with sequence finishing will be needed, as will methodological advances to further reduce the cost and to improve the efficiency of the sequence-finishing process.

Methods

Sequence generation

Purified BAC DNA was sheared and 'shotgun subcloned' into plasmids containing 3- to 5- kb inserts using E. coli DH10B tonA host cells (Invitrogen). Plasmid DNA was purified from individual subclones by an automated magnetic bead process (Agencourt Bioscience). Paired sequence reads were generated from randomly selected subclones by universal forward- and reverse-primed fluorescent dideoxy sequencing reactions [1,2] using AB3730xl sequencing instruments (Applied Biosystems). Typically, 2,500-2,800 sequence reads were generated for each BAC (which averaged ~ 165 kb in size), with the resulting Phrap-based [25,26] sequence assembly consistently providing at least eight-fold redundancy of the starting BAC.

Sequence finishing

Sequence assemblies were refined to produce comparative-grade finished sequence; this process, described in detail by Blakesley et al. [5], including a summary of the step-by-step procedures within the Supplementary Materials of that paper, mostly involved a series of computational procedures that yields an ordered and oriented map of all sequence contigs greater than 2 kb in size. That map was routinely verified with independent data, including sequence derived from overlapping BACs, alignments with orthologous sequence from another species, and/or results of PCR-based experiments to confirm contig adjacency. A subset of the BACs was further finished to the 'human-grade' standards established for sequencing the human genome [4,39]. The GenBank accession numbers for all sequenced BACs analyzed here are available on request.

All sequencing reactions for the shotgun phase and most reactions for the finishing phase employed Big-Dye Terminator chemistry (Applied Biosystems) as described by the manufacturer. Certain other sequence finishing reactions used alternative chemistries, where dGTP BigDye Terminator Mix (Applied Biosystems) or an 80:20 mixture of BigDye:dGTP Big Dye substituted for BigDye Terminator Mix in the sequencing reaction mixture. In certain cases, one-tenth volume of SeqRxA (Invitrogen) was added to the reaction.

Authors' contributions

RWB, NFH, JCM, BM, GGB, and EDG conceived the study. NFH led the bioinformatics analyses, with contributions from JCM, BM, GGB, and RWB. JG, BBB, SYB, HC, PH, S-LH, KS, SS, JLV, PJT and members of the NISC Comparative Sequencing Program generated the data and performed some of the bioinformatic analyses. RWB, NFH, and EDG wrote the manuscript.

Acknowledgements

We thank all participants of the NISC Comparative Sequencing Program (participants include A Antonellis, K Ayele, D Bass, SM Beckstrom-Sternberg, CP Brinkley, K Cariaga, G Chu, I Chub, M Dekhtyar, NL Dietrich, J Engle, T Fuksenko, M Gestole, S Granite, M Gregory, X Guan, N Gurson, P Hall, E Han, J Han, A Hargrove, K Hines-Harris, J Hodax, P Hu, B Hurle, JR Idol, T Johnson, E Karlins, P Laric, SQ Lee-Lin, R Legaspi, S Lovett, M Madden, QL Maduro, VB Maduro, EH Margulies, CA Masiello, SD Mastrian, C Montemayor, JC Mullikin, J Myrick, E Novotny, M Park, R Pearson, A Palumbo, ME Portnoy, AB Prasad, O Puri, C Ramsahoye, N Reddix-Dugue, N Riebow, A Sante, B Schmidt, MG Schueler, C Sison, L Smith, A Taye, JW Thomas, EE Tiongson, JW Touchman, C Tsurgeon, V Tsipouri, MA Walker, KD Wetherby, LS Wiggins, TR Withers, and AC Young) for their contributions to the studies described here. We also thank Hatice Abaan, Paul Havlak, and Elliott Margulies (NHGRI) for sharing unpublished Genome Analyzer sequencing data. We thank Kim Kyung and Robert Fulton (WUGSC) for providing sequence of the small gap in our dog BAC [GenBank: AC090445]. We also thank Alice Young (NISC), Rick Myers, and Richards Gibbs for critical feedback about this manuscript. This work was supported by the Intramural Research Program of the National Human Genome Research Institute, National Institutes of Health.

References

  • Wilson RK, Mardis ER. In: Genome Analysis: A laboratory manual: Analyzing DNA. Birren B, Green ED, Klapholz S, Myers RM, Roskams J, editor. Vol. 1. Cold Spring Harbor, NY: Cold Spring Harbor Laboratory Press; 1997. Shotgun sequencing; pp. 397–454.
  • Green ED. Strategies for the systematic sequencing of complex genomes. Nat Rev Genet. 2001;2:573–583. doi: 10.1038/35084503. [PubMed] [Cross Ref]
  • International Human Genome Sequencing Consortium. Initial sequencing and analysis of the human genome. Nature. 2001;409:860–921. doi: 10.1038/35057062. [PubMed] [Cross Ref]
  • International Human Genome Sequencing Consortium. Finishing the euchromatic sequence of the human genome. Nature. 2004;431:931–945. doi: 10.1038/nature03001. [PubMed] [Cross Ref]
  • Blakesley RW, Hansen NF, Mullikin JC, Thomas PJ, McDowell JC, Maskeri B, Young AC, Benjamin B, Brooks SY, Coleman BI, Gupta J, Ho S-L, Karlins EM, Maduro QL, Stantripop S, Tsurgeon C, Vogt JL, Walker MA, Masiello CA, Guan X. NISC Comparative Sequencing Program. Bouffard GG, Green ED. An intermediate grade of finished genomic sequence suitable for comparative analysis. Genome Res. 2004;14:2235–2244. doi: 10.1101/gr.2648404. [PMC free article] [PubMed] [Cross Ref]
  • Thomas JW, Touchman JW, Blakesley RW, Bouffard GG, Beckstrom-Sternberg SM, Margulies EH, Blanchette M, Siepel AC, Thomas PJ, McDowell JC, Maskeri B, Hansen NF, Schwartz MS, Weber RJ, Kent WJ, Karolchik D, Bruen TC, Bevan R, Cutler DJ, Schwartz S, Elnitski L, Idol JR, Prasad AB, Lee-Lin SQ, Maduro VV, Summers TJ, Portnoy ME, Dietrich NL, Akhter N, Ayele K, Benjamin B, Cariaga K, Brinkley CP, Brooks SY, Granite S, Guan X, Gupta J, Haghighi P, Ho S-L, Huang MC, Karlins E, Laric PL, Legaspi R, Lim MJ, Maduro QL, Masiello CA, Mastrian SD, McCloskey JC, Pearson R, Stantripop S, Tiongson EE, Tran JT, Tsurgeon C, Vogt JL, Walker MA, Wetherby KD, Wiggins LS, Young AC, Zhang LH, Osoegawa K, Zhu B, Zhao B, Shu CL, De Jong PJ, Lawrence CE, Smit AF, Chakravarti A, Haussler D, Green P, Miller W, Green ED. Comparative analyses of multi-species sequences from targeted genomic regions. Nature. 2003;424:788–793. doi: 10.1038/nature01858. [PubMed] [Cross Ref]
  • Margulies EH, Cooper GM, Asimenos G, Thomas DJ, Dewey CN, Siepel A, Birney E, Keefe D, Schwartz AS, Hou M, Taylor J, Nikolaev S, Montoya-Burgos JI, Löytynoja A, Whelan S, Pardi F, Massingham T, Brown JB, Bickel P, Holmes I, Mullikin JC, Ureta-Vidal A, Paten B, Stone EA, Rosenbloom KR, Kent WJ, Bouffard GG, Guan X, Hansen NF, Idol JR, Maduro VV, Maskeri B, McDowell JC, Park M, Thomas PJ, Young AC, Blakesley RW, Muzny DM, Sodergren E, Wheeler DA, Worley KC, Jiang H, Weinstock GM, Gibbs RA, Graves T, Fulton R, Mardis ER, Wilson RK, Clamp M, Cuff J, Gnerre S, Jaffe DB, Chang JL, Lindblad-Toh K, Lander ES, Hinrichs A, Trumbower H, Clawson H, Zweig A, Kuhn RM, Barber G, Harte R, Karolchik D, Field MA, Moore RA, Matthewson CA, Schein JE, Marra MA, Antonarakis SE, Batzoglou S, Goldman N, Hardison R, Haussler D, Miller W, Pachter L, Green ED, Sidow A. Analyses of deep mammalian sequence alignments and constraint predictions for 1% of the human genome. Genome Res. 2007;17:760–774. doi: 10.1101/gr.6034307. [PMC free article] [PubMed] [Cross Ref]
  • International Sequencing Consortium, Large-Scale Sequencing Database. http://www.intlgenome.org/viewDatabase.cfm
  • NCBI Entrez Genome Project Database. http://www.ncbi.nlm.nih.gov/sites/entrez?db=genomeprj
  • NIH Intramural Sequencing Center. http://www.nisc.nih.gov
  • Thomas JW, Prasad AB, Summers TJ, Lee-Lin SQ, Maduro VV, Idol JR, Ryan JF, Thomas PJ, McDowell JC, Green ED. Parallel construction of orthologous sequence-ready clone contig maps in multiple species. Genome Res. 2002;12:1277–1285. doi: 10.1101/gr.283202. [PMC free article] [PubMed] [Cross Ref]
  • Margulies EH, Blanchette M. NISC Comparative Sequencing Program. Haussler D, Green ED. Identification and characterization of multi-species conserved sequences. Genome Res. 2003;13:2507–2518. doi: 10.1101/gr.1602203. [PMC free article] [PubMed] [Cross Ref]
  • Angata T, Margulies EH, Green ED, Varki A. Large-scale sequencing of the CD33-related Siglec gene cluster in five mammalian species reveals rapid evolution by multiple mechanisms. Proc Natl Acad Sci USA. 2004;101:13251–13256. doi: 10.1073/pnas.0404833101. [PMC free article] [PubMed] [Cross Ref]
  • Hurle B, Swanson W. NISC Comparative Sequencing Program. Green ED. Comparative sequence analysis reveals rapid and divergent evolutionary changes of the WFDC locus in the primate lineage. Genome Res. 2007;17:276–286. doi: 10.1101/gr.6004607. [PMC free article] [PubMed] [Cross Ref]
  • Margulies EH. NISC Comparative Sequencing Program. Maduro VV, Thomas PJ, Tomkins JP, Amemiya CT, Luo M, Green ED. Comparative sequencing provides insights about the structure and conservation of marsupial and monotreme genomes. Proc Natl Acad Sci USA. 2005;102:3354–3359. doi: 10.1073/pnas.0408539102. [PMC free article] [PubMed] [Cross Ref]
  • Mortlock DP, Portnoy ME, Chandler RL. NISC Comparative Sequencing Program. Green ED. Comparative sequence analysis of the Gdf6 locus reveals a duplicon-mediated chromosomal rearrangement in rodents and rapidly diverging coding and regulatory sequences. Genomics. 2004;84:814–823. doi: 10.1016/j.ygeno.2004.07.009. [PubMed] [Cross Ref]
  • Portnoy ME, McDermott KJ, Antonellis A, Margulies EH, Prasad AB. NISC Comparative Sequencing Program. Kingsley DM, Green ED, Mortlock DP. Detection of potential GDF6 regulatory elements by multispecies sequence comparisons and identification of a skeletal joint enhancer. Genomics. 2005;86:295–305. doi: 10.1016/j.ygeno.2005.05.003. [PubMed] [Cross Ref]
  • Schueler MG, Dunn JM, Bird CP, Ross MT, Viggiano L. NISC Comparative Sequencing Program. Rocchi M, Willard HF, Green ED. Progressive proximal expansion of the primate X chromosome centromere. Proc Natl Acad Sci USA. 2005;102:10563–10568. doi: 10.1073/pnas.0503346102. [PMC free article] [PubMed] [Cross Ref]
  • Prasad AB, Allard MW. NISC Comparative Sequencing Program. Green ED. Confirming the phylogeny of mammals by use of large comparative sequence data sets. Mol Biol Evol. 2008;25:1795–1808. doi: 10.1093/molbev/msn104. [PMC free article] [PubMed] [Cross Ref]
  • Tsipouri V, Schueler MG, Hu S. NISC Comparative Sequencing Program. Dutra A, Pak E, Riethman H, Green ED. Comparative sequence analyses reveal sites of ancestral chromosomal fusions in the Indian muntjac genome. Genome Biol. 2008;9:R155. doi: 10.1186/gb-2008-9-10-r155. [PMC free article] [PubMed] [Cross Ref]
  • ENCODE Project Consortium; Birney E, Stamatoyannopoulos JA, Dutta A, Guigó R, Gingeras TR, Margulies EH, Weng Z, Snyder M, Dermitzakis ET, Thurman RE, Kuehn MS, Taylor CM, Neph S, Koch CM, Asthana S, Malhotra A, Adzhubei I, Greenbaum JA, Andrews RM, Flicek P, Boyle PJ, Cao H, Carter NP, Clelland GK, Davis S, Day N, Dhami P, Dillon SC, Dorschner MO, Fiegler H, Giresi PG, Goldy J, Hawrylycz M, Haydock A, Humbert R, James KD, Johnson BE, Johnson EM, Frum TT, Rosenzweig ER, Karnani N, Lee K, Lefebvre GC, Navas PA, Neri F, Parker SC, Sabo PJ, Sandstrom R, Shafer A, Vetrie D, Weaver M, Wilcox S, Yu M, Collins FS, Dekker J, Lieb JD, Tullius TD, Crawford GE, Sunyaev S, Noble WS, Dunham I, Denoeud F, Reymond A, Kapranov P, Rozowsky J, Zheng D, Castelo R, Frankish A, Harrow J, Ghosh S, Sandelin A, Hofacker IL, Baertsch R, Keefe D, Dike S, Cheng J, Hirsch HA, Sekinger EA, Lagarde J, Abril JF, Shahab A, Flamm C, Fried C, Hackermüller J, Hertel J, Lindemeyer M, Missal K, Tanzer A, Washietl S, Korbel J, Emanuelsson O, Pedersen JS, Holroyd N, Taylor R, Swarbreck D, Matthews N, Dickson MC, Thomas DJ, Weirauch MT, Gilbert J, Drenkow J, Bell I, Zhao X, Srinivasan KG, Sung WK, Ooi HS, Chiu KP, Foissac S, Alioto T, Brent M, Pachter L, Tress ML, Valencia A, Choo SW, Choo CY, Ucla C, Manzano C, Wyss C, Cheung E, Clark TG, Brown JB, Ganesh M, Patel S, Tammana H, Chrast J, Henrichsen CN, Kai C, Kawai J, Nagalakshmi U, Wu J, Lian Z, Lian J, Newburger P, Zhang X, Bickel P, Mattick JS, Carninci P, Hayashizaki Y, Weissman S, Hubbard T, Myers RM, Rogers J, Stadler PF, Lowe TM, Wei CL, Ruan Y, Struhl K, Gerstein M, Antonarakis SE, Fu Y, Green ED, Karaöz U, Siepel A, Taylor J, Liefer LA, Wetterstrand KA, Good PJ, Feingold EA, Guyer MS, Cooper GM, Asimenos G, Dewey CN, Hou M, Nikolaev S, Montoya-Burgos JI, Löytynoja A, Whelan S, Pardi F, Massingham T, Huang H, Zhang NR, Holmes I, Mullikin JC, Ureta-Vidal A, Paten B, Seringhaus M, Church D, Rosenbloom K, Kent WJ, Stone EA. NISC Comparative Sequencing Program; Baylor College of Medicine Human Genome Sequencing Center; Washington University Genome Sequencing Center; Broad Institute; Children's Hospital Oakland Research Institute. Batzoglou S, Goldman N, Hardison RC, Haussler D, Miller W, Sidow A, Trinklein ND, Zhang ZD, Barrera L, Stuart R, King DC, Ameur A, Enroth S, Bieda MC, Kim J, Bhinge AA, Jiang N, Liu J, Yao F, Vega VB, Lee CW, Ng P, Shahab A, Yang A, Moqtaderi Z, Zhu Z, Xu X, Squazzo S, Oberley MJ, Inman D, Singer MA, Richmond TA, Munn KJ, Rada-Iglesias A, Wallerman O, Komorowski J, Fowler JC, Couttet P, Bruce AW, Dovey OM, Ellis PD, Langford CF, Nix DA, Euskirchen G, Hartman S, Urban AE, Kraus P, Van Calcar S, Heintzman N, Kim TH, Wang K, Qu C, Hon G, Luna R, Glass CK, Rosenfeld MG, Aldred SF, Cooper SJ, Halees A, Lin JM, Shulha HP, Zhang X, Xu M, Haidar JN, Yu Y, Ruan Y, Iyer VR, Green RD, Wadelius C, Farnham PJ, Ren B, Harte RA, Hinrichs AS, Trumbower H, Clawson H, Hillman-Jackson J, Zweig AS, Smith K, Thakkapallayil A, Barber G, Kuhn RM, Karolchik D, Armengol L, Bird CP, de Bakker PI, Kern AD, Lopez-Bigas N, Martin JD, Stranger BE, Woodroffe A, Davydov E, Dimas A, Eyras E, Hallgrímsdóttir IB, Huppert J, Zody MC, Abecasis GR, Estivill X, Bouffard GG, Guan X, Hansen NF, Idol JR, Maduro VV, Maskeri B, McDowell JC, Park M, Thomas PJ, Young AC, Blakesley RW, Muzny DM, Sodergren E, Wheeler DA, Worley KC, Jiang H, Weinstock GM, Gibbs RA, Graves T, Fulton R, Mardis ER, Wilson RK, Clamp M, Cuff J, Gnerre S, Jaffe DB, Chang JL, Lindblad-Toh K, Lander ES, Koriabine M, Nefedov M, Osoegawa K, Yoshinaga Y, Zhu B, de Jong PJ. Identification and analysis of functional elements in 1% of the human genome by the ENCODE pilot project. Nature. 2007;447:799–816. doi: 10.1038/nature05874. [PMC free article] [PubMed] [Cross Ref]
  • ENCODE Project Consortium. The ENCODE (ENCyclopedia Of DNA Elements) Project. Science. 2004;306:636–640. doi: 10.1126/science.1105136. [PubMed] [Cross Ref]
  • ENCODE Data Coordination Center at UCSC. http://genome.ucsc.edu/ENCODE
  • Schwartz S, Zhang Z, Frazer KA, Smit A, Riemer C, Bouck J, Gibbs R, Hardison R, Miller W. PipMaker--a web server for aligning two genomic DNA sequences. Genome Res. 2000;10:577–586. doi: 10.1101/gr.10.4.577. [PMC free article] [PubMed] [Cross Ref]
  • Ewing B, Green P. Base-calling of automated sequencer traces using Phred. II. Error probabilities. Genome Res. 1998;8:186–194. [PubMed]
  • Ewing B, Hillier L, Wendl M, Green P. Base-calling of automated sequencer traces using Phred. I. Accuracy assessment. Genome Res. 1998;8:175–185. [PubMed]
  • Geospiza: rPhrap. http://www.geospiza.com/research/rphrap
  • Laboratory of Phil Green: Phred, Phrap, Consed. http://www.phrap.org/phredphrapconsed.html
  • Smit AFA, Hubley R, Green P. RepeatMasker Open-3.0. 1996. http://www.repeatmasker.org
  • Chissoe SL, Marra MA, Hillier L, Brinkman R, Wilson RK, Waterson RH. Representation of cloned genomic sequences in two sequencing vectors: Correlation of DNA sequence and subclone distribution. Nucleic Acids Res. 1997;25:2960–2966. doi: 10.1093/nar/25.15.2960. [PMC free article] [PubMed] [Cross Ref]
  • Ishiura M, Hazumi N, Koide T, Uchida T, Okada Y. A recB recC sbcB recJ host prevents recA-independent deletions in recombinant cosmid DNA propagated in Esherichia coli. J Bacteriol. 1989;171:1068–1074. [PMC free article] [PubMed]
  • Razin SV, Ioudinkova ES, Trifonov EN, Scherrer K. Non-clonability correlates with genomic instability: A case study of a unique DNA region. J Mol Biol. 2001;307:481–486. doi: 10.1006/jmbi.2000.4372. [PubMed] [Cross Ref]
  • Bentley DR, Balasubramanian S, Swerdlow HP, Smith GP, Milton J, Brown CG, Hall KP, Evers DJ, Barnes CL, Bignell HR, Boutell JM, Bryant J, Carter RJ, Keira Cheetham R, Cox AJ, Ellis DJ, Flatbush MR, Gormley NA, Humphray SJ, Irving LJ, Karbelashvili MS, Kirk SM, Li H, Liu X, Maisinger KS, Murray LJ, Obradovic B, Ost T, Parkinson ML, Pratt MR, Rasolonjatovo IM, Reed MT, Rigatti R, Rodighiero C, Ross MT, Sabot A, Sankar SV, Scally A, Schroth GP, Smith ME, Smith VP, Spiridou A, Torrance PE, Tzonev SS, Vermaas EH, Walter K, Wu X, Zhang L, Alam MD, Anastasi C, Aniebo IC, Bailey DM, Bancarz IR, Banerjee S, Barbour SG, Baybayan PA, Benoit VA, Benson KF, Bevis C, Black PJ, Boodhun A, Brennan JS, Bridgham JA, Brown RC, Brown AA, Buermann DH, Bundu AA, Burrows JC, Carter NP, Castillo N, Chiara E, Catenazzi M, Chang S, NeilCooley R, Crake NR, Dada OO, Diakoumakos KD, Dominguez-Fernandez B, Earnshaw DJ, Egbujor UC, Elmore DW, Etchin SS, Ewan MR, Fedurco M, Fraser LJ, Fuentes Fajardo KV, Scott Furey W, George D, Gietzen KJ, Goddard CP, Golda GS, Granieri PA, Green DE, Gustafson DL, Hansen NF, Harnish K, Haudenschild CD, Heyer NI, Hims MM, Ho JT, Horgan AM, Hoschler K, Hurwitz S, Ivanov DV, Johnson MQ, James T, Huw Jones TA, Kang GD, Kerelska TH, Kersey AD, Khrebtukova I, Kindwall AP, Kingsbury Z, Kokko-Gonzales PI, Kumar A, Laurent MA, Lawley CT, Lee SE, Lee X, Liao AK, Loch JA, Lok M, Luo S, Mammen RM, Martin JW, McCauley PG, McNitt P, Mehta P, Moon KW, Mullens JW, Newington T, Ning Z, Ling Ng B, Novo SM, O'Neill MJ, Osborne MA, Osnowski A, Ostadan O, Paraschos LL, Pickering L, Pike AC, Pike AC, Chris Pinkard D, Pliskin DP, Podhasky J, Quijano VJ, Raczy C, Rae VH, Rawlings SR, Chiva Rodriguez A, Roe PM, Rogers J, Rogert Bacigalupo MC, Romanov N, Romieu A, Roth RK, Rourke NJ, Ruediger ST, Rusman E, Sanches-Kuiper RM, Schenker MR, Seoane JM, Shaw RJ, Shiver MK, Short SW, Sizto NL, Sluis JP, Smith MA, Ernest Sohna Sohna J, Spence EJ, Stevens K, Sutton N, Szajkowski L, Tregidgo CL, Turcatti G, Vandevondele S, Verhovsky Y, Virk SM, Wakelin S, Walcott GC, Wang J, Worsley GJ, Yan J, Yau L, Zuerlein M, Rogers J, Mullikin JC, Hurles ME, McCooke NJ, West JS, Oaks FL, Lundberg PL, Klenerman D, Durbin R, Smith AJ. Accurate whole human genome sequencing using reversible terminator chemistry. Nature. 2008;456:53–59. doi: 10.1038/nature07517. [PMC free article] [PubMed] [Cross Ref]
  • Margulies M, Egholm M, Altman WE, Attiya S, Bader JS, Bemben LA, Berka J, Braverman MS, Chen YJ, Chen Z, Dewell SB, Du L, Fierro JM, Gomes XV, Godwin BC, He W, Helgesen S, Ho CH, Irzyk GP, Jando SC, Alenquer ML, Jarvie TP, Jirage KB, Kim JB, Knight JR, Lanza JR, Leamon JH, Lefkowitz SM, Lei M, Li J, Lohman KL, Lu H, Makhijani VB, McDade KE, McKenna MP, Myers EW, Nickerson E, Nobile JR, Plant R, Puc BP, Ronan MT, Roth GT, Sarkis GJ, Simons JF, Simpson JW, Srinivasan M, Tartaro KR, Tomasz A, Vogt KA, Volkmer GA, Wang SH, Wang Y, Weiner MP, Yu P, Begley RF, Rothberg JM. Genome sequencing in microfabricated high-density picolitre reactors. Nature. 2005;437:376–380. [PMC free article] [PubMed]
  • Shendure J, Porreca GJ, Reppas NB, Lin X, McCutcheon JP, Rosenbaum AM, Wang MD, Zhang K, Mitra RD, Church GM. Accurate multiplex polony sequencing of an evolved bacterial genome. Science. 2005;309:1728–1732. doi: 10.1126/science.1117389. [PubMed] [Cross Ref]
  • Zerbino DR, Birney E. Velvet: algorithms for de novo short read assembly using de Bruijn graphs. Genome Res. 2008;18:821–829. doi: 10.1101/gr.074492.107. [PMC free article] [PubMed] [Cross Ref]
  • Lindblad-Toh K, Wade CM, Mikkelsen TS, Karlsson EK, Jaffe DB, Kamal M, Clamp M, Chang JL, Kulbokas EJ 3rd, Zody MC, Mauceli E, Xie X, Breen M, Wayne RK, Ostrander EA, Ponting CP, Galibert F, Smith DR, DeJong PJ, Kirkness E, Alvarez P, Biagi T, Brockman W, Butler J, Chin CW, Cook A, Cuff J, Daly MJ, DeCaprio D, Gnerre S, Grabherr M, Kellis M, Kleber M, Bardeleben C, Goodstadt L, Heger A, Hitte C, Kim L, Koepfli KP, Parker HG, Pollinger JP, Searle SM, Sutter NB, Thomas R, Webber C, Baldwin J, Abebe A, Abouelleil A, Aftuck L, Ait-Zahra M, Aldredge T, Allen N, An P, Anderson S, Antoine C, Arachchi H, Aslam A, Ayotte L, Bachantsang P, Barry A, Bayul T, Benamara M, Berlin A, Bessette D, Blitshteyn B, Bloom T, Blye J, Boguslavskiy L, Bonnet C, Boukhgalter B, Brown A, Cahill P, Calixte N, Camarata J, Cheshatsang Y, Chu J, Citroen M, Collymore A, Cooke P, Dawoe T, Daza R, Decktor K, DeGray S, Dhargay N, Dooley K, Dooley K, Dorje P, Dorjee K, Dorris L, Duffey N, Dupes A, Egbiremolen O, Elong R, Falk J, Farina A, Faro S, Ferguson D, Ferreira P, Fisher S, FitzGerald M, Foley K, Foley C, Franke A, Friedrich D, Gage D, Garber M, Gearin G, Giannoukos G, Goode T, Goyette A, Graham J, Grandbois E, Gyaltsen K, Hafez N, Hagopian D, Hagos B, Hall J, Healy C, Hegarty R, Honan T, Horn A, Houde N, Hughes L, Hunnicutt L, Husby M, Jester B, Jones C, Kamat A, Kanga B, Kells C, Khazanovich D, Kieu AC, Kisner P, Kumar M, Lance K, Landers T, Lara M, Lee W, Leger JP, Lennon N, Leuper L, LeVine S, Liu J, Liu X, Lokyitsang Y, Lokyitsang T, Lui A, Macdonald J, Major J, Marabella R, Maru K, Matthews C, McDonough S, Mehta T, Meldrim J, Melnikov A, Meneus L, Mihalev A, Mihova T, Miller K, Mittelman R, Mlenga V, Mulrain L, Munson G, Navidi A, Naylor J, Nguyen T, Nguyen N, Nguyen C, Nguyen T, Nicol R, Norbu N, Norbu C, Novod N, Nyima T, Olandt P, O'Neill B, O'Neill K, Osman S, Oyono L, Patti C, Perrin D, Phunkhang P, Pierre F, Priest M, Rachupka A, Raghuraman S, Rameau R, Ray V, Raymond C, Rege F, Rise C, Rogers J, Rogov P, Sahalie J, Settipalli S, Sharpe T, Shea T, Sheehan M, Sherpa N, Shi J, Shih D, Sloan J, Smith C, Sparrow T, Stalker J, Stange-Thomann N, Stavropoulos S, Stone C, Stone S, Sykes S, Tchuinga P, Tenzing P, Tesfaye S, Thoulutsang D, Thoulutsang Y, Topham K, Topping I, Tsamla T, Vassiliev H, Venkataraman V, Vo A, Wangchuk T, Wangdi T, Weiand M, Wilkinson J, Wilson A, Yadav S, Yang S, Yang X, Young G, Yu Q, Zainoun J, Zembek L, Zimmer A, Lander ES. Genome sequence, comparative analysis and haplotype structure of the domestic dog. Nature. 2005;438:803–819. doi: 10.1038/nature04338. [PubMed] [Cross Ref]
  • Warren WC, Hillier LW, Marshall Graves JA, Birney E, Ponting CP, Grützner F, Belov K, Miller W, Clarke L, Chinwalla AT, Yang SP, Heger A, Locke DP, Miethke P, Waters PD, Veyrunes F, Fulton L, Fulton B, Graves T, Wallis J, Puente XS, López-Otín C, Ordóñez GR, Eichler EE, Chen L, Cheng Z, Deakin JE, Alsop A, Thompson K, Kirby P, Papenfuss AT, Wakefield MJ, Olender T, Lancet D, Huttley GA, Smit AF, Pask A, Temple-Smith P, Batzer MA, Walker JA, Konkel MK, Harris RS, Whittington CM, Wong ES, Gemmell NJ, Buschiazzo E, Vargas Jentzsch IM, Merkel A, Schmitz J, Zemann A, Churakov G, Kriegs JO, Brosius J, Murchison EP, Sachidanandam R, Smith C, Hannon GJ, Tsend-Ayush E, McMillan D, Attenborough R, Rens W, Ferguson-Smith M, Lefèvre CM, Sharp JA, Nicholas KR, Ray DA, Kube M, Reinhardt R, Pringle TH, Taylor J, Jones RC, Nixon B, Dacheux JL, Niwa H, Sekita Y, Huang X, Stark A, Kheradpour P, Kellis M, Flicek P, Chen Y, Webber C, Hardison R, Nelson J, Hallsworth-Pepin K, Delehaunty K, Markovic C, Minx P, Feng Y, Kremitzki C, Mitreva M, Glasscock J, Wylie T, Wohldmann P, Thiru P, Nhan MN, Pohl CS, Smith SM, Hou S, Nefedov M, de Jong PJ, Renfree MB, Mardis ER, Wilson RK. Genome analysis of the platypus reveals unique signatures of evolution. Nature. 2008;453:175–183. doi: 10.1038/nature06936. [PMC free article] [PubMed] [Cross Ref]
  • NHGRI: Standard Finishing Practices and Annotation of Problem Regions for the Human Genome Project. http://www.genome.gov/10001812

Articles from BMC Genomics are provided here courtesy of BioMed Central

Formats:

Related citations in PubMed

See reviews...See all...

Cited by other articles in PMC

See all...

Links

Recent Activity

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

See more...