• We are sorry, but NCBI web applications do not support your browser and may not function properly. More information
Logo of jbiolengBioMed CentralBiomed Central Web Sitesearchsubmit a manuscriptregisterthis articleJournal of Biological EngineeringJournal Front Page
J Biol Eng. 2009; 3: 18.
Published online Oct 16, 2009. doi:  10.1186/1754-1611-3-18
PMCID: PMC2774284

Fluorometric determination of ethidium bromide efflux kinetics in Escherichia coli

Abstract

Background

Efflux pump activity has been associated with multidrug resistance phenotypes in bacteria, compromising the effectiveness of antimicrobial therapy. The development of methods for the early detection and quantification of drug transport across the bacterial cell wall is a tool essential to understand and overcome this type of drug resistance mechanism. This approach was developed to study the transport of the efflux pump substrate ethidium bromide (EtBr) across the cell envelope of Escherichia coli K-12 and derivatives, differing in the expression of their efflux systems.

Results

EtBr transport across the cell envelope of E. coli K-12 and derivatives was analysed by a semi-automated fluorometric method. Accumulation and efflux of EtBr was studied under limiting energy supply (absence of glucose and low temperature) and in the presence and absence of the efflux pump inhibitor, chlorpromazine. The bulk fluorescence variations were also observed by single-cell flow cytometry analysis, revealing that once inside the cells, leakage of EtBr does not occur and that efflux is mediated by active transport. The importance of AcrAB-TolC, the main efflux system of E. coli, in the extrusion of EtBr was evidenced by comparing strains with different levels of AcrAB expression. An experimental model was developed to describe the transport kinetics in the three strains. The model integrates passive entry (influx) and active efflux of EtBr, and discriminates different degrees of efflux between the studied strains that vary in the activity of their efflux systems, as evident from the calculated efflux rates: An external file that holds a picture, illustration, etc.
Object name is 1754-1611-3-18-i1.gif = 0.0173 ± 0.0057 min-1; An external file that holds a picture, illustration, etc.
Object name is 1754-1611-3-18-i2.gif = 0.0106 ± 0.0033 min-1; and An external file that holds a picture, illustration, etc.
Object name is 1754-1611-3-18-i3.gif = 0.0230 ± 0.0075 min-1.

Conclusion

The combined use of a semi-automated fluorometric method and an experimental model allowed quantifying EtBr transport in E. coli strains that differ in their overall efflux activity. This methodology can be used for the early detection of differences in the drug efflux capacity in bacteria accounting for antibiotic resistance, as well as for expedite screening of new drug efflux inhibitors libraries and transport studies across the bacterial cell wall.

Background

Efflux pumps are major defensive components of the bacterial cell wall that actively extrude noxious compounds from the periplasm and/or cytoplasm, thereby decreasing their intracellular concentration [1,2]. Active efflux of antibiotics by bacteria was first described in 1978 in Escherichia coli resistant to tetracycline [3] and, since then, it has been proven that the constitutive or inductive expression of these systems is responsible for the intrinsic and acquired resistance of many bacterial species to antimicrobials [4,5]. Bacterial efflux pumps may be divided into five categories, according to their bioenergetics and structural characteristics: the ATP-Binding Cassette (ABC) superfamily, the Major Facilitator Superfamily (MFS), the Resistance Nodulation cell Division (RND) family, the Small Multidrug Resistance (SMR) family and the Multidrug And Toxic compound Extrusion (MATE) family [5-7]. Efflux pumps may be specific for one substrate or recognize a wide range of structurally dissimilar and unrelated compounds, including several classes of antibiotics [7,8]. In E. coli, the most common commensal Gram-negative bacterium of the human gut, at least nine proton dependent efflux pumps responsible for multidrug resistant (MDR) phenotypes have been described [2,9-11]. Among these, the tripartite AcrAB-TolC system is recognized as the most important multi-component efflux system and is composed of: (i) AcrB, an inner membrane protein that functions as the transporter component of the pump; (ii) TolC, the protein that traverses the cell envelope and provides a conduit to the exterior; and (iii) AcrA, two periplasmic embedded membrane proteins that anchor TolC to the plasma membrane [12]. The AcrAB-TolC system is responsible for the extrusion of substrates from the periplasm and/or the cytoplasm. The over-expression of this efflux system is a major cause of the MDR phenotype of clinical isolates, due to its ability to extrude several classes of antibiotics [2,10,13]. Although AcrAB-TolC is considered the most important efflux system of E. coli, other tripartite efflux pumps, such as the AcrEF-TolC can extrude similar substrates albeit at lower efficiency levels. Moreover, these pumps can be over-expressed when AcrAB is deleted or inactivated [8,11,13,14].

Several methods have been used to detect and quantify the activity of bacterial efflux pump systems using radio-labeled, metal-labeled or fluorescent substrates to monitor their efflux in bacterial cells [15-21]. Bulk measurement techniques that use fluorescence spectroscopy yield a general understanding that represents the balance between entry and extrusion of a given substrate, which may result from the efflux activities of one or several pumps [17,19], and where cell membrane permeability also plays an important role [11,14]. Because the permeability to the substrate may be regulated by a decreased number of porins or by an increase of the lipopolysaccharide layer of the cell envelope [11,14], the demonstration of efflux activity invariably involves the use of an agent that promotes a significant increase of substrate accumulated [19,22,23]. Unless the demonstration of the role of a specific efflux pump is readily made, i.e. by the quantification of the expression level of a specific transporter [11,13], or by the use of mutants whose specific efflux pump has been deleted or inactivated [10], very little can be said about the role that any efflux pump system may play in the MDR phenotype of bacteria.

Recently, a semi-automated fluorometric method has been developed by us for the assessment of efflux pump activity in bulk bacterial cells [22]. The method uses the common efflux pump substrate ethidium bromide (EtBr) that has been shown to be a particularly suitable probe for these studies. In fact it emits weak fluorescence in aqueous solution (external to the cell) and becomes strongly fluorescent when its concentration within the periplasm exceeds that of the aqueous solution due to its binding to cellular components [16]. Such binding must be of a weak type if the agent is to serve as a useful probe for efflux, since later intercalation into DNA results in strong binding that precludes any dissociation of the substrate for efflux [16,17]. This method can distinguish accumulation, which reflects the balance between influx and efflux, from efflux itself [22] and, therefore, has the potential for the study of the kinetics of EtBr transport. The method was developed using the wild-type E. coli K-12 AG100 as the bacterial model and the accumulation and efflux of EtBr was monitored by real-time fluorometry using the Rotor-Gene™ 3000 from Corbett Research (Sydney, Australia) [22-24]. The major innovation of this method is the simultaneous evaluation of efflux pump activity in vivo and on-line of a large number of samples, with the possibility to expose the same cell preparation to different environmental conditions in a single assay.

In the study to be described herein, this method has been used to define and parameterize a mechanistic experimental model that demonstrates the kinetics of EtBr influx and efflux by E. coli strains that differ in their capacity to extrude this molecule. The determination of the influx and efflux rates (k+ and k-, respectively) of a fluorescent substrate by the approach proposed allows the quantification of the cell overall efflux capacity. This information can be useful to interpret different phenotypes resulting from this efflux activity, including multidrug resistance in clinical bacterial strains.

Methods

Bacteria

The following bacteria were employed in this study: E. coli K-12 AG100 wild-type strain (argE3 thi-l rpsL xyl mtl Δ(gal-uvrB) supE44), containing a fully functional AcrAB-TolC efflux pump system; E. coli AG100A (ΔacrAB::Tn903 Kanr) with the AcrAB-TolC efflux pump system inactivated due to the insertion of the transposon Tn903 in the acrAB operon [10]; and E. coli AG100TET, a AG100 progeny strain, induced to high level of resistance to tetracycline (able to survive in 10 μg/ml of tetracycline, with an MIC of 12 μg/ml), as previously described, and over-expressing several efflux pumps, among which acrAB shows the highest expression level when exposed to high levels of tetracycline [11,13]. E. coli K-12 AG100 and AG100A have been previously characterized and were kindly offered by Hiroshi Nikaido (University of California, Berkeley, California, USA) [10]. Bacterial cultures were grown in Luria-Bertani (LB) medium at 37°C with agitation (220 rpm). Cultures of AG100A and AG100TET were supplemented with 100 μg/ml of kanamycin and 10 μg/ml of tetracycline, respectively.

Reagents

Phosphate Buffered Solution (PBS), glucose, EtBr, kanamycin, ciprofloxacin, ofloxacin, chloramphenicol, erythromycin, tetracycline and chlorpromazine (CPZ) were purchased from Sigma-Aldrich Química SA (Madrid, Spain). EtBr solutions were stored at 4°C and protected from light. Tetracycline stock solution was prepared in methanol, whereas kanamycin, ciprofloxacin, ofloxacin, erythromycin and CPZ were prepared in distilled water and filtered with 0.22 μm syringe filters (Millipore Corporation, Bedford, USA). Chloramphenicol stock solution was prepared in ethanol. All working solutions were prepared in distilled water on the day of the experiment. LB medium was purchased from Difco (Detroit, Michigan, USA). Mueller-Hinton (MH) broth medium was purchased from Oxoid (Basingstoke, Hampshire, UK).

Determination of minimum inhibitory concentrations (MICs)

The MICs for EtBr, the efflux pump inhibitor (EPI) CPZ, kanamycin, ciprofloxacin, ofloxacin, chloramphenicol, erythromycin and tetracycline were determined by the broth microdilution method in 96-well microtitre plates according to the CLSI guidelines [25]. Briefly, bacterial strains were incubated overnight in 5 ml of MH broth at 37°C with shaking at 220 rpm. Bacterial cultures were then diluted in PBS to a McFarland 0.5 turbidity standard. Aliquots of 0.05 ml were transferred to each well of the 96-well plate that contained 0.15 ml of each compound at concentrations prepared at 2-fold serial dilutions in MH broth medium. The plates were incubated at 37°C and the MIC results registered after 16-18 h. The MIC was defined as the lowest concentration of compound for which no growth was observed. In order to assure that the EPI did not compromise the cellular viability, the concentrations used in the following work did not exceed 1/2 of the MIC. The MIC for tetracycline was also calculated in the presence of CPZ at 1/2 of the MIC.

The semi-automated fluorometric method

The method was carried out using the real-time thermocycler Rotor-Gene™ 3000 (Corbett Research, Sidney, Australia) to monitor the accumulation and extrusion of EtBr on a real-time basis [22,23]. The instrument allows the selection of the excitation and emission wavelengths that for EtBr are 530 nm band-pass and 585 nm high-pass filters, respectively. The fluorescence was acquired in cycles of 60 seconds, during the desired time interval, at the required temperature (37°C or 25°C). An explanatory diagram is provided in Figure Figure11.

Figure 1
Experimental flowchart of the semi-automated fluorometric method.

(i) Accumulation assay

The accumulation of EtBr was carried out as previously described [22]. Briefly, the E. coli strains were grown in 10 ml of LB medium until they reached a mid-log phase, which corresponded to an optical density at 600 nm (OD600) of 0.6. The bacteria were then centrifuged at 16,060 ×g for 3 minutes, the pellet washed twice with the same volume of PBS and the OD600 of the cellular suspension adjusted to 0.3. Glucose was added to the cellular suspension to a final concentration of 0.4% (v/v) and aliquots of 0.095 ml were transferred to 0.2 ml microtubes. EtBr was added in aliquots of 0.005 ml to obtain final concentrations that ranged from 1.0 to 6.0 μg/ml for E. coli K-12 AG100 and AG100TET and from 0.125 to 1.5 μg/ml for AG100A. The fluorescence was monitored in the Rotor-Gene™ 3000 at 37°C under the conditions described above. The effect of CPZ in the accumulation of EtBr was determined under conditions that optimize efflux (presence of glucose and incubation at 37°C). CPZ was used at concentrations that did not exceed 1/2 the MIC and the fluorescence was measured over a period of 60 minutes.

(ii) Efflux assay

The assessment of the efflux of EtBr was conducted as previously described [22]. Briefly, the E. coli strains were loaded with EtBr under conditions that favor accumulation (no glucose, 25°C and presence of CPZ). When the maximum level of EtBr accumulation was reached (approximately 60 minutes), the bacteria were centrifuged (16,060 ×g for 3 minutes) and the medium was replaced by: i) PBS without glucose; ii) PBS containing glucose; and iii) PBS without glucose and with CPZ (control of minimum efflux). Aliquots of 0.1 ml were transferred to 0.2 ml microtubes and the assay was performed at 37°C with continuous measurement of fluorescence as described above. The efflux of EtBr is presented in terms of relative fluorescence, which is obtained from the comparison between the fluorescence observed for the bacteria in the presence or absence of glucose and the control in which the cells are exposed to conditions of minimum efflux (i.e., absence of glucose and presence of CPZ). Each experiment was conducted in triplicate and the results obtained did not vary.

Model to quantify EtBr efflux in E. coli

(i) Quantification of intracellular EtBr concentration

In order to assess the amount of EtBr extruded from the cells, one has to quantify the amount retained inside the cells. First, a calibration curve is determined that correlates the initial fluorescence of the buffer containing EtBr (FLo) with the corresponding EtBr concentration (varying from 0 to 6 μg/ml): [EtBr]intial = 0.1201 × FL0 + 0.0373(R = 0.99). Then, for each concentration tested, an EtBr accumulation assay was performed, as described above. To quantify the intracellular EtBr concentration, at the end of the accumulation assay, 0.6 ml of each EtBr containing buffer were separated from the cells by centrifugation at 16,060 ×g for 10 minutes and the supernatant filtered with 0.22 μm syringe filters from Millipore Corporation (Bedford, USA). The fluorescence of the cell free buffer was measured in the Rotor-Gene™ 3000 (FL(PBS+EtBr)filt non corrected).

Since some EtBr is retained by the filter itself, a correction factor must be used to account for this difference. Thus, the corrected fluorescence of the filtered buffer corresponds to (FL(PBS+EtBr)filt corrected). = 1.2289 × (FL(PBS+EtBr)filt non corrected). + 0.7032 (R = 0.99). The difference between the initial fluorescence of the EtBr containing buffer (FLo) and (FL(PBS+EtBr)filt corrected gives the fluorescence corresponding to the intracellular EtBr concentration. However, the fluorescence data from the transport assays measured experimentally still contains a component from the EtBr that remains in solution. Thus, each value of the experimental accumulation curve can then be corrected by subtracting the background corresponding to the fluorescence of the initial EtBr concentration, originating FLint exp corr. By plotting the previously determined EtBr intracellular concentration for the final value of FLint exp corr, for each initial EtBr concentration tested, a new relation is achieved: [EtBr]int = 0.022 × FLint exp corr+ 0.06 (R = 0.99), which allows the conversion of the experimental fluorescence data over time into intracellular EtBr concentration over time. The correlations shown here were determined for the wild-type E. coli K-12 AG100. Similar relations were determined specifically for the other two strains used (AG100A and AG100TET).

(ii) Mathematical and statistical analyses

The model was fitted to the experimental values ([EtBr]int vs t) using the software Table Curve™ 2D from Jandel Scientific - AISN Software STATISTICA, which allowed the determination of the values of the parameters describing the influx and efflux rates, k+ and k-, respectively. Three independent assays were conducted and the results shown are the average ± standard deviation. P-value from the ANOVA statistical test was calculated.

(iii) Model validation

The predictive model proposed was validated by comparing the experimental data obtained using E. coli K-12 AG100, AG100A and AG100TET cell suspensions incubated in the presence of different concentrations of EtBr and the curves generated by the model, using the k+ and k- constants determined as described above.

Flow cytometry

This methodology was used to corroborate the analysis of the data obtained with the semi-automated fluorometric method. Therefore, the samples from the accumulation and efflux assays, used in the semi-automated fluorometric method, were also analyzed by flow cytometry, in order to compare the results obtained with these two methodologies. Data acquisition and analysis were performed using a FACSCalibur™ (BD Biosciences, San Jose, CA, USA). EtBr was excited at 488 nm and the fluorescence detected through a 585 nm filter (FL-2 channel).

(i) Accumulation assay

E. coli strains were cultured in 10 ml of LB medium at 37°C and 220 rpm until an OD600 of 0.6. Aliquots of 1.0 ml were centrifuged at 16,060 ×g for 3 minutes, the supernatant discarded and the pellet washed twice with PBS. The OD600 of the bacterial suspension was adjusted to 0.3 using PBS without glucose. EtBr was added at a final concentration of 1 μg/ml and CPZ was added to a final concentration of 20 μg/ml. Following incubation at 25°C for 60 minutes, aliquots of 0.5 ml were taken for fluorescence measurement in the flow cytometer FACSCalibur™. Data was collected for at least 10,000 events per sample.

(ii) Efflux assay

After loading the bacteria with EtBr (1 μg/ml) in the presence of CPZ (20 μg/ml), the bacterial suspension was centrifuged at 16,060 ×g for 3 minutes. The supernatant was removed and the pellet resuspended in EtBr-free PBS, adjusting the OD600 to 0.3. Efflux was assessed in the presence and absence of glucose at 0.4% (v/v). Aliquots of 0.5 ml were taken after 2.5, 5, 15, 30 and 60 minutes after incubation at 37°C, for fluorescence measurement in the flow cytometer FACSCalibur™. Analyses were performed with an acquisition of at least 10,000 events per sample.

Results and Discussion

Detecting EtBr efflux mediated by E. coli efflux pump systems

Experiments were carried out with EtBr concentrations that did not affect in any way the cell viability, i.e., that did not exceed 1/2 the MIC for EtBr (Table (Table1).1). In this case and as previously demonstrated, accumulation of EtBr and its extrusion from E. coli are the result of the balance between EtBr entry by passive diffusion (influx) and the extrusion activity of efflux pump systems, primarily the AcrAB-TolC [11,13]. As shown by Figure Figure2,2, the accumulation of EtBr under conditions that are considered to maximize efflux, i.e., presence of glucose and 37°C, begins to take place at a concentration of EtBr that exceeds 1.0 μg/ml for the wild-type E. coli K-12 AG100 (Figure (Figure2A),2A), 0.250 μg/ml for the AG100A (acrAB inactivated; Figure Figure2B),2B), and 1.0 μg/ml for the AG100TET(acrAB and other efflux pump genes over-expressed; Figure Figure2C).2C). As expected, the strain that over-express efflux systems (AG100TET) accumulates the least amount of EtBr even when the maximum concentration of EtBr to which it is exposed is 6 μg/ml. On the contrary, the AG100A, whose AcrAB efflux pump has been inactivated, accumulates approximately 25 times more EtBr when exposed to a far lower concentration of 1.5 μg/ml of EtBr. The importance of the AcrAB-TolC efflux system is further illustrated by the comparison of accumulation of EtBr by the wild-type AG100 to that by the AG100A, when both strains are exposed to 1 μg/ml of EtBr.

Table 1
MIC values of EtBr and several antibiotics for E. coli AG100, AG100A and AG100TET.
Figure 2
Accumulation of EtBr at increasing concentrations by E. coli K-12 AG100 (A), AG100A (B) and AG100TET (C). The bacteria were exposed to increasing concentrations of EtBr at 37°C in the presence of glucose. Note: assays for AG100A were carried out ...

Accumulation of EtBr inside the bacterial cells can be increased in the presence of an EPI such as phenothiazines (e.g. CPZ), compounds that have been shown to inhibit efflux activity of Gram-negative bacteria [4,5,22]. Thus, these compounds are usually employed for the demonstration of over-expressed efflux pumps of bacteria [5,19,22,23]. Because of the real-time capacity and sensitivity of the semi-automated fluorometric method, the demonstration of the effects of an EPI, such as CPZ, on the intrinsic efflux system of the wild-type E. coli K-12 AG100 is readily made. As shown by Figure Figure3A3A (A1 and A2), high concentrations of CPZ maximize the amount of EtBr accumulated only when glucose is absent from the medium. Similar results were obtained for the strains AG100TET and AG100A (data not shown). The effect of CPZ on the accumulation of EtBr by wild-type E. coli K-12 AG100 is similarly demonstrated and confirmed with the aid of flow cytometry (Figure (Figure3B3B).

Figure 3
Effect of chlorpromazine (CPZ) on EtBr accumulation by E. coli K-12 AG100. The bacteria were loaded with EtBr at 1 μg/ml in the presence of increasing concentrations of CPZ for a period of 60 minutes at 37°C in the presence and absence ...

The on-line visualization of efflux activity by the EtBr loaded cells requires that accumulation of EtBr has previously taken place. Therefore, before performing the efflux assays, bacteria are exposed to conditions that promote significant accumulation of EtBr [22,23]. To this extent, we have chosen a temperature of 25°C, absence of glucose and presence of CPZ (20 μg/ml), to promote maximum accumulation, within 60 minutes. When maximum accumulation has taken place under these conditions, the bacteria are washed free of EtBr and CPZ, and resuspended in fresh buffer with and without glucose. Fluorescence readings were conducted over a period of 15 minutes at 37°C. As shown by Figure Figure4,4, restoration of optimum conditions of glucose, noted to prevent accumulation, are required for the extrusion of EtBr. This assay shows that E. coli cells need an energy source for efflux to take place.

Figure 4
Detection of EtBr efflux in E. coli K-12 AG100. The bacteria were loaded with EtBr at 1 μg/ml in the presence of CPZ (20 μg/ml) for a period of 60 minutes at 25°C. After replacing the buffer with EtBr-free PBS with or without glucose, ...

Therefore, this methodological approach proved its usefulness for the demonstration of active efflux of EtBr in E. coli and the strategy developed allowed to differentiate influx (passive diffusion into the cell) from efflux activity (active efflux through pumps).

Modeling EtBr transport across E. coli cell wall

In order to quantify the efflux activity, a mechanistic experimental model that establishes a balance related to the intracellular EtBr concentration was developed, as described below:

equation image
(1.1)

where [EtBr]int is the intracellular EtBr concentration (μg/ml); [EtBr]ext is the external EtBr concentration (μg/ml); k+ is the rate of EtBr entry into the cells (min-1) and k- corresponds to the rate of EtBr efflux from the cells (min-1). Therefore,

equation image
(1.2)

where [EtBr]Tot is the total EtBr concentration (μg/ml). Replacing equation (1.2) in equation (1.1) and solving it for [EtBr]int, it is possible to obtain the following equation, which describes the EtBr transport across the cell wall of E. coli:

equation image
(1.3)

The equation developed herein (eq. 1.3) allied to the technical approach used to quantify the intracellular EtBr concentration (Methods) allowed us to quantify the degree of EtBr efflux activity in the three E. coli strains (AG100, AG100A and AG100TET). This strategy is based on the distinct levels of EtBr fluorescence in solution and inside the cells. EtBr emits fluorescence when it is free in solution (in this case, PBS) in a concentration dependent manner, accurately captured by the photomultiplier detector with the 585 nm high-pass filter of the Rotor-Gene™ 3000 that differentiates μg/ml differences [22,24]. The high sensitivity of this detector ensue the definition of a calibration curve, which correlates fluorescence (FL0) and the initial EtBr concentration in solution, before the cells are added to the medium, varying from 0 μg/ml to 6 μg/ml [24]:

equation image

where [EtBr]initial = [EtBr]Total. When the E. coli cells are exposed to EtBr containing buffer (1 to 6 μg/ml for AG100 and AG100TET; 0.125 to 1.5 μg/ml for AG100A), the cells start to accumulate EtBr that enters by passive diffusion, with the efflux pump systems trying to balance this entry according to the kinetics presented in Figure Figure2.2. At these low concentrations, EtBr does not reach the cellular components in the cytoplasm to which it could bind irreversibly, being effluxed from the cytoplasm and periplasm by either single- or multi-component efflux systems [26,27]. When the concentration of EtBr within the periplasmic space exceeds significantly its extrusion, EtBr is translocated beyond the inner plasma membrane where the medial sites of the cell contain nucleic acids to which the EtBr can intercalate almost irreversibly, after which extrusion is not possible [16,17,26,27].

Using the rationale described in Methods, it is possible to correlate the fluorescence readings by the semi-automated fluorometric method in bulk cells to the EtBr concentration that remains inside the cells; [EtBr]int = 0.022 × FLint exp corr + 0.06 (R = 0.99). With the assistance of the software Table Curve™ 2D from Jandel Scientific - AISN Software STATISTICA, it is then possible to adjust the model (eq. 1.3.) to the experimental data and determine the values of the constants k+ and k-, which represent a measure of the rate of entry and the rate of efflux of EtBr into and out of the cell, respectively (Figure (Figure5).5). Table Table22 summarizes the values of k+ and k- obtained for the three strains tested. The values obtained show similar influx rates for the three E. coli strains studied, as expected, since this parameter reflects the entry of EtBr by passive diffusion. Both the passive influx absolute values and their variation among the three strains are negligible when compared to the values obtained for the efflux rates.

Table 2
Influx (k+) and efflux (k-) rates for E. coli K-12 AG100, AG100A and AG100TET.
Figure 5
Influx (k+) and efflux (k-) rates of EtBr in the E. coli strains tested. The values shown represent averages of three independent experiments and respective standard deviations for the three E. coli strains tested: AG100, AG100A and AG100TET.

The model proposed accurately describes the behavior of the three strains, showing a lower efflux rate for the AG100A strain when compared to the wild-type AG100 (P value = 0.0023), as a result of the inactivation of the AcrAB-TolC system in the mutant strain. For the AG100TET strain the model revealed a significantly increased efflux rate compared to the wild-type strain (P value = 0.0057). This result reflects the higher efflux activity in this tetracycline adapted strain due to the over-expression of efflux pumps, particularly of the AcrAB-TolC system [11,13].

Moreover, the results provided by the model, in terms of EtBr efflux rates, correlate with the MIC for EtBr for each of the strains studied (Table (Table1).1). While the wild-type strain, E. coli AG100 (MICEtBr = 150 μg/ml), showed a EtBr efflux rate of

equation image

= 0.0173 ± 0.0057 min-1, the AcrAB deleted strain, E. coli AG100A (MICEtBr = 5 μg/ml), had the lowest EtBr efflux rate

equation image

= 0.0106 ± 0.0033 min-1. Conversely, the tetracycline induced strain, E. coli AG100TET, over-expressing the AcrAB system, shows a much higher efflux rate

equation image

= 0.0230 ± 0.0075 min-1, which corresponds to an MIC for EtBr of 300 μg/ml. MICs of each strain towards several antibiotics known to be efflux pump substrates also showed a correlation between efflux activity and resistance level to these drugs (Table (Table1).1). The determination of the MICs for tetracycline in the presence of the EPI CPZ reinforced the role played by efflux on such resistance, as the MICs values decreased in the presence of sub-inhibitory concentrations of this EPI, according to the efflux activity previously determined for each strain (Table (Table11).

This approach allowed us, for the first time in the literature, to calculate the values of EtBr influx/efflux rates (k+ and k-) for E. coli and to construct a predictive model for the accumulation curve of this molecule at any concentration by a given E. coli strain, provided that EtBr concentration does not affect the cellular viability. An example of such calculation is provided in Figure Figure6,6, for three different concentrations of EtBr for the E. coli strains used. When these predictive curves are compared to the experimental data a close fit is obtained (Figure (Figure6),6), thus validating the proposed model.

Figure 6
Examples of model fitting to experimental data. The figures represent the fitting of the model to the experimental data for the time course of intracellular EtBr concentration in E. coli strains AG100, AG100A and AG100TET, incubated in the presence of ...

Conclusion

In this work we have applied the technical advantages of the semi-automated fluorometric method [22] for the development and application of an experimental model to describe and quantify the efflux pump activity in E. coli. The semi-automated fluorometric method affords the in vivo and on-line evaluation of the efflux pump activity by real-time fluorometry using the Rotor-Gene™ 3000, and represents an innovative technique when compared to other technologies [23]. Based upon the differences of fluorescence that reflect differences on the EtBr concentrations outside and inside the cells, the technique provides a powerful tool for the real-time monitoring of efflux kinetics in bacterial cells. Moreover, it has potential for the identification of new efflux pump substrates, as well as new bacterial EPIs [23]. A more fundamental application is the extension of this methodology to understand the transport kinetics of EtBr or other fluorescent substrates in bacterial cells.

We used such approach to differentiate and quantify EtBr transport in E. coli, and an experimental model was developed which parameterizes passive entry (influx) and active efflux of EtBr. The methodology developed allowed to detect differences in the EtBr efflux activity among strains that differ in their efflux pump expression, highlighting the importance of these systems in the extrusion from the cell of toxic compounds such as EtBr [6,7,10].

Although the experimental model presented was designed based upon a set of three canonic, isogenic strains, as a way to assess the method's sensitivity to differentiate their singular efflux activities, it can be applied to other E. coli strains or bacteria, since it is based on the overall transport of EtBr across the bacterial cell wall, which is common among bacteria [2,7,16,22,23]. It should be stressed however that it allows measuring the overall efflux activity rather than efflux related to a specific pump. For evaluation of the role played by a pump, a mutant specific for that pump must be used. The determination of influx and efflux rates for each of the strains to be analyzed opens new insights and opportunities for exploration of cell wall permeability, as well as for the control of the efflux activity in bacterial cells, representing a quantitative method to determine efflux activity. This approach may be used to elaborate a standardized data base for different reference strains relative to efflux activity (efflux rates), providing the means by which one can evaluate the resistance due to efflux pump activity in standardized conditions between laboratories. It represents a particularly suitable procedure for the assessment of efflux pump activity in MDR clinical isolates and screening for potential inhibitors of such activity. Such approaches may contribute to a better understanding of the bacterial efflux systems as a resistance mechanism and to design new therapeutic strategies against MDR bacterial infections [28].

Competing interests

The authors declare that they have no competing interests.

Authors' contributions

LP and LR carried out the experimental work related to accumulation and efflux assays and MIC determination. LP and IC participated in the development of the model and LR assisted in the flow cytometry experiments. LP, LR and IC assisted in the preparation of the manuscript. MM carried out the flow cytometry experiments. PF and CCCRC participated in the development and validation of the experimental model and assisted in the preparation of the manuscript. GAM and LA assisted in the design of the study. LA assisted in the preparation of the manuscript. FS assisted in the design and performance of the flow cytometry experiments. MV conceived the study, its design and coordination and prepared the draft of the manuscript.

All authors read and approved the final manuscript.

Acknowledgements

This work was supported by grants EU-FSE/FEDER-POCI/SAU-MMO/59370/2004, EU-FSE/FEDER-PTDC/BIA-MIC/71280/2006 and PTDC/BIA-MIC/105509/2008 provided by Fundação para a Ciência e a Tecnologia (FCT) of Portugal. M. Martins and L. Rodrigues were supported by grants SFRH/BD/14319/2003 and SFRH/BD/24931/2005 (FCT, Portugal), respectively. C.C.C.R. de Carvalho and P. Fernandes acknowledge FCT for contract under Programme Ciência 2007.

References

  • Li XZ, Nikaido H. Efflux-mediated drug resistance in bacteria. Drugs. 2004;64:159–204. doi: 10.2165/00003495-200464020-00004. [PubMed] [Cross Ref]
  • Piddock LJ. Multidrug-resistance efflux pumps - not just for resistance. Nat Rev Microbiol. 2006;4:629–636. doi: 10.1038/nrmicro1464. [PubMed] [Cross Ref]
  • Levy SB, McMurry L. Plasmid-determined tetracycline resistance involves new transport systems for tetracycline. Nature. 1978;276:90–92. doi: 10.1038/276090a0. [PubMed] [Cross Ref]
  • Bambeke FV, Pagès JM, Lee VJ. Inhibitors of bacterial efflux pumps as adjuvants in antibiotic treatments and diagnostic tools for detection of resistance by efflux. Recent Patents Anti-Infect Drug Disc. 2006;1:157–175. doi: 10.2174/157489106777452692. [PubMed] [Cross Ref]
  • Pagès JM, Masi M, Barbe J. Inhibitors of efflux pumps in Gram-negative bacteria. Trends Mol Med. 2005;11:382–389. doi: 10.1016/j.molmed.2005.06.006. [PubMed] [Cross Ref]
  • Lomovskaya O, Zgurskaya HI, Totrov M, Watkins WJ. Waltzing transporters and 'the dance macabre' between humans and bacteria. Nat Rev Drug Discov. 2007;6:56–65. doi: 10.1038/nrd2200. [PubMed] [Cross Ref]
  • Poole K. Efflux pumps as antimicrobial resistance mechanisms. Ann Med. 2007;39:162–176. doi: 10.1080/07853890701195262. [PubMed] [Cross Ref]
  • Piddock LJ. Clinically relevant chromosomally encoded multidrug resistance efflux pumps in bacteria. Clin Microbiol Rev. 2006;19:382–402. doi: 10.1128/CMR.19.2.382-402.2006. [PMC free article] [PubMed] [Cross Ref]
  • Davin-Regli A, Pagès JM. Regulation of efflux pumps in Enterobacteriaceae: genetic and chemical effectors. In: Amabile-Cuevas CF, editor. Antimicrobial resistance in bacteria. Norfolk, UK: Horizon Bioscience; 2007. pp. 55–75.
  • Okuso H, Ma D, Nikaido H. AcrAB efflux pump plays a major role in the antibiotic resistance phenotype of Escherichia coli multiple-antibiotic-resistance (Mar) mutants. J Bacteriol. 1996;178:306–308. [PMC free article] [PubMed]
  • Viveiros M, Dupont M, Rodrigues L, Couto I, Davin-Regli A, Pagès JM, Amaral L. Antibiotic Stress, Genetic Response and Altered Permeability of E. coli. PLoS ONE. 2007;2:e365. doi: 10.1371/journal.pone.0000365. [PMC free article] [PubMed] [Cross Ref]
  • Pietras ZV, Bavro N, Furnham N, Pellegrini-Calace M, Milner-White EJ, Luisi BF. Structure and mechanism of drug efflux machinery in Gram negative bacteria. Curr Drug Targets. 2008;9:719–728. doi: 10.2174/138945008785747743. [PubMed] [Cross Ref]
  • Viveiros M, Jesus A, Brito M, Leandro C, Martins M, Ordway D, Molnar M, Molnar J, Amaral L. Inducement and reversal of tetracycline resistance in Escherichia coli K-12 and expression of proton gradient-dependent multidrug efflux pump genes. Antimicrob Agents Chemother. 2005;49:3578–3582. doi: 10.1128/AAC.49.8.3578-3582.2005. [PMC free article] [PubMed] [Cross Ref]
  • Davin-Regli A, Bolla JM, James CE, Lavigne JP, Chevalier J, Garnotel E, Molitor A, Pagès JM. Membrane permeability and regulation of drug "influx and efflux" in enterobacterial pathogens. Curr Drug Targets. 2008;9:750–759. doi: 10.2174/138945008785747824. [PubMed] [Cross Ref]
  • Greulich KO. Single molecule techniques for biomedicine and pharmacology. Curr Pharm Biotechnol. 2004;5:243–259. doi: 10.2174/1389201043376878. [PubMed] [Cross Ref]
  • Jernaes MW, Steen HB. Staining of Escherichia coli for flow cytometry: influx and efflux of ethidium bromide. Cytometry. 1994;17:302–309. doi: 10.1002/cyto.990170405. [PubMed] [Cross Ref]
  • Joux F, Lebaron P. Use of fluorescent probes to assess physiological functions of bacteria at single-cell level. Microbes Infect. 2000;2:1523–1535. doi: 10.1016/S1286-4579(00)01307-1. [PubMed] [Cross Ref]
  • Kyriacou SV, Brownlow WJ, Xu XHN. Using nanopartical optics assay for direct observation of the function of antimicrobial agents in single live bacterial cells. Biochemistry. 2004;43:140–147. doi: 10.1021/bi0351110. [PubMed] [Cross Ref]
  • Lomovskaya O, Bostian KA. Practical applications and feasibility of efflux pump inhibitors in the clinic - a vision for applied use. Biochem Pharmacol. 2006;71:910–918. doi: 10.1016/j.bcp.2005.12.008. [PubMed] [Cross Ref]
  • Martins M, Santos B, Martins A, Viveiros M, Couto I, Cruz A, Pagès JM, Molnar J, Fanning S, Amaral L, Management Committee Members of Cost B16 European Commission/European Science Foundation An instrument-free method for the demonstration of efflux pump activity of bacteria. In vivo. 2006;20:657–664. [PubMed]
  • Mortimer PG, Piddock LJ. A comparison of methods used for measuring the accumulation of quinolones by Enterobacteriaceae, Pseudomonas aeruginosa and Staphylococcus aureus. J Antimicrob Chemother. 1991;28:639–653. doi: 10.1093/jac/28.5.639. [PubMed] [Cross Ref]
  • Viveiros M, Martins A, Paixão L, Rodrigues L, Martins M, Couto I, Fähnrich E, Kern WV, Amaral L. Demonstration of intrinsic efflux activity of Escherichia coli K-12 AG100 by an automated ethidium bromide method. Int J Antimicrob Agents. 2008;31:458–462. doi: 10.1016/j.ijantimicag.2007.12.015. [PubMed] [Cross Ref]
  • Viveiros M, Martins M, Couto I, Rodrigues L, Spengler G, Martins A, Kristiansen JE, Molnar J, Amaral L. New methods for the identification of efflux mediated MDR bacteria, genetic assessment of regulators and efflux pump constituents, characterization of efflux systems and screening for inhibitors of efflux pumps. Curr Drug Targets. 2008;9:760–778. doi: 10.2174/138945008785747734. [PubMed] [Cross Ref]
  • Corbett Research . Rotor-Gene 3000 Real-Time Amplification Operator's Manual Version 46. Corbett Research, Sydney, Australia; 2003.
  • Clinical and Laboratory Standards Institute . Performance Standards for Antimicrobial Susceptibility Testing: Fifteenth Informational Supplement M100-S15. CLSI, Wayne, PA, USA; 2005.
  • Lee A, Mao W, Warren MS, Mistry A, Hoshino K, Okumura R, Ishida H, Lomovskaya O. Interplay between efflux pumps may provide either additive or multiplicative effects on drug resistance. J Bacteriol. 2000;182:3142–3150. doi: 10.1128/JB.182.11.3142-3150.2000. [PMC free article] [PubMed] [Cross Ref]
  • Seeger MA, Diederichs K, Eicher T, Brandstätter L, Schiefner A, Verrey F, Pos KM. The AcrB efflux pump: conformational cycling and peristalsis lead to multidrug resistance. Curr Drug Targets. 2008;9:729–749. doi: 10.2174/138945008785747789. [PubMed] [Cross Ref]
  • Martins M, Dastidar SG, Fanning S, Kristiansen JE, Molnar J, Pagès JM, Schelz Z, Spengler G, Viveiros M, Amaral L. Potential role of non-antibiotics (helper compounds) in the treatment of multidrug-resistant Gram-negative infections: mechanisms for their direct and indirect activities. Int J Antimicrob Agents. 2008;31:198–208. doi: 10.1016/j.ijantimicag.2007.10.025. [PubMed] [Cross Ref]

Articles from Journal of Biological Engineering are provided here courtesy of BioMed Central
PubReader format: click here to try

Formats:

Related citations in PubMed

See reviews...See all...

Cited by other articles in PMC

See all...

Links

Recent Activity

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

See more...