Logo of amolbioBioMed CentralBiomed Central Web Sitesearchsubmit a manuscriptregisterthis articleAlgorithms for Molecular Biology : AMB
Algorithms Mol Biol. 2009; 4: 7.
Published online Apr 22, 2009. doi:  10.1186/1748-7188-4-7
PMCID: PMC2679019

Ranking differentially expressed genes from Affymetrix gene expression data: methods with reproducibility, sensitivity, and specificity

Abstract

Background

To identify differentially expressed genes (DEGs) from microarray data, users of the Affymetrix GeneChip system need to select both a preprocessing algorithm to obtain expression-level measurements and a way of ranking genes to obtain the most plausible candidates. We recently recommended suitable combinations of a preprocessing algorithm and gene ranking method that can be used to identify DEGs with a higher level of sensitivity and specificity. However, in addition to these recommendations, researchers also want to know which combinations enhance reproducibility.

Results

We compared eight conventional methods for ranking genes: weighted average difference (WAD), average difference (AD), fold change (FC), rank products (RP), moderated t statistic (modT), significance analysis of microarrays (samT), shrinkage t statistic (shrinkT), and intensity-based moderated t statistic (ibmT) with six preprocessing algorithms (PLIER, VSN, FARMS, multi-mgMOS (mmgMOS), MBEI, and GCRMA). A total of 36 real experimental datasets was evaluated on the basis of the area under the receiver operating characteristic curve (AUC) as a measure for both sensitivity and specificity. We found that the RP method performed well for VSN-, FARMS-, MBEI-, and GCRMA-preprocessed data, and the WAD method performed well for mmgMOS-preprocessed data. Our analysis of the MicroArray Quality Control (MAQC) project's datasets showed that the FC-based gene ranking methods (WAD, AD, FC, and RP) had a higher level of reproducibility: The percentages of overlapping genes (POGs) across different sites for the FC-based methods were higher overall than those for the t-statistic-based methods (modT, samT, shrinkT, and ibmT). In particular, POG values for WAD were the highest overall among the FC-based methods irrespective of the choice of preprocessing algorithm.

Conclusion

Our results demonstrate that to increase sensitivity, specificity, and reproducibility in microarray analyses, we need to select suitable combinations of preprocessing algorithms and gene ranking methods. We recommend the use of FC-based methods, in particular RP or WAD.

Background

Microarray analysis is often used to detect differentially expressed genes (DEGs) under different conditions. As there are considerable differences [1,2] in how well it performs, choosing the best method of ranking these genes is important. Furthermore, Affymetrix GeneChip users need to choose a preprocessing algorithm from a number of competitors in order to obtain expression-level measurements [3].

We recently reported with another group that there are suitable combinations of preprocessing algorithms and gene ranking methods [1,2]. We evaluated three preprocessing algorithms, MAS [4], RMA [5], and DFW [6], and eight gene ranking methods, WAD [1], AD, FC, RP [7], modT [8], samT [9], shrinkT [10], and ibmT [11], by using a total of 38 datasets (including 36 real experimental datasets) [1]. Meanwhile, Pearson [2] evaluated nine preprocessing algorithms, MAS [4], RMA [5], DFW [6], MBEI [12], CP [13], PLIER[14], GCRMA [15], mmgMOS [16], and FARMS [17], and five gene ranking methods, modT [8], FC, a standard t-test, cyberT [18], and PPLR [19], by using only one artificial 'spike-in' dataset, the Golden Spike dataset [13].

When we re-evaluated the two reports using the common algorithms and methods we found that suitable gene ranking methods for each of the three preprocessing algorithms, i.e., MAS, RMA, and DFW, converge to the same: Combinations of MAS and modT (MAS/modT), RMA/FC, and DFW/FC can thus be recommended. However, the final conclusions for the original reports are understandably different: Our recommendations [1] are MAS/WAD, RMA/FC, and DFW/RP, while Pearson [2] recommends mmgMOS/PPLR, GCRMA/FC, and so on. This difference is mainly because fewer preprocessing algorithms were evaluated in our previous study [1].

We investigated suitable gene ranking methods for each of six preprocessing algorithms: MBEI, VSN [20], PLIER, GCRMA, FARMS, and mmgMOS. We also investigated the best combination of a preprocessing algorithm and gene ranking method using another evaluation metric, i.e., the percentage of overlapping genes (POG), proposed by the MAQC study [21].

Most authors of methodological papers have made claims that their methods have a greater area under the receiver operating characteristic curve (AUC) values, i.e., both high sensitivity and specificity [1,2]. However, reproducibility is rarely mentioned [21]. A good method should produce high POG values, i.e., those indicating reproducibility as well as high AUC ones, i.e., those for sensitivity and specificity. We will discuss suitable combinations of preprocessing algorithms and gene ranking methods.

Results and discussion

Evaluation based on AUC metric

Our reason for using this evaluation was to investigate suitable gene ranking methods for each preprocessing algorithm. Six algorithms were investigated: Three that have sometimes been used (Table (Table1),1), MBEI (PM only model) [12], GCRMA [15], and VSN [20], one that was used by the MAQC study [21], PLIER [14], one that was the best method in a benchmark study [22] at the time of writing, FARMS [17], and one recommended by Pearson [2,23], mmgMOS [16].

Table 1
Frequency of preprocessing algorithms used during 2003 – 2008

The AUC enables comparison based on sensitivity and specificity simultaneously because the ROC curve is created by plotting the true positive (TP) rate (sensitivity) against the false positive (FP) rate (1 minus the specificity) obtained at each possible threshold value [1]. A good method should produce high AUC values for real experimental datasets [1]. We evaluated 36 real experimental datasets, each of which has some true DEGs confirmed by a real-time polymerase chain reaction, RT-PCR. They correspond to "Datasets 3–38" in our previous study (for details, see reference [1]). The 36 experimental datasets can be divided into two groups: One group (Datasets 3–26) had originally been analyzed using MAS-preprocessed data and the other (Datasets 27–38) with RMA-preprocessed data. We will use these serial numbers, i.e., Datasets 3–38, for the 36 datasets. We do not use the first two artificial spike-in datasets (Datasets 1 and 2) here. This is because the results for the real experimental datasets should take precedence over those for the artificial ones [1].

The average AUC values for PLIER-, VSN-, FARMS-, mmgMOS-, MBEI-, and GCRMA-preprocessed data for the two groups, Datasets 3–26 and Datasets 27–38, are shown in Table Table2.2. The values for each dataset are given in the additional file [see Additional file 1]. To make this work comparable with our previous results for MAS-, RMA-, and DFW-preprocessed data (table four in [1]), the average AUC values are also provided. The values for the mmgMOS- and VSN-preprocessed data for the first and second groups were the best overall among the six preprocessing algorithms respectively. The high AUC values for the mmgMOS-preprocessed data for the first group can be explained by the similarity between the mmgMOS- and MAS-preprocessed data (Figure (Figure11 in [3]). The high values for the VSN- and GCRMA-preprocessed data for the second group are also reasonable because these algorithms are quite similar to RMA, which was used in the original papers for the second group (Datasets 27–38). There is thus no convincing rationale for choosing among different preprocessing algorithms with the results from the 36 real experimental datasets that were first analyzed using only MAS- or RMA-preprocessed data. Therefore, we will now discuss suitable gene ranking methods for each preprocessing algorithm.

Figure 1
POG values for FARMS-preprocessed data. (a) Sample A vs. Sample B; (b) Sample C vs. Sample D. Number of DEGs is shown on x-axis and L is the number of DEGs from the up-regulation in one sample (Sample A or C) or other sample (Sample B or D) [21]. Percentage ...
Table 2
Average AUC values for Datasets 3–26 and 27–38

The best gene ranking methods for the four (PLIER, FARMS, mmgMOS, and MBEI) of the six preprocessing algorithms were the same for both groups: PLIER/RP, FARMS/RP, mmgMOS/WAD, and MBEI/RP showed the highest average AUC values (Table (Table2).2). For VSN- and GCRMA-preprocessed data, AD and RP were the best for the first and second groups respectively. In practice, both gene ranking methods for the two preprocessing algorithms can be selected because the average AUC values for VSN/RP and GCRMA/RP for the first group and the values for VSN/AD and GCRMA/AD for the second group are close to those for the corresponding best combinations.

A recent study [2] reported that the use of the probability of positive log ratio (PPLR) method [19] combined with mmgMOS was the best when another spike-in dataset was evaluated using AUC. We evaluated the performance of the PPLR method combined with only the mmgMOS-preprocessed data because the gene ranking method was originally designed for the mmgMOS-preprocessed data and because the method may take a long time to run. The average AUC values for mmgMOS/PPLR were high (93.34 for the first and 90.06 for the second) but not the best ones. Of course, there might be the other good preprocessing algorithms with good affinity with PPLR and evaluating them will be our next task.

It should be noted that the average AUC values listed in Table Table22 were obtained using data in which log signals under 0 were set to 0 though two preprocessing algorithms (PLIER and mmgMOS) are designed to output both positive and negative log signals. We observed that the best average AUC values for PLIER- and mmgMOS-preprocessed data with no floor value setting for the two groups, Datasets 3–26 and Datasets 27–38, were lower than those corresponding values obtained from log signal data with the floor value setting (data not shown). This result suggests that using a floor value setting can increase the sensitivity and specificity with which DEGs are detected.

Evaluation based on POG metric

The authors of the MAQC study have developed a large number of reference datasets to address the reproducibility of microarray results [21]. In the study for Affymetrix GeneChip data, the MAQC study compared five gene ranking methods: AD, samT, a simple t-statistic, the Wilcox rank-sum test, and random, and they concluded that a FC-based method (AD) showed the most reproducible result when intra-platform reproducibilities for DEGs, i.e., the percentage of overlapping genes (POG), among test sites were evaluated. However, the evaluation was performed only for the PLIER-preprocessed data: The conclusion of the MAQC project is not necessarily universal when the other preprocessing algorithms are employed. Therefore, researchers would like to compare many gene ranking methods with other preprocessing algorithms using POG as an evaluation metric.

The authors of the above study used two RNA sample types and two mixtures of the original samples: Sample A, a universal human reference RNA; Sample B, a human brain reference RNA; Sample C, which consisted of 75 and 25% of sample A and B respectively; and Sample D, which consisted of 25 and 75% of sample A and B respectively. At each of the test sites, five replicate assays for each of the four sample types were performed. Since the Affymetrix GeneChip data were generated at six test sites, the evaluation was performed using the POG values among six test sites.

The POG values for the 100 top-ranked genes among six test sites are shown in Table Table3.3. Recall that the MAQC study reports that a FC-based gene ranking (AD) generates more reproducible results compared to those gained from a t-statistic-based gene ranking such as samT [9] when the POG metric is used [21]. Although the first study was performed only for the PLIER-preprocessed data, this tendency was universally observed for the other preprocessed data: FC-based methods are superior to t-statistic-based methods if the POG is evaluated.

Table 3
POG values for the 100 top-ranked genes among six test sites

The best combination was FARMS/WAD. When compared to the MAQC's recommendation, the WAD was clearly superior to the AD method. This is because WAD consists of AD statistics and a weight term w [1] and the gene ranking based on the w statistic is much more reproducible than the one based on the AD statistic. The reality for w is relative average signal intensity on log-scale so that highly expressed genes are highly ranked on the average for the different conditions [1,24]. A representative example of the reproducibility for the w term in WAD is shown in Figure Figure1.1. The POG values among six test sites for the w statistic (blue line) are clearly higher than those for the AD statistic (black line). We confirmed this tendency for all gene expression data preprocessed using a total of nine algorithms listed in Table Table33 (see Additional file 2).

If we follow only the MAQC's evaluation metric, the most reproducible gene ranking method should be the w statistic (not the WAD one). However, the w statistic merely indicates relative average signal intensity [1] and this statistic is clearly inferior to that obtained from the other specialized gene ranking methods such as WAD when AUC value (both sensitivity and specificity) is evaluated (see Additional file 1).

Choice of best gene ranking methods with both high AUC and high POG values

Note that the authors of the MAQC study recommend the use of both the AD and a t-statistic-based method with a non-stringent p threshold. This is despite the fact that only using the AD method can increase the reproducibility [21]. The reason for this recommendation was found in a recent study [25] that explained how using t-statistic-based methods allowed specificity and sensitivity to be controlled.

Our current and previous [1] results are clearly different from that of MAQC's recommendation. Our recommendation is that FC-based methods should be used for increasing both the POG values i.e., reproducibility and the AUC values i.e., sensitivity and specificity. Specifically, the recommendations can be narrowed to RP or WAD. When the RP method is combined with several preprocessing algorithms, PLIER, VSN, FARMS, MBEI, and GCRMA, the AUC value is enhanced. However, as shown in Tables Tables22 and and3,3, when WAD is combined with mmgMOS this enhances the AUC values and when WAD with all preprocessing algorithms is interrogated overall it enhances the POG values.

The difference between the recommendations of the MAQC study and of ours is mainly because the two methods we recommended, RP and WAD, are not included in the MAQC study. This is understandable because there are many other strategies, such as those described in [26-28], that we did not analyze here. This implies the use of RP or WAD may not be the best; however, we maintain that our recommendations are a better choice compared to that of the MAQC study [21,25]. Since new preprocessing algorithms and gene ranking methods continue to be developed [29-31], the search for the best combination for identifying the true DEGs is ongoing.

Conclusion

We evaluated the performance of combinations between six preprocessing algorithms and eight gene ranking methods in terms of the AUC value, i.e., both sensitivity and specificity, and the POG one, i.e., reproducibility. Our comprehensive evaluation confirmed the importance of using suitable combinations of preprocessing algorithms and gene ranking methods.

Overall, two FC-based gene ranking methods (RP and WAD) can be recommended. Our current and previous results indicate that any of the following combinations, RMA/RP, DFW/RP, PLIER/RP, VSN/RP, FARMS/RP, MBEI/RP, GCRMA/RP, MAS/WAD, and mmgMOS/WAD, enhances both sensitivity and specificity, and also that using the WAD method enhances reproducibility.

Methods

The raw data (Affymetrix CEL files) for Datasets 3–38 were obtained from the Gene Expression Omnibus (GEO) website [32]. All analysis was performed using R (ver. 2.7.2) [33] and Bioconductor [34]. The versions of R libraries used in this study are as follows: plier (ver. 1.10.0), vsn (3.2.1), farms (1.3), puma (1.6.0), affy (1.16.0) [35], gcrma (2.10.0), RankProd (2.12.0) [36], st (1.0.3) [10], limma (2.14.7) [8], ROC (1.14.0). The main functions in the R libraries are as follows: justPlier for PLIER, vsnrma for VSN, q.farms for FARMS, mmgmos for mmgMOS, expresso for MBEI (PM only model), gcrma for GCRMA, mas5 for MAS, rma for RMA, expresso and the R codes available in [37] for DFW, RP for RP, modt.stat for modT, sam.stat for samT, shrinkt.stat for shrinkT, IBMT for ibmT [38], and pumaComb and pumaDE for PPLR [19].

Since the MBEI and MAS expression measures do not output logged values, signal intensities under 1 in those preprocessed data were set to 1 so that the logarithm of the data could be found. Logged values smaller than 0 in PLIER-, VSN-, FARMS-, mmgMOS-, and GCRMA-preprocessed data were set to 0. For reproducible research, we made the R code for analyzing Dataset 4 (GEO ID: GSM189708–189713) available as the additional file [see Additional file 3]. The R codes for the other datasets are available upon request.

The raw data for the MAQC datasets were obtained from the MAQC website [39]. The evaluation based on POG was done with 12 datasets produced by the MAQC project [21] in which two RNA sample types and two mixtures of the original samples were used: Sample A, a universal human reference RNA; Sample B, a human brain reference RNA; Sample C, which consisted of 75 and 25% of Sample A and B respectively; and Sample D, which consisted of 25 and 75% of Sample A and B respectively. Five replicate experiments for each of the four sample types at six independent test sites (Sites 1–6) were conducted, and, thus there are 20 files at each site. The data preprocessing was performed at each site. The application of the gene ranking methods was independently performed for comparisons of "Sample A versus B" and "Sample C versus D".

Abbreviations

AUC: area under ROC curve; CP: Choe's preferred (method); DEG: differentially expressed gene; DFW: distribution-free weighted (method); FARMS: factor analysis for robust microarray summarization; FC: fold change; FP: false positive; ibmT: intensity-based moderated t-statistic; MAQC: microarray quality control (project); MAS: (Affymetrix) MicroArray Suite version 5; MBEI: model-based expression index; mmgMOS: multi-mgMOS; modT: moderated t-statistic; PLIER: probe logarithmic intensity error; POG: percentage of overlapping genes; PPLR: probability of positive log ratio; RMA: robust multi-chip average; ROC: receiver operating characteristic; RP: rank products; samT: significance analysis of microarrays; shrinkT: shrinkage t-statistic; TP: true positive; VSN: variance stabilization; WAD: weighted average difference (method).

Competing interests

The authors declare that they have no competing interests.

Authors' contributions

KK performed analysis and wrote the paper. YN performed analysis. KS provided critical comments and led the project.

Supplementary Material

Additional File 1:

Detailed information for Datasets 3–38.

Additional File 2:

POG values for PLIER-, VSN-, mmgMOS-, MBEI-, GCRMA-, MAS-, RMA-, and DFW-preprocessed data. Legends are the same as given in Figure Figure11.

Additional File 3:

R-code for analyzing Dataset 4.

Acknowledgements

This study was supported by Special Coordination Funds for Promoting Science and Technology and by KAKENHI (21710208) to KK from the Japanese Ministry of Education, Culture, Sports, Science and Technology (MEXT). We also thank Richard Pearson for his helpful advice on how to execute the puma library on R.

References

  • Kadota K, Nakai Y, Shimizu K. A weighted average difference method for detecting differentially expressed genes from microarray data. Algorithm Mol Biol. 2008;3:8. doi: 10.1186/1748-7188-3-8. [PMC free article] [PubMed] [Cross Ref]
  • Pearson RD. A comprehensive re-analysis of the Golden Spike data: towards a benchmark for differential expression methods. BMC Bioinformatics. 2008;9:164. doi: 10.1186/1471-2105-9-164. [PMC free article] [PubMed] [Cross Ref]
  • Irizarry RA, Wu Z, Jaffee HA. Comparison of Affymetrix GeneChip expression measures. Bioinformatics. 2006;22:789–794. doi: 10.1093/bioinformatics/btk046. [PubMed] [Cross Ref]
  • Hubbell E, Liu WM, Mei R. Robust estimators for expression analysis. Bioinformatics. 2002;18:1585–1592. doi: 10.1093/bioinformatics/18.12.1585. [PubMed] [Cross Ref]
  • Irizarry RA, Hobbs B, Collin F, Beazer-Barclay YD, Antonellis KJ, Scherf U, Speed TP. Exploration, normalization, and summaries of high density oligonucleotide array probe level data. Biostatistics. 2003;4:249–264. doi: 10.1093/biostatistics/4.2.249. [PubMed] [Cross Ref]
  • Chen Z, McGee M, Liu Q, Scheuermann RH. A distribution free summarization method for Affymetrix GeneChip arrays. Bioinformatics. 2007;23:321–327. doi: 10.1093/bioinformatics/btl609. [PubMed] [Cross Ref]
  • Breitling R, Armengaud P, Amtmann A, Herzyk P. Rank products: a simple, yet powerful, new method to detect differentially regulated genes in replicated microarray experiments. FEBS Lett. 2004;573:83–92. doi: 10.1016/j.febslet.2004.07.055. [PubMed] [Cross Ref]
  • Smyth GK. Linear models and empirical bayes methods for assessing differential expression in microarray experiments. Stat Appl Genet Mol Biol. 2004;3:Article3. [PubMed]
  • Tusher VG, Tibshirani R, Chu G. Significance analysis of microarrays applied to the ionizing radiation response. Proc Natl Acad Sci USA. 2001;98:5116–5121. doi: 10.1073/pnas.091062498. [PMC free article] [PubMed] [Cross Ref]
  • Opgen-Rhein R, Strimmer K. Accurate ranking of differentially expressed genes by a distribution-free shrinkage approach. Stat Appl Genet Mol Biol. 2007;6:Article9. [PubMed]
  • Sartor MA, Tomlinson CR, Wesselkamper SC, Sivaganesan S, Leikauf GD, Medvedovic M. Intensity-based hierarchical Bayes method improves testing for differentially expressed genes in microarray experiments. BMC Bioinformatics. 2006;7:538. doi: 10.1186/1471-2105-7-538. [PMC free article] [PubMed] [Cross Ref]
  • Li C, Wong WH. Model-based analysis of oligonucleotide arrays: expression index computation and outlier detection. Proc Natl Acad Sci USA. 2001;98:31–36. doi: 10.1073/pnas.011404098. [PMC free article] [PubMed] [Cross Ref]
  • Choe SE, Boutros M, Michelson AM, Church GM, Halfon MS. Preferred analysis methods for Affymetrix GeneChips revealed by a wholly defined control dataset. Genome Biol. 2005;6:R16. doi: 10.1186/gb-2005-6-2-r16. [PMC free article] [PubMed] [Cross Ref]
  • Hubbel E. PLIER White Paper. Affymetrix, Santa Clala, California; 2005.
  • Wu Z, Irizarry RA, Gentleman R, Martinez-Murillo F, Spencer F. A Model-Based Background Adjustment for Oligonucleotide Expression Arrays. J Am Stat Assoc. 2004;99:909–918. doi: 10.1198/016214504000000683. [Cross Ref]
  • Liu X, Milo M, Lawrence ND, Rattray M. A tractable probabilistic model for Affymetrix probe-level analysis across multiple chips. Bioinformatics. 2005;21:3637–3644. doi: 10.1093/bioinformatics/bti583. [PubMed] [Cross Ref]
  • Hochreiter S, Clevert DA, Obermayer K. A new summarization method for Affymetrix probe level data. Bioinformatics. 2006;22:943–949. doi: 10.1093/bioinformatics/btl033. [PubMed] [Cross Ref]
  • Baldi P, Long AD. A Bayesian framework for the analysis of microarray expression data: regularized t-test and statistical inference of gene changes. Bioinformatics. 2001;17:509–519. doi: 10.1093/bioinformatics/17.6.509. [PubMed] [Cross Ref]
  • Liu X, Milo M, Lawrence ND, Rattray M. Probe-level measurement error improves accuracy in detecting differential gene expression. Bioinformatics. 2006;22:2107–2113. doi: 10.1093/bioinformatics/btl361. [PubMed] [Cross Ref]
  • Huber W, von Heydebreck A, Sultmann H, Poustka A, Vingron M. Variance stabilization applied to microarray data calibration and to the quantification of differential expression. Bioinformatics. 2002;18:S96–104. [PubMed]
  • MAQC Consortium The MicroArray Quality Control (MAQC) project shows inter- and intraplatform reproducibility of gene expression measurements. Nat Biotechnol. 2006;24:1151–1161. doi: 10.1038/nbt1239. [PMC free article] [PubMed] [Cross Ref]
  • Affycomp II website http://affycomp.biostat.jhsph.edu/
  • AffyDEComp website http://www.bioinf.manchester.ac.uk/affydecomp/
  • Kadota K, Araki R, Nakai Y, Abe M. GOGOT: a method for the identification of differentially expressed fragments from cDNA-AFLP data. Algorithm Mol Biol. 2007;2:5. doi: 10.1186/1748-7188-2-5. [PMC free article] [PubMed] [Cross Ref]
  • Shi L, Jones WD, Jensen RV, Harris SC, Perkins RG, Goodsaid FM, Guo L, Croner LJ, Boysen C, Fang H, Qian F, Amur S, Bao W, Barbacioru CC, Bertholet V, Cao XM, Chu TM, Collins PJ, Fan XH, Frueh FW, Fuscoe JC, Guo X, Han J, Herman D, Hong H, Kawasaki ES, Li QZ, Luo Y, Ma Y, Mei N, Peterson RL, Puri RK, Shippy R, Su Z, Sun YA, Sun H, Thorn B, Turpaz Y, Wang C, Wang SJ, Warrington JA, Willey JC, Wu J, Xie Q, Zhang L, Zhang L, Zhong S, Wolfinger RD, Tong W. The balance of reproducibility, sensitivity, and specificity of lists of differentially expressed genes in microarray studies. BMC Bioinformatics. 2008;9:S10. doi: 10.1186/1471-2105-9-S9-S10. [PMC free article] [PubMed] [Cross Ref]
  • Lemieux S. Probe-level linear model fitting and mixture modeling results in high accuracy detection of differential gene expression. BMC Bioinformatics. 2006;7:391. doi: 10.1186/1471-2105-7-391. [PMC free article] [PubMed] [Cross Ref]
  • Xu J, Cui X. Robustified MANOVA with applications in detecting differentially expressed genes from oligonucleotide arrays. Bioinformatics. 2008;24:1056–1062. doi: 10.1093/bioinformatics/btn053. [PubMed] [Cross Ref]
  • Nakai Y, Hashida H, Kadota K, Minami M, Shimizu K, Matsumoto I, Kato H, Abe K. Up-regulation of genes related to the ubiquitin-proteasome system in the brown adipose tissue of 24-h-fasted rats. Biosci Biotechnol Biochem. 2008;72:139–148. doi: 10.1271/bbb.70508. [PubMed] [Cross Ref]
  • Ge H, Cheng C, Li LM. A probe-treatment-reference (PTR) model for the analysis of oligonucleotide expression microarrays. BMC Bioinformatics. 2008;9:194. doi: 10.1186/1471-2105-9-194. [PMC free article] [PubMed] [Cross Ref]
  • Binder H, Preibisch S. "Hook"-calibration of GeneChip-microarrays: Theory and algorithm. Algorithm Mol Biol. 2008;3:12. doi: 10.1186/1748-7188-3-12. [PMC free article] [PubMed] [Cross Ref]
  • Binder H, Krohn K, Preibisch S. "Hook"-calibration of GeneChip-microarrays: Chip characteristics and expression measures. Algorithm Mol Biol. 2008;3:11. doi: 10.1186/1748-7188-3-11. [PMC free article] [PubMed] [Cross Ref]
  • Barrett T, Troup DB, Wilhite SE, Ledoux P, Rudnev D, Evangelista C, Kim IF, Soboleva A, Tomashevsky M, Edgar R. NCBI GEO: mining tens of millions of expression profiles–database and tools update. Nucleic Acids Res. 2007:D760–D765. doi: 10.1093/nar/gkl887. [PMC free article] [PubMed] [Cross Ref]
  • R Foundation for Statistical Computing . R: A Language and Environment for Statistical Computing. Vienna, Austria; 2006.
  • Gentleman RC, Carey VJ, Bates DM, Bolstad B, Dettling M, Dudoit S, Ellis B, Gautier L, Ge Y, Gentry J, Hornik K, Hothorn T, Huber W, Iacus S, Irizarry R, Leisch F, Li C, Maechler M, Rossini AJ, Sawitzki G, Smith C, Smyth G, Tierney L, Yang JY, Zhang J. Bioconductor: open software development for computational biology and bioinformatics. Genome Biol. 2004;5:R80. doi: 10.1186/gb-2004-5-10-r80. [PMC free article] [PubMed] [Cross Ref]
  • Gautier L, Cope L, Bolstad BM, Irizarry RA. affy–analysis of Affymetrix GeneChip data at probe level. Bioinformatics. 2004;20:307–315. doi: 10.1093/bioinformatics/btg405. [PubMed] [Cross Ref]
  • Hong F, Breitling R, McEntee CW, Wittner BS, Nemhauser JL, Chory J. RankProd: a Bioconductor package for detecting differentially expressed genes in meta-analysis. Bioinformatics. 2006;22:2825–2827. doi: 10.1093/bioinformatics/btl476. [PubMed] [Cross Ref]
  • The R-code for DFW http://faculty.smu.edu/mmcgee/dfwcode.pdf
  • The R-code for ibmT http://eh3.uc.edu/r/ibmtR.R
  • The MAQC website http://edkb.fda.gov/MAQC/MainStudy/upload/

Articles from Algorithms for Molecular Biology : AMB are provided here courtesy of BioMed Central
PubReader format: click here to try

Formats:

Related citations in PubMed

See reviews...See all...

Cited by other articles in PMC

See all...

Links

  • MedGen
    MedGen
    Related information in MedGen
  • PubMed
    PubMed
    PubMed citations for these articles

Recent Activity

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

See more...