Logo of bmcgenoBioMed Centralsearchsubmit a manuscriptregisterthis articleBMC Genomics
BMC Genomics. 2008; 9: 515.
Published online Oct 31, 2008. doi:  10.1186/1471-2164-9-515
PMCID: PMC2615449

Multiple genome alignment for identifying the core structure among moderately related microbial genomes

Abstract

Background

Identifying the set of intrinsically conserved genes, or the genomic core, among related genomes is crucial for understanding prokaryotic genomes where horizontal gene transfers are common. Although core genome identification appears to be obvious among very closely related genomes, it becomes more difficult when more distantly related genomes are compared. Here, we consider the core structure as a set of sufficiently long segments in which gene orders are conserved so that they are likely to have been inherited mainly through vertical transfer, and developed a method for identifying the core structure by finding the order of pre-identified orthologous groups (OGs) that maximally retains the conserved gene orders.

Results

The method was applied to genome comparisons of two well-characterized families, Bacillaceae and Enterobacteriaceae, and identified their core structures comprising 1438 and 2125 OGs, respectively. The core sets contained most of the essential genes and their related genes, which were primarily included in the intersection of the two core sets comprising around 700 OGs. The definition of the genomic core based on gene order conservation was demonstrated to be more robust than the simpler approach based only on gene conservation. We also investigated the core structures in terms of G+C content homogeneity and phylogenetic congruence, and found that the core genes primarily exhibited the expected characteristic, i.e., being indigenous and sharing the same history, more than the non-core genes.

Conclusion

The results demonstrate that our strategy of genome alignment based on gene order conservation can provide an effective approach to identify the genomic core among moderately related microbial genomes.

Background

A growing body of evidence is supporting the idea that horizontal gene transfers (HGT) have played a significant role in prokaryotic genome evolution [1-6]. Although these observations have stimulated researchers to develop a new paradigm of HGT-driven reticulate evolution that challenges the traditional tree-based phylogeny concept [7-9], it can be argued that prokaryotic phylogeny can still be inferred using a certain subset of genes ("core genes") that have mainly transferred vertically throughout evolution [10-12]. In fact, the genes constituting a prokaryotic genome appear to be divided into two classes: a "core gene pool" that comprises intrinsic genes encoding the proteins of basic cellular functions, and a "flexible gene pool" that comprises HGT-acquired genes encoding proteins which function under particular conditions, such as genomic islands [13]. Therefore, the identification of the genomic core conserved among each taxonomic group is crucial, not only for establishing the identity of each taxonomic group, but also for understanding prokaryotic diversity and evolution. Moreover, in a practical sense, the genomic core concept should also play a key role in summarizing genomic databases, which continue to grow explosively [14,15].

However, the best way to define core genomes is yet to be established. Although the term "core genome" has been used in various contexts, in the context of intraspecific comparisons, "core genome" is typically defined as a set of genes shared by all strains, while "pan-genome" is defined as the union of genes contained in all the strains considered [16-18]. This definition of "core genome" can also be applied to genus-level comparisons [19], and actually, similar types of analyses have been conducted for comparisons of even more distantly related genomes [20,21]. However, with such strict criteria, the number of core genes often decreases excessively as the number of target genomes increases [22], since the sets of genes required for life can vary between organisms living in different environments. The problem can be avoided by using a relaxed conservation criterion rather than strict universality [22], but the problem of how to define a biologically meaningful core still remains. Moreover, despite several studies on how to establish plausible orthologous groups [23-26], the problem of identifying genuine orthologs is still difficult, especially for the comparison of prokaryotic genomes where horizontal transfers are common. In fact, in a strict sense, "genuine ortholog" is only meaningful when the genes have been transmitted vertically, and in that sense, "core genome" and "genuine ortholog" are closely related concepts.

Due to the accumulation of microbial genomic data, we can now compare genomes at various levels of relatedness [14]. In this work, we focused on comparisons of moderately related genomes (more specifically, in the taxonomic rank family), which we consider to be key for understanding prokaryotic evolution since they bridge the gap between the knowledge of short-term evolution and that of long-term evolution. Among such genomes, typically the gene orders are partially conserved, and this information can be used to identify genuine orthologs (except in the case where HGT is included by homologous recombination or independent insertions of segments carrying the same set of genes at orthologous loci in different genomes; see the Discussion section).

Here, we consider the structural core gene set, or simply the core structure, of moderately related genomes; this core gene set is defined as the set of sufficiently long consecutive genomic segments in which gene orders are conserved among multiple genomes so that they are likely to have been inherited from a common ancestor mainly through vertical transfer (hereafter, unless otherwise stated, by "core" we mean this type of core gene set, whereas we use "universal" to refer to the genes shared by all the genomes considered). For this purpose, we developed a graph-based algorithm for aligning conserved regions of multiple genomes, which finds the order of pre-identified gene families that retains to the greatest possible extent the conserved gene orders (Figure (Figure1).1). To confirm that our definition of the core structure is indeed biologically meaningful, we applied our method to genome comparisons of two well-characterized families, Bacillaceae and Enterobacteriaceae, and characterized the resulting core structures in terms of gene functions, essentiality, G+C content homogeneity and phylogenetic congruence.

Figure 1
Schematic illustration of the core genome construction procedure. (A) A "core genome alignment" is defined as the order of pre-identified conserved OGs (vertical lines) which retains to the greatest possible extent the conserved neighborhood relationships ...

Results

CoreAligner: procedure for constructing a core genome alignment

Our program for constructing core structures, named CoreAligner, requires a set of well-conserved orthologous groups (OGs). Here, we compiled a set of OGs using the DomClust algorithm [24] on the MBGD server [14], and considered an OG as "conserved" when it was present in at least half of the genomes (the parameter CONS_RATIO = 0.5). Next, conserved neighborhood pairs were extracted from the pairs of conserved OGs. We considered that two OGs are in a neighborhood in a given genome if they are located within 20 genes (MAX_GAP = 20) in that genome, and that the OG pair is conserved if the two OGs in that pair are in the same neighborhood in at least half of the genomes (the parameter NBR_CONS_RATIO, which was set equal to CONS_RATIO throughout this work). A neighborhood graph, G0 = (V, E), was then constructed with the set of conserved OGs, V, and the set of conserved neighborhood relationships, E.

Our algorithm for constructing the alignments of the core genome structures is based on finding the longest path of the conserved neighborhood graph (Figure (Figure1).1). A similar algorithm has been previously developed [27] mainly for identifying much shorter but more widely conserved gene clusters such as operons and über-operons [28], but unlike their method, our method considers not only genes in the same direction but also those in the opposite direction as neighboring genes, and thereby generally generates longer alignments. In addition, our method uses the dynamic programming (DP) algorithm for calculating the longest path. To apply the DP algorithm, we devised a heuristic scheme comprising a series of preprocessing procedures to convert the initial conserved neighborhood graph, G0, into a directed acyclic graph, G3 (see Methods). After that, the extracted longest path is added to the core structure when the path consists of more than 10 OGs (MIN_CLUSTER = 10) and at least half of the genes (OGs) in that path are present in every genome (SP_COVER = 0.5). The procedure is repeated to find the next longest path in the remaining graph and the iteration is continued until all such paths are found.

Core genome structure of Bacillaceae and Enterobacteriaceae

We used two sets of moderately related genomes: eight species belonging to the family Bacillaceae and eight species belonging to the family Enterobacteriaceae (Table (Table1),1), among which gene orders are partially conserved (see Additional file 1 for pairwise dotplots). In addition, we used Staphylococcus aureus and Vibrio cholerae as outgroup species. We excluded endosymbionts with extremely reduced genomes such as Buchnera and Wigglesworthia from the Enterobacteriaceae set, although we included in the analysis an endosymbiont, Sodalis glossinidius, that has a chromosome of more than 4 Mb containing 2432 open reading frames (ORFs) [29]. On the basis of the pairwise comparisons among these genomes (Additional file 1), we considered that two pairs of genomes (Bacillus subtilis and Bacillus licheniformis; Bacillus anthracis and Bacillus cereus) in the Bacillaceae set and a set of three genomes (Escherichia coli, Salmonella enterica and Enterobacter sp. 638) in the Enterobacteriaceae set are related sufficiently closely that they can be counted only once (Table (Table1).1). Consequently, the effective number of genomes was six in both sets.

Table 1
Genomic data used in this work.

By applying the CoreAligner program to these datasets, we obtained the alignments of the core structures of the Bacillaceae and Enterobacteriaceae genomes comprising 1438 and 2125 OGs, respectively (Figure (Figure22 and Additional file 2; for a full list of core genes, see Additional file 3). The number of Bacillaceae core genes is about a third of the number of genes in the B. subtilis genome (4105), and the number of Enterobacteriaceae core genes is about half of the number of genes in the E. coli genome (4237), although the actual numbers of core genes and total genes are different among the organisms.

Figure 2
Core genome alignment of the Bacillaceae dataset. (A) Entire alignment; (B) a region around the comG operon that contains a local rearrangement; (C) a region around the replication origin; (D) a cluster of motility-related genes in which some of the genes ...

Table Table22 shows the number of deleted core OGs for each organism. The number of core genes is generally not correlated with the total number of genes in that genome. In fact, although the B. anthracis genome (5311) contains many more genes than the Geobacillus kaustophilus genome (3498), B. anthracis has lost many more core genes than G. kaustophilus; this is partly due to the partial loss of the motility-related genes in the former genome (see Figure Figure2D).2D). This indicates that the substantial size difference among genomes is primarily accounted for by the non-core genes, and any event yielding such a size difference affects the core genome structure to a lesser extent. On the other hand, among the Enterobacteriaceae, the S. glossinidius genome, which has the smallest number of genes, has lost the largest number of core genes; the number of its core genes is even smaller than that of the outgroup species V. cholerae. The genome sequence of S. glossinidius exhibits massive genome erosion, which supports the idea of the recent establishment of its endosymbiosis with the tsetse fly [29]. In this case, this erosion process appears to have had an influence even upon the reduction of the core structure. Similarly, the Serratia proteamaculans genome, which has the largest number of genes, also has the largest number of core genes among the Enterobacteriaceae (Table (Table2),2), although it is unclear whether or not this extremely high conservation of the core structure in the S. proteamaculans genome is indeed related to its large genome size.

Table 2
The number of deleted core orthologous groups in each genome.

The chromosomal arrangements of the core structures are somewhat different between these datasets (Figure (Figure3).3). Especially, a remarkable conservation was observed in the chromosomal arrangement of the Bacillaceae core structure: the core genes are highly clustered and their overall arrangements are well conserved, except some symmetrical inversions near the replication terminus, a typical pattern of bacterial chromosomal rearrangement [30]. In contrast, the sizes of the gaps between the core regions vary substantially among genomes, and most of the species-specific genes are inserted in these flexible regions. On the other hand, the core genes of Enterobacteriaceae are less clustered and more highly shuffled, although from the sequence comparisons they generally appear to be more closely related to each other than the Bacillaceae genomes (see Additional file 1, upper right). Nonetheless, they also primarily show the typical symmetrical inversion pattern around the replication origin.

Figure 3
Chromosomal arrangements of the core genes along each genome in Bacillaceae (left) and Enterobacteriaceae (right). Here, only OGs that are universally conserved in a one-to-one correspondence are connected. Core OGs are colored from red to yellow to green ...

Functional characteristics of the structural core gene sets

Next, we examined what kinds of genes are included in the core gene sets. We considered the B. subtilis and E. coli genomes as reference genomes and characterized each gene in these genomes using the functional categories defined in the KEGG Orthology database [31]. We also categorized each gene in these genomes into the following six classes: A) universal core, B) conserved core C) universal non-core, D) conserved non-core, E) non-conserved and non-unique, and F) unique, where "universal" means that the genes are conserved in all the genomes tested, "conserved" means that the genes are conserved in at least half of the genomes examined (the condition included in the definition of "core"), and "unique" means that the genes are unique to the reference genome (B. subtilis or E. coli); thus, "universal non-core" genes, for example, are genes conserved in all genomes but not included in the core set (i.e., syntenically not conserved).

Figure Figure44 shows the proportion of these six classes for each KEGG functional category. Although the overall proportions of core genes (A+B) are quite different between these families, the two graphs primarily exhibit a similar tendency: the functional categories related to primary metabolism, genetic information processing and cellular processes generally contain a higher proportion of core genes, while the categories of membrane transport, signal transduction and secondary metabolism contain a lower proportion thereof. Spearman's rank correlation coefficient between the two 20-dimensional vectors of the core gene proportions is ρ = 0.86, which confirms the high similarity of these distributions. Since those categories with a smaller core proportion mentioned above are likely to be related to adaptation to specific environments, this observation supports the notion that the genes included in the core structures indeed tend to play core functional roles.

Figure 4
Proportion of core and other classes in each KEGG functional category in the reference genome. The numbers in parentheses after each category name are the numbers of genes in B. subtilis and E. coli, respectively.

To see to what extent the core gene sets cover the functionally important genes, we examined the existence of the essential gene sets that were identified from the systematic gene deletion experiments in B. subtilis [32] and E. coli [33]. In total, 251 out of 271 essential genes (92.6%) were included in the B. subtilis core gene set, and 275 out of 297 essential genes (92.6%) were included in the E. coli core gene set (Additional file 4). Therefore, most of the essential genes were included in our core gene sets in both cases. In effect, the coverage of the essential genes in the core gene sets might be even larger, because most of the non-core essential genes are not universally conserved. For example, among the B. subtilis essential genes that are not included in the core gene set are the cell-wall teichoic-acid biosynthesis genes (tag), the lack of whose orthologs in G. kaustophilus genome has been previously reported [34], suggesting that the essentiality of this system is not universal. A similar conclusion can be drawn from the comparison of the two independently identified E. coli essential gene sets [33,35]. When we consider the intersection of the essential gene set of Baba and that of Kato, the coverage increases up to 98.1% (256 out of 261 essential genes; genes without an asterisk in Additional file 4).

Actually, the core gene sets of Bacillaceae and Enterobacteriaceae share some common orthologs. To visualize this, we identified the orthologous relationships between these datasets by applying the DomClust program to the combined dataset (Figure (Figure5A).5A). The two core gene sets share 637 combined OGs that contain 703 and 682 OGs in Bacillaceae and Enterobacteriaceae, respectively (class CC: core to core), where the increase in the number of OGs in each set is primarily due to lineage-specific duplications in each family. On the other hand, 142 and 559 core OGs in Bacillaceae and Enterobacteriaceae, respectively, have some orthologs in the counterpart families that are not included in the core OG set (class CO: core to non-core ortholog), and 593 and 884 core OGs, respectively, are specific to each family (class CN: core to none). As expected, the majority of the essential genes (around 200 genes for each) are included in the CC class. To further examine the difference among these types, we studied the proportions of the KEGG functional categories (Figure (Figure5B).5B). The "core functional" characteristics of the core genes described above appear to be mainly linked to the CC class. In fact, most of the genes involved in primary metabolism and information processing are included in the CC class (Figure (Figure5B;5B; see also the KEGG map shown in Additional file 5). On the other hand, one prominent feature of the CN class in the Bacillaceae core is the larger proportion of the sporulation function, an obvious Bacillus-specific function. In the CN class, the majority of OGs are uncategorized, while in the CC class the proportion of uncategorized OGs is around 30%.

Figure 5
Overlap between the core OG sets of Bacillaceae and Enterobacteriaceae. (A) A Venn diagram showing the number of core OGs defined in Bacillaceae and Enterobacteriaceae that overlap each other. For each family, the outer circle indicates the entire gene ...

Parameter dependency and robustness of the method

Our method of core structure extraction includes some arbitrary parameters, among which the two most important ones are CONS_RATIO and MAX_GAP, which define the degree of conservation required for core genes and the neighborhood of each gene, respectively (note that we set NBR_CONS_RATIO = CONS_RATIO). Here, we examined the dependency of these parameters on the results of the core extraction in terms of the total number of genes in the core set and the number of essential genes contained in the core set (Figure (Figure6A6A).

Figure 6
Results of the parameter dependency test and the robustness test. (A) The parameter dependency test. The total number of OGs (line, left axis) and the number of essential genes (bar, right axis) included in the core set generated from the Bacillaceae ...

When the CONS_RATIO parameter was tightened from 0.33 (2/6) to 1.0 (6/6), the number of the resulting core gene set decreased from 1690 to 834 in Bacillaceae and 2196 to 818 in Enterobacteriaceae (Figure (Figure6A,6A, left). Thus, the size of the core gene set can be greatly influenced by the CONS_RATIO parameter. On the other hand, the effect of the MAX_GAP parameter was relatively small (Figure (Figure6A,6A, right). The number of essential genes included in the core gene set generally increased as the number of core genes increased, but this number appeared to almost reach the maximal value with our default parameter set (CONS_RATIO = 0.5, MAX_GAP = 20). Thus, we can very roughly say that, by using our default parameter set, we were able to obtain the smallest core gene set that almost maximally covers the essential genes.

Next, we examined the robustness of the resulting core structures when changing the set of input genomes. In this test, we extracted six genomes for each family by choosing a representative genome from each set of closely related genomes (organisms with an asterisk in Table Table1),1), and generated all the possible subsets containing two to five genomes. Then, using each of these subsets as the input genome, we ran the CoreAligner program to define the core structure and counted the number of resulting core OGs. We also examined the numbers of universal (CONS_RATIO = 1) and conserved (CONS_RATIO = 0.5) OGs (regardless of whether they belonged to the core or not) that were counted using the same subsets of genomes. Figure Figure6B6B shows the average number of the core, universal and conserved gene sets for each number of input genomes. As expected, the number of universal genes decreases monotonically as the number of genomes increases. In contrast, the number of conserved genes fluctuates widely with the change in the number of genomes, probably because the actual CONS_RATIO values fluctuate due to the rounding-up effect even when a constant cutoff value (0.5) is used. Curiously, the distributions of these average values appear to be very similar between Bacillaceae and Enterobacteriaceae, although the latter has much larger variances than the former. On the other hand, the number of core genes is quite different in the two families, as already mentioned in the previous sections. This clearly indicates that our criterion based on syntenic conservation defines a quite different set of core genes than the criterion based only on the presence of genes in each genome. Moreover, the number of core genes shows a relatively stable pattern in both families (Figure (Figure6B).6B). In fact, although similar fluctuations, probably due to the rounding-up effect, are again observed, the magnitude of fluctuation is much smaller than that for the conserved genes described above. These observations suggest that the use of synteny information with a relaxed conservation criterion (CONS_RATIO < 1) helps the CoreAligner program to identify robust and reliable core gene sets, although the setting of the CONS_RATIO parameter still remains somewhat arbitrary.

G+C content of the third codon positions

Our main working hypothesis is that the core structure extracted here is mainly inherited through vertical transfers throughout evolution. Several methods have been developed for identifying horizontally transferred genes [4], and detecting anomalous nucleotide compositions is a common approach for identifying them using a target genomic sequence alone [36-40]. Among them, the G+C content of the third codon positions (GC3) is the most basic but still an effective characteristic, although the "amelioration" process unfolding in the course of genomic evolution may diminish its effectiveness [41]. Since it is known that highly expressed genes such as ribosomal proteins also have specifically biased codon usage that generally correlates with tRNA abundance [42], we predicted highly expressed genes based on the codon usage of ribosomal proteins [43] and eliminated them from the analysis.

We calculated the GC3 values of the genes in each genome and examined their distribution for each of the six classes, A-F, defined above (Figure (Figure7,7, upper). The GC3 values of the class-A genes (core-universal) show bell-shaped distributions with relatively sharp peaks. Similar distributions can be seen in classes B (core-conserved), C (noncore-universal) and D (noncore-conserved), but their shapes and sizes are different depending on the organism. The distributions of classes E (nonconserved) and F (unique) are generally broader and of a more irregular shape. The range of each distribution can be seen more clearly in the box plots (Figure (Figure7,7, lower), which show that, generally, the core genes (A and B) are distributed within smaller ranges than the non-core genes. To examine the relationship in a more quantitative manner, we calculated the mean and the standard deviation for each distribution and compared the results (Additional file 6). We can confirm that the standard deviation generally increases in the order of A to F, and more specifically, that the relationship A, B < C, D < E, F holds in all of the 16 genomes, except that the latter inequality does not hold in the S. glossinidius genome where the number of non-core genes is extremely small. The smaller variance of the GC3 percentage of the core genes appears to support our working hypothesis that the core structure is generally indigenous to each genome.

Figure 7
Distribution of the GC3 percentages. The distributions are shown for each of the six classes, A-F, as a histogram (upper) and a box plot (lower) for each genome. In each box plot, whiskers are extended at most 2.5 times the interquartile range, and outliers ...

From the box plots in Figure Figure7,7, we can see that there are some outliers in the core classes, and in some cases the number of outliers in the core classes is even larger than that of outliers in the non-core classes. However, we should notice that the number of genes and the distribution shapes are quite different among the classes, and thus a direct comparison of the number of outliers in these plots is meaningless. To understand this point more precisely, we identified the genes with significantly biased GC3 values using the condition |x-μ|/σ > 3.29, where μ and σ are the mean and the standard deviation, respectively, of the GC3 values of the core genes (classes A and B), and the cutoff value corresponded to p < 0.001 (for a single comparison) when normal distribution was assumed. Then, we compared the ratios of genes with biased GC3 values to the total number of genes between classes (Additional file 7). The result indicates that the ratios of the biased genes again generally increase in the order of A to F. Especially, the ratios are less than 1% in class A for all species and class B for most of the species, which is again consistent with our working hypothesis.

Phylogenetic analysis

If the core structure in each genome indeed shares the same evolutionary history, we can construct a very reliable phylogenetic tree by using a long concatenated sequence comprised of the core genes. For this purpose, we collected the universally conserved, one-to-one correspondence core OG sets comprising 712 and 1081 OGs for Bacillaceae and Enterobacteriaceae, respectively, and constructed phylogenetic trees using the concatenated alignments of the conserved blocks in these sequences comprising 199502 and 334889 residues, respectively. Using the neighbor-joining (NJ) method [44] and the maximum likelihood (ML) method [45], we were able to obtain highly resolved phylogenetic trees in which most of the branches, except some very short branches in the NJ trees, had bootstrap values of 100%, but the tree topologies constructed by different methods did not exactly coincide with each other (Figure (Figure8A).8A). In fact, such high confidence levels can be attained simply because of the extremely large sample sizes (number of alignment columns) and do not necessarily indicate the true reliability if there exists a systematic bias [46]. To examine whether the data indeed support tree-like phylogeny, we also constructed phylogenetic networks using the NeighborNet algorithm [47] (Figure (Figure8B).8B). The results showed that some internal branches exhibited a network-like (non-tree-like) structure that generally indicates a reticulate event such as horizontal transfer [48]. Especially, in the Enterobacteriaceae phylogeny, a network-like structure was found around the center of the phylogenetic radiation where the internal nodes were concentrated. Although the degree of incongruence appears not to be so large, this structure can obscure the phylogenetic relationship among organisms branching from there, and probably caused the above discrepancy of phylogeny.

Figure 8
Phylogenetic relationships among the core genes of Bacillaceae and Enterobacteriaceae. (A) Phylogenetic trees of the concatenated core sequences that were constructed using the neighbor-joining (NJ) method (by CLUSTALW) and the maximum likelihood (ML) ...

To further investigate the congruence among the core gene phylogenies, we constructed ML trees of individual core OGs and compared them. As a result, we found 208 and 370 distinct topologies in the Bacillaceae and Enterobacteriaceae datasets, respectively, which are fairly large considering that there exist only 945 possible topologies among the 7 taxa examined here; the majority-rule consensus trees of these individual trees showed the same or a similar topology to the concatenated ML trees (Figure (Figure8A)8A) (data not shown). We visualized the set of the resulting tree topologies using multidimensional scaling (MDS) analysis based on the Robinson-Foulds topological distance [49] (Figure (Figure8C).8C). The results were again contrasting: there are three distinct major topologies that correspond to the alternative topologies of the ambiguous relationship in the Bacillaceae dataset (enclosed by the dotted ellipse in Figure Figure8C,8C, left), whereas a more dispersed distribution can be observed in the Enterobacteriaceae dataset (Figure (Figure8C,8C, right). These observations clearly indicate that there is a severe limitation when inferring phylogeny using only a single or very few genes. The problem cannot be avoided even when using some "gold standard" genes; the phylogenetic topologies of the 16S and 23S rRNA sequences, the genes most conventionally used for inferring phylogeny, are located far from the representative topologies in our MDS plot (except Bacillaceae 23S rRNA, which is fairly close to the representative one) (Figure (Figure8C8C).

Unfortunately, the observed topology dispersion (Figure (Figure8C)8C) also appears to challenge our working hypothesis that all core genes share the same evolutionary history. However, we should consider the effect of the statistical fluctuation behind the variation of tree topology. To examine this, we performed a Shimodaira-Hasegawa (SH) test [50] for each of the core OGs and estimated the number of OGs whose individual ML tree topologies are significantly different from that of the representative genomic tree topology taken from the ML tree of the concatenated core sequences (see Figure Figure8A).8A). In this test, we also performed the same test using the non-core OGs that have a one-to-one correspondence; here, we considered non-universal OGs as well as universal ones because there are only a few universal non-core OGs, and summed up the results for each of the effective number of genomes (N) contained in the OGs (Table (Table3).3). When using a significance level of 5%, we found that 4.3% (32/739) and 4.1% (45/1099) of the core OGs of Bacillaceae and Enterobacteriaceae, respectively, with N = 7 had significantly different topologies from the representative one (Table (Table3).3). In other words, the observed number of significantly different cases was within the expected value (5%). Therefore, the number of incongruent cases may not be as large as it appears to be in Figure Figure8C.8C. In contrast, in total, around 20% of the tested non-core OGs had significantly different topologies at the 5% level (Table (Table3).3). Fisher's exact test showed that the number of incongruent cases of the non-core OGs was significantly larger than that of the core OGs, except in the case of N = 7 in Enterobacteriaceae, where the sample size of the non-core cases was extremely small (Table (Table3).3). Therefore, we can conclude that the core genes indeed have a greater tendency to exhibit congruent phylogenies, at least in comparison with the non-core genes. Note that a greater congruency of the core than that of the non-core is observed in virtually every group of effective number of genomes (N), indicating that the issue of whether it is the core or not is more directly connected to phylogenetic congruency than the universality of genes. Note also that the dataset used to construct the reference tree of this test is included in the cell of (N = 7, core) in Table Table3,3, which means that the comparison at N = 7 may be somewhat unfair but the comparisons at other N are not.

Table 3
The number of incongruent topologies detected by the Shimodaira-Hasegawa (SH) test.

Discussion

In this work, we developed a method for identifying the core structure among moderately related microbial genomes by constructing a genome alignment based on the consensus gene order. We applied the method to the genome sets of the families Bacillaceae and Enterobacteriaceae and characterized the resulting core structures in terms of gene function, essentiality, nucleotide content and phylogenetic relationship. The results showed that the core structures covered functionally important genes (Figure (Figure44 and Figure Figure5),5), including most of the essential genes (Additional file 4), and generally had more homogeneous GC3 values (Figure (Figure7)7) and phylogenetic tree topologies (Table (Table3)3) than the non-core genes. All of these characteristics are to be expected in light of the core genome concept. We also examined the parameter dependency and robustness of our method, and found that it can offer a more robust core genome definition than simpler approaches that consider only universality or a fixed conservation ratio as the criterion (Figure (Figure6B).6B). This robustness enabled us to define plausible core structures even when some of the genomes have degenerated due to changes in environmental conditions such as those arising from symbiosis (Table (Table2)2) that have made the existence of certain core genes unnecessary (as long as the ratio of degenerate genomes is sufficiently smaller than the CONS_RATIO parameter; actually, it is probably better to eliminate extremely small genomes to avoid unexpected effects). On the other hand, our method is dependent on the conservation ratio parameter (Figure (Figure6A).6A). Although we believe that the parameter setting used here is better for defining plausible core gene sets in terms of coverage of the core functions for both Bacillaceae and Enterobacteriaceae, we might need to use different parameters when we consider different taxonomic groups. In fact, it might be better to use more relaxed conditions when we analyze genomes whose core structure is subject to substantial disruption. Another related issue is the size of the core, which is likely to decrease when the diversity of the group for which the core is determined increases. Here, we showed that the core of Enterobacteriaceae (2125 genes) is larger than that of Bacillaceae (1438 genes), and that Bacillaceae is indeed more diverse than Enterobacteriaceae, at least in terms of sequence diversity (see Additional file 1, upper right and Figs. Figs.8A8A and and8B).8B). However, the relative frequencies of genomic rearrangement and nucleotide mutation may be different among different lineages, and to investigate this issue in a more quantitative manner, we need to extend the analysis to a broader range of taxonomic groups. Applying our method to more varied taxonomic groups is an important future task.

In this work, we used the coverage of the essential genes as an indicator for evaluating the core gene sets. Consequently, most of the functionally important genes are included in the resulting core gene sets, especially in the intersection of the two core gene sets (Figure (Figure5).5). On the other hand, the resulting core gene sets also include substantial uncharacterized genes, and many of the taxon-specific core genes are still functionally uncharacterized (see Figure Figure5,5, but note that the genes to which a KEGG category is assigned are not necessarily uncharacterized). It is natural to think that such taxon-specific core genes have some important but to date uncharacterized functions that are related to taxon-specific features, since they are likely to have been inherited in that taxon throughout evolution, although we generally need more extensive analysis with a greater variety of genomes to claim taxon specificity. However, we should also note that the significance of the gene order conservation of individual core genes can vary from gene to gene, and that some of them could be less important but co-inherited simply as "hitchhikers."

The rationale behind our definition of "core genome" as an indigenous, vertically transmitted structure based on syntenic conservation is that horizontally transferred genes are unlikely to insert themselves at the same chromosomal position. Although both the GC3 analysis and the phylogenetic analysis generally support the hypothesis that the extracted core genes are indigenous and share the same evolutionary history, there are some exceptional cases. For example, several genes with extremely biased GC3 values were found in the core genes (Figure (Figure7)7) and some core genes appear to have significantly different phylogenetic tree topologies from that of the concatenated core sequences (Figure (Figure88 and Table Table3).3). Although the SH test showed that the number of incongruent cases may not be as large as it appears to be (Table (Table3),3), it should be noted that the SH test has been suggested to be too conservative [12,51].

Actually, we used a relaxed criterion for syntenic conservation (CONS_RATIO < 1) in our core genome alignment procedure. Therefore, some of the exceptional cases could have arisen due to this relaxed criterion. Notable examples are shown in Figure Figure9,9, where two possible operons related to the histidine and tryptophan biosynthesis pathways, respectively, contain genes with significantly incongruent phylogeny identified by the SH test (Table (Table3).3). In both cases, the operonic structures are apparently translocated in the B. anthracis, B. cereus and O. iheyensis genomes from the conserved core arrangement (Figure (Figure9A),9A), and genes in the same set of genomes also form a cluster distinct from the other Bacillaceae genes in the phylogenetic tree of each family (Figure (Figure9B),9B), suggesting that these operonic structures were likely to be replaced with horizontally acquired ones in these organisms. Although only a limited number of significantly incongruent cases were found in the core by the SH test here, this phenomenon might be more common because we can find similar small local rearrangements in the resulting core structure (see Additional file 2). Nevertheless, we dot not consider it a serious problem, since it is an expected consequence of our definition of the core, where genes are inherited "mainly" rather than "exclusively" through vertical transfer. On the other hand, a more serious concern may arise if the gene order in the resulting core structure is only very poorly conserved, especially when one uses too large a MAX_GAP: the similarity of the relative gene location rather than the conservation of the exact gene order might be a result of convergent evolution, which is not what we expect. Although we think that the resulting core structures presented here are so well-ordered that they are unlikely to suffer from this problem, in order to avoid the problem in more general cases, we may need to introduce some solution, such as a statistical measure, to give guideline to users who must choose appropriate parameter values.

Figure 9
Examples of cases where phylogenetic incongruence and the local rearrangement of the core structure are linked to each other. (A) The core genome alignment of Bacillaceae around the histidine and tryptophan biosynthetic operons. The names of the genes ...

In addition to the problems arising from the relaxed conditions, there are more fundamental exceptions to the above rationale. One such exception occurs when horizontally transmitted segments insert themselves into the same (orthologous) target sites. In fact, we encountered such a case during the experimental construction of the Enterobacteriaceae core structure (Additional file 8), where the region is conserved in only four genomes, but in three of the four cases the region is located at the same site (adjacent to the yjdC gene). This region in the S. enterica genome indeed corresponds to the genomic island named "Stic134F" defined in the Islander database [52], and there are Phe-tRNA genes at both ends of each of these regions, which are likely to have been a common integration site of this island. We eliminated these regions by introducing a procedure to identify locally non-conserved regions in each genome (see Method, step 5). However, the current procedure depends on the somewhat ad hoc assumption that inserted segments exceed a certain length. Therefore, although we believe that the procedure worked at least for the dataset of this study, additional evidence, such as genes (or pseudogenes) or repetitive elements related to some mobile elements, might be needed to correctly identify such regions in more general cases, and one may need other tools (e.g., [53]) for such tasks.

Homologous recombination is another factor that can disrupt the evolutionary homogeneity of the core genes defined through synteny. Although the importance of recombination within a bacterial population has been demonstrated in several species [54,55], direct genetic exchange among the genomes compared here is very unlikely, because here we compared only moderately related genomes where nucleotide identities between orthologs are in many cases only 60–70% and hence there is little chance of having the sufficiently long identical segments required for successful homologous recombination [56-59]. However, we cannot exclude the possibility that recombination occurred frequently during a certain period after speciation, which might explain the observed network-like phylogeny (Figure (Figure8B).8B). In addition, a successive chain of recombination events between closely related sequences could result in genetic exchange between more distantly related genomes, and the recombination rate might have been elevated by inactivation followed by the reacquisition of mismatch repair proteins, as suggested for E. coli strains [60]. On the other hand, there are some exceptions to the above nucleotide identity range, among which the most notable ones are the rRNA genes; the identities between the rRNA genes are generally more than 90%. This might give a plausible explanation why the topologies of the rRNA gene trees are so different from those of the concatenated trees (Figure (Figure8C),8C), as pointed out previously [8,55]. In any case, the possibility of homologous recombination across a species boundary, if any, should be an inherent feature of prokaryotic genome evolution, and could have been involved in the core genome formation. Therefore, the extraction of core structures among genomes at various levels of relatedness can provide a basis for further studies of this phenomenon.

Although we have focused on the problem of identifying the genomic core among moderately related prokaryotic genomes throughout this work, our genome alignment method itself does not assume any particular prokaryote-specific features, and thus, in principle, can be applied to more general purposes, including eukaryotic genome comparison. There have been numerous studies on multiple genome comparison, which we think can be primarily classified into the following categories: (1) nucleotide sequence alignment among closely related genomes [61-64]; (2) gene order comparison among moderately related genomes for investigating the genomic rearrangement history [65-67]; (3) finding conserved gene clusters among distantly related genomes for identifying operons and über-operons [27,68,69]. At first glance, the problem of the present study may appear to be most similar to (2). In fact, the problem of finding consensus gene orders considered here can also be formulated as a median breakpoint problem assuming a star-like phylogeny [65]. However, here we used a strategy similar to that of Rogozin et al. [27], mainly because the core genome identification problem has a "local alignment"-like nature, in that its goal is to extract well-conserved genomic segments, in contrast to the general median problem whose goal is to find a consensus order that spans the entire genome. We think that our approach has a practical advantage especially for the bacterial core genome extraction described here, but possibly also for eukaryotic genome comparison when well-conserved regions are limited. One drawback of our current approach is that it assumes star-like phylogeny and cannot treat hierarchical phylogenetic relationships among genomes. One way of incorporating such relationships is to introduce a weighting scheme, which has been investigated in the field of multiple sequence alignment (e.g., [70]). Another more interesting approach is to consider the evolutionary scenario more explicitly when constructing an alignment (e.g., [71]). In any case, the incorporation of phylogenetic relationships is crucial for investigating the evolution (formation or erosion) of the core structure, which is an important next step toward understanding prokaryotic genome evolution.

Conclusion

The present study demonstrates that the procedure (CoreAligner) for multiple genome alignment based on gene order conservation can provide an effective approach to identify the genomic core among moderately related microbial genomes. Identifying the genomic cores among various taxonomic groups will provide a basis for further comparative studies utilizing the rapidly accumulating genomic data for understanding microbial diversity and evolution.

Methods

Preparation of genomic data

We used the Microbial Genome Database for Comparative Analysis (MBGD) [14,72] in order to construct the orthologous groups (OGs) of the specified sets of related genomes. In this work, we used two sets of genomes belonging to the families Bacillaceae and Enterobacteriaceae (Table (Table1),1), as per the NCBI Taxonomy database for taxonomic classification.

Construction of a core genome alignment by ordering the OGs

Our procedure, CoreAligner, for constructing an alignment of the core structure basically consists of finding the best conserved ordering of a pre-identified set of OGs. To construct the OGs, we used the DomClust algorithm implemented on the MBGD server, which can handle both inparalogous relationships and domain fusion/fission events in the process of ortholog grouping [24], although, in principle, other programs or databases can also be used for this purpose. Figure 10A gives an overview of the CoreAligner procedure, which consists of the following steps: 1) extraction of the conserved neighborhood relationships and construction of an initial conserved neighborhood graph, G0; 2) assignment of a consistent orientation based on the minimum spanning tree of G0 and construction of a directed graph, G1; 3) conversion of G1 into a triplet graph, G2, in which each edge represents the arrangement of three genes rather than two genes; 4) elimination of the loops from G2 and construction of a directed acyclic graph, G3; 5) identification of the paths of maximum weight on G3 using the dynamic programming algorithm; 6) construction of an alignment by restoring the original graph. In the following, we describe the procedure step by step.

Figure 10
The procedure for constructing a core genome alignment. (A) Overview of the procedure, which consists of the following steps: (1) Initial conserved neighborhood graph. The color of each edge (red or blue) indicates that two genes incident to it are in ...

Step 0: Extraction of the conserved OGs

Before the procedure, we retained only those OGs that are conserved among at least a given ratio (CONS_RATIO) of the total number of genomes. Throughout this procedure, the genomes that are close enough to each other are grouped so that the genomes in each group are counted only once in order to avoid bias; here, we used the species groups shown in Table Table1,1, which were determined through visual inspection of the pairwise comparison data (see Additional file 1). Let F denote the resulting set of conserved OGs, and let G be the set of genomes compared. We consider each genome, G [set membership] G, as an ordered gene list, LG = [g1, g2,..., gN], where each gene, gi, in LG is ordered according to the genomic position on G and belongs to one of the conserved OGs, Fj [set membership] F. Let orderG(g) denote the ordinal position of the gene, g, in the list LG. We define the distance between genes g1 and g2 on the circular genome, G, as Dist(g1, g2) = min [Diff(g1, g2),| LG|-Diff(g1, g2)], where Diff(g1, g2) = |orderG(g1)-orderG(g2)|.

Step 1: Generation of the initial conserved neighborhood graph

In this step, we extract the OG pairs that are located within MAX_GAP genes in at least NBR_CONS_RATIO (= CONS_RATIO, by default) of the total number of genomes and construct a conserved neighborhood graph. First, let us define a neighboring OG pair. A gene pair, g0, g1 [set membership] G, is a neighboring gene pair if Dist(g0, g1) ≤ MAX_GAP, and an OG pair, F0, F1 [set membership] F, is a neighboring OG pair if there exists a neighboring gene pair g0, g1 such that g0 [set membership] F0, g1 [set membership] F1. Let Ng(F0, F1) denote the set of neighboring gene pairs between F0 and F1. We also consider a relative direction for each neighborhood OG pair. The relative direction between two neighboring genes, denoted by Rdir(g0, g1), is either (L, L), (L, R), (R, L) or (R, R), where L and R signify the left and right end of each gene, respectively, and the relative direction between two neighboring OGs, denoted by Rdir(F0, F1), is determined by majority vote among (g0, g1) [set membership] Ng(F0, F1) (Figure 10B). In this majority vote, each neighboring gene pair is weighted as a function of the reciprocal of distance, weight(g0, g1) = [1/Dist(g0, g1)]α, with the parameter α. Throughout this work, we simply set α = 1.

Let c be the number of neighboring gene pairs in the majority direction, i.e., |{(g0, g1)|Rdir(g0, g1) = Rdir(F0, F1)}|. The pair (F0, F1) is considered to be a conserved OG pair if c satisfies the conservation criterion (c/N NBR_CONS_RATIO)). Among the conserved OG pairs, we further extract the proximal OG pairs, which are defined as follows: a conserved OG pair F0, F1 is a proximal conserved OG pair if there exists a pair of neighboring genes, g0 [set membership] F0, g1 [set membership] F1, between which there is no gene g2 [set membership] F2, such that either (F0, F2) or (F2, F1) is a conserved OG pair. Finally, the conserved neighborhood graph, G0 = (V0, E0), is constructed with vertices V0 = F and edges E0 [subset, dbl equals] V0 × V0 that are the set of proximal conserved OG pairs. On each edge, an edge weight is assigned as the sum of the weights of the neighboring gene pairs: Weight(F0,F1)=g0,g1Ng(F0,F1)1/Dist(g0,g1).

Step 2: Conversion to a directed graph (direction assignment)

In this step, we construct a minimum spanning tree (MST), TM, of the conserved neighboring graph, G0, and assign a consistent orientation to each vertex and edge based on the relative direction on each edge of the tree, TM; thus the procedure converts the undirected graph, G0, into a directed graph, G1. To construct the MST, a weighted distance is assigned to each edge (F0, F1) as Wdist(F0, F1) = 1/Weight(F0, F1), so that highly weighted edges are likely to be incorporated into the MST. For each F [set membership] F, a vertex orientation, Dir(F) = {1, -1}, is determined based on the MST TM as follows: starting from an arbitrary vertex, F0 [set membership] F, for which we set Dir(F0) = 1, the orientation is determined along each edge, (Fi, Fj) [set membership] TM, by Dir(Fj) = Dir(Fi) × sgn [Rdir(Fi, Fj)], where sgn(rdir) = 1 if rdir [set membership] {(R, L), (L, R)} and sgn(rdir) = -1 otherwise (see Figure 10B; in Figure 10A2, the node colors and edge colors represent Dir(Fi) and sgn [Rdir(Fi, Fj)], respectively, where red = 1 and blue = -1). In addition, the orientation of each edge, (Fi, Fj) [set membership] TM, is determined by Dir(Fi, Fj) = Dir(Fi) × side(Fi, Fj), where side(Fi, Fj) = 1 if Fj is on the right side of Fi and side(Fi, Fj) = -1 otherwise (Dir(Fi, Fj) is represented by an arrow in Figure 10A2). Here, the edge orientation represents the consensus gene order, and the node orientation represents the consensus gene orientation along the virtual genome. The orientation can be consistently assigned as long as it is done along a tree. In addition, for each remaining edge, (Fi, Fj) [set membership] {e|e [set membership] E0, e [negated set membership] TM} (broken lines in Figure 10A2), the edge orientation is calculated by the same formula, Dir(Fi, Fj) = Dir(Fi) × side (Fi, Fj), but the orientation is assigned only when the values calculated from both directions is consistent, i.e., Dir(Fi, Fj) = -Dir(Fj, Fi); otherwise, the edge is removed from the converted graph, G1 (X mark in Figure 10A2). Finally, a directed graph, G1 = (V1, E1), with vertices V1 = F and edges E1 [subset, dbl equals] V1 × V1 is constructed by connecting the vertices from Fi to Fj if Dir(Fi, Fj) = 1 and from Fj to Fi if Dir(Fi, Fj) = -1.

Step 3: Conversion to a triplet graph

In this step, the directed graph, G1, is converted into a triplet graph, G2, in which each edge represents the order of three OGs (Fi, Fj, Fk), rather than two OGs (Fi, Fj), as in each edge of the graph G1. For this purpose, a neighborhood OG list, Nf(g, side) = {F'|Dist(g, g') ≤ MAX_GAP, side(g, g') = side, g' [set membership] F'}, is prepared for each g [set membership] F and side [set membership] {-1,1} (-1 and 1 signify the left and right sides, respectively). To convert G1 = (V1, E1) into G2 = (V2, E2), we set V2 = E1, and connect each pair of edges in G1 incident to a node, Fj [set membership] V1, i.e., (Fi, Fj), (Fj, Fk) [set membership] E1 = V2, in G2 in this direction if there exist some genes, g [set membership] Fj, such that Fi [set membership] Nf(g,-1) ∧ Fk [set membership] Nf(g,1). This conversion guarantees that the triplet order (Fi, Fj, Fk) represented by each edge of the graph G2 will actually appear in at least some genomes (the parameter NBR_CONS_NUM2; default 2). Figure 10C shows a simple example illustrating the effect of this conversion. Here, the OG represented by node 2 contains two inparalogous subgroups, due to which the graph contains a loop (Figure 10C1). However, the triplet graph conversion linearizes the graph (Figure 10C2), since the path of 5-2-3 in the original graph, which is responsible for the loop formation, does not exist in the actual sequences.

Step 4: Conversion to a DAG (loop elimination)

Although the triplet graph conversion at the previous step can eliminate some trivial loops as described above, generally there still remain loops in the directed graph, G2. In this step, we eliminate all loops by removing some vertices from the graph G2 (corresponding to the edges of the graph G1) to make a directed acyclic graph (DAG), G3. Since the problem of finding the minimum number of vertices to cut in a directed graph required for making a DAG (the minimum feedback vertex set problem) is NP-hard, we used a heuristic method called a "contraction algorithm" [73], which returns a correct answer when the graph is completely contractible through a series of contraction operations defined in the algorithm; otherwise, the algorithm still returns a valid answer within a reasonable time period, although its optimality is not guaranteed. Fortunately, it turned out that all cases treated here were contractible and hence the algorithm could solve the problem correctly. We conjecture that the graph G2 is contractible in most cases if the compared genomes are sufficiently close.

Step 5: Extraction of the set of paths of maximum weight

In this step, we find the longest paths in the DAG, G3 = (V3, E2), using a DP algorithm. For this purpose, we assign a weight to each vertex, v [set membership] V3 = E1, which actually corresponds to a neighboring relationship (Fi, Fj), as Weight(v) = Weight(Fi, Fj). The basic recursion formula for finding the path of maximum weight is as follows:

TotalWeight(vm)=maxvnOut(vm)(TotalWeight(vn)+Weight(vm)),

where vn, vm[set membership] V3 and Out(vm) is the set of vertices in which the out-edges of vm enter. The pair of vertices in the above formula is saved as an arc (vm, vn) of a directed graph (a set of trees, or forest), TP, which can be backtracked to find the path of maximum weight. The extracted maximum path, which we here call a "cluster," is added to the core structure if it meets the following criteria: (1) it contains at least a given number of OGs (the parameter MIN_CLUSTER; default 10), and (2) at least a given proportion of OGs are present in each genome (the parameter SP_COVER; default 0.5). The latter criterion is required to eliminate lineage-specific clusters, which are likely to belong to phages or genomic islands rather than the genomic core.

In some cases, a "local version" of this latter criterion is needed to eliminate problematical cases. In fact, during experimental applications of the CoreAligner procedure to the Enterobacteriaceae dataset, we encountered such a case where an apparent genomic island was included in the core structure (Additional file 8; see also Discussion). To eliminate such regions, we first identified locally sparse regions on each genome by finding a maximal scoring segment with a scoring system of absence = +1 and presence = -1, and if this score exceeded a certain cutoff point (here we used 20) in at least one genome, the resulting region was subjected to the test with the above SP_COVER criterion to determine whether the region should be removed or not.

To find out the path of the next maximum weight, we used a similar strategy to that for finding non-intersecting suboptimal sequence alignments [74]: each vertex of the maximum path is marked as deleted and assigned a bad score (-∞), and all of its descents are once removed from TP. Step 5 is repeated and the scores of the removed nodes are recalculated by DP and TP is reconstructed to find the next maximum path. The procedure is repeated until no (undeleted) vertex remains.

Step 6: Construction of an alignment from the paths of maximum weight

The set of paths extracted in the previous step is actually a triplet graph, which should be converted back to the original graph. This conversion can be done straightforwardly: for example, a path of 1:2-2:3 can be simply converted into 1-2-3. However, an interesting situation arises when an OG contains some inparalogous lineages, as in the example in Figure 10C, which may cause multiple appearances of the same node in the alignment path. Even in such a case, a genuine ortholog can typically be found among the inparalogs by examining the context of the alignment path (nodes 2.1 and 2.2 in Figure 10C3). To solve this problem, CoreAligner scores each gene according to the matching of the local context around it, and takes the best-scoring gene as a genuine ortholog. Here, the weight of the gene, g0 [set membership] F0, is defined as g1F11/DistG(g0,g1)DistC(F0,F1), where DistG and DistC are the distances along the genome, G, that contains g0 and g1 and the consensus alignment, C, respectively, and the summation is taken over all g1 [set membership] F1 such that DistG(g0, g1) ≤ MAX_GAP and DistC(F0, F1) ≤ MAX_GAP.

Identification of orthologs between Bacillaceae and Enterobacteriaceae

To examine the correspondence between the core gene sets of Bacillaceae and Enterobacteriaceae, we generated the OGs of the combined dataset of these two families by the DomClust program. Each OG of an individual family, say FB of Bacillaceae, is considered to correspond to an OG of the combined dataset, say FC, if more than half of the members of FB are included in FC. Then, we considered that two OGs of Bacillaceae and Enterobacteriaceae, say FBand FE, respectively, correspond to each other if both FB and FE correspond to the same OG of the combined dataset, say FC.

Essential gene analysis

The sets of B. subtilis essential genes (271 genes) [32] and E. coli essential genes (300 genes) [33] were taken from the original papers. Three genes (yabQ, yafF, yibJ) were eliminated from the E. coli set, since those ORFs are treated as pseudogenes in the current RefSeq database. For the E. coli essential gene set, we also referred to the essential gene set of Kato et al. (302 genes) [35] obtained from the PEC database [75]. By taking the intersection of these two data sets, we obtained a more rigorous essential gene set containing 261 genes.

G+C content of the third codon positions (GC3)

For the calculation of the GC3 values, we used only genes comprising more than 100 codons. We also eliminated from the dataset putative highly expressed (PHX) genes that have specifically biased codon usage patterns. Here, we used a simplified version of the previously proposed procedure to define the PHX genes [43]: a gene, g, is considered to be a PHX gene if the predicted expression level of g defined as ERP (g) = B(g|All)/B(g|RP) exceeds 1.05, where B(g|G) is the codon usage difference of g relative to the given gene set, G, according to Karlin and Mrázek [43], and All and RP denote the sets of all genes and ribosomal proteins in a given genome, respectively. This procedure eliminated around 150–300 genes for each genome in our dataset as PHX genes.

Phylogenetic analysis

To simplify the phylogenetic analysis, we used only OGs that have a one-to-one correspondence (i.e., those containing neither duplication nor domain fusion/fission events). For each OG, a multiple sequence alignment was generated by CLUSTALW [76], and from that alignment the conserved alignment blocks suitable for phylogenetic analysis were extracted by the Gblocks program [77]. In order to create the phylogenetic trees of the core structure, we constructed a concatenated sequence alignment of the universally conserved one-to-one core OGs, and created a neighbor joining tree [44] using the CLUSTALW program and a maximum likelihood tree using the MOLPHY program [45] under the JTT model [78]. In addition, we created a phylogenetic network using the Neighbor-Net method [47] implemented in the SplitsTree program [48].

We also conducted phylogenetic analyses for individual core genes; here, maximum likelihood tree construction and the Shimodaira-Hasegawa test were performed using the TREE-PUZZLE program [79] under the JTT model. In this test, the relationships among the closely related species shown in Table Table11 were fixed, and all the remaining possible topologies (maximally 945 topologies among the 7 taxa) were generated and tested. Here, we considered the ML topology of the concatenated core sequences (Figure (Figure8A),8A), or an appropriate subtree of it when considering a non-universal OG, as a representative genomic tree, and compared it with the ML topology of the individual OG.

Statistical analyses, including classical multidimensional scaling and Fisher's exact test, were performed using the cmdscale and fisher.test commands in the R package. The Robinson-Foulds topological distances [49] were calculated using the treedist command in the PHYLIP package [80]. For simplicity, we used the value of the resulting symmetric difference (which is always an even number) divided by 2.

Abbreviations

OG: orthologous group; HGT: horizontal gene transfer; DP: dynamic programming; ORF: open reading frame; GC3: G+C content of the third codon positions; NJ: neighbor joining; ML: maximum likelihood; MDS: multidimensional scaling; SH test: Shimodaira-Hasegawa test; MBGD: Microbial Genome Database for Comparative Analysis; MST: minimum spanning tree; DAG: directed acyclic graph; PHX gene: putative highly expressed gene.

Authors' contributions

IU carried out every substantial work in this study and approved the final manuscript.

Supplementary Material

Additional file 1:

Pairwise comparisons between the organisms used in this study.

Additional file 2:

Complete figures of the core genome alignments.

Additional file 3:

Detailed lists of the structural core gene sets.

Additional file 4:

Essential genes identified in the B. subtilis and E.coli genomes.

Additional file 5:

Global metabolic map displaying the common core genes shared between Bacillaceae and Enterobacteriaceae drawn by the KEGG Atlas system.

Additional file 6:

Means and standard deviations of the GC3(%) values in each class.

Additional file 7:

Proportions of genes with significantly deviated GC3 values in each class.

Additional file 8:

A problematical case found during an experimental core structure extraction from the Enterobacteriaceae dataset.

Acknowledgements

The author would like to thank Hideto Takami for the initial discussion about the Bacillaceae core gene set, and Toshio Higuchi for his help with the data preparation. The author would also express his gratitude to Nicolas Sierro and Kenta Nakai for their helpful discussion and Ichizo Kobayashi and Mikihiko Kawai for their helpful comments upon reading the manuscript. This work was supported by Institute for Bioinformatics Research Development, Japan Science Technology Agency (BIRD-JST), and by a Grant-in-Aid for Scientific Research (B) from Japan Society for the Promotion of Science.

References

  • Jain R, Rivera MC, Lake JA. Horizontal gene transfer among genomes: the complexity hypothesis. Proc Natl Acad Sci USA. 1999;96:3801–3806. doi: 10.1073/pnas.96.7.3801. [PMC free article] [PubMed] [Cross Ref]
  • Nelson KE, Clayton RA, Gill SR, Gwinn ML, Dodson RJ, Haft DH, Hickey EK, Peterson JD, Nelson WC, Ketchum KA, et al. Evidence for lateral gene transfer between Archaea and bacteria from genome sequence of Thermotoga maritima. Nature. 1999;399:323–329. doi: 10.1038/20601. [PubMed] [Cross Ref]
  • Ochman H, Lawrence JG, Groisman EA. Lateral gene transfer and the nature of bacterial innovation. Nature. 2000;405:299–304. doi: 10.1038/35012500. [PubMed] [Cross Ref]
  • Koonin EV, Makarova KS, Aravind L. Horizontal gene transfer in prokaryotes: quantification and classification. Annu Rev Microbiol. 2001;55:709–742. doi: 10.1146/annurev.micro.55.1.709. [PubMed] [Cross Ref]
  • Brown JR. Ancient horizontal gene transfer. Nat Rev Genet. 2003;4:121–132. doi: 10.1038/nrg1000. [PubMed] [Cross Ref]
  • Boucher Y, Douady CJ, Papke RT, Walsh DA, Boudreau ME, Nesbo CL, Case RJ, Doolittle WF. Lateral gene transfer and the origins of prokaryotic groups. Annu Rev Genet. 2003;37:283–328. doi: 10.1146/annurev.genet.37.050503.084247. [PubMed] [Cross Ref]
  • Doolittle WF. Phylogenetic classification and the universal tree. Science. 1999;284:2124–2129. doi: 10.1126/science.284.5423.2124. [PubMed] [Cross Ref]
  • Gogarten JP, Doolittle WF, Lawrence JG. Prokaryotic evolution in light of gene transfer. Mol Biol Evol. 2002;19:2226–2238. [PubMed]
  • de la Cruz F, Davies J. Horizontal gene transfer and the origin of species: lessons from bacteria. Trends Microbiol. 2000;8:128–133. doi: 10.1016/S0966-842X(00)01703-0. [PubMed] [Cross Ref]
  • Harris JK, Kelley ST, Spiegelman GB, Pace NR. The genetic core of the universal ancestor. Genome Res. 2003;13:407–412. doi: 10.1101/gr.652803. [PMC free article] [PubMed] [Cross Ref]
  • Philippe H, Douady CJ. Horizontal gene transfer and phylogenetics. Curr Opin Microbiol. 2003;6:498–505. doi: 10.1016/j.mib.2003.09.008. [PubMed] [Cross Ref]
  • Bapteste E, Boucher Y, Leigh J, Doolittle WF. Phylogenetic reconstruction and lateral gene transfer. Trends Microbiol. 2004;12:406–411. doi: 10.1016/j.tim.2004.07.002. [PubMed] [Cross Ref]
  • Hacker J, Carniel E. Ecological fitness, genomic islands and bacterial pathogenicity. A Darwinian view of the evolution of microbes. EMBO Rep. 2001;2:376–381. [PMC free article] [PubMed]
  • Uchiyama I. MBGD: a platform for microbial comparative genomics based on the automated construction of orthologous groups. Nucleic Acids Res. 2007:D343–346. doi: 10.1093/nar/gkl978. [PMC free article] [PubMed] [Cross Ref]
  • Liolios K, Mavromatis K, Tavernarakis N, Kyrpides NC. The Genomes On Line Database (GOLD) in 2007: status of genomic and metagenomic projects and their associated metadata. Nucleic Acids Res. 2008:D475–479. [PMC free article] [PubMed]
  • Tettelin H, Masignani V, Cieslewicz MJ, Donati C, Medini D, Ward NL, Angiuoli SV, Crabtree J, Jones AL, Durkin AS, et al. Genome analysis of multiple pathogenic isolates of Streptococcus agalactiae: implications for the microbial "pan-genome". Proc Natl Acad Sci USA. 2005;102:13950–13955. doi: 10.1073/pnas.0506758102. [PMC free article] [PubMed] [Cross Ref]
  • Medini D, Donati C, Tettelin H, Masignani V, Rappuoli R. The microbial pan-genome. Current opinion in genetics & development. 2005;15:589–594. doi: 10.1016/j.gde.2005.09.006. [PubMed] [Cross Ref]
  • Lawrence JG, Hendrickson H. Genome evolution in bacteria: order beneath chaos. Curr Opin Microbiol. 2005;8:572–578. doi: 10.1016/j.mib.2005.08.005. [PubMed] [Cross Ref]
  • Lefébure T, Stanhope MJ. Evolution of the core and pan-genome of Streptococcus: positive selection, recombination, and genome composition. Genome Biol. 2007;8:R71. doi: 10.1186/gb-2007-8-5-r71. [PMC free article] [PubMed] [Cross Ref]
  • Makarova KS, Aravind L, Galperin MY, Grishin NV, Tatusov RL, Wolf YI, Koonin EV. Comparative genomics of the Archaea (Euryarchaeota): evolution of conserved protein families, the stable core, and the variable shell. Genome Res. 1999;9:608–628. [PubMed]
  • Koonin EV. Comparative genomics, minimal gene-sets and the last universal common ancestor. Nat Rev Microbiol. 2003;1:127–136. doi: 10.1038/nrmicro751. [PubMed] [Cross Ref]
  • Charlebois RL, Doolittle WF. Computing prokaryotic gene ubiquity: rescuing the core from extinction. Genome Res. 2004;14:2469–2477. doi: 10.1101/gr.3024704. [PMC free article] [PubMed] [Cross Ref]
  • Remm M, Storm CE, Sonnhammer EL. Automatic clustering of orthologs and in-paralogs from pairwise species comparisons. J Mol Biol. 2001;314:1041–1052. doi: 10.1006/jmbi.2000.5197. [PubMed] [Cross Ref]
  • Uchiyama I. Hierarchical clustering algorithm for comprehensive orthologous-domain classification in multiple genomes. Nucleic Acids Res. 2006;34:647–658. doi: 10.1093/nar/gkj448. [PMC free article] [PubMed] [Cross Ref]
  • Li L, Stoeckert CJ, Jr, Roos DS. OrthoMCL: identification of ortholog groups for eukaryotic genomes. Genome Res. 2003;13:2178–2189. doi: 10.1101/gr.1224503. [PMC free article] [PubMed] [Cross Ref]
  • Tatusov RL, Fedorova ND, Jackson JD, Jacobs AR, Kiryutin B, Koonin EV, Krylov DM, Mazumder R, Mekhedov SL, Nikolskaya AN, et al. The COG database: an updated version includes eukaryotes. BMC Bioinformatics. 2003;4:41. doi: 10.1186/1471-2105-4-41. [PMC free article] [PubMed] [Cross Ref]
  • Rogozin IB, Makarova KS, Murvai J, Czabarka E, Wolf YI, Tatusov RL, Szekely LA, Koonin EV. Connected gene neighborhoods in prokaryotic genomes. Nucleic Acids Res. 2002;30:2212–2223. doi: 10.1093/nar/30.10.2212. [PMC free article] [PubMed] [Cross Ref]
  • Lathe WC, 3rd, Snel B, Bork P. Gene context conservation of a higher order than operons. Trends Biochem Sci. 2000;25:474–479. doi: 10.1016/S0968-0004(00)01663-7. [PubMed] [Cross Ref]
  • Toh H, Weiss BL, Perkin SA, Yamashita A, Oshima K, Hattori M, Aksoy S. Massive genome erosion and functional adaptations provide insights into the symbiotic lifestyle of Sodalis glossinidius in the tsetse host. Genome Res. 2006;16:149–156. doi: 10.1101/gr.4106106. [PMC free article] [PubMed] [Cross Ref]
  • Tillier ER, Collins RA. Genome rearrangement by replication-directed translocation. Nat Genet. 2000;26:195–197. doi: 10.1038/79918. [PubMed] [Cross Ref]
  • Kanehisa M, Araki M, Goto S, Hattori M, Hirakawa M, Itoh M, Katayama T, Kawashima S, Okuda S, Tokimatsu T, et al. KEGG for linking genomes to life and the environment. Nucleic Acids Res. 2008:D480–484. [PMC free article] [PubMed]
  • Kobayashi K, Ehrlich SD, Albertini A, Amati G, Andersen KK, Arnaud M, Asai K, Ashikaga S, Aymerich S, Bessieres P, et al. Essential Bacillus subtilis genes. Proc Natl Acad Sci USA. 2003;100:4678–4683. doi: 10.1073/pnas.0730515100. [PMC free article] [PubMed] [Cross Ref]
  • Baba T, Ara T, Hasegawa M, Takai Y, Okumura Y, Baba M, Datsenko KA, Tomita M, Wanner BL, Mori H. Construction of Escherichia coli K-12 in-frame, single-gene knockout mutants: the Keio collection. Molecular systems biology. 2006;2:2006 0008. doi: 10.1038/msb4100050. [PMC free article] [PubMed] [Cross Ref]
  • Takami H, Takaki Y, Chee GJ, Nishi S, Shimamura S, Suzuki H, Matsui S, Uchiyama I. Thermoadaptation trait revealed by the genome sequence of thermophilic Geobacillus kaustophilus. Nucleic Acids Res. 2004;32:6292–6303. doi: 10.1093/nar/gkh970. [PMC free article] [PubMed] [Cross Ref]
  • Kato J, Hashimoto M. Construction of consecutive deletions of the Escherichia coli chromosome. Molecular systems biology. 2007;3:132. doi: 10.1038/msb4100174. [PMC free article] [PubMed] [Cross Ref]
  • Nakamura Y, Itoh T, Matsuda H, Gojobori T. Biased biological functions of horizontally transferred genes in prokaryotic genomes. Nat Genet. 2004;36:760–766. doi: 10.1038/ng1381. [PubMed] [Cross Ref]
  • Karlin S. Detecting anomalous gene clusters and pathogenicity islands in diverse bacterial genomes. Trends Microbiol. 2001;9:335–343. doi: 10.1016/S0966-842X(01)02079-0. [PubMed] [Cross Ref]
  • Lawrence JG, Ochman H. Molecular archaeology of the Escherichia coli genome. Proc Natl Acad Sci USA. 1998;95:9413–9417. doi: 10.1073/pnas.95.16.9413. [PMC free article] [PubMed] [Cross Ref]
  • Mrázek J, Karlin S. Detecting alien genes in bacterial genomes. Ann N Y Acad Sci. 1999;870:314–329. doi: 10.1111/j.1749-6632.1999.tb08893.x. [PubMed] [Cross Ref]
  • Sandberg R, Winberg G, Branden CI, Kaske A, Ernberg I, Coster J. Capturing whole-genome characteristics in short sequences using a naive Bayesian classifier. Genome Res. 2001;11:1404–1409. doi: 10.1101/gr.186401. [PMC free article] [PubMed] [Cross Ref]
  • Lawrence JG, Ochman H. Amelioration of bacterial genomes: rates of change and exchange. J Mol Evol. 1997;44:383–397. doi: 10.1007/PL00006158. [PubMed] [Cross Ref]
  • Ikemura T. Codon usage and tRNA content in unicellular and multicellular organisms. Mol Biol Evol. 1985;2:13–34. [PubMed]
  • Karlin S, Mrázek J. Predicted highly expressed genes of diverse prokaryotic genomes. J Bacteriol. 2000;182:5238–5250. doi: 10.1128/JB.182.18.5238-5250.2000. [PMC free article] [PubMed] [Cross Ref]
  • Saitou N, Nei M. The neighbor-joining method: a new method for reconstructing phylogenetic trees. Mol Biol Evol. 1987;4:406–425. [PubMed]
  • Adachi J, Hasegawa M. MOLPHY version 2.3: programs for molecular phylogenetics based on maximum likelihood. Comput Sci Monogr. 1996;28:1–150.
  • Phillips MJ, Delsuc F, Penny D. Genome-scale phylogeny and the detection of systematic biases. Mol Biol Evol. 2004;21:1455–1458. doi: 10.1093/molbev/msh137. [PubMed] [Cross Ref]
  • Bryant D, Moulton V. Neighbor-net: an agglomerative method for the construction of phylogenetic networks. Mol Biol Evol. 2004;21:255–265. doi: 10.1093/molbev/msh018. [PubMed] [Cross Ref]
  • Huson DH, Bryant D. Application of phylogenetic networks in evolutionary studies. Mol Biol Evol. 2006;23:254–267. doi: 10.1093/molbev/msj030. [PubMed] [Cross Ref]
  • Robinson DF, Foulds LR. Comparison of phylogenetic trees. Math Biosci. 1981;53:131–147. doi: 10.1016/0025-5564(81)90043-2. [Cross Ref]
  • Shimodaira H, Hasegawa M. Multiple comparisons of log-likelihoods with applications to phylogenetic inference. Mol Biol Evol. 1999;16:1114–1116.
  • Shimodaira H. An approximately unbiased test of phylogenetic tree selection. Syst Biol. 2002;51:492–508. doi: 10.1080/10635150290069913. [PubMed] [Cross Ref]
  • Mantri Y, Williams KP. Islander: a database of integrative islands in prokaryotic genomes, the associated integrases and their DNA site specificities. Nucleic Acids Res. 2004:D55–58. doi: 10.1093/nar/gkh059. [PMC free article] [PubMed] [Cross Ref]
  • Uchiyama I, Higuchi T, Kobayashi I. CGAT: a comparative genome analysis tool for visualizing alignments in the analysis of complex evolutionary changes between closely related genomes. BMC Bioinformatics. 2006;7:472. doi: 10.1186/1471-2105-7-472. [PMC free article] [PubMed] [Cross Ref]
  • Suerbaum S, Smith JM, Bapumia K, Morelli G, Smith NH, Kunstmann E, Dyrek I, Achtman M. Free recombination within Helicobacter pylori. Proc Natl Acad Sci USA. 1998;95:12619–12624. doi: 10.1073/pnas.95.21.12619. [PMC free article] [PubMed] [Cross Ref]
  • Feil EJ, Holmes EC, Bessen DE, Chan MS, Day NP, Enright MC, Goldstein R, Hood DW, Kalia A, Moore CE, et al. Recombination within natural populations of pathogenic bacteria: short-term empirical estimates and long-term phylogenetic consequences. Proc Natl Acad Sci USA. 2001;98:182–187. doi: 10.1073/pnas.98.1.182. [PMC free article] [PubMed] [Cross Ref]
  • Vulic M, Dionisio F, Taddei F, Radman M. Molecular keys to speciation: DNA polymorphism and the control of genetic exchange in enterobacteria. Proc Natl Acad Sci USA. 1997;94:9763–9767. doi: 10.1073/pnas.94.18.9763. [PMC free article] [PubMed] [Cross Ref]
  • Majewski J, Cohan FM. The effect of mismatch repair and heteroduplex formation on sexual isolation in Bacillus. Genetics. 1998;148:13–18. [PMC free article] [PubMed]
  • Shen P, Huang HV. Homologous recombination in Escherichia coli: dependence on substrate length and homology. Genetics. 1986;112:441–457. [PMC free article] [PubMed]
  • Fujitani Y, Yamamoto K, Kobayashi I. Dependence of frequency of homologous recombination on the homology length. Genetics. 1995;140:797–809. [PMC free article] [PubMed]
  • Denamur E, Lecointre G, Darlu P, Tenaillon O, Acquaviva C, Sayada C, Sunjevaric I, Rothstein R, Elion J, Taddei F, et al. Evolutionary implications of the frequent horizontal transfer of mismatch repair genes. Cell. 2000;103:711–721. doi: 10.1016/S0092-8674(00)00175-6. [PubMed] [Cross Ref]
  • Brudno M, Do CB, Cooper GM, Kim MF, Davydov E, Green ED, Sidow A, Batzoglou S. LAGAN and Multi-LAGAN: efficient tools for large-scale multiple alignment of genomic DNA. Genome Res. 2003;13:721–731. doi: 10.1101/gr.926603. [PMC free article] [PubMed] [Cross Ref]
  • Bray N, Pachter L. MAVID: constrained ancestral alignment of multiple sequences. Genome Res. 2004;14:693–699. doi: 10.1101/gr.1960404. [PMC free article] [PubMed] [Cross Ref]
  • Darling AC, Mau B, Blattner FR, Perna NT. Mauve: multiple alignment of conserved genomic sequence with rearrangements. Genome Res. 2004;14:1394–1403. doi: 10.1101/gr.2289704. [PMC free article] [PubMed] [Cross Ref]
  • Treangen TJ, Messeguer X. M-GCAT: interactively and efficiently constructing large-scale multiple genome comparison frameworks in closely related species. BMC Bioinformatics. 2006;7:433. doi: 10.1186/1471-2105-7-433. [PMC free article] [PubMed] [Cross Ref]
  • Sankoff D, Blanchette M. Multiple genome rearrangement and breakpoint phylogeny. J Comput Biol. 1998;5:555–570. [PubMed]
  • Moret BM, Wyman S, Bader DA, Warnow T, Yan M. A new implementation and detailed study of breakpoint analysis. Pac Symp Biocomput. 2001:583–594. [PubMed]
  • Bourque G, Pevzner PA. Genome-scale evolution: reconstructing gene orders in the ancestral species. Genome Res. 2002;12:26–36. [PMC free article] [PubMed]
  • Wolf YI, Rogozin IB, Kondrashov AS, Koonin EV. Genome alignment, evolution of prokaryotic genome organization, and prediction of gene function using genomic context. Genome Res. 2001;11:356–372. doi: 10.1101/gr.GR-1619R. [PubMed] [Cross Ref]
  • Luc N, Risler JL, Bergeron A, Raffinot M. Gene teams: a new formalization of gene clusters for comparative genomics. Comput Biol Chem. 2003;27:59–67. doi: 10.1016/S1476-9271(02)00097-X. [PubMed] [Cross Ref]
  • Thompson JD, Higgins DG, Gibson TJ. Improved sensitivity of profile searches through the use of sequence weights and gap excision. Comput Appl Biosci. 1994;10:19–29. [PubMed]
  • Ma J, Zhang L, Suh BB, Raney BJ, Burhans RC, Kent WJ, Blanchette M, Haussler D, Miller W. Reconstructing contiguous regions of an ancestral genome. Genome Res. 2006;16:1557–1565. doi: 10.1101/gr.5383506. [PMC free article] [PubMed] [Cross Ref]
  • Uchiyama I. MBGD: microbial genome database for comparative analysis. Nucleic Acids Res. 2003;31:58–62. doi: 10.1093/nar/gkg109. [PMC free article] [PubMed] [Cross Ref]
  • Levy H, Low DW. A contraction algorithm for finding small cycle cutsets. J Algorithms. 1988;9:470–493. doi: 10.1016/0196-6774(88)90013-2. [Cross Ref]
  • Waterman MS, Eggert M. A new algorithm for best subsequence alignments with application to tRNA-rRNA comparisons. J Mol Biol. 1987;197:723–728. doi: 10.1016/0022-2836(87)90478-5. [PubMed] [Cross Ref]
  • Hashimoto M, Ichimura T, Mizoguchi H, Tanaka K, Fujimitsu K, Keyamura K, Ote T, Yamakawa T, Yamazaki Y, Mori H, et al. Cell size and nucleoid organization of engineered Escherichia coli cells with a reduced genome. Mol Microbiol. 2005;55:137–149. doi: 10.1111/j.1365-2958.2004.04386.x. [PubMed] [Cross Ref]
  • Thompson JD, Higgins DG, Gibson TJ. CLUSTAL W: improving the sensitivity of progressive multiple sequence alignment through sequence weighting, position-specific gap penalties and weight matrix choice. Nucleic Acids Res. 1994;22:4673–4680. doi: 10.1093/nar/22.22.4673. [PMC free article] [PubMed] [Cross Ref]
  • Castresana J. Selection of conserved blocks from multiple alignments for their use in phylogenetic analysis. Mol Biol Evol. 2000;17:540–552. [PubMed]
  • Jones DT, Taylor WR, Thornton JM. The rapid generation of mutation data matrices from protein sequences. Comput Appl Biosci. 1992;8:275–282. [PubMed]
  • Schmidt HA, Strimmer K, Vingron M, von Haeseler A. TREE-PUZZLE: maximum likelihood phylogenetic analysis using quartets and parallel computing. Bioinformatics. 2002;18:502–504. doi: 10.1093/bioinformatics/18.3.502. [PubMed] [Cross Ref]
  • PHYLIP (Phylogenetic Inference Package) version 3.6 http://evolution.genetics.washington.edu/phylip.html

Articles from BMC Genomics are provided here courtesy of BioMed Central
PubReader format: click here to try

Formats:

Related citations in PubMed

See reviews...See all...

Cited by other articles in PMC

See all...

Links

Recent Activity

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

See more...