• We are sorry, but NCBI web applications do not support your browser and may not function properly. More information
Logo of biotbiofuelBioMed CentralBiomed Central Web Sitesearchsubmit a manuscriptregisterthis articleBiotechnology for Biofuels
Biotechnol Biofuels. 2008; 1: 15.
Published online Oct 22, 2008. doi:  10.1186/1754-6834-1-15
PMCID: PMC2577630

Analysis of saccharification in Brachypodium distachyon stems under mild conditions of hydrolysis

Abstract

Background

Brachypodium distachyon constitutes an excellent model species for grasses. It is a small, easily propagated, temperate grass with a rapid life cycle and a small genome. It is a self-fertile plant that can be transformed with high efficiency using Agrobacteria and callus derived from immature embryos. In addition, considerable genetic and genomic resources are becoming available for this species in the form of mapping populations, large expressed sequence tag collections, T-DNA insertion lines and, in the near future, the complete genome sequence. The development of Brachypodium as a model species is of particular value in the areas of cell wall and biomass research, where differences between dicots and grasses are greatest. Here we explore the effect of mild conditions of pretreatment and hydrolysis in Brachypodium stem segments as a contribution for the establishment of sensitive screening of the saccharification properties in different genetic materials.

Results

The non-cellulosic monosaccharide composition of Brachypodium is closely related to grasses of agricultural importance and significantly different from the dicot model Arabidopsis thaliana. Diluted acid pretreatment of stem segments produced significant release of sugars and negatively affected the amount of sugars obtained by enzymatic hydrolysis. Monosaccharide and oligosaccharide analysis showed that the hemicellulose fraction is the main target of the enzymatic activity under the modest hydrolytic conditions used in our assays. Scanning electron microscopy analysis of the treated materials showed progressive exposure of fibrils in the stem segments.

Conclusion

Results presented here indicate that under mild conditions cellulose and hemicellulose are hydrolysed to differing extents, with hemicellulose hydrolysis predominating. We anticipate that the sub-optimal conditions for hydrolysis identified here will provide a sensitive assay to detect variations in saccharification among Brachypodium plants, providing a useful analytical tool for identifying plants with alterations in this trait.

Background

Although the contribution of agricultural waste to the generation of transportation fuels has been negligible, in recent years there has been an upsurge of interest in the use of grass straw from agricultural waste as well as dedicated energy crops for the production of biofuels [1]. Since grasses of agricultural importance have complex genomes and growth requirements that make them difficult for use in research at the molecular level, there is a need for model grass species in basic research. This need for grass model species is particularly evident in the area of cell wall research, where dicots and grasses differ substantially in the composition and organisation of the component polymers [2,3]. A growing range of genetic tools and the growth characteristics of Brachypodium distachyon make it potentially a good model for grass research [4,5]. A 4× draft of the genome sequence has been released and an 8× assembly will be available http://www.brachypodium.org[6].

The high costs associated with the three biological steps involved in the conversion of lignocellulose to biofuels (enzyme production, biomass hydrolysis and fermentation of the released sugars) have driven numerous efforts to make the overall biochemical conversion more efficient [7]. These efforts have been directed not only to reduce the costs of enzymes, but also to optimise the configuration of all the steps of the process [8]. Any approach for improving the process of saccharification of lignocellulosic plant biomass requires, or at least will benefit from, a thorough understanding of the structure and biosynthesis of plant cell walls [9]. Using Brachypodium as a model for understanding the characteristics of the grass cell wall involved in the process of saccharification will require a detailed characterisation of the saccharification in this material under different conditions [6].

The conversion of lignocellulose into sugars depends on variables present at different levels of organisation in the cell wall, from the diversity of the glycosidic bonds involved in the synthesis of the wall polymers, to the organisation and the relative abundance of each component [10]. Indeed, alfalfa mutants with altered lignin levels present improved digestibility, and saccharification in maize and sorghum is affected by ferulic acid cross-links [11,12].

Industrial procedures for the conversion of lignocellulose into sugars for fermentation use chopped biomass, in which the structure and consequently the architecture of lignocellulose represent another factor affecting conversion. The development of improved lignocellulose saccharification assays, relevant to industrial considerations, should include materials where tissue structure is intact in order to take in account features of the cell wall that will influence digestibility in 'real-life' conditions.

Here we present a characterisation of the saccharification of Brachypodium stem segments in order to understand the modifications occurring in lignocellulose under different pretreatment and hydrolysis conditions. We have carried out analyses of the composition of Brachypodium stems and the products released, as well as structural changes, occurring in the stem segments under mild conditions of hydrolysis.

Results

Monosaccharide composition of Brachypodium stems

Brachypodium is closely related to agronomically important grasses, making it a potential model species from a phylogenetic point of view [6]. To examine whether Brachypodium relatedness to important crop grasses is maintained at the level of cell wall composition, we compared the monosaccharide composition of stem cell wall from several grass species with that of Arabidopsis, a well-characterised dicot model.

Figure Figure11 shows that the composition of Brachypodium is similar to that of barley, Miscanthus and wheat. On the other hand, the monosaccharide composition of the cell wall from the grasses analysed differ significantly from Arabidopsis. The percentage of arabinose in grasses is, on average, 2.5 times higher than the amount observed in the dicot species. Conversely, the molar percentage representation of galacturonic acid is around four times and rhamnose around five times higher in Arabidopsis than in the grasses. These differences reflect the divergence in polymers constituting the matrix of the cell wall.

Figure 1
Non-cellulosic monosaccharide composition of Brachypodium stems compared with other species. Diverging composition is observed between grasses and Arabidopsis. Results represent the mean (± SD) of three experiments.

Whilst the cell walls of grasses and dicot plants are both largely polysaccharide composites based around a framework of cellulose microfibrils, there are substantial differences between these groups of plants with regard to the composition of the matrix polysaccharides that associate with the cellulose. The primary cell walls of most dicots are relatively rich in pectins, and xyloglucans form the major hemicellulose coating the cellulose microfibrils. In contrast, the primary cell walls of grasses have much less pectin and xyloglucan, and glucuronoarabinoxylan (GAX) and mixed-linkage glucans form the major hemicelluloses [13]. Dicots and grasses also show differences in the composition of secondary cell walls. The hemicellulose of dicot secondary cell walls is typically dominated by simple arabinoxylans with only occasional side chains [14]. In contrast, the GAX of grass secondary cell walls has more complex and numerous side chains, and the arabinosyl side chains may serve as connections to lignin through feruloyl esters [1,14].

The cell walls of dicot species such as Arabidopsis are generally much richer in pectic components such as homogalacturonan and rhamnogalacturonan than are grasses, and this is clearly apparent in the higher levels of galacturonic acid released from Arabidopsis cell walls. The similarities in non-cellulosic monosaccharide composition between Brachypodium and commercially important grasses lend support to the use of Brachypodium as a model to explore the conversion of lignocellulose from grasses into ethanol.

Effect of H2SO4 concentration and temperature during pretreatment on the hydrolysis of Brachypodium stem segments

Many studies have shown the need for pretreatment of the lignocellulosic material in order to produce an efficient hydrolysis [15]. Here we studied different conditions of diluted acid pretreatment in the release of sugars from Brachypodium stem segments.

Increasing concentrations of H2SO4 up to 2% at 90°C increased the release of sugars in Brachypodium stems. Acid pretreatment above these concentrations did not result in increased sugars production after hydrolysis. Conversely, acid pretreatment of paper (used here as a de-lignified control) only marginally increased the release of sugars after hydrolysis, and concentrations of sulphuric acid above 1% did not increase saccharification in paper (Figure (Figure2).2). The pretreatment of Brachypodium segments with 4% H2SO4 resulted in a lower production of sugars from stem segments after enzymatic hydrolysis, suggesting that a certain proportion of the polysaccharides accessible to the enzymes are released by the acid during the pretreatment (Figure (Figure22).

Figure 2
Sugar release from Brachypodium stems and paper using increasing concentrations of H2SO4. Brachypodium stems and paper discs were pretreated at 90°C in the presence of acid concentration shown in the graph, and subsequently subjected to enzymatic ...

Further effects of different pretreatment conditions were studied, combining increasing temperatures with H2SO4. The release of sugars by enzymatic hydrolysis remained unaltered in the absence of H2SO4, irrespective of increase in the temperature (up to 130°C) (Figure (Figure3A).3A). The efficiency of the enzymatic saccharification increased following pretreatment with H2SO4 at all temperatures, but we found that temperature and H2SO4 concentration generally interact in a cooperative way leading to increased enzymatic saccharification. However, pretreatment at 130°C in the presence of H2SO4 led to a lower sugar release on cellulase treatment than that seen at lower temperatures. As shown in Figure Figure22 for H2SO4 concentration above 4% at 90°C, this decrease in the efficiency in the release of sugars is probably due to chemical hydrolysis produced by the combination of high acid concentration and high temperature. Indeed, the sugars present in the media of the pretreatment show a drastic increase when the H2SO4 concentrations and temperature increase (Figure (Figure3B).3B). Hemicellulose hydrolysis has been reported in corn stover under diluted acid conditions and slightly higher temperatures [16]. Under the mild hydrolysis conditions used in the present work, the release of sugars produced during the acid pretreatment limits the availability of substrates for the subsequent enzymatic action. Alternatively, hot acid treatments can lead to the formation of inhibitors of enzyme action and thereby reduce sugar release [17]. In our experiments, this explanation seems unlikely as the segments are rinsed after acid treatment prior to adding the enzymes.

Figure 3
Sugar production from Brachypodium stems pretreated at different temperatures and acid concentrations. (A) Sugars released after enzymatic treatment of the stem segments. (B) Sugars present in the pretreatment media before enzymatic hydrolysis. Results ...

The effect of different pretreatment conditions in the structure of the Brachypodium stem segments was observed using scanning electron microscopy (SEM). Figure Figure44 shows sections obtained by splitting the segments longitudinally, in order to observe the vascular elements and epidermis after pretreatment and subsequent enzymatic hydrolysis. Pretreatment at 90°C with or without enzymatic hydrolysis shows no discernable change in the structure of the vascular tissue. After enzymatic treatment the tissue appears slightly disorganised, but no major effect is observed (Figure (Figure4).4). The pretreatment with 2% H2SO4 at 90°C also shows no obvious changes in the structure of the tissue, but following subsequent enzymatic hydrolysis there are clear changes in structure with thinner and 'flaky' walls apparent in the longitudinal sections. The longitudinal sections show clear alterations when pretreated at 130°C, even in the absence of H2SO4. When the segments are pretreated at 130°C in the presence of acid, fibrous material is exposed in the surface of the material (Figure (Figure4).4). Similar exposure of fibrous cell wall material has been shown in barley hull, particularly at the level of epidermis [18].

Figure 4
Scanning electron microscopy showing the effect of different saccharification condition in Brachypodium stems. Images of untreated (A), pretreated only (B, D, F, and H) and pretreated and digested stems (C, E, G, and I). Images B to E show pretreatment ...

Analysis of sugars released during pretreatment at different temperatures

In order to study the effect of mild pretreatment with dilute acid, we studied the composition of sugars released after 20 minutes of pretreatment with and without acid and at different temperatures. Figure Figure55 shows that xylose is the major monosaccharide released during pretreatment without H2SO4 acid. Small amounts of glucose were also released. Increasing temperature led to increased amounts of xylose and glucose being released, but no other detectable sugars appeared (Figure (Figure5A).5A). When the stem segments were pretreated in the presence of 1% H2SO4 at 4°C, the predominant sugar detected was xylose with traces of glucose and mannose (Figure (Figure5B).5B). Increasing temperature in the presence of H2SO4 led to an increase in the release of xylose, mannose and glucose, with arabinose also present in the pretreatment media. Many studies show hemicellulose hydrolysis produced by diluted acid treatment [19,20]. These results suggest that acid pretreatment at high temperatures induces the breakdown of hemicellulose in Brachypodium segments, mainly glucuronooarabinoxylans.

Figure 5
Analysis of monosaccharides present in the pretreatment media. Brachypodium stem segments were incubated at 4, 30, 60, and 90°C without (A) and with 1% H2SO4 (B) and the sugars released during pretreatment analysed using a Dionex system (see Methods ...

Standard conditions of hydrolysis and effect on Brachypodium stems

The saccharification of Brachypodium stems was compared with the digestion of paper in order to compare the dynamics of sugar release from cellulosic and lignocellulosic materials. An increasing amount of enzyme progressively increased the release of sugars in paper (Figure (Figure6),6), showing that no structural barriers limit the enzymatic activity in this case. In contrast, in Brachypodium stems, the release of sugars increased with increasing enzyme load, to 12 filter paper units (FPU)/g and then stabilised (Figure (Figure6),6), suggesting that access to substrates is more limited than is the case with paper.

Figure 6
Effect of increasing amount of enzymes in the digestion of Brachypodium stem segments and paper discs. Paper discs and plant material were pretreated at 90°C with 1% H2SO4 for 20 min and subsequently hydrolysed with increasing amounts of enzyme. ...

One of the major aims of the work presented here is to establish conditions for use in high-throughput screens to enable the identification of alterations in saccharification potential in mutant populations. In contrast to industrial processing where maximum release of sugars is desirable, we wish to identify mild pretreatment conditions that allow the enzymes to release limited quantities of sugar from wild type stems and will enable changes in the ease of sugar mobilisation with enzymes in potential mutants to be detected. In a typical digestion we pretreat 4 mm whole stem segments with 1% H2SO4 at 90°C for 20 min. Subsequent digestion of the pretreated material is carried out for 1 h at 30°C, using an enzyme cocktail containing 4 FPU and 19 cellobiose units (CBU) (see Methods for details) per gram of material. Under these conditions, an average of 75% of the total sugars in the material remained undigested in the stems following pretreatment and enzyme hydrolysis, whilst 90% remained following enzyme hydrolysis without pretreatment (Figure (Figure7).7). SEM imaging showed minor structural alterations of the Brachypodium stems following hydrolysis (Figure (Figure44).

Figure 7
Total sugars remaining in stem segments after pretreatment and hydrolysis. Segments were subjected to complete hydrolysis after pretreatment only (1% H2SO4, 20 min at 90°C) or pretreatment and enzymatic hydrolysis (4 FPU/g of material). Total ...

Time course of hydrolysis and products released during enzymatic digestion

Using an enzyme concentration 4 FPU/g of Brachypodium stems, the enzymatic hydrolysis proceeded at maximum rate over the first 4 h, after which the rate declined (Figure (Figure8).8). A similar trend was seen with paper used as a substrate.

Figure 8
Time course of hydrolysis. Paper discs and stem segments were pretreated (1% H2SO4, 20 min at 90°C) and then incubated with a cellulase mixture (4 FPU/g of material) over a period of 24 h. Sugars were quantified as described in Methods. Results ...

Analyses of the products released during 24 h digestion revealed a gradual accumulation of monosaccharides, whilst oligosaccharide species were relatively abundant early in the digestion but disappear with time (Figure (Figure9).9). The digestion products from paper were dominated by glucose and cello-oligomers, whereas in the digestion products from Brachypodium, xylose and xylo-oligosaccharides predominated over gluco- and cello-oligosaccharides. This most likely reflects the fact that paper has already seen substantial loss of hemicelluloses during the pulping process, and that pulping has also produced cleaner cellulose fibres more readily attacked by cellulases. Although xylose was not detected in the oligosaccharide analysis (Figure (Figure9A),9A), monosaccharide analyses of the digestion products from paper show that xylose is present after enzyme action, but the low amounts released (relative to glucose) do not allow quantification under the analytical conditions of the oligosaccharide analyses (data not shown).

Figure 9
Analysis of the oligosaccharides released by enzymatic digestion of Brachypodium stem segments and papers discs over a 24 h period of incubation. Materials were digested as described for the time course of the incubation (Figure 8 and Methods) At the ...

In contrast, the Brachypodium stems have only been exposed to the gentle pretreatment conditions used in our assay and hence the more readily digestible hemicellulose components are releasing greater quantities of sugar than the more recalcitrant cellulose (Figure (Figure9B).9B). Saccharification analysis of dilute H2SO4-impregnated wheat straw produced large amounts of xylose after pretreatment in enzymatic hydrolysis [21]. Since some of the main candidate energy crops are grasses, high levels of xylose are expected to be released for fermentation, underlying the need for pentose-fermenting organisms in the production of liquid biofuels [22].

Conclusion

Brachypodium is being considered as a suitable experimental model species to investigate various parameters related to the use of fast-growing biomass grasses in the context of biofuels and bioenergy [3,6]. Work presented in this paper shows that the composition of non-cellulosic polysaccharides in Brachypodium appears broadly similar to that of biomass grasses and cereals, and that all of these differ to that seen in Arabidopsis, indicating that from a perspective of cell wall composition Brachypodium appears to be a suitable model. In order to underpin the development of high-throughput saccharification screens that can be used to identify Brachypodium mutants with altered digestibility characteristics, we have undertaken an examination into the effects of a range of pretreatment and enzymatic hydrolysis conditions. Dilute acid pretreatment has been shown to be an efficient method of increasing efficiency in the digestion of lignocellulosic materials in general. Here we show the effect of particular combinations of pretreatment and enzymatic hydrolysis in the saccharification of Brachypodium stems.

We found that both pretreatment temperature and acid concentration had effects on subsequent enzymatic saccharification. Temperatures above 110°C combined with acid in the pretreatment led to hydrolysis of cell wall polysaccharides directly, decreasing the amount of sugars released by subsequent enzymatic hydrolysis. The monosaccharide composition of the sugars released during pretreatment corresponds to hemicellulosic materials. SEM images of the segments after pretreatment and enzymatic attack revealed changes in stem structure associated with changes in sugar release. Our data support the use of Brachypodium as a model species for studying lignocellulose from cereals and biomass grasses, and suggest a combination of modest temperature and dilute acid pretreatment may form the basis of a sensitive screening method to identify genes affecting grass biomass saccharification potential.

Methods

Plant materials and growth conditions

Seed of Brachypodium distachyon Bd21 were sown in 4-inch pots, watered, and kept at 4°C for two weeks prior to growth. Plants were grown in a glasshouse under a 16-hours light regime, at 22°C. After setting seed, plants were left to dry in the pots. For studying saccharification, stem segments of 4 mm length were taken from the middle section of internodes 5, 6, and 7. Preliminary studies showed that there were no differences in saccharification using material taken from these internodes. In all the saccharification assays 4 mg samples were used and assays were carried out in quadruplicates. In the case of paper used for comparative purposes with Brachypodium stems, samples were 4 mg of 5 mm discs of 80 g/m2 recycled paper (M-Real, Amsterdam, The Netherlands).

Hydrolysis of materials

Enzymatic hydrolysis was carried out using Celluclast (cellulase from Trichoderma reesei) and Novozyme 188 (cellobiase from Aspergillus niger) in an enzyme cocktail containing a 4:1 proportion of Celluclast: Novozyme 188. The enzymes were filtered using a Hi-Trap desalting column (GE Healthcare, Little Chalfont, UK) before use and the hydrolysis was carried out during the indicated times, at 30°C in buffer Na Acetate 25 mM at pH 4.5.

Total sugar content

The determination of total sugar content in untreated, pretreated, and no pretreatment stems was carried out following the protocol described by Fry [23]. 4 mg of stem fragments were dissolved in 72% H2SO4 at 30°C and then hydrolysed in 4% H2SO4 at 120°C for 1 h. The resulting solution was neutralised with Ba(OH)2 and the sugars were measured as described below in sugar determination.

Scanning electro microscopy

Stems were incubated in buffer Na Acetate 25 mM pH 4.5 for 20 min at room temperature (untreated and no pretreatment), or incubated in 1% H2SO4 for 20 min at 90°C (pretreated). The segments were rinsed several times with buffer and then incubated with 0 or 0.5 mg of enzyme cocktail for 1 h. Segments were placed in 100% ethanol and then air-dried. For SEM, stems were mounted in SEM stubs and coated with gold/palladium. The mounted specimens were observed with a JEOL JSM 6490LV (Jeol Ltd, Tokyo, Japan) at an accelerating voltage of 5kV.

Sugar determination

The determination of sugars released after hydrolysis was done using a modification of the method by Anton and Barrett [24] using 3-methyl-2-benzothiazolinone hydrozone (MTBH). Determination was carried out in a 1 ml final volume using 300 μl of sample. The detection reaction contained 0.25 N NaOH, 0.06% MTBH, 0.02% DTT, and colour was developed by adding 0.2% FeNH4(SO4)2, 0.2% Sulfamic acid and 0.1% HCl. The absorbance of the reaction was followed at 620 nm. This method was tested for the detection of a range of sugars that are released from the cell wall, showing no significant differences between reducing sugars.

Sugar analysis

Oligosaccharide analyses of the sugars released from stem segments after hydrolysis was carried out by taking 0.2 ml samples from digestions after 0.5, 1, 3, 4, 5, 12, and 24 h of enzymatic digestion. Samples were filtered using AG50W × 12 resin (Bio-Rad Laboratories Ltd, Hemel Hempstead, UK) and subsequently dried and re-suspended in 100 μl of deionised water. The samples were filtered using a Millex LH 0.45 μm pored filter (Millipore, Billerica, USA) and then separated by high-performance anion-exchange chromatography (HPAEC) on a Dionex Carbopac PA-100 column (Dionex Corporation, Sunnyvale, USA) with integrated amperometry detection. The separated oligosaccharides were quantified by using external calibration with an equimolar mixture of eleven monosaccharide and oligosaccharide standards (glucose, cellobiose, cellotriose, cellotetraose, cellopentaose, cellohexaose, xylose, xylobiose, xylotriose, xylotetraose, and xylopentaose).

Cell walls for non-cellulosic sugar composition from grasses and Arabidopsis were extracted from mature stems. Tissue was subsequently extracted with phenol, chlorophorm:methanol 4:1, 90% DMSO and 100% ethanol. 4 mg of dried material was digested with 2 M trifluoroacetic acid at 100°C for 4 h. After the acid was evaporated, samples were rinsed with isopropanol and resuspended in 100 μl of deionised water. Samples were filtered and analysed as described below.

For the determination of sugars during pretreatment, samples were taken after 20 min of pretreatment in the presence of 0 and 1% H2SO4at 4, 30, 60 and 90°C. Monosaccharide analyses were performed by HPAEC using a Dionex Carbopac PA-10 as described in [25]. Samples (1.4 ml) were collected immediately after pretreatment and filtered using a column of Dowex 1 × 2 to eliminate the H2SO4 from the samples. The monosaccharide standards used for quantification were arabinose, fucose, galactose, galacturonic acid, glucose, glucuronic acid, mannose, rhamnose, and xylose.

Competing interests

The authors declare that they have no competing interests.

Authors' contributions

LDG carried out the saccharification assays, monosaccharide analysis, preparation of materials, supervised the work in the laboratory and contributed to the manuscript preparation. JKB carried out the oligosaccharide analysis and participated in determining the saccharification conditions. ERS undertook the SEM work and characterisation of pretreatments. SJMM helped in the experimental design, participated in the saccharification analysis, contributed to the manuscript preparation, and obtained funding for the work. All authors read and approved the final manuscript.

Acknowledgements

M Bevan is acknowledged for the supply of Brachypodium seeds; A Viksø-Nielsen for the generous gift of cellulolytic enzymes. We thank D Ashford for support with glycan analysis.

References

  • Gomez LD, Steele-King CG, McQueen-Mason SJ. Sustainable liquid biofuels from biomass: the writing's on the walls. New Phytol. 2008;178:473–485. doi: 10.1111/j.1469-8137.2008.02422.x. [PubMed] [Cross Ref]
  • Carpita NC. Structure and biogenesis of the cell walls of grasses. Annu Rev Plant Physiol Plant Mol Biol. 1996;47:445–476. doi: 10.1146/annurev.arplant.47.1.445. [PubMed] [Cross Ref]
  • Vogel J. Unique aspects of the grass cell wall. Curr Opin Plant Biol. 2008;11:301–307. doi: 10.1016/j.pbi.2008.03.002. [PubMed] [Cross Ref]
  • Ozdemir BS, Hernandez P, Filiz E, Budak H. Brachypodium genomics. Int J Plant Genomics. 2008;2008:536104. [PMC free article] [PubMed]
  • Draper J, Mur LA, Jenkins G, Ghosh-Biswas GC, Bablak P, Hasterok R, Routledge AP. Brachypodium distachyon. A new model system for functional genomics in grasses. Plant Physiol. 2001;127:1539–1555. doi: 10.1104/pp.127.4.1539. [PMC free article] [PubMed] [Cross Ref]
  • Opanowicz M, Vain P, Draper J, Parker D, Doonan JH. Brachypodium distachyon : making hay with a wild grass. Trends Plant Sci. 2008;13:172–177. doi: 10.1016/j.tplants.2008.01.007. [PubMed] [Cross Ref]
  • Himmel ME, Ding SY, Johnson DK, Adney WS, Nimlos MR, Brady JW, Foust TD. Biomass recalcitrance: engineering plants and enzymes for biofuels production. Science. 2007;315:804–807. doi: 10.1126/science.1137016. [PubMed] [Cross Ref]
  • Wingren A, Galbe M, Zacchi G. Techno-economic evaluation of producing ethanol from softwood: comparison of SSF and SHF and identification of bottlenecks. Biotechnol Prog. 2003;19:1109–1117. doi: 10.1021/bp0340180. [PubMed] [Cross Ref]
  • Wyman CE. What is (and is not) vital to advancing cellulosic ethanol. Trends Biotechnol. 2007;25:153–157. doi: 10.1016/j.tibtech.2007.02.009. [PubMed] [Cross Ref]
  • McCann MC, Carpita NC. Designing the deconstruction of plant cell walls. Curr Opin Plant Biol. 2008;11:314–320. doi: 10.1016/j.pbi.2008.04.001. [PubMed] [Cross Ref]
  • Vermerris W, Saballos A, Ejeta G, Mosier NS, Ladisch MR, Carpita NC. Molecular breeding to enhance ethanol production from corn and sorghum stover. Crop Science. 2007;47:S142–S153. doi: 10.2135/cropsci2007.04.0013IPBS. [Cross Ref]
  • Chen F, Dixon RA. Lignin modification improves fermentable sugar yields for biofuel production. Nat Biotechnol. 2007;25:759–761. doi: 10.1038/nbt1316. [PubMed] [Cross Ref]
  • Carpita NC, Defernez M, Findlay K, Wells B, Shoue DA, Catchpole G, Wilson RH, McCann MC. Cell wall architecture of the elongating maize coleoptile. Plant Physiol. 2001;127:551–565. doi: 10.1104/pp.127.2.551. [PMC free article] [PubMed] [Cross Ref]
  • Pauly M, Keegstra K. Cell-wall carbohydrates and their modification as a resource for biofuels. Plant J. 2008;54:559–568. doi: 10.1111/j.1365-313X.2008.03463.x. [PubMed] [Cross Ref]
  • Wyman CE, Dale BE, Elander RT, Holtzapple M, Ladisch MR, Lee YY. Coordinated development of leading biomass pretreatment technologies. Bioresour Technol. 2005;96:1959–1966. doi: 10.1016/j.biortech.2005.01.010. [PubMed] [Cross Ref]
  • Lloyd TA, Wyman CE. Combined sugar yields for dilute sulfuric acid pretreatment of corn stover followed by enzymatic hydrolysis of the remaining solids. Bioresour Technol. 2005;96:1967–1977. doi: 10.1016/j.biortech.2005.01.011. [PubMed] [Cross Ref]
  • Almeida JRM, Modig T, Petersson A, Hahn-Hagerdal B, Liden G, Gorwa-Grauslund MF. Increased tolerance and conversion of inhibitors in lignocellulosic hydrolysates by Saccharomyces cerevisiae. J Chem Technol Biotechnol. 2007;82:340–349. doi: 10.1002/jctb.1676. [Cross Ref]
  • Kim TH, Taylor F, Hicks KB. Bioethanol production from barley hull using SAA (soaking in aqueous ammonia) pretreatment. Bioresour Technol. 2008;99:5694–5702. doi: 10.1016/j.biortech.2007.10.055. [PubMed] [Cross Ref]
  • Nguyen QA, Tucker MP, Keller FA, Eddy FP. Two-stage dilute-acid pretreatment of softwoods. Appl Biochem Biotechnol. 2000;84–86:561–576. doi: 10.1385/ABAB:84-86:1-9:561. [PubMed] [Cross Ref]
  • Kumar R, Wyman CE. The impact of dilute sulfuric acid on the selectivity of xylooligomer depolymerization to monomers. Carbohydr Res. 2008;343:290–300. doi: 10.1016/j.carres.2007.10.022. [PubMed] [Cross Ref]
  • Linde M, Jakobsson EL, Galbe M, Zacchi G. Steam pretreatment of dilute H2SO4-impregnated wheat straw and SSF with low yeast and enzyme loadings for bioethanol production. Biomass Bioenergy. 2008;32:326–332. doi: 10.1016/j.biombioe.2007.09.013. [Cross Ref]
  • Lynd LR, van Zyl WH, McBride JE, Laser M. Consolidated bioprocessing of cellulosic biomass: an update. Curr Opin Biotechnol. 2005;16:577–583. doi: 10.1016/j.copbio.2005.08.009. [PubMed] [Cross Ref]
  • Fry SC. Wall polymers: chemical characterisation. In: Fry SC, editor. The Growing Plant Cell Wall: Chemical and Metabolic Analysis. Caldwell, New Jersey: The Blackburn Press; 1988. pp. 102–185.
  • Anthon GE, Barrett DM. Determination of reducing sugars with 3-methyl-2-benzothiazolinonehydrazone. Anal Biochem. 2002;305:287–289. doi: 10.1006/abio.2002.5644. [PubMed] [Cross Ref]
  • Jones L, Milne JL, Ashford D, McQueen-Mason SJ. Cell wall arabinan is essential for guard cell function. Proc Natl Acad Sci USA. 2003;100:11783–11788. doi: 10.1073/pnas.1832434100. [PMC free article] [PubMed] [Cross Ref]

Articles from Biotechnology for Biofuels are provided here courtesy of BioMed Central

Formats:

Related citations in PubMed

See reviews...See all...

Cited by other articles in PMC

See all...

Links

Recent Activity

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

See more...