• We are sorry, but NCBI web applications do not support your browser and may not function properly. More information
Logo of embojLink to Publisher's site
EMBO J. Apr 15, 2003; 22(8): 1753–1761.
PMCID: PMC154470

A redox-sensitive loop regulates plasminogen activator inhibitor type 2 (PAI-2) polymerization

Abstract

Plasminogen activator inhibitor type 2 (PAI-2) is the only wild-type serpin that polymerizes spontaneously under physiological conditions. We show that PAI-2 loses its ability to polymerize following reduction of thiol groups, suggesting that an intramolecular disulfide bond is essential for the polymerization. A novel disulfide bond was identified between C79 (in the CD-loop) and C161 (at the bottom of helix F). Substitution mutants in which this disulfide bond was broken did not polymerize. Reactive center loop peptide insertion experiments and binding of bis-ANS to hydrophobic cavities indicate that the C79–C161 disulfide bond stabilizes PAI-2 in a polymerogenic conformation with an open A-β-sheet. Elimination of this disulfide bond causes A-β-sheet closure and abrogates the polymerization. The finding that cytosolic PAI-2 is mostly monomeric, whereas PAI-2 in the secretory pathway is prone to polymerize, suggests that the redox status of the cell could regulate PAI-2 polymerization. Taken together, our data suggest that the CD-loop functions as a redox-sensitive switch that converts PAI-2 between an active stable monomeric and a polymerogenic conformation, which is prone to form inactive polymers.

Keywords: PAI-2/polymerization/redox/serpin

Introduction

Plasminogen activator inhibitor type 2 (PAI-2) is a serine protease inhibitor that belongs to the ov-serpin branch of the serpin superfamily. The molecular architecture of PAI-2 (Harrop et al., 1999) resembles that of other serpins (Loebermann et al., 1984; Stein et al., 1990; Baumann et al., 1991): it is built from nine helices (helix A–helix I) and three β-sheets (A–C), and has a mobile reactive center loop (RCL) that is supported by the dominant A-β-sheet (Figure 1). However, PAI-2 has additional features that distinguish it from the other better-studied serpins. PAI-2 has a 33 amino acid insertion that forms a loop between helices C and D. This so-called CD-loop is present only in a few ov-serpins, but in PAI-2 it is unusually long. The CD-loop is encoded by a separate exon (Ye et al., 1989), indicating that it can be a separate functional domain. Another unique feature of PAI-2 is its inefficient secretion signal (Belin et al., 1989; von Heijne et al., 1991), which is part of the mature protein and translocates only a fraction of PAI-2 to the extracellular compartments. The extracellular form of PAI-2 is recognized as an inhibitor of urokinase-type plasminogen activator (uPA), and may therefore be involved in regulating extracellular proteolysis and cell migration (Kruithof et al., 1995). PAI-2 inhibits uPA by the established serpin inhibitory mechanism that involves RCL cleavage and insertion of the RCL into the A-β-sheet, whereby the covalently bound protease is translocated to the opposite pole of the serpin molecule (Lawrence et al., 1995; Wilczynska et al., 1995; Stratikos and Gettins 1997; Fa et al., 2000; Huntington et al., 2000). The function of the predominantly intracellular fraction of PAI-2 is an enigma. A role in protection of cells against apoptosis has been proposed (Kumar and Baglioni, 1991; Dickinson et al., 1995), but so far no intracellular tar get(s) have been identified. PAI-2 can be cross-linked to membranes by tissue transglutaminase (Jensen et al., 1993) and it binds to annexins (Jensen et al., 1996). The anti-apoptotic activity, the interaction with annexins and the cross-linking are all linked to the CD-loop of PAI-2 (Jensen et al., 1993; Dickinson et al., 1995).

figure cdg178f1
Fig. 1. Ribbon model of PAI-2. The model was built with co-ordinates from Brookhaven Protein Data Bank (accession No. 1BY7) using the Insight II program (Biosym. Technologies, San Diego, CA). The cysteines present in the X-ray structure are shown as red ...

Serpin polymerization is the underlying cause of several diseases. In these cases, naturally occurring serpin variants carry mutations that affect the mobility of the RCL and/or the opening of the A-β-sheet, which makes them prone to polymerize. Spontaneous polymerization has been described for natural mutants of α1-antitrypsin, neuroserpin, C1-inhibitor and α1-antichymotrypsin, and it has been linked to diseases as diverse as liver cirrhosis, emphysema, dementia, angioedema or thromboembolism (Stein and Carrell, 1995; Risse et al., 1998).

Most natural wild-type (wt) serpins are stable active monomers under physiological conditions, and polymerization can only be induced by treatment under mild denaturing conditions (Lomas et al., 1992; Patston et al., 1995). However, in that respect, PAI-2 is unique since it is the only wt serpin that spontaneously forms loop–sheet polymers under physiological conditions (Mikus and Ny, 1996). Polymerization of PAI-2 depends on protein concentration, and is linked to reduced secretion efficiency in an expression system designed for efficient secretion through the endoplasmic reticulum (ER) (Mikus and Ny, 1996). It has been proposed that serpin polymerization requires the formation of a polymerogenic intermediate (Dafforn et al., 1999) where the RCL is partially inserted (Mast et al., 1992; Lomas et al., 1993; Fitton et al., 1997), strand 1 of the C-β-sheet is released (Chang et al., 1997) and a gap between strands 3 and 5 of the A-β-sheet is formed. Once such an intermediate is formed, polymerization can take place by the sequential insertion of the RCL from one molecule into the A-β-sheet of another (Lomas et al., 1992; Li et al., 1999). Since PAI-2 spontaneously polymerizes, it is likely that its conformation differs from that of the other wt serpins.

The X-ray structure of a PAI-2 deletion mutant reveals a unique configuration of amino acids at the breach region (located at the top of A-β-sheet), which is not present in other serpins (Harrop et al., 1999). However, our mutational analysis has shown that this configuration is not the reason why PAI-2 spontaneously polymerizes (Wilczynska et al., 2003). In this report, we provide evidence that the polymerogenic conformation of PAI-2 has an open A-β-sheet, which is stabilized by a disulfide bond that connects the CD-loop to the bottom of helix F. Based on these results, we propose that the CD-loop can function as a molecular switch that regulates polymerization of PAI-2 by sensing the redox status of cellular compartments.

Results

The effect of thiol group modifications on the ability of PAI-2 to polymerize

As shown previously (Mikus and Ny, 1996), purified wt PAI-2 spontaneously forms non-covalent loop–sheet polymers under physiological conditions. Consistent with this finding, purified wt PAI-2 that was incubated at 37°C for 16 h appeared mainly as polymers when analyzed by non-denaturing PAGE (Figure 2A, lane 1). However, when this pre-polymerized PAI-2 was reduced with dithiothreitol (DTT) and alkylated, the modified protein (defined as ‘blocked’ PAI-2) appeared as a monomer (Figure 2A, lane 2). Blocked PAI-2 was active and could form a complex with uPA (Figure 2A, lane 3). Even after prolonged incubation under conditions that would lead to polymerization of the native inhibitor (pH 8.0, 37°C), blocked PAI-2 remained as a stable inhibitory active monomer (Figure 2A, lanes 4 and 5). Consistent with the above results, the inhibitory activity of native PAI-2 determined by chromogenic assay decreased by ~70% upon incubation at 37°C for 16 h, whereas the activity of the blocked PAI-2 remained stable under the same conditions (Figure 2B). Taken together, these data suggest that intramolecular disulfide bond(s) may be required to keep PAI-2 in a conformation that has the ability to polymerize spontaneously.

figure cdg178f2
Fig. 2. Influence of alkylation of thiol groups in wt PAI-2 on its polymerization and activity. (A) Polymerization of wt PAI-2 tested by non-denaturing PAGE followed by western blot (each lane contains 2 µg of PAI-2). Lane ...

Identification of cysteine residues that are required for PAI-2 polymerization

PAI-2 exists in two allelic variants that contain either five or six cysteine residues (Bachmann, 1995). So far, only one disulfide bond that connects C5 (located in helix A) and C405 (located in strand 5 of B-β-sheet) (Figure 1) has been defined chemically (unpublished data in Huber and Carrell, 1989) and shown by X-ray structure (Harrop et al., 1999). To identify the disulfide bond(s) that are required to keep PAI-2 in the polymerogenic conformation, we constructed single (C5S, C79S, C145S and C161S) and double (C5S/C79S, C5S/C145S and C5S/C161S) mutants of PAI-2. Similar results were obtained for the single and double mutants; thus only the data for single mutants are shown in Figure 3. The mutants were expressed and purified to homogeneity (Figure 3A, ‘minus’ lanes). All mutant proteins had an inhibitory activity similar to wt PAI-2 and they formed SDS-stable complexes with uPA (Figure 3A, ‘plus’ lanes). To study polymerizing ability, mutant proteins were analyzed by non-denaturing PAGE (Figure 3) before (‘minus’ lanes) and after (‘plus’ lanes) incubation at 37°C for 24 h. As shown in Figure 3B, wt PAI-2, as well as the C5S and C145S mutants, were partly polymerized already after the purification, and they formed more dimers, trimers and higher order polymers after incubation at 37°C. The same result was also seen for the double mutant C5S/C145S (data not shown). Mutant C161S (Figure 3B) and the double mutant C5S/C161S (data not shown) appeared on the gel as a mixture of monomers and dimers, and more dimers were formed following incubation at 37°C. However, with these mutants, no higher order polymers were formed even after prolonged incubation at 37°C. The mutants involving C79 (C79S, Figure 3B; and double mutant C5S/C79S, data not shown) always migrated as monomers, regardless of the incubation. As shown in Figure 3C, the activity of wt PAI-2 decreased by ~70% following incubation at 37°C due to formation of inactive loop–sheet polymers. However, despite differences in the oligomerization patterns, both the C79S and C161S mutants remained almost fully active after this treatment. To characterize further the dimers formed by the C161S mutant, molecular sieving experiments were performed (Figure 4). In agreement with results from non-denaturing PAGE, wt PAI-2 eluted from the column in peaks corresponding to inhibitory active monomers and inactive polymers. In contrast, the C161S mutant eluted in two peaks corresponding to monomers and dimers, but both forms had inhibitory activity. The dimers formed by the C161S mutant were therefore not formed by the loop–sheet mechanism, but presumably by intermolecular disulfide bonding between the free cysteines at position 79 in two PAI-2 molecules. Supporting this assumption, a mutant of PAI-2, where all cysteines except the cysteine at position 79 were substituted with serines, formed dimers similar to the C161S mutant (data not shown).

figure cdg178f3
Fig. 3. Polymerization and activity tests of PAI-2 mutants with a cysteine substituted by serine. (A) Purified PAI-2 mutants (‘minus’ lanes) and their complexes with uPA (‘plus’ lanes) analyzed by SDS–PAGE ...
figure cdg178f4
Fig. 4. Molecular sieving of wt PAI-2 and the C161S mutant. The PAI-2 proteins pre-incubated in 50 mM Tris–HCl pH 7.4 for 24 h at 37°C were analyzed on a Sephacryl S-200 (Pharmacia, Uppsala, Sweden) column (1 × 120 cm) ...

Identification of a disulfide bond that stabilizes PAI-2 in a polymerogenic conformation

The above data suggest the presence of an intramolecular disulfide bond between C79 and C161, which affects the folding properties of PAI-2 by linking the CD-loop to the bottom of helix F. If the disulfide bond rather than the conformation of the CD-loop is important for the polymerization to occur, mutations in the CD-loop should not influence the ability of PAI-2 to polymerize as long as the disulfide bond is intact. Supporting this assumption, substitution mutants K87E and F81K, which should dramatically change the conformation of the CD-loop, had no influence on the ability of PAI-2 to polymerize (Figure 5, lanes 1 and 2). Subsequently, we constructed a PAI-2 mutant (C5S/C145S/C161S/C405S) where all cysteines except those at positions 79 and 161 were substituted with serines. This mutant, denoted as 79cys/161cys, was active and formed a complex with uPA (data not shown). As shown in Figure 5, lane 3, the 79cys/161cys mutant formed higher order polymers after incubation at 37°C, but, after reduction and modification of the cysteines, remained in a stable monomeric form (Figure 5, lane 4).

figure cdg178f5
Fig. 5. Importance of the C79–C161 disulfide bond for PAI-2 polymerization. PAI-2 mutants were analyzed by non-denaturing PAGE followed by western blot. Lane 1, PAI-2 mutant with the K87E substitution in the CD-loop; lane 2, PAI-2 mutant ...

To prove the existence of a disulfide bond between residues C79 and C161, wt PAI-2 and 79cys/161cys protein were digested with trypsin or chymotrypsin and analyzed by matrix-assisted laser desorption ionization time of flight (MALDI-TOF) mass spectrometry. The results of analysis of the chymotrypsin-digested PAI-2 proteins are shown in Table I. Peaks at the masses corresponding to the dipeptides connected by the C5–C405 disulfide bond were detected in wt PAI-2, but not in the 79cys/161cys mutant that lacks the C5 and C405 residues. Dipeptides containing the C79–C161 disulfide bond were present in both wt PAI-2 and the 79cys/161cys mutant, but absent when the samples were reduced and blocked with a cysteine-specific probe before the analysis (data not shown). The same results were obtained by the MALDI-TOF analysis of the PAI-2 proteins digested with trypsin (data not shown). Taken together, the data clearly showed the presence of a disulfide bond between residues C79 and C161 in wt PAI-2 and in the 79cys/161cys mutant.

Table I.
Dipeptides connected by disulfide bonds identified using MALDI-TOF mass spectrometry following digestion of PAI-2 with chymotrypsin

The effect of cysteine substitutions on the conformation of the A-β-sheet of PAI-2

RCL peptide annealing experiments can be used to study the conformation of the A-β-sheet (Skinner, 1998). When a synthetic RCL peptide anneals into the A-β-sheet, it occupies the space where the RCL loop normally inserts (Skinner, 1998; Jankova et al., 2001). After the annealing, serpins become inactive monomers, which are cleaved like substrates by their target proteases (Björk et al., 1992; Chang et al., 1996). To test if the polymerogenic conformation of PAI-2 has an A-β-sheet with a more open conformation than the non-polymerizing C79S and C161S substitution mutants, we performed annealing experiments with a synthetic peptide homologous to the RCL of PAI-2. The PAI-2 proteins were pre-incubated with different molar excesses of the RCL peptide for 6 h at 37°C, mixed with uPA and analyzed by SDS–PAGE followed by western blot analysis. As shown in Figure 6A (insert), the amount of cleaved PAI-2, which corresponded to the binary complex between wt PAI-2 and the RCL peptide, increased over time. For all PAI-2 forms studied, the amount of annealed RCL peptide increased with increasing concentrations of the peptide. However, about twice as much peptide annealed into polymerizing forms of PAI-2 (wt, C5S and C145S mutants; open symbols), as compared with the non-polymerizing mutants (C79S, C161S, C5S/C79S and C5S/C161S mutants; filled symbols) (Figure 6A). To measure the kinetics of the annealing reaction, samples of PAI-2 were incubated with a 100-fold excess of RCL peptide and the annealing was recorded over a time. As shown in Figure 6B, the annealing reaction was much faster for the polymerizing forms of PAI-2 than for the non-polymerizing C79S, C161S and C5S/C79S mutants. These data suggest that the A-β-sheet is significantly more open in wt PAI-2 and in the polymerizing mutants than in the non-polymerizing forms of PAI-2.

figure cdg178f6
Fig. 6. Annealing of synthetic peptides into wt PAI-2 and the mutants. (A) Wt PAI-2 and the mutants were incubated with different molar excesses of a synthetic peptide homologous to RCL of PAI-2 (in 50 mM Na-phosphate buffer pH 5.9, ...

In other serpins, the extent of the A-β-sheet opening correlates with the volume of hydrophobic cavities on the serpin surface (Whisstock et al., 2000). The bis-ANS is a conventionally used probe that binds to the hydrophobic cavities on protein surfaces with a resultant increase of its fluorescence intensity (Busby et al., 1981; Desai et al., 2002). As shown in Figure 7, the non-polymerizing C79S mutant bound about three times more bis-ANS probe than wt PAI-2, and the initial rate of bis-ANS binding to C79S mutant was about seven times higher as compared with wt PAI-2. This suggests that the C79S substitution causes significant changes in the volume of hydrophobic cavities in the PAI-2 molecule. Taken together, the RCL peptide annealing experiments and the bis-ANS-binding experiments support the conclusion that wt PAI-2 spontaneously polymerizes because it has an open A-β-sheet stabilized by the C79–C161 disulfide bond. Elimination of this disulfide bond results in profound conformational changes in the PAI-2 molecule, including a closure of the A-β-sheet.

figure cdg178f7
Fig. 7. Probing hydrophobic cavities in polymerizing and non-polymerizing forms of PAI-2 by bis-ANS binding. The bis-ANS was mixed with a monomeric wt PAI-2 and C79S mutant, and the fluorescence was measured by exciting at 370 nm and measuring ...

Polymerization of PAI-2 in different cellular compartments

PAI-2, which is naturally expressed by eukaryotic cells, is found mainly in the cytosol. However, a fraction of the PAI-2 protein can be directed to the secretory pathway where it is glycosylated and translocated to the extracellular environment (Genton et al., 1987; Wohlwend et al., 1987; Belin et al., 1989). Since the environment in the cytosol is more reducing than in the organelles of the secretory pathway, we compared the polymerization of PAI-2 in the two intracellular compartments. The Semliki forest virus (SFV) expression system and CHO cells were used to express wt PAI-2 and a PAI-2 construct containing the signal peptide of PAI-1. In the latter construct, PAI-2 was engineered to enter the secretory pathway (Mikus and Ny, 1996). Cell extracts were analyzed by SDS– PAGE. Consistent with previous data, wt PAI-2 was non-glycosylated (Figure 8A, lane 1) and, therefore, is cytosolic. In contrast, PAI-2 directed through the ER was glycosylated (Figure 8A, lane 2). When analyzed on a non-denaturing gel, PAI-2 present in the cytosol was mainly monomeric (Figure 8B, lane 1), whereas PAI-2 that had been directed through the ER was highly polymerized (Figure 8B, lane 2).

figure cdg178f8
Fig. 8. Polymerization of PAI-2 in vivo. Wt PAI-2 and PAI-2 fused with signal peptide derived from PAI-1 were overexpressed in CHO cells using the SFV expression system. Cell extracts in 50 mM phosphate buffer pH 5.9 were fractionated ...

Discussion

The serpins are the most widespread among protease inhibitors and they control proteases in many patho-physiological processes, including complement activation, inflammation, coagulation, fibrinolysis, carcinogenesis, angiogenesis and apoptosis (Silverman et al., 2001). There exist >250 serpins in nature, and the evolutionary success of this protein family apparently can be explained by their unique ability for conformational change and structural mobility (Stein and Carrell, 1995). These properties allow the serpins to inhibit target proteases efficiently by translocation and, in some cases, to regulate their inhibitory activity by interaction with cofactors (Stein and Carrell, 1995). However, these remarkable folding properties make the serpins sensitive to mutations that lead to the formation of dysfunctional variants. In some naturally occurring pathological mutants, the RCL of one molecule inserts into the A-β-sheet of an adjacent molecule, resulting in spontaneous aggregation by so-called loop–sheet polymerization. Deposition of such aggregates within tissues or cellular compartments is linked to various forms of disease (Stein and Carrell, 1995).

With the exception of PAI-2, most natural serpins are stable active monomers under physiological conditions. These serpins require molecular destabilization by treatment under mild denaturing conditions before polymerization takes place (Dafforn et al., 1999). There are two unique features that distinguish PAI-2 from other more well-studied serpins. It has an unusually long insertion between helices C and D (the CD-loop) and it spontaneously forms loop–sheet polymers under physiological conditions (Mikus et al., 1993; Mikus and Ny, 1996).

Here we show that PAI-2 has a unique ability to regulate its conformation and thereby acquires the ability to polymerize. The polymerogenic conformation of PAI-2 has an open A-β-sheet, which is stabilized by a disulfide bond between C79, in the middle of the CD-loop, and C161, at the bottom of the serpin. Elimination of this disulfide bond causes A-β-sheet closure and abrogates polymerization, whereby PAI-2 becomes a stable inhibitory active monomer. The data suggest that the CD-loop of PAI-2 is a new functional domain that functions as a redox-sensitive molecular switch with the ability to convert PAI-2 between a stable inhibitory active monomeric conformation and a polymerogenic conformation that readily forms inactive polymers. Our finding that intracellular non-glycosylated PAI-2 exists mostly in monomeric form, whereas PAI-2 that is directed into the secretory pathway is highly polymerized, suggests that the redox status of the cell could be a regulator of PAI-2 polymerization.

The PAI-2 protein used in this study has five cysteine residues (Figure 1), but only two, C79 and C161, are conserved in PAI-2 in different species, implying that these cysteines may be of functional importance. The fact that polymerization of PAI-2 could be abrogated under reducing conditions (Figure 2) indicated that disulfide bond(s) may be important for the polymerization to occur. By mutational analysis, we could show that substitution of C5, C405 and C145 had no effect on polymerization, but substitution of C79 or C161 resulted in stable non-polymerizing monomeric forms of PAI-2. Subsequently, a disulfide bond between these residues was identified by MALDI-TOF mass spectrometry. The data therefore show that a disulfide bond, which connects the CD-loop to the bottom of helix F, is obligatory to keep PAI-2 in a polymerogenic conformation. Elimination of the disulfide bond by reduction, cysteine substitution or complete deletion of the CD-loop (S.Lobov, M.Wilczynska, F.Bergström, L.B.-Å.Johansson and T.Ny, unpublished data) converts PAI-2 into a stable monomeric conformation.

To test if the disulfide bond between C79 and C161 constitutes a conformational link between the CD-loop and the A-β-sheet, two different approaches were used. As shown by others (Elliott et al., 2000), there is a correlation between the volume of hydrophobic cavities on the serpin surface and the extent of A-β-sheet opening. By using the dye bis-ANS that binds to and senses changes in protein surface hydrophobicity (Williams et al., 1999; Desai et al., 2002), we could show that elimination of the disulfide bond between C79 and C161 resulted in an increase in the volume of hydrophobic cavities (Figure 7). To test if the polymerogenic conformation with an intact disulfide bond has an A-β-sheet with a more open conformation than the non-polymerizing forms that lacks the disulfide bond, we performed RCL peptide annealing experiments. As shown in Figure 6, an external RCL peptide anneals into the A-β-sheet (in the place of the vacant strand 4A) much faster and to a larger extent in the polymerizing than in the non-polymerizing forms of PAI-2. Taken together, our data show that PAI-2’s unique ability to polymerize is due to an unusually open A-β-sheet, and that this conformation is stabilized by the disulfide-linked CD-loop.

The crystal structure of an active PAI-2 mutant that lacks the CD-loop has been solved recently (Harrop et al., 1999). According to our data, this structure should represent the stable non-polymerizing form of PAI-2. Indeed, Escherichia coli expressed and purified PAI-2 mutant lacking the CD-loop was active and stable in monomeric form (S.Lobov, M.Wilczynska, F.Bergström, L.B.-Å.Johansson and T.Ny, unpublished data). With the exception of the breach region, which is the place where insertion of the RCL begins during inhibition, there are no striking differences between the structure of PAI-2 and that of other serpins. However, in this region, the PAI-2 mutant has a partially opened A-β-sheet. The Z-mutation of α1-antitrypsin, which causes spontaneous polymerization of this serpin, maps to the breach region and results in molecular rearrangements similar to those found in PAI-2 (Lomas et al., 1992). This molecular feature could, therefore, determine the ability of PAI-2 to polymerize. However, as we have shown (Wilczynska et al., 2003), the breach region of PAI-2 has a minor effect on polymerization and modifies rather than determines the polymerization ability of the serpin.

The finding that the CD-loop of PAI-2 functions as a molecular switch between the polymerizing and non-polymerizing conformations appears to be logical from a structural point of view. In general terms, helices D and E and the connecting loops have to move in relation to the rest of the serpin molecule before the A-β-sheet can open and allow insertion of the RCL (Stein and Chothia, 1991). It is therefore likely that a connection of the CD-loop with the bottom of helix F through the C79–C161 disulfide bond restricts the mobility of the A-β-sheet and stabilizes it in an open conformation. Consequently, the elimination of this disulfide bond would restore the conformational mobility of the PAI-2 molecule, leading to A-β-sheet closure with concomitant loss of the ability to polymerize.

Several hydrophobic cavities have been identified in serpins. Because it is a potential target for drugs neutralizing serpin activity and preventing serpin polymerization (Björquist et al., 1998; Elliott et al., 2000), a cavity located between strand 2 of the A-β-sheet, helix D and helix E has been studied extensively. In active PAI-1, this cavity binds various organic compounds, including bis-ANS (Egelund et al., 2001). The cavity is also present in the PAI-2 mutant lacking the CD-loop, that according to our data represents the non-polymerizing form with a closed A-β-sheet. However, in a structure of the same PAI-2 mutant in complex with a RCL peptide, which has the A-β-sheet with an open conformation, this cavity is closed (Jankova et al., 2001). Changes in the volume of hydrophobic cavities that correlate with A-β-sheet closure (Figure 7) may therefore relate to conformational rearrangements in the cavity located between strand 2 of the A-β-sheet, helix D and helix E.

Disulfide bonds are only present in a few extracellular serpins, and when present they often connect specific extensions to the main body of serpin molecule. Thus, disulfide bonds stabilize the N-terminal extensions in the C1 inhibitor (Simonovic and Patston, 2000) and in antithrombin III (Sun and Chang, 1989), and the short (6–7 amino acid residues) CD-loops found in ovalbumin, angiotensinogen and gene Y protein (Huber and Carrell, 1989). The disulfide bonds in C1 inhibitor stabilize the protein in the active conformation (Simonovic and Patston, 2000), and the disulfide bond in antithrombin III is required for heparin activation of the serpin (Longas et al., 1980). However, as far as we know, this is the first time that intramolecular disulfide bond formation has been linked to serpin polymerization. It is tempting to speculate that the CD-loop in PAI-2 is a novel redox-regulated molecular switch with a biological function. PAI-2 can be found as non-glycosylated cytosolic protein and as glycosylated protein that is secreted by the Golgi-dependent secretory pathway (Genton et al., 1987; Wohlwend et al., 1987; Ny et al., 1989; von Heijne et al., 1991). The relative distribution of the intracellular and secreted PAI-2 depends on cell type and differentiation state, and varies from almost all PAI-2 being secreted (Ye et al., 1988) to the majority remaining intracellular (Genton et al., 1987; Wohlwend et al., 1987). This finding raises the question as to where and how the polymerization is regulated in the cell. Taking into account that the presence of the C79– C161 disulfide bond is obligatory for PAI-2 to polymerize, the polymerization should occur mainly in the organelles of the secretory pathway or outside the cell. In agreement with this, we found that PAI-2 that was glycosylated, and therefore must have passed through the ER, readily polymerized (Figure 8) (Mikus and Ny, 1996). In contrast, non-glycosylated PAI-2 that originates from the cytosol remained mainly in a monomeric form (Figure 8). However, growing evidence indicates that the intracellular redox status may be modulated in some pathological processes. For example, during a virus infection, virus-encoded redox-regulated proteins can catalyze the formation of the disulfide bonds that are required for the virion assembly in cytosol (Li et al., 2002; White et al., 2002). Therefore, the question remains open of whether the polymerization of PAI-2 can also occur in cytosol under certain conditions.

PAI-2 seems to have been selected by evolution as an inhibitor that can exist in three interconvertible forms: stable monomeric, polymerogenic and polymerized forms. The polymerogenic conformation of PAI-2 is stabilized by the unique redox-sensitive CD-loop. This form of PAI-2 can form loop–sheet polymers spontaneously, or convert to the stable monomeric form following reduction (Figure 9). The physiological function of PAI-2 remains unclear, and it cannot be excluded that all three forms may have distinct biological roles.

figure cdg178f9
Fig. 9. Three interconvertible forms of PAI-2. Under reducing conditions, when disulfide bonds cannot be formed, PAI-2 exists in stable monomeric form with a closed A-β-sheet. This form of PAI-2 resembles that of other native serpins. However, ...

Materials and methods

Construction and purification of PAI-2 mutants

Human PAI-2 was expressed in a thioredoxin reductase-deficient E.coli strain AD494(DE3) by pET15b vector (both from Clontech Laboratories, Inc., USA) encoding PAI-2 fused to a His tag at the N-terminus. Mutagenesis and purification were as described (Wilczynska et al., 2003). Alternatively, wt PAI-2 and its fusion with the secretion signal of PAI-1 were expressed in CHO cells using the SFV system as described previously (Mikus et al., 1993).

Reduction and alkylation of PAI-2

Purified wt PAI-2 (0.19 mg/ml) in 50 mM Tris–HCl buffer pH 8.0 with 0.14 M NaCl (TBS) was incubated with 100 mM DTT for 1 h at 37°C. Then, iodoacetamide was added to a final concentration of 113 mM, and the incubation continued for 30 min at room temperature in the dark. Finally, the PAI-2 protein (defined as ‘blocked’ PAI-2) was desalted on a NAP-25 column (Pharmacia, Uppsala, Sweden), which was equilibrated with TBS buffer.

Annealing of peptides to PAI-2

Different amounts of synthetic HPLC-purified peptides corresponding to the P2–P14 residues of the RCL of PAI-2 (TEAAAGTGGVMTG, the RCL peptide) or a control peptide consisting of residues 80–92 in the CD-loop of PAI-2 (GFMQQIQKGSYPD) were incubated with fully active, monomeric wt PAI-2 or its mutants (30 µg/ml in 50 mM Na-phosphate buffer pH 5.9, with 20% glycerol) at 37°C for 6 h. To study the kinetics, we used a 100-fold excess of peptide over PAI-2. Following incubation with peptide, PAI-2 samples were mixed with a 1.5 M excess of uPA and kept at room temperature for 10 min. After this incubation, sample buffer containing 100 mM DTT was added, and the proteins were analyzed by SDS–PAGE, followed by western blot and enhanced chemiluminescence (ECL) detection using a phosphoimager (GS-250 Molecular Imager™; Bio-Rad). The extent of the annealing was quantified as the relative amount of cleaved PAI-2 in each lane.

MALDI-TOF mass spectrometry analysis

Purified wt PAI-2, as well as non-labeled and BODIPY-labeled 79cys/161cys mutant of PAI-2 were supplied on a non-reducing 10% SDS– polyacrylamide gel where the pH of the resolving gel and the running buffer was adjusted to 8.3. The gel was stained with Coomassie Blue, and pieces with PAI-2 protein were excised, minced and destained further with three washes of 25 mM ammonium bicarbonate with 50% acetonitrile. Following vacuum drying, the gel homogenates were rehydrated with 25 mM ammonium bicarbonate containing 0.1 mg/ml trypsin or chymotrypsin. Following a 16 h digestion at 37°C, the peptides were extracted from the gel pieces with 5% trifluoroacetic acid (TFA)/50% acetonitrile, before being dried and reconstituted in the same solvent. Finally, the samples were mixed with CHCA (α-cyano-4-hydroxycinnamic acid) or sinapinic acid (3,5-dimetoxy-4-hydroxy-cinnamic acid) and dried on the sample target. Mass spectra were acquired using MALDI-TOF mass spectrometry (Voyager DE-STR; Applied Biosystems, Boston, MA) in the positive-ion reflector mode with delayed extraction, using standard conditions.

Other methods

Chromogenic assay for PAI-2 inhibitory activity was according to Mikus et al. (1993). The labeling of PAI-2 with the sulfhydryl-specific derivative of BODIPY was carried out as described previously for PAI-1 (Wilczynska et al., 1997). Bis-ANS binding to PAI-2 was performed as described (Wilczynska et al., 2003). SDS–PAGE (10%) was run according to Laemmli (1970), and non-denaturing PAGE (10%) was performed with the same buffer system, except that SDS was not added. Following PAGE fractionation, the proteins were immunoblotted as described (Towbin et al., 1979). PAI-2 antigen was detected using monoclonal antibodies MAI-21 (Biopool, Umeå, Sweden) and anti-mouse IgG conjugated to horseradish peroxidase (Promega, USA) by the ECL method (Amersham, UK). Protein concentration was determined by the bicinchoninic acid assay (Pierce, USA).

Acknowledgements

This work was supported by a grant from NFR B-AA/Bu 08473-311.

References

  • Bachmann F. (1995) The enigma PAI-2. Gene expression, evolutionary and functional aspects. Thromb. Haemost., 74, 172–179. [PubMed]
  • Baumann U., Huber,R., Bode,W., Grosse,D., Lesjak,M. and Laurell,C.B. (1991) Crystal structure of cleaved human α1-antichymotrypsin at 2.7 Å resolution and its comparison with other serpins. J. Mol. Biol., 218, 595–606. [PubMed]
  • Belin D., Wohlwend,A., Schleuning,W.D., Kruithof,E.K. and Vassalli,J.D. (1989) Facultative polypeptide translocation allows a single mRNA to encode the secreted and cytosolic forms of plasminogen activator inhibitor 2. EMBO J., 8, 3287–3294. [PMC free article] [PubMed]
  • Björk I., Ylinenjarvi,K., Olson,S.T. and Bock,P.E. (1992) Conversion of antithrombin from an inhibitor of thrombin to a substrate with reduced heparin affinity and enhanced conformational stability by binding of a tetradecapeptide corresponding to the P1 to P14 region of the putative reactive bond loop of the inhibitor. J. Biol. Chem., 267, 1976–1982. [PubMed]
  • Björquist P., Ehnebom,J., Inghardt,T., Hansson,L., Lindberg,M., Linschoten,M., Stroemqvist,M. and Deinum,J. (1998) Identification of the binding site for a low-molecular-weight inhibitor of plasminogen activator inhibitor type 1 by site-directed mutagenesis. Biochemistry, 37, 1227–1234. [PubMed]
  • Busby T.F., Atha,D.H. and Ingham,K.C. (1981) Thermal denaturation of antithrombin III. Stabilization by heparin and lyotropic anions. J. Biol. Chem., 256, 12140–12147. [PubMed]
  • Chang W.S., Wardell,M.R., Lomas,D.A. and Carrell,R.W. (1996) Probing serpin reactive-loop conformations by proteolytic cleavage. Biochem. J., 314, 647–653. [PMC free article] [PubMed]
  • Chang W.S., Whisstock,J., Hopkins,P.C., Lesk,A.M., Carrell,R.W. and Wardell,M.R. (1997) Importance of the release of strand 1C to the polymerization mechanism of inhibitory serpins. Protein Sci., 6, 89–98. [PMC free article] [PubMed]
  • Dafforn T.R., Mahadeva,R., Elliott,P.R., Sivasothy,P. and Lomas,D.A. (1999) A kinetic mechanism for the polymerization of α1-antitrypsin. J. Biol. Chem., 274, 9548–9555. [PubMed]
  • Desai U.R., Johns,J.L., Lahaye,L. and Wright,H.T. (2002) Probing reactive center loop insertion in serpins: a simple method for ovalbumin. Anal. Biochem., 302, 81–87. [PubMed]
  • Dickinson J.L., Bates,E.J., Ferrante,A. and Antalis,T.M. (1995) Plasminogen activator inhibitor type 2 inhibits tumor necrosis factor α induced apoptosis. Evidence for an alternate biological function. J. Biol. Chem., 270, 27894–27904. [PubMed]
  • Egelund R., Einholm,A.P., Pedersen,K.E., Nielsen,R.W., Christensen,A., Deinum,J. and Andreasen,P.A. (2001) A regulatory hydrophobic area in the flexible joint region of plasminogen activator inhibitor-1, defined with fluorescent activity-neutralizing ligands. Ligand-induced serpin polymerization. J. Biol. Chem., 276, 13077–13086. [PubMed]
  • Elliott P.R., Pei,X.Y., Dafforn,T.R. and Lomas,D.A. (2000) Topography of a 2.0 Å structure of α1-antitrypsin reveals targets for rational drug design to prevent conformational disease. Protein Sci., 9, 1274–1281. [PMC free article] [PubMed]
  • Fa M., Bergstrom,F., Hagglof,P., Wilczynska,M., Johansson,L.B. and Ny,T. (2000) The structure of a serpin–protease complex revealed by intramolecular distance measurements using donor–donor energy migration and mapping of interaction sites. Structure Fold Des., 8, 397–405. [PubMed]
  • Fitton H.L., Pike,R.N., Carrell,R.W. and Chang,W.S. (1997) Mechanisms of antithrombin polymerisation and heparin activation probed by the insertion of synthetic reactive loop peptides. Biol. Chem., 378, 1059–1063. [PubMed]
  • Genton C., Kruithof,E.K. and Schleuning,W.D. (1987) Phorbol ester induces the biosynthesis of glycosylated and nonglycosylated plasminogen activator inhibitor 2 in high excess over urokinase-type plasminogen activator in human U-937 lymphoma cells. J. Cell Biol., 104, 705–712. [PMC free article] [PubMed]
  • Harrop S.J. et al. (1999) The crystal structure of plasminogen activator inhibitor 2 at 2.0 Å resolution: implications for serpin function. Structure Fold Des., 7, 43–54. [PubMed]
  • Huber R. and Carrell,R.W. (1989) Implications of the three-dimensional structure of α1-antitrypsin for structure and function of serpins. Biochemistry, 28, 8951–8966. [PubMed]
  • Huntington J.A., Read,R.J. and Carrell,R.W. (2000) Structure of a serpin–protease complex shows inhibition by deformation. Nature, 407, 923–926. [PubMed]
  • Jankova L., HarropS.J., Saunders,D.N., Andrews,J.L., Bertram,K.C., Gould,A.R., Baker,M.S. and Curmi,P.M. (2001) Crystal structure of the complex of plasminogen activator inhibitor 2 with a peptide mimicking the reactive center loop. J. Biol. Chem., 276, 43374–43382. [PubMed]
  • Jensen P.H., Lorand,L., Ebbesen,P. and Gliemann,J. (1993) Type-2 plasminogen-activator inhibitor is a substrate for trophoblast transglutaminase and factor XIIIa. Transglutaminase-catalyzed cross-linking to cellular and extracellular structures. Eur. J. Biochem., 214, 141–146. [PubMed]
  • Jensen P.H., Jensen,T.G., Laug,W.E., Hager,H., Gliemann,J. and Pepinsky,B. (1996) The exon 3 encoded sequence of the intracellular serine proteinase inhibitor plasminogen activator inhibitor 2 is a protein binding domain. J. Biol. Chem., 271, 26892–26899. [PubMed]
  • Kruithof E.K., Baker,M.S. and Bunn,C.L. (1995) Biological and clinical aspects of plasminogen activator inhibitor type 2. Blood, 86, 4007–4024. [PubMed]
  • Kumar S. and Baglioni,C. (1991) Protection from tumor necrosis factor-mediated cytolysis by overexpression of plasminogen activator inhibitor type-2. J. Biol. Chem., 266, 20960–20964. [PubMed]
  • Laemmli U.K. (1970) Cleavage of structural proteins during the assembly of the head of bacteriophage T4. Nature, 227, 680–685. [PubMed]
  • Lawrence D.A., Ginsburg,D., Day,D.E., Berkenpas,M.B., Verhamme,I.M., Kvassman,J.O. and Shore,J.D. (1995) Serpin–protease complexes are trapped as stable acyl-enzyme intermediates. J. Biol. Chem., 270, 25309–25312. [PubMed]
  • Li J., Wang,Z., Canagarajah,B., Jiang,H., Kanost,M. and Goldsmith,E.J. (1999) The structure of active serpin 1K from Manduca sexta. Structure Fold Des., 7, 103–109. [PubMed]
  • Li P.P., Nakanishi,A., Clark,S.W. and Kasamatsu,H. (2002) Formation of transitory intrachain and interchain disulfide bonds accompanies the folding and oligomerization of simian virus 40 Vp1 in the cytoplasm. Proc. Natl Acad. Sci. USA, 99, 1353–1358. [PMC free article] [PubMed]
  • Loebermann H., Tokuoka,R., Deisenhofer,J. and Huber,R. (1984) Human α1-proteinase inhibitor. J. Mol. Biol., 177, 531–556. [PubMed]
  • Lomas D.A., Evans,D.L., Finch,J.T. and Carrell,R.W. (1992) The mechanism of Z α1-antitrypsin accumulation in the liver. Nature, 357, 605–607. [PubMed]
  • Lomas D.A., Evans,D.L., Stone,S.R., Chang,W.S. and Carrell,R.W. (1993) Effect of the Z mutation on the physical and inhibitory properties of α1-antitrypsin. Biochemistry, 32, 500–508. [PubMed]
  • Longas M.O., Ferguson,W.S. and Finlay,T.H. (1980) A disulfide bond in antithrombin is required for heparin-accelerated thrombin inactivation. J. Biol. Chem., 255, 3436–3441. [PubMed]
  • Mast A.E., Enghild,J.J. and Salvesen,G. (1992) Conformation of the reactive site loop of α1-proteinase inhibitor probed by limited proteolysis. Biochemistry, 31, 2720–2728. [PubMed]
  • Mikus P. and Ny,T. (1996) Intracellular polymerization of the serpin plasminogen activator inhibitor type 2. J. Biol. Chem., 271, 10048–10053. [PubMed]
  • Mikus P., Urano,T., Liljestrom,P. and Ny,T. (1993) Plasminogen-activator inhibitor type 2 (PAI-2) is a spontaneously polymerising serpin. Biochemical characterisation of the recombinant intracellular and extracellular forms. Eur. J. Biochem., 218, 1071–1082. [PubMed]
  • Ny T., Hansson,L., Lawrence,D., Leonardsson,G. and Astedt,B. (1989) Plasminogen activator inhibitor type 2 cDNA transfected into Chinese hamster ovary cells is stably expressed but not secreted. Fibrinolysis, 3, 189–196.
  • Patston P.A., Hauert,J., Michaud,M. and Schapira,M. (1995) Formation and properties of C1-inhibitor polymers. FEBS Lett., 368, 401–404. [PubMed]
  • Risse B.C., Brown,H., Lavker,R.M., Pearson,J.M., Baker,M.S., Ginsburg,D. and Jensen,P.J. (1998) Differentiating cells of murine stratified squamous epithelia constitutively express plasminogen activator inhibitor type 2 (PAI-2). Histochem. Cell Biol., 110, 559–569. [PubMed]
  • Silverman G.A. et al. (2001) The serpins are an expanding superfamily of structurally similar but functionally diverse proteins. Evolution, mechanism of inhibition, novel functions and a revised nomenclature. J. Biol. Chem., 276, 33293–33296. [PubMed]
  • Simonovic I. and Patston,P.A. (2000) The native metastable fold of C1-inhibitor is stabilized by disulfide bonds. Biochim. Biophys. Acta, 1481, 97–102. [PubMed]
  • Skinner R., Chang,W.S., Jin,L., Pei,X., Huntington,A., Abrahams,J.P., Carrell,R.W. and Lomas,D.A. (1998) Implications for function and therapy of a 2.9 Å structure of binary-complexed antithrombin. J. Mol. Biol., 283, 9–14. [PubMed]
  • Stein P.E. and Carrell,R.W. (1995) What do dysfunctional serpins tell us about molecular mobility and disease? Nat. Struct. Biol., 2, 96–113. [PubMed]
  • Stein P. and Chothia,C. (1991) Serpin tertiary structure transformation. J. Mol. Biol., 221, 615–621. [PubMed]
  • Stein P.E., Leslie,A.G., Finch,J.T., Turnell,W.G., McLaughlin,P.J. and Carrell,R.W. (1990) Crystal structure of ovalbumin as a model for the reactive centre of serpins. Nature, 347, 99–102. [PubMed]
  • Stratikos E. and Gettins,P.G. (1997) Major proteinase movement upon stable serpin–proteinase complex formation. Proc. Natl Acad. Sci. USA, 94, 453–458. [PMC free article] [PubMed]
  • Sun X.J. and Chang,J.Y. (1989) Heparin binding domain of human antithrombin III inferred from the sequential reduction of its three disulfide linkages. An efficient method for structural analysis of partially reduced proteins. J. Biol. Chem., 264, 11288–11293. [PubMed]
  • Towbin H., Staehelin,T. and Gordon,J. (1979) Electrophoretic transfer of proteins from polyacrylamide gels to nitrocellulose sheets: procedure and some applications. Proc. Natl Acad. Sci. USA, 76, 4350–4354. [PMC free article] [PubMed]
  • von Heijne G., Liljestrom,P., Mikus,P., Andersson,H. and Ny,T. (1991) The efficiency of the uncleaved secretion signal in the plasminogen activator inhibitor type 2 protein can be enhanced by point mutations that increase its hydrophobicity. J. Biol. Chem., 266, 15240–15243. [PubMed]
  • Whisstock J.C., Skinner,R., Carrell,R.W. and Lesk,A.M. (2000) Conformational changes in serpins: I. The native and cleaved conformations of α1-antitrypsin. J. Mol. Biol., 296, 685–699. [PubMed]
  • White C.L., Senkevich,T.G. and Moss,B. (2002) Vaccinia virus G4L glutaredoxin is an essential intermediate of a cytoplasmic disulfide bond pathway required for virion assembly. J. Virol., 76, 467–472. [PMC free article] [PubMed]
  • Wilczynska M., Fa,M., Ohlsson,P.I. and Ny,T. (1995) The inhibition mechanism of serpins. Evidence that the mobile reactive center loop is cleaved in the native protease–inhibitor complex. J. Biol. Chem., 270, 29652–29655. [PubMed]
  • Wilczynska M., Fa,M., Karolin,J., Ohlsson,P.I., Johansson,L.B. and Ny,T. (1997) Structural insights into serpin–protease complexes reveal the inhibitory mechanism of serpins. Nat. Struct. Biol., 4, 354–357. [PubMed]
  • Wilczynska M., Lobov,S. and Ny,T. (2003) The spontaneous polymerization of plasminogen activator inhibitor type-2 and Z-antitrypsin are due to different molecular aberrations. FEBS Lett., 537, 11–16. [PubMed]
  • Williams D.L., Risse,B., Kim,S., Saunders,D., Orlin,S., Baker,M.S., Jensen,P.J. and Lavker,R.M. (1999) Plasminogen activator inhibitor type 2 in human corneal epithelium. Invest. Ophthalmol. Vis. Sci., 40, 1669–1675. [PubMed]
  • Wohlwend A., Belin,D. and Vassalli,J.D. (1987) Plasminogen activator-specific inhibitors in mouse macrophages: in vivo and in vitro modulation of their synthesis and secretion. J. Immunol., 139, 1278–1284. [PubMed]
  • Ye R.D., Wun,T.C. and Sadler,J.E. (1988) Mammalian protein secretion without signal peptide removal. Biosynthesis of plasminogen activator inhibitor-2 in U-937 cells. J. Biol. Chem., 263, 4869–4875. [PubMed]
  • Ye R.D., Ahern,S.M., Le-Beau,M.M., Lebo,R.V. and Sadler,J.E. (1989) Structure of the gene for human plasminogen activator inhibitor-2. The nearest mammalian homologue of chicken ovalbumin. J. Biol. Chem., 264, 5495–5502. [PubMed]

Articles from The EMBO Journal are provided here courtesy of The European Molecular Biology Organization
PubReader format: click here to try

Formats:

Related citations in PubMed

See reviews...See all...

Cited by other articles in PMC

See all...

Links

Recent Activity

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

See more...