• We are sorry, but NCBI web applications do not support your browser and may not function properly. More information
Logo of nihpaAbout Author manuscriptsSubmit a manuscriptNIH Public Access; Author Manuscript; Accepted for publication in peer reviewed journal;
Nature. Author manuscript; available in PMC Jun 1, 2006.
Published in final edited form as:
PMCID: PMC1350984
NIHMSID: NIHMS6714

Lipid-protein interactions in double-layered two-dimensional AQP0 crystals

Abstract

Lens-specific aquaporin-0 (AQP0) functions as a specific water pore and forms the thin junctions between fibre cells. We describe a 1.9 Å resolution structure of junctional AQP0, determined by electron crystallography of double-layered two-dimensional crystals. Comparison of junctional and non-junctional AQP0 structures shows that junction formation depends on a conformational switch in an extracellular loop, which may result from cleavage of the cytoplasmic N- and C-termini. In the centre of the water pathway, the closed pore in junctional AQP0 retains only three water molecules, which are too widely spaced to form hydrogen bonds with each other. Packing interactions between AQP0 tetramers in the crystalline array are mediated by lipid molecules, which assume preferred conformations. We could therefore build an atomic model for the lipid bilayer surrounding the AQP0 tetramers, and we describe lipid-protein interactions.

Keywords: Aquaporin-0, lens, MIP, two-dimensional crystal, lipid-protein interaction, electron crystallography

Members of the aquaporin (AQP) family form membrane pores that are either highly selective for water (aquaporins) or also permeable to other small neutral solutes such as glycerol and urea (aquaglyceroporins) (reviewed in 1). Structural studies have revealed that all AQPs share the same basic architecture, which consists of two tandem repeats, each containing a bundle of three transmembrane α-helices and a hydrophobic loop with the highly conserved asparagine-proline-alanine (NPA) motif 2-8. The two NPA-containing loops B and E fold back into the membrane and form short α-helices (HB and HE) that line the water pore. The ar/R constriction site, so named because it is formed by an aromatic and an arginine residue, confers water selectivity to AQP pores, while the NPA motifs play an important role in the proton exclusion mechanism (reviewed in 9).

AQP0 is the most abundant protein in lens fibre cell membranes, where it forms not only water pores but also the 11-13 nm “thin lens junctions” that assemble upon proteolytic cleavage of the cytoplasmic termini 10,11. We recently presented the structure of the AQP0-mediated membrane junction at 3 Å resolution as determined by electron crystallography of double-layered two-dimensional (2D) crystals 7. The structure showed that AQP0 junctions are stabilised by specific interactions between tetramers in adjoining membranes involving almost exclusively proline residues. Calculated pore profiles also showed that the pore in junctional AQP0 is highly constricted due to a substantially extended ar/R constriction site and a novel second constriction site 7, which may be involved in the pH regulation of AQP0 water conductance 12.

The 1.9 Å structure of junctional AQP0

The water pore in junctional AQP0 seen at 3 Å resolution appears closed 7. The water molecules were not resolved, however, and we were unable to demonstrate directly the absence of waters from the AQP0 pore. Using a better batch of 2D crystals (Fig. 1a), the carbon sandwich specimen preparation technique 13, and a helium-cooled top-entry 300 kV electron microscope 14, equipped with a field emission gun and a 4K x 4K charge-coupled device (CCD) camera, we have now been able to collect electron diffraction data to much higher resolution.

Figure 1
: Electron crystallography of AQP0 junctions. a. Double-layered AQP0 2D crystals were often several μm in size. b. A typical electron diffraction pattern recorded from an untilted AQP0 2D crystal prepared by the carbon sandwich technique 13 showing ...

Electron diffraction patterns collected from untilted (Fig. 1b) as well as highly tilted specimens (Suppl. Fig. 1) showed strong and sharp diffraction spots to a resolution beyond 2 Å. The final data set comprised 286 diffraction patterns recorded at tilt angles of up to 71.3° that were merged to a resolution of 1.7 Å. The structure was refined with CNS 15 to a resolution of 1.9 Å using scattering factors for 300 kV electrons. The final refinement statistics are summarized in Table 1. At the improved resolution of 1.9 Å, water molecules can clearly be identified in the density map, and the rings of many aromatic residues are represented by donut-shaped densities (Fig. 1c).

Table 1:
Electron crystallographic data.

Junctional versus non-junctional AQP0

Formation of thin junctions in the lens core correlates with proteolytic cleavage of at least a fraction of the AQP0 11,16,17. Comparison of the structure of AQP0 in the 2D crystals we describe here with that of AQP0 in 3D crystals, as reported by Stroud and colleagues 8, allows us to identify differences between junctional and non-junctional conformations. In the 3D crystals, uncleaved AQP0 tetramers do not form junctions, and the pores are filled with water molecules 8. In the double-layered 2D crystals, which only form from the partially proteolytically cleaved AQP0 population purified from lens core, the tetramers interact with each other through their extracellular surfaces (Suppl. Fig. 2b) and thus recapitulate the arrangment in the thin junctions between lens fibre cells 11. In the junctional conformation, the water pores are closed.

When we inspected the 3D crystal structure (PDB 1YMG) with PROCHECK 18 and WHATIF 19, we found that the unit-cell dimensions required adjustment (from a=b=110.53 and c=53.39 to a=b=109.53 and c=52.82). We refined the structure into the adjusted cell and noticed continuous density for both termini (not built in the deposited model). We therefore modelled N-terminal residues 2 to 5 and C-terminal residues 240 to 263. The C-terminus mediates important crystal packing contacts with two neighboring tetramers (Suppl. Fig. 2a). Both termini also engage in interactions that appear to be of functional importance, as described in more detail below. The refinement (see Suppl. Table 1) improved the G-factor 18 from –1.51 to 0.21.

In intact, non-junctional AQP0, the N- and C-terminal regions have ordered conformations (Figs. 2b, c). Arg 226 and Lys 228 near the C-terminus interact electrostatically with Ser 79, Gln 80, and Asp 150; the N-terminus loops back and tucks Trp2 into a hydrophobic pocket lined by Phe 9, Trp 10, and Leu 84 (Fig. 2c). The resulting conformation allows Glu 3 to interact with Ser 240, thereby bridging between the N- and C-terminal segments. All these interactions are eliminated in truncated AQP0 (Figs. 2d, e). Cleavage at residue 234 causes the remainder of the C-terminal segment to move away from the membrane surface, disrupting the previous contacts of Arg 226 and Lys 228 (Fig. 2d). The N- and C-terminal cleavages also eliminate Glu 3 and Ser 240.

Figure 2
: Structural differences between junctional and non-junctional AQP0. a. X-ray structure of non-junctional AQP0 (blue) superimposed on the EM structure of junctional AQP0 (yellow). The arrow indicates the conformational switch of extracellular loop A. ...

How do these changes at the cytoplasmic face affect junctional interactions at the extracellular face? Disruption of the network of interactions involving the two termini appears to correlate with rearrangements in extracellular loop A. Pro 38 is particular critical. In the non-junctional structure, this residue points away from the centre of the tetramer (Fig. 2f); moreover, Trp 34 lies above the pore and projects outward, blocking approach of a second tetramer, and Arg 33 intervenes between two monomers. In the truncated, junctional AQP0 tetramer (Fig. 2g), loop A has reconfigured, positioning Pro 38 so that it can form a rosette-like structure at the centre of the tetramer and mediate a major junctional contact. Arg 33 and Trp 34 also swap positions, so that Trp 34 no longer interferes with close approach of another tetramer. In the completed junction, all three residues interact with the corresponding residues from the apposing tetramer (the two Arg residues interact through a water molecule) (Suppl. Fig. 3).

Water molecules in the AQP0 pore

The water pore in non-junctional AQP0 contains seven water molecules (Fig. 3a, left). Junctional AQP0 contains only three (Fig. 3a, right). The two pores have the same diameter over much of their lengths, but the pore in junctional AQP0 is narrower at the positions of the two constriction sites (Fig. 3a, centre). Constriction site I (CS-I) in non-junctional AQP0 spans 3 Å and has a minimum diameter of 2.31 Å; CS-I of junctional AQP0 extends over 10 Å and the pore narrows to 1.33 Å. The large difference in the length of CS-I is due mainly to the side chain of Met 176, which extends into the pore in junctional AQP0 (Suppl. Fig. 4a) but points away from it in non-junctional AQP0, allowing access by additional water molecules (Suppl. Fig. 4b). Constriction site II (CS-II) is narrower in junctional AQP0 (diameter 1.37 Å) than in non-junctional AQP0 (diameter 1.75 Å). The constricted pore in junctional AQP0 can thus accommodate only three water molecules, which appear to be trapped in the closed pore as it narrows above and below them (Suppl. Fig. 4c,d).

Figure 3
: The water pore in AQP0. a. The pore in non-junctional AQP0 (left) contains seven water molecules (red spheres), while the pore in junctional AQP0 contains only three water molecules (right). Calculated pore profiles (middle) corroborate that the pore ...

In our initial report of the closed water pore in junctional AQP0 7, we proposed that AQP0 and other aquaporins may be in a dynamic equilibrium between an open and a closed pore conformation. We also suggested that pore closure may be triggered by the stabilisation of an alternative conformation of Arg 187 (part of the ar/R constriction site) seen in the structure of junctional AQP0. A recent molecular dynamics study supports this notion, as it showed that Arg 189 in AQPZ (corresponding to Arg 187 in AQP0) could adopt two conformations 20. The “UP” state, which is seen in most AQP crystal structures, had an open pore, filled by a continuous single file of water. The “DOWN” state, seen in our structure of junctional AQP0, had a pore completely blocked by the Arg side chain, and prolonged blockage resulted in loss of all water molecules from the pore. While attractive, a conformational switch of the arginine in the ar/R constriction site cannot be the only mechanism for AQP gating, because Arg 187 is in the “DOWN” state not only in our closed, junctional AQP0 but also in the open, non-junctional AQP0 structure 8. The main difference between the open and closed pore lies in the conformation of the side chain of Met 176 (see above), a residue not present in AQPZ.

The distances between the three water molecules (≥4 Å) in the closed pore are too long for hydrogen bonding (Fig. 3b, right; Suppl. Fig. 5, right). The water coordinated to the Asn residues of the two NPA motifs donates a hydrogen bond to the hydroxyl group of Tyr 24, which in turn donates a hydrogen bond to the water molecule in the extracellular half of the water pathway (Fig. 3b, right; Suppl. Fig. 5, right). The corresponding two water molecules in the open water pore of non-junctional AQP0 have the same hydrogen bonding pattern (Fig. 3b, left; Suppl. Fig. 5, left), and all the other water molecules are in hydrogen-bonding distance to each other. This “phenolic barrier” created by Tyr 24, a residue not seen in the other known AQP structures, may be responsible for the poor water conductance of AQP0 as compared to other AQPs, which contain a continuous line of hydrogen-bonded water molecules. The space occupied by Tyr 24 may also explain why the open AQP0 pore contains only seven water molecules while molecular dynamics studies showed eight waters in AQP1 21,22 and AQPZ 20 and nine in GlpF 23.

AQP0 water conductance is pH-dependent with a maximum at pH 6.5 and only about half the activity at pH 10.5 12. These conductance characteristics are not changed by proteolytic cleavage of AQP0 24. As our structure, obtained with the double-layered 2D crystals grown at pH 6 7, reveals fewer water molecules in the pore than the structure determined from the 3D crystals grown at pH 10.5 8, pore closure appears to be a result of junction formation, not pH shift.

Lipid-protein interactions

Crystals of membrane proteins occasionally contain lipid molecules. For example, the structure of bacteriorhodopsin (bR) from lipid cubic phase crystallization revealed 13 phytanyl lipids, seven of which formed a bilayer structure, and a squalene 25. These, and all other lipids found in crystal structures to date (78 lipids in total 26), originate from the native membrane, from which they co-purify with the crystallized membrane protein. Such tightly bound lipids have been found to be essential for the structural integrity and activity of a number of membrane proteins 27.

None of the AQP 3D crystals examined so far contain lipids, and 2D crystals of AQPs can form with a variety of different lipids, suggesting that AQPs have neither a requirement for specific lipids nor high-affinity lipid binding sites. Nevertheless, our density map revealed that between the AQP0 tetramers are horseshoe-shaped features characteristic of lipid molecules (Fig. 4a). Indeed, close inspection revealed that lipids bridge all the contacts between tetramers within a layer and that the tetramers have essentially no direct lateral interaction. In composite omit maps, we could identify nine lipids per AQP0 monomer, which we modeled as complete or partial molecules of dimyristoyl phosphatidyl choline (DMPC, the lipid used for 2D crystallization) (Fig. 4a). Phospholipid headgroups have a chiral center at C2 of the glycerol, and the DMPC we used is a racemic mixture. Density is weak or absent at most C2 positions in our map, and often at the attached ester group as well, suggesting that there is little or no selectivity for the biological enantiomer. Very strong density for the phosphate groups, weaker but well defined density for the trimethyl amine groups of the cholines, and unambiguous density for the acyl chains allowed us to build and refine a model in which we chose an enantiomer for each lipid more or less arbitrarily. We have not yet attempted to refine the two alternatives with 50% occupancy each. We have annotated these lipids as PC1 to PC9 (Fig. 4b; Suppl. Fig. 6). PC1 to PC7 have extensive protein contacts and appear to represent “annular lipids” immediately adjacent to a membrane embedded protein. PC8 and PC9 are not in contact with protein and thus represent bulk lipids. A detailed description of protein-lipid contacts is provided in Supplementary Materials. As AQP0 has no tight lipid binding sites, interactions between the annular lipids and the AQP0 subunits are likely to represent the kind of contacts that occur between any membrane protein and the lipids surrounding it.

Figure 4
: Lipid-protein interactions in double-layered AQP0 2D crystals. a. Vertical slab through the 2Fo-Fc density map with modelled lipid molecules, revealing the two lipid bilayers in the double-layered AQP0 2D crystal. b. The nine lipids surrounding an AQP0 ...

Annular lipids must adapt to the irregular surface of a transmembrane protein to create a smooth interface for bulk lipids. This fit limits the mobility (and perhaps the chemistry) of annular lipids, as their conformations are partially defined by the protein surface. In our 2D arrays, most of the annular lipids are sandwiched between two tetramers and thus mediate lattice interactions (Suppl. Fig. 7). This packing further restricts their conformations. The cell dimensions of our reconstituted junctions are the same as those in thin junctions between lens fibre cells 28. We therefore suggest that the lipid-protein interactions we observe in our 2D crystals with the artificial lipid DMPC are representative of those formed by AQP0 tetramers with native lipids in lens fibre cell membranes.

The lipids form a one-molecule wide annular shell around the protein. The positions of the headgroups vary by only ±2 Å in the direction perpendicular to the membrane plane, with a separation of about 34 Å from phosphate to phosphate. The dimensions of the bilayer correspond closely to those of fully hydrated, fluid phase DMPC 29. A hydrated network of hydrogen bonds and salt bridges holds the lipid phosphates in place. Protein groups interacting with phosphates include three arginine side chains, a tyrosine hydroxyl that mediates one of the arginine contacts, a lysine, a tryptophan indole nitrogen, a glutamine side-chain amide, and at least one main-chain amide. Similar interactions have been described for specifically bound lipids 30.

Acyl chains fill the gaps between adjacent tetramers. Their conformations clearly adapt to the knobs and grooves of the apposed hydrophobic protein surfaces. Figures 4c-e illustrate three examples. PC1 in the extracellular leaflet is the best ordered of the nine DMPC molecules. Its acyl chains are nearly fully extended, packed against those of PC2 and PC3 and sandwiched between five non-polar side chains from one AQP0 and three from the other. PC5 in the cytoplasmic leaflet has somewhat less extended acyl chains. The phosphate receives a hydrogen bond from the indole nitrogen of Trp 10 and Lys238 (as well as the poorly ordered N-terminal segment) of an adjacent subunit. The acyl chains, packed between those of PC4 and PC6, contact four hydrophobic side chains from one subunit (including the hydrophobic face of Trp10) and three from another. PC6, also in the cytoplasmic leaflet, has widely splayed acyl chains, separated by side chains from the two apposed AQP0 molecules. Phe 14 of one molecule and Leu 217 of another are in van der Waals contact through the gap: the only direct interaction between tetramers within a layer.

PC8 and PC9 lie near the fourfold axis. They do not contact protein and thus represent bulk lipids. Neither is as well ordered as the annular lipids. Indeed, PC8 (in the cytoplasmic leaflet) is probably only statistically ordered (two, rather than four, molecules about a fourfold), as there is space for only one of the two acyl chains and no density for the headgroup. The headgroup of PC9 lies about 3 Å closer to the midplane of the bilayer than those of the four other extracellular leaflet lipids; the bilayer thickness may therefore be influenced by adjacency to the protein.

Disscussion

AQP0 serves a dual function in the lens, by acting both as a water channel and as an adhesion molecule. During differentiation of fibre cells, and as they grow older and become buried more deeply in the lens, AQP0 is cleaved at both termini 16,17,31,32. This processing appears to be the trigger for junction formation 10,11. Comparison of our structure of junctional AQP0 with that of non-junctional AQP0 8 suggests that cleavage of the two cytoplasmic termini translates into a conformational switch in extracellular loop A, eliminating steric hindrance from Trp 34 and allowing Pro 38 to stabilize the junctional interaction. Formation of the junction also appears to correlate with changes in side chain positions of residues lining the pore, most importantly in Met 176, resulting in substantial constriction. Three water molecules are trapped in the centre of the water pathway, too far apart from each other to be linked by hydrogen bonds.

Mutations in AQP0 result in cataracts 33-37. Most of these mutations interfere with correct trafficking of AQP0 to the plasma membrane (reviewed in 38), rather than to interfere with efficient water conduction, as recently proposed 8. The mutations might prevent proper interaction with lipid, however, which in many instances has a key role in folding and integration of membrane proteins into a bilayer 30,39,40.

The lipids in our 2D crystals indeed demonstrate a well-defined role for annular lipids in forming a boundary for the bilayer-inserted protein. The headgroup interactions of these lipids resemble those described for specifically bound lipids 30, and the acyl chains are tightly packed around the laterally projecting hydrophobic side chains of the protein. We suggest that when junctions form between lens fibre cells, the annular lipids already partly immobilized by interaction with AQP0 mediate the lattice contacts, just as DMPC does in our reconstituted junctions. Although the composition of natural membrane lipids is, of course, far less homogeneous than in our crystals, incorporation of both DMPC enantiomers shows that the headgroup interactions are somewhat adjustable, and imperfect crystallinity of the acyl chains suggests that C16 or C18 chains, or even unsaturated chains, could readily be accommodated. It remains to be determined whether AQP0 exhibits selectivity for its annular lipids and hence for the lipid composition within the junctional lattices.

Methods

Purification and 2D crystallization of AQP0 from the lens core

AQP0 was purified from the core of sheep lenses and reconstituted into 2D crystals as described before 7. The 2D crystals were grown at a lipid-to-protein ratio of 0.25 (mg/mg), which corresponds to a molar ratio of 37 lipids per AQP0 tetramer. This is very close to the number of lipids, 36, we could model per AQP0 tetramer.

Electron microscopy and data processing

Negatively stained samples were prepared and imaged as described before 7. Specimens for cryo-electron microscopy were prepared according to 13. Briefly, double-layered AQP0 2D crystals were mixed with an equal amount of 10% trehalose and the suspension applied to a molybdenum grid covered with a thin carbon film. The grid was blotted to remove excess material, and a second carbon film was placed on top of the sample. Grids were plunged into liquid nitrogen and loaded into a JEM3000SFF electron microscope equipped with a top-entry helium stage and operated at an acceleration voltage of 300kV14. Low-dose electron diffraction patterns were recorded with a 4K x 4K CCD camera (Gatan). Electron diffraction patterns were analysed and merged as described 41.

Molecular replacement, model building and refinement

The structure of AQP0 was determined by molecular replacement as described before 7. Crowther Fast Cross-Rotation Function calculations identified an orientation of a single subunit in the asymmetric unit as the top solution with an RF signal twice the value of the second peak. The translation function gave a top solution with an R-factor of 42.7% and a correlation coefficient of 84.3%. The model was refined using CNS version 1.1 15. Rigid body refinement was used to evaluate what scattering factors to use. In a resolution range of 10–2.5 Å, both X-ray and electron scattering factors for 120 kV electrons 41 produced comparable results. In a resolution range of 10 – 1.9 Å electron scattering factors for 300 kV electrons produced the best result (R = 35.92%), as compared to electron scattering factors for 120 kV electrons (R = 67.06%) and X-ray scattering factors (R = 37.39%). For all subsequent refinement steps refinement was performed in a resolution range of 5 – 1.9 Å without bulk solvent flattening, using a unit cell of a = b = 65.5 Å, an assumed thickness of 160 Å, and electron scattering factors for 300 kV electrons. Model building was performed with O 42 using 2Fo-Fc density maps and simulated annealing composite omit maps. Protein residues 5-239 were visible and were modeled (major cleavage sites in vivo 32), together with nine lipid (DMPC) and 76 water molecules. The model was refined by cycles of simulated annealing, B-factor refinement, and remodeling. The final refinement statistics are presented in Table 1.

For the crystal structure of non-junctional AQP0 8 we downloaded the structure factors and coordinates from the Protein Data Bank (ID 1YMG). The structure was evaluated using PROCHECK 18 and WHATIF 19 and the unit cell dimensions adjusted from a=b=110.531 and c= 53.390 to a=b=109.531 and c=52.822. A composit omit map was calculated and a clear continuous density was observed for both N- and C-terminus. We modeled N-terminal residues 2 to 5 and C-terminal residues 240 to 263 in O 42 and refined the structure in CNS version 1.1 15 by cycles of simulated annealing, B-factor refinement, and remodeling. The final refinement statistics are presented in Suppl. Table 1.

Acknowledgements

This work was supported by NIH funding (to TW) and a Grant-in Aid for Specially Promoted Research (to YF).

Footnotes

Suplementary Information accompanies the paper on www.nature.com/nature.

Competing interests statement The authors declare that they have no competing financial interests.

References

1. Agre P, et al. Aquaporin water channels--from atomic structure to clinical medicine. J. Physiol. 2002;542:3–16. [PMC free article] [PubMed]
2. Murata K, et al. Structural determinants of water permeation through aquaporin-1. Nature. 2000;407:599–605. [PubMed]
3. Fu D, et al. Structure of a glycerol-conducting channel and the basis for its selectivity. Science. 2000;290:481–486. [PubMed]
4. Sui H, Han BG, Lee JK, Walian P, Jap BK. Structural basis of water-specific transport through the AQP1 water channel. Nature. 2001;414:872–878. [PubMed]
5. Ren G, Reddy VS, Cheng A, Melnyk P, Mitra AK. Visualization of a water-selective pore by electron crystallography in vitreous ice. Proc. Natl. Acad. Sci. U. S. A. 2001;98:1398–1403. [PMC free article] [PubMed]
6. Savage DF, Egea PF, Robles-Colmenares Y, O'Connell JD, 3rd, Stroud RM. Architecture and selectivity in aquaporins: 2.5 Å X-ray structure of aquaporin Z. PLoS Biol. 2003;1:E72. [PMC free article] [PubMed]
7. Gonen T, Sliz P, Kistler J, Cheng Y, Walz T. Aquaporin-0 membrane junctions reveal the structure of a closed water pore. Nature. 2004;429:193–197. [PubMed]
8. Harries WE, Akhavan D, Miercke LJ, Khademi S, Stroud RM. The channel architecture of aquaporin 0 at a 2.2-Å resolution. Proc. Natl. Acad. Sci. U. S. A. 2004;101:14045–14050. [PMC free article] [PubMed]
9. de Groot BL, Grubmuller H. The dynamics and energetics of water permeation and proton exclusion in aquaporins. Curr. Opin. Struct. Biol. 2005;15:176–183. [PubMed]
10. Kistler J, Bullivant S. Lens gap junctions and orthogonal arrays are unrelated. FEBS Lett. 1980;111:73–78. [PubMed]
11. Gonen T, Cheng Y, Kistler J, Walz T. Aquaporin-0 membrane junctions form upon proteolytic cleavage. J. Mol. Biol. 2004;342:1337–1345. [PubMed]
12. Nemeth-Cahalan KL, Kalman K, Hall JE. Molecular basis of pH and Ca2+ regulation of aquaporin water permeability. J. Gen. Physiol. 2004;123:573–580. [PMC free article] [PubMed]
13. Gyobu N, et al. Improved specimen preparation for cryo-electron microscopy using a symmetric carbon sandwich technique. J. Struct. Biol. 2004;146:325–333. [PubMed]
14. Fujiyoshi Y. The structural study of membrane proteins by electron crystallography. Adv. Biophys. 1998;35:25–80. [PubMed]
15. Brunger AT, et al. Crystallography & NMR system: a new software suite for macromolecular structure determination. Acta Crystallogr. D Biol. Crystallogr. 1998;54:905–921. [PubMed]
16. Roy D, Spector A, Farnsworth PN. Human lens membrane: comparison of major intrinsic polypeptides from young and old lenses isolated by a new methodology. Exp. Eye. Res. 1979;28:353–358. [PubMed]
17. Takemoto L, Takehana M, Horwitz J. Covalent changes in MIP26K during aging of the human lens membrane. Invest. Ophthalmol. Vis. Sci. 1986;27:443–446. [PubMed]
18. Laskowski RA, MacArthur MW, Moss DS, Thornton JM. PROCHECK: a program to check the stereochemical qaulity of protein structures. J. Appl. Cryst. 1993;26:283–291.
19. Vriend G. WHAT IF: a molecular modeling and drug design program. J. Mol. Graph. 1990;8:526–529. [PubMed]
20. Wang Y, Schulten K, Tajkhorshid E. What makes an aquaporin a glycerol channel? A comparative study of AqpZ and GlpF. Structure. 2005;13:1107–1118. [PubMed]
21. de Groot BL, Grubmuller H. Water permeation across biological membranes: mechanism and dynamics of aquaporin-1 and GlpF. Science. 2001;294:2353–2357. [PubMed]
22. Zhu F, Tajkhorshid E, Schulten K. Molecular dynamics study of aquaporin-1 water channel in a lipid bilayer. FEBS Lett. 2001;504:212–218. [PubMed]
23. Tajkhorshid E, et al. Control of the selectivity of the aquaporin water channel family by global orientational tuning. Science. 2002;296:525–530. [PubMed]
24. Ball LE, et al. Water permeability of C-terminally truncated aquaporin 0 (AQP0 1-243) observed in the aging human lens. Invest. Ophthalmol. Vis. Sci. 2003;44:4820–4828. [PubMed]
25. Luecke H, Schobert B, Richter HT, Cartailler JP, Lanyi JK. Structure of bacteriorhodopsin at 1.55 Å resolution. J. Mol. Biol. 1999;291:899–911. [PubMed]
26. Wiener M. In: Protein-lipid interactions: from membrane domains to cellular networks. Tamm LK, editor. WILEY-VCH Verlag GmbH & Co.; Weinheim: 2005.
27. Dowhan W. Molecular basis for membrane phospholipid diversity: why are there so many lipids? Annu. Rev. Biochem. 1997;66:199–232. [PubMed]
28. Zampighi G, Simon SA, Robertson JD, McIntosh TJ, Costello MJ. On the structural organization of isolated bovine lens fiber junctions. J. Cell Biol. 1982;93:175–189. [PMC free article] [PubMed]
29. Kucerka N, et al. Structure of fully hydrated fluid phase DMPC and DLPC lipid bilayers using X-ray scattering from oriented multilamellar arrays and from unilamellar vesicles. Biophys. J. 2005;88:2626–2637. [PMC free article] [PubMed]
30. Palsdottir H, Hunte C. Lipids in membrane protein structures. Biochim. Biophys. Acta. 2004;1666:2–18. [PubMed]
31. Schey KL, Little M, Fowler JG, Crouch RK. Characterization of human lens major intrinsic protein structure. Invest. Ophthalmol. Vis. Sci. 2000;41:175–182. [PubMed]
32. Ball LE, Garland DL, Crouch RK, Schey KL. Post-translational modifications of aquaporin 0 (AQP0) in the normal human lens: spatial and temporal occurrence. Biochemistry. 2004;43:9856–9865. [PubMed]
33. Shiels A, Bassnett S. Mutations in the founder of the MIP gene family underlie cataract development in the mouse. Nat. Genet. 1996;12:212–215. [PubMed]
34. Shiels A, Mackay D, Bassnett S, Al-Ghoul K, Kuszak J. Disruption of lens fiber cell architecture in mice expressing a chimeric AQP0-LTR protein. FASEB J. 2000;14:2207–2212. [PubMed]
35. Francis P, et al. Functional impairment of lens aquaporin in two families with dominantly inherited cataracts. Hum. Mol. Genet. 2000a;9:2329–2334. [PubMed]
36. Francis P, Berry V, Bhattacharya S, Moore A. Congenital progressive polymorphic cataract caused by a mutation in the major intrinsic protein of the lens, MIP (AQP0) Br. J. Ophthalmol. 2000b;84:1376–1379. [PMC free article] [PubMed]
37. Okamura T, et al. Bilateral congenital cataracts result from a gain-of-function mutation in the gene for aquaporin-0 in mice. Genomics. 2003;81:361–8. [PubMed]
38. Chepelinsky AB. The ocular lens fiber membrane specific protein MIP/Aquaporin 0. J. Exp. Zoolog. A. Comp. Exp. Biol. 2003;300:41–46. [PubMed]
39. Lee AG. How lipids affect the activities of integral membrane proteins. Biochim. Biophys. Acta. 2004;1666:62–87. [PubMed]
40. Jensen MO, Mouritsen OG. Lipids do influence protein function-the hydrophobic matching hypothesis revisited. Biochim. Biophys. Acta. 2004;1666:205–226. [PubMed]
41. Mitsuoka K, et al. The structure of bacteriorhodopsin at 3.0 Å resolution based on electron crystallography: implication of the charge distribution. J. Mol. Biol. 1999;286:861–882. [PubMed]
42. Jones TA, Zou JY, Cowan SW, Kjeldgaard M. Improved methods for building protein models in electron density maps and the location of errors in these models. Acta Crystallogr. A. 1991;47:110–119. [PubMed]
PubReader format: click here to try

Formats:

Related citations in PubMed

See reviews...See all...

Cited by other articles in PMC

See all...

Links

Recent Activity

Your browsing activity is empty.

Activity recording is turned off.

Turn recording back on

See more...