NCBI C Toolkit Cross Reference

	Name		Size		Date (GMT)		Description
	Parent directory				2009-12-08 04:38:03
	mac/				2009-12-08 04:37:11
	unix/				2009-12-08 04:37:11
	vms/				2009-12-08 04:37:11
	win/				2009-12-08 04:37:11
	README		13981		1997-08-25 18:14:01

   
   Beginning with Release 2.0 of the Entrez:Sequences and Pre-Release 1.0 of the
   Entrez:MEDLINE CD-ROMs, it is possible for the Entrez application to access
   one or both data sets. This will allow users to potentially have access to the
   rich set of MEDLINE articles on the Entrez:MEDLINE disc, while simultaneously
   having access to the sequence data on the Entrez:Sequences disc.
   
   This functionality requires both
    i) a new version of the Entrez application software, and
  ii) a more complex configuration file, to handle the wide variety of
      possible configurations.
  
  Users who wish to use only _one_ of the Entrez:Sequences or Entrez:MEDLINE discs
  (never in combination) will not need to make any changes in their configuration
  files; the new Entrez software is backwards compatible with these old
  configuration files. If you fall into this catagory and have already installed
  Entrez on your machine, then there is no need to read further.
  
  Note that the complex configuration mechanism which is discussed below is
  not currently supported. We would, however, appreciating hearing about any
  problems which you may encounter. A supported version with a user-friendly
  configuration program will be provided with Release 3.0 of the Entrez:Sequences
  CD-ROM.
  
  Also note that, because there will be no pre-Release 2.0 Entrez:MEDLINE CD-ROM,
  there will be a few MEDLINE abstracts which will be present on the latest
  Entrez:Sequences CD-ROM (Release 2.0), but not on the latest Entrez:MEDLINE
  CD-ROM (Pre-Release 1.0). This is a deviation from future CD-ROM releases,
  when the MEDLINE records on the latest Entrez:Sequences CD-ROM will be a
  proper subset of those sequences on the latest Entrez:MEDLINE CD-ROM.
  
  Users who wish to use both CD-ROMs on a single CD-ROM drive are advised to
  make sure that they have two CD-ROM caddies available (one for each CD).
  Frequent switching of CD-ROMs between a single caddy and the CD jewel boxes can
  induce high levels of stress.
  
  Seven pre-canned configuration files are made available, with corresponding
  .ini and .cnf files for MS Windows and the Macintosh, respectively. The
  selected file should be modified as appropriate for your machine, renamed
  to NCBI.INI or ncbi.cnf, and used to replace the NCBI.INI or ncbi.cnf file, as
  outlined on the Entrez manual's installation instructions.
  
  
  The pre-canned configuration files are as follows:
  
      NCBISM1D.XXX      MEDLINE and Sequence CDs, with only one CD-ROM drive
      NCBISM2D.XXX      MEDLINE and Sequence CDs, with two CD-ROM drives
      NCBIMO.XXX        MEDLINE CD only
      NCBISO.XXX        Sequence CD only
      NCBISHMC.XXX      Harddisk-based Sequence CD image, and MEDLINE CD-ROM
      NCBISCMH.XXX      Harddisk-based MEDLINE CD image, and Sequence CD-ROM
      NCBISHMH.XXX      MEDLINE CD and Sequence CD images, both on hard disk
  
  The following customizations may be necessary for your machine:
  
  * For all files, the only changes to be made will be within the first 20-or-so
    lines of the configuration file, within the "NCBI" section and the media
    sections "ENTREZ_xxx_yD" (where xxx is one of "SEQ" or "MED", and y is one of
    "C" or "H").
  
  * A copy of the CDROMDAT.VAL for each CD-ROM to be used must be stored on the
    hard disk, in the directory pointed to by the "VAL" field for the
    corresponding media. Note that these files are _different_ for the Sequence
    and MEDLINE CD-ROMs, and the correct file must be stored in each prescribed
    location.
  
  * For improved performance, a copy of the index files should be copied onto
    the hard disk for each CD-ROM to be used, if space is available. These
    canned configuration files assume the availability of such index files on a
    hard disk. If you choose not to install the index files, then remove the
    "IDX=" lines from the configuration file which you have selected. Again,
    note that the index files are _different_ for the Sequence and MEDLINE
    CD-ROMs, and the correct files must be stored in each prescribed location.
  
  * For MS-Windows, it is assumed that the first CD-ROM drive is drive D and the
    second CD-ROM drive (NCBISM2D.INI only) is drive E. Change this as necessary.
  
  * For Macintosh systems, the hard disk name yourHardDisk should be changed to
    the name of your hard disk.
  
  * For both types of systems, it is assumed that all hard disk files reside on
    the same hard disk. Change this as necessary.
  
  * If you choose to copy both CD-ROMs to your hard disk (NCBISHMH.XXX), then
    you need not copy the medline directory from the Entrez:Sequences CD-ROM
    onto your hard disk, since this portion of MEDLINE is a proper subset of
    the MEDLINE on the Entrez:MEDLINE CD-ROM.
  
  * Note that a copy of the appropriate seven configuration files for your
    platform (Mac or Windows) will be automatically copied by the installation
    procedure into the ENTREZ\CONFIG folder. You may, however, find an alternate
    copy of the configuration files on the CD-ROM in the SOFTWARE\CONFIG folder,
    inside the MAC and WIN folders.
  
  * Note that the "ROOT=" field in the "[NCBI]" section of the multi-source
    configuration files (ncbi????.XXX) is not used by this version of Entrez,
    but is provided for backwards compatability with older versions of Entrez,
    as well as for compatability with other applications using the older
    version of our data access libraries.
 
 * Because the MEDLINE entries on Release 2.0 of the Entrez:Sequences CD-ROM
   are not a proper subset of the entries on pre-Release 1.0 of the
   Entrez:MEDLINE CD-ROM, it may be necessary to set an additional configuration
   parameter, if you begin to encounter "Missing UID" errors when running
   Entrez. This is the only parameter which should be set in the
   entrez.[cnf/ini] configuration file; all other parameters should be
   set in the ncbi.[cnf/ini] configuration file. The parameter which should
   be set is "SHOWALLERRORS=FALSE", in the [PREFERENCES] section. It is
   strongly recommended that you first get your configuration of Entrez
   running properly, before adding this line to your entrez.[cnf/ini] file.
   This configuration option will mute many errors, which may make it
   difficult to debug your configuration difficulties.
   
 
 
 EXAMPLE
 
 You wish to use both CD-ROMs, on a single CD-ROM drive, under MS Windows.
 Suppose that the device for your CD-ROM drive is named "F:", not "D:"
 
 Install Entrez from Release 2.0 of the Entrez:Sequences CD-ROM, per the
 installation/update instructions in the manual.
 
 Make a copy of ncbism1d.ini from \ENTREZ\CONFIG\NCBISM1D.INI, first having
 saved a copy of NCBI.INI (if you had one):
 
     COPY C:\WIN\NCBI.INI C:\WIN\NCBIINI.BAK
     COPY C:\ENTREZ\CONFIG\NCBISM1D.INI C:\WIN\NCBI.INI
 
 Edit C:\WIN\NCBI.INI with your favorite editor, and change the occurrences
 of ROOT=D:\ to ROOT=F:\. Save your changes and exit the editor.
 
 Create some directories, if they don't already exist:
     MKDIR C:\ENTREZ\MED
     MKDIR C:\ENTREZ\MED\INDEX
     MKDIR C:\ENTREZ\SEQ
     MKDIR C:\ENTREZ\SEQ\INDEX
 
 Copy the sequence index files, and CDROMDAT.VAL to your hard disk.
     COPY F:\INDEX\*.* C:\ENTREZ\SEQ\INDEX
     COPY F:\CDROMDAT.VAL C:\ENTREZ\SEQ
 
 Now, eject the Entrez:Sequences CD, insert the Entrez:MEDLINE CD, and
 copy the MEDLINE index files and CDROMDAT.VAL to your hard disk.
     COPY F:\INDEX\*.* C:\ENTREZ\MED\INDEX
     COPY F:\CDROMDAT.VAL C:\ENTREZ\MED
 
 Now, start-up Windows (if it's not already running), and launch Entrez.
 It doesn't matter which CD-ROM, if any, is inserted into the CD-ROM drive
 (although, for convenience, it generally makes sense to insert the CD-ROM
 which you would like to use first). The Entrez application will inform
 you when it is time to insert the other CD-ROM.
 
 NOTES
 
 When using two CD-ROMs on a single CD-ROM drive, the Macintosh version will
 automatically eject the CD-ROM which is currently inserted. Ejection
 must be performed manually for the Microsoft Windows version.
 
 Ejecting a CD-ROM at times other than that directed by the Entrez application
 may result in undesirable effects.
 
 If you _must_ eject a CD-ROM on the Macintosh when Entrez is running, it
 is important to drag the CD-ROM icon to the trash can, rather than using
 the Eject selection from the Finder's FILE menu. The latter may result in 
 undesirable effects.
 
 
 
 The remainder of this document is a technical discussion which should not
 be necessary for the reader who only wants to install Entrez on their system.
 
 
 ----------------------------------------------------------------------------
 
                            TECHNICAL DISCUSSION
 
 The new configuration files consist of a three-level structure. This
 hierarchy is implemented by using unique user-specified names for sections
 within the configuration file, as well as some reserved section names.
 
 The top-level of the hierarchy consists of three reserved-named sections,
 "MEDLINE", "SEQUENCE", and "LINKS", each of which contain a single _field_,
 "CHANNELS". Channels are used to specify the mechanisms by which the
 corresponding types of data can be obtained. For example, considering the
 Entrez:MEDLINE and Entrez:Sequences CDs, it is possible to obtain some
 MEDLINE information from either CD, but Sequence information may only be
 obtained from the Entrez:Sequences CD. Therefore, the value of the channels
 field for MEDLINE will contain two user-defined channel names, but the value
 of the channels field for SEQUENCE will only contain one such channel name.
 
 Each name listed on the right-hand-side of "CHANNELS=" must corresponding
 to a section-name at the second-level of the hierarchy; the "Channels"
 level. Each Channel-level entry consists of a list of priorities for 
 the possible types of data associated with that channel. Priorities are used
 by the Entrez software to determine which Channel it should attempt to
 use for obtaining the corresponding data. A priority of 0 indicates that
 this channel should never be used to obtain this data. For positive values,
 a higher priority indicates a preference for that data channel. For example,
 the Channel for obtaining MEDLINE records from the Entrez:Sequences disc
 might have priority 1, while the corresponding Channel associated with
 the Entrez:MEDLINE disc might have priority 2, because the latter is a better
 source for this data. The integer-valued priorities may optionally be
 followed by a comma and the keyword "NO_DRASTIC_ACTION". This means that,
 if the priority for this channel is higher than any other, but a "drastic
 action" would need to be taken to make this channel active (like ejecting
 a different CD-ROM), then a channel with lower priority may be deferred to
 (e.g., if the corresponding CD-ROM is currently inserted).
 
 The possible data types for MEDLINE and SEQUENCE channels are:
     RECORDS   - Entire MEDLINE abstracts, or Sequence entries; these
                 corresponding to double-clicking on a document summary
                 in the Documents window
     DOCSUMS   - A document summary; these appear as a scrolled list in
                 the document summary window
     TERMS     - These are the terms specified in term selection in the
                 Query window
     BOOLEANS  - This is the operation performed during query refinement
 The default priority for an unreferenced data type (e.g., TERMS) is 1.
 
 A LINKS channel consists of an "INFO" priority, used to access global
 information about Entrez status, and a set of links relationships. Links
 relationships are specified by the "from" name, followed by two underscores,
 followed by the "to" name. For example, the name for MEDLINE to SEQUENCE
 links is "MEDLINE__SEQUENCE". The default priority for these double-underscored
 names is 0, while the default priority for "INFO" is 1.
 
 Each Channel section must also contain a "MEDIA" field. This references
 the lowest-level level in the hierarchy, Media.
 
 A Media, in turn, contains a "TYPE" field (currently this value must be either
 CD or HARDDISK), and a set of fields which correspond to much of the original
 set of fields which appeared in the "NCBI" section of the old-style
 configuration field (namely: IDX, ROOT, etc.). There is an additional field,
 "VAL", which must point to the filename for CDROMDAT.VAL. The default value for
 "VAL" is the value specified by "ROOT".
 
 A media section must also contain the field "FORMAL_NAME", which is
 the formal name to be used for that media when the software addresses the
 user (e.g. "Entrez:MEDLINE CD-ROM"). A media section may also contain
 one or more fields of the form "DRASTIC_TO_mmm=1", where mmm is the
 section name of another media. This is used in conjunction with the
 "NO_DRASTIC_ACTION" option which may appear in some Channel fields.
 For example, within a Media section "ENTREZ_MED_CD", the field
 "DRASTIC_TO_ENTREZ_SEQ_CD" means that it is considered to be a drastic
 action to switch from the Entrez:MEDLINE CD-ROM to the Entrez:Sequences
 CD-ROM.
 
 The "NCBI" section  must contain the DATA and ASNLOAD entries, indicating
 where the data files and ASN.1 object loader definitions are to be found.
 In addition, the "NCBI" section must contain a "MEDIA" field, which is
 a comma-separated list of all the Media which will be used. Note that
 this constitutes a deviation from the 3-level model mentioned earlier.
 
 A discussion of the pathname redirection used in both old and new-style
 configuration files is in order here, since it has never been fully
 documented on earlier CD-ROMs or CD-ROM documentation. The pathname
 specification field names are: "ROOT", "IDX", "TRM", "MED", "SEQ", "LNK".
 All pathnames default as being relative to the directory specified by
 "ROOT", which is a mandatory field. The remaining fields, which are all
 optional, override the pathname specified by "ROOT" for a specific set of files,
 as follows:
 * IDX    - Index files
 * TRM    - Term list files (and their associated indices and "posting files")
 * MED    - ASN.1 data for MEDLINE documents
 * SEQ    - ASN.1 data for sequence documents
 * LNK    - Links among related documents
 *